Search results for "Multiport Valves"

Product Overview Protect your engine with the 3Pcs PF2129G 3.6L Oil Filter Cartridge PF2129 PF2129GF PF2130 92149006 for GMC Cadilla-c Chevrole-t Sports Utility Vehicle Truck LFX LY7 Engine from iFJF. This premium oil filter delivers exceptional filtration efficiency — capturing harmful contaminants while maintaining optimal oil flow for maximum engine protection. Engineered as a direct OEM replacement for PF2129G, PF2129, PF2129G, PF2130. The high-capacity synthetic blend filtration media traps particles as small as 25 microns, protecting bearings, camshafts, and cylinder walls from premature wear. Whether you're doing a routine oil change or preparing for a cross-country trip, this filter provides the reliable protection your engine deserves. Key Features High-Efficiency Filtration: Multi-layer synthetic blend media captures 99% of harmful contaminants Anti-Drainback Valve: Silicone valve prevents dry starts by keeping oil in the filter when engine is off Heavy-Duty Canister: Burst-resistant design withstands pressure spikes during cold starts Precision Fit: CNC-machined base plate with pre-lubricated O-ring gasket for leak-free installation Direct OEM Replacement: Matches exact OEM dimensions, thread pitch, and bypass valve settings Wide Compatibility: Fits multiple vehicle makes and models — verify using OEM part numbers Specifications Specification Detail Part Type Engine Oil Filter OEM Cross-References PF2129G, PF2129, PF2129G, PF2130 Filter Media Synthetic Blend Cellulose Anti-Drainback Valve Silicone Rubber Bypass Valve Yes — prevents oil starvation Quantity 3-Pack (Multi-Pack Value) Installation Guide Warm up engine for 2-3 minutes to thin the oil for better drainage Drain old oil completely before removing the old filter Apply a thin film of clean oil to the new filter's gasket Hand-tighten until gasket contacts, then turn 3/4 to 1 full turn more Refill engine with fresh oil, start engine, and check for leaks Why Choose iFJF Oil Filters? Quality Tested: Every filter undergoes burst pressure and filtration efficiency testing OEM-Equivalent: Same quality as dealer filters at a fraction of the price US-Based: Ships from US warehouses with real-time tracking 30-Day Guarantee: Not satisfied? We'll make it right — free replacement or refund Frequently Asked Questions Q: How often should I replace this oil filter?A: Replace with every oil change — typically every 5,000-7,500 miles for synthetic oil or 3,000-5,000 for conventional. Always follow your manufacturer's maintenance schedule. Q: Is this a direct OEM replacement?A: Yes. Engineered to meet or exceed OEM specifications for fit, thread pattern, gasket diameter, and bypass valve pressure setting. Q: Does this filter work with synthetic oil?A: Yes. The filter media is compatible with both conventional and full synthetic oils, maintaining integrity even under extended drain intervals. Q: What is the filtration efficiency?A: This filter captures particles down to 25 microns with 99% efficiency, protecting critical engine components from wear. Q: How do I know if it fits my vehicle?A: Cross-reference the OEM part numbers listed in the product title. If your vehicle uses any of these numbers, this filter will fit. Q: Is there a warranty?A: Yes — iFJF offers a 30-day satisfaction guarantee. Free replacement or full refund if you're not satisfied. 🔗 Related Products Looking for more? Browse our related products or check out our Best Sellers.

