Description
Product Overview
The iFJF 6PK2195 6 Ribs Serpentine Belt is a precision-engineered EPDM drive belt measuring 86.45 inches (2195mm) in effective length. Designed as a direct-fit replacement for worn or cracked serpentine belts, this 6-rib belt delivers reliable power transmission to your vehicle's alternator, power steering pump, A/C compressor, and water pump.
Constructed from high-grade EPDM (Ethylene Propylene Diene Monomer) rubber compound, this belt offers superior resistance to heat, ozone, and abrasion — critical for modern engines operating at elevated temperatures. The precision-molded ribs ensure optimal grip on pulleys, reducing slippage and extending service life.
Key Features
-
Premium EPDM Construction — Heat-resistant, crack-resistant, and built for long-term durability in demanding engine environments
-
6-Rib Precision Design — Molded ribs provide maximum surface contact with pulleys for quiet, efficient power transfer
-
OE-Spec Performance — Meets or exceeds OEM specifications for fit, tension, and wear resistance
-
Super-Silent Operation — Precision-engineered rib profile minimizes noise and vibration
-
Broad Vehicle Compatibility — Fits dozens of popular makes and models (see compatibility table below)
-
Easy Installation — Direct drop-in replacement; no modifications required
Vehicle Compatibility
This 6PK2195 6 Ribs serpentine belt is compatible with the following vehicles (partial list — verify your belt length before ordering):
| Make |
Model Years |
| Rendezvous |
2002-2005 |
| DeVille |
1991-1993 |
| Eldorado |
1991-1993 |
| Fleetwood |
1991-1992 |
| Seville |
1991-1994 |
⚠️ Always measure your existing belt or check your owner's manual for the correct belt length (86.45 inches / 2195mm) before purchasing.
Technical Specifications
| Part Number |
6PK2195 |
| Rib Count |
6 Ribs |
| Effective Length |
2195mm (86.45 inches) |
| Material |
EPDM (Ethylene Propylene Diene Monomer) |
| Cross-Section |
PK Profile (Automotive Multi-Rib) |
| OE Cross-References |
6PK2195, 5060210, K06210, 4060210 |
Why Choose iFJF Serpentine Belts?
-
Quality You Can Trust — Every iFJF belt undergoes rigorous quality control testing for dimensional accuracy, tensile strength, and heat resistance.
-
Direct-Fit Design — No modifications, no adapters, no hassle. Remove the old belt and install the new one using your vehicle's belt routing diagram.
-
Quiet & Smooth — Precision rib geometry ensures whisper-quiet operation without the squealing or chirping of inferior belts.
-
Long Service Life — EPDM construction resists cracking, glazing, and stretching better than traditional neoprene belts.
-
Value Pricing — OE-quality performance at a fraction of dealership pricing.
Installation Tips
-
Check Your Belt Length First — Measure your old belt or verify the part number in your owner's manual. The correct size for this belt is 2195mm (86.45" effective length).
-
Inspect Pulleys & Tensioner — Worn pulleys or a weak tensioner can cause premature belt wear. Replace any questionable components while you're in there.
-
Follow the Belt Routing Diagram — Most vehicles have a belt routing sticker under the hood. If not, take a photo of the old belt before removal.
-
Use the Proper Tool — A serpentine belt tool or long-handled ratchet makes tensioner release much easier.
-
Double-Check Alignment — After installation, ensure the belt sits squarely on all pulleys before starting the engine.
Frequently Asked Questions
Q: Will this 6 Ribs belt fit my vehicle?
A: This belt measures 2195mm (86.45 inches) effective length with a 6-rib PK profile. Check your owner's manual or measure your existing belt — if it's a 6-rib belt measuring 86.45 inches, it will fit. The belt is compatible with Rendezvous, DeVille, Eldorado and many other makes as listed in our compatibility table above.
Q: What's the difference between EPDM and neoprene belts?
A: EPDM (Ethylene Propylene Diene Monomer) belts offer significantly better heat resistance, ozone resistance, and crack resistance compared to traditional neoprene belts. Modern engines run hotter, and EPDM belts are designed to handle these elevated temperatures without premature failure. EPDM belts also maintain tension better over time, reducing the need for re-tensioning.
Q: How do I know when my serpentine belt needs replacement?
A: Look for these warning signs: (1) visible cracks, fraying, or glazing on the ribbed side, (2) squealing or chirping noises from the engine bay, especially on cold starts, (3) loss of power steering assist or A/C performance, (4) battery warning light (alternator not charging properly), (5) the belt has exceeded 60,000-100,000 miles since last replacement.
Q: Can I install this belt myself?
A: Yes! Serpentine belt replacement is a DIY-friendly job for most vehicles. You'll need a serpentine belt tool or ratchet to release the tensioner, and about 30 minutes. Always reference your vehicle's belt routing diagram (usually located on a sticker under the hood). If you're unsure, professional installation is recommended.
Q: Does this belt come with a warranty?
A: Yes, all iFJF serpentine belts are backed by our satisfaction guarantee. If you experience any manufacturing defects, contact us for a replacement. Normal wear and tear is not covered.
Q: How does this compare to OEM belts?
A: Our iFJF 6PK2195 belt meets or exceeds OEM specifications for dimensional accuracy, material quality, and performance. You get dealership-quality performance at a significantly lower price point. The EPDM compound we use is the same material specified by most major automakers for their OEM serpentine belts.
Explore Related Products
🛒 Related Products & Resources
💡 Tip: Serpentine belts should be inspected every 60,000-100,000 miles. Replace if you see cracks, glazing, or hear squealing noises.