Read more less

Onan RV Generator Complete Tune-Up Kit — All Filters + Spark Plug Keep your Onan RV generator running reliably with the iFJF Complete Tune-Up Kit. This all-in-one maintenance package includes everything you need for a full generator service: air filter, oil filter, fuel filter, and spark plug — all in one box at a fraction of OEM prices. What's Included 140-3116 Air Filter: High-capacity pleated paper element — traps dust and debris before they enter the combustion chamber 122-0836 Oil Filter: Full-flow spin-on lube filter with silicone anti-drainback valve 149-2341-01 Fuel Filter: Inline fuel filter with 10-micron filtration — protects the carburetor from fuel-borne contaminants 167-1638 Spark Plug: Pre-gapped copper-core spark plug for reliable ignition in all conditions Generator Compatibility Generator Series Models Onan QG Series 5500 (HGJAA, HGJAB), 7000 (HGJAD) Onan Marquis Gold 5500, 7000 RV QG Onan Marquis Platinum QG EFI models Why Regular Generator Maintenance Matters RV generators sit unused for months, then are expected to perform flawlessly during camping season. Stale fuel, moisture accumulation, and oil degradation are real threats. A dirty air filter reduces power output and increases fuel consumption. An old oil filter can't protect against sludge buildup. A worn spark plug causes hard starts and misfires. This kit addresses all three at once — recommended every 100 hours or annually, whichever comes first. Installation Tips Oil Change: Run the generator for 5 minutes to warm the oil, then drain and replace the filter. Use SAE 15W-40 diesel-rated oil (approximately 1.6 quarts for QG 5500, 2.0 quarts for QG 7000) Air Filter: Simply unscrew the air cleaner cover, remove the old element, and drop in the new one Fuel Filter: Pinch the fuel line before removing the old filter to minimize fuel spillage. Arrow on the new filter points toward the carburetor Spark Plug: Gap should be 0.030" (0.76mm). Torque to 15 ft-lbs After Service: Run the generator under load for 15 minutes to verify everything is working FAQ Q: Will this kit work for my Onan 4000 MicroQuiet?A: No. This kit is specifically for QG 5500/7000 and Marquis Gold series. The MicroQuiet 4000 uses different part numbers. Q: How often should I perform this tune-up?A: Every 100 hours of generator run time, or at least once per year before camping season. If you use your generator frequently in dusty conditions, consider more frequent air filter changes. Q: Are these genuine Onan/Cummins parts?A: These are premium aftermarket replacements manufactured to meet or exceed OEM specifications. Cross-reference: Cummins Onan 140-3116, 122-0836, 149-2341-01, 167-1638. Q: Does this include the oil?A: No. Oil is sold separately. We recommend SAE 15W-40 diesel-rated oil for optimal performance. Q: Is this kit compatible with propane (LP) generators?A: The air filter, oil filter, and spark plug are compatible. The fuel filter is for gasoline models only — LP generators don't use an inline fuel filter.Related Products Fuel Filter Housing for 2005-2013 Duramax 6.6L — 2500HD/3500HD 29531007 GMC, Ram 6.6L 2500HD, Duramax, Sierra, 2500, Silverado U58/9KIT Car Urea Filter Diesel Fuel Filter for A0001421089 2265672 2655824 1421 122-0833 Oil Filter for Cummins Onan RV Generator QD 3200 6000 8000 10000 12500 140-2897 Air Filter 3-Pack for Onan QD/HQD Generator Series 📖 Related Guide 122-0836 Oil Filter Buying Guide & Cross-Reference — Complete compatibility list, price comparison, and DIY oil change walkthrough for Onan QG 5500/7000 generators.

Read more less

Product OverviewPrecision-engineered EGR block-off delete plug kit for 1985-1988 Chevy 305 TPI (5.0L) and 1987-1988 350 TPI (5.7L) engines in Camaro, Firebird, and C4 Corvette. These TPI engines are notorious for EGR passage clogging causing rough idle, hesitation, and hard hot starts. Our billet block-off plugs provide a permanent, leak-free solution. For off-road and competition use only. Key Features TPI-Specific Design: CAD-engineered to exact 305/350 TPI EGR port dimensions — no universal adapters needed. Billet Construction: Machined from solid billet aluminum — vastly superior to thin stamped steel plates that warp under heat. Resolves Common TPI Issues: Eliminates EGR-related rough idle, part-throttle hesitation, and carbon-clogged intake passages. Complete Plug Kit: Includes EGR valve block-off plug, EGR tube plug, and required gaskets for complete system removal. Compatibility Make Model Engine Year Chevrolet Camaro, Corvette 305 TPI (5.0L) 1985-1988 Chevrolet Camaro, Corvette 350 TPI (5.7L) 1987-1988 Pontiac Firebird, Trans Am 305/350 TPI 1985-1988 Specifications Specification Detail Material Billet Aluminum Application 305/350 TPI EGR Block-Off Fitment 1985-1988 Camaro/Firebird/Corvette Usage Off-Road / Competition Only ⚠️ Off-Road/Competition Use Only. Not CARB-compliant. Check local emissions regulations. Frequently Asked QuestionsQ: Will this fit my 1989 TPI engine?A: This kit is for 1985-1988 TPI engines. 1989+ TPI uses a different EGR mounting pattern. Q: Does installation require removing the intake manifold?A: No. The EGR valve is externally mounted. Basic hand tools, approximately 45-60 minutes. Q: Is an EGR simulator required?A: Yes, removing EGR will trigger a CEL. An EGR simulator or custom PROM chip is recommended. Q: What is your return policy?A: 30-day return policy for unused items in original packaging. Contact us for replacement or refund. Q: How fast is shipping?A: Ships within 1-2 business days from US warehouse. Standard: 3-7 days. Q: Do you offer warranty?A: Yes, 1-year warranty against manufacturing defects. Order with ConfidenceAdd to cart now — free shipping on orders $50+. Contact our support team within 24h for fitment questions.

Read more less

7.3L Powerstroke Fuel Pressure Regulator Blue Spring Upgrade Kit Restore proper fuel pressure in your 1999-2003 Ford 7.3L Powerstroke diesel with this complete blue spring upgrade kit. The OEM fuel pressure regulator spring loses tension over time, causing low fuel pressure that starves injectors and leads to premature failure. This billet aluminum kit replaces the factory housing and spring with upgraded components designed to maintain consistent 60-65 PSI fuel pressure for optimal injector performance and extended service life. Key Features CNC-Machined Billet Aluminum Housing: Replaces the failure-prone OEM stamped steel cap with precision-machined 6061 aluminum for superior durability and leak-free sealing. Upgraded Blue Spring: Higher-rate spring maintains 60-65 PSI fuel pressure under load — the ideal range for 7.3L HEUI injectors. Complete Rebuild Kit: Includes billet cap, blue spring upgrade, Viton O-ring kit, Vibro-Loc seal, and brass poppet valve — everything needed for a full rebuild. Extends Injector Life: Consistent fuel pressure prevents lean conditions that cause injector tip erosion and premature failure. Easy Installation: Direct bolt-on replacement for the factory fuel pressure regulator — no modifications required. (Professional installation recommended) Compatibility Year Make Model Engine 1999-2003 Ford F-250 Super Duty 7.3L Powerstroke V8 Diesel 1999-2003 Ford F-350 Super Duty 7.3L Powerstroke V8 Diesel 1999-2003 Ford F-450 Super Duty 7.3L Powerstroke V8 Diesel 1999-2003 Ford F-550 Super Duty 7.3L Powerstroke V8 Diesel 2000-2003 Ford Excursion 7.3L Powerstroke V8 Diesel Specifications Specification Detail Material 6061-T6 Billet Aluminum (Cap), High-Strength Steel (Spring), Viton (O-Rings) Target Fuel Pressure 60-65 PSI Spring Type Blue Spring (Upgraded Rate) Installation Direct bolt-on — Professional installation recommended Includes Billet Cap + Blue Spring + O-Ring Kit + Vibro-Loc Seal + Brass Poppet Valve Why Choose iFJF? Premium Materials: CNC-machined billet aluminum — not stamped steel like OEM. Proven Upgrade: The "blue spring" modification is the go-to fix recommended by 7.3L Powerstroke communities and diesel mechanics. Lifetime Support: Free technical support for the life of your vehicle. Frequently Asked Questions Q: What symptoms indicate I need the blue spring upgrade?A: Common signs include hard starting, rough idle, low power under load, and injector "cackle." If your fuel pressure drops below 45 PSI at WOT, the regulator spring has weakened and should be replaced immediately. Q: Will this fit my 2002 F-350 7.3L?A: Yes. This kit fits all 1999-2003 Ford 7.3L Powerstroke engines in F-250 through F-550 and 2000-2003 Excursion models. Q: What fuel pressure should I see after installation?A: You should see 60-65 PSI at idle and no less than 55 PSI under wide-open throttle. This is the optimal range for HEUI injector operation. Q: Do I need a fuel pressure gauge to install this?A: A fuel pressure gauge is strongly recommended to verify proper pressure before and after installation. The 7.3L has no factory fuel pressure sensor. Q: How difficult is the installation?A: Moderate difficulty — approximately 1-2 hours with basic hand tools. The regulator is located on the fuel bowl at the front of the engine valley. Related Products 7.3L Powerstroke Coolant Filtration System & Filter Kit

Read more less

Product OverviewUpgraded 3-inch mandrel-bent aluminum air intake elbow charge pipe for 1994-1998 Dodge Ram 2500/3500 with the 5.9L 12-valve Cummins. The restrictive factory intake elbow limits airflow and increases turbo lag. Our smooth-flowing 3-inch replacement improves airflow, reduces EGTs, and delivers crisper throttle response. Key Features 3-Inch Mandrel-Bent Flow: Smooth internal surface maximizes airflow for improved turbo spool and reduced EGTs under load. Aluminum Construction: Lightweight, corrosion-resistant with durable powder-coated finish. Direct Bolt-On: Factory mounting points — installs in ~30 minutes with basic hand tools. Compatibility Make Model Engine Year Dodge Ram 2500, Ram 3500 5.9L 12V Cummins 1994-1998 Specifications Specification Detail Material Mandrel-Bent Aluminum Diameter 3 Inches Application 1994-1998 Dodge Ram 5.9L 12V Cummins Installation Bolt-On ~30 Minutes Why Choose iFJFAt iFJF Direct, we supply diesel performance parts engineered for reliability. 1-year warranty. Fast US shipping. Frequently Asked QuestionsQ: Does this fit 24V (1998.5+) Cummins?A: No, this elbow is for 1994-1998 12-valve engines. 24V models use a different intake horn. Q: What is your return policy?A: 30-day return policy for unused items in original packaging. Contact us for replacement or refund. Q: How fast is shipping?A: Ships within 1-2 business days from US warehouse. Standard: 3-7 days. Q: Do you offer warranty?A: Yes, 1-year warranty against manufacturing defects. Order with ConfidenceUnlock your 12V's potential! Free shipping on orders $50+. Contact us for fitment questions.

Read more less

Product Overview This complete crankcase gasket replacement set is engineered for Briggs & Stratton small engines. The kit includes all necessary gaskets and seals for a full crankcase reseal, ensuring proper compression and oil sealing on your lawn and garden equipment engines. Manufactured to OEM specifications, this gasket kit replaces Briggs & Stratton part numbers 594195, 591911, and 697227. Compatible with 09P702, 550EX, 625EX, 675EX, and other 140cc-190cc engines found in walk-behind mowers, pressure washers, and generators. Key Features Complete Kit: Includes all crankcase gaskets, oil seals, and O-rings needed for a full reseal. OEM-Spec Materials: Manufactured to match original Briggs & Stratton specifications for material thickness and compression. Precision Die-Cut: Each gasket is die-cut for exact bolt hole and port alignment. Oil & Heat Resistant: Gasket materials withstand continuous exposure to engine oil at operating temperatures up to 350°F. Multi-Model Compatibility: Fits Briggs & Stratton 09P702, 550EX, 625EX, 675EX series and other 140cc engines. Compatibility Brand Engine Series Replaces OEM # Briggs & Stratton 09P702, 550EX, 625EX, 675EX 594195 Briggs & Stratton 140cc Vertical/Horizontal 591911 Briggs & Stratton Various Small Engines 697227 Verify your engine model number (stamped on the engine shroud) before ordering. Technical Specifications Specification Detail Kit Type Complete Crankcase Gasket Set OEM Part # 594195, 591911, 697227 Compatible Engines B&S 09P702, 550EX, 625EX, 675EX, 140cc Warranty 1-Year Limited Warranty Why Choose iFJF Gasket Kits? Oil leaks from a failing crankcase gasket can destroy your small engine in minutes if the oil level drops too low. A complete reseal with a quality gasket kit costs far less than a replacement engine — and our kits include everything you need in one package. Frequently Asked Questions Q: Does this kit include the oil seals?A: Yes — this complete crankcase gasket kit includes all crankcase gaskets, crankshaft oil seals, O-rings, and any applicable cover gaskets needed for a full reseal. Q: Will this fit my Briggs & Stratton engine?A: This kit is designed for Briggs & Stratton 09P702, 550EX, 625EX, 675EX and other 140cc engines. Check your engine model number (stamped on the metal shroud above the spark plug) before ordering. Q: How difficult is crankcase gasket replacement?A: Moderate difficulty. Requires removing the engine from equipment, draining oil, and disassembling the crankcase. Experience with small engine repair is recommended. You'll need basic hand tools, a torque wrench, and a gasket scraper. Q: Do I need to use gasket sealer with these gaskets?A: No — these gaskets are designed to seal without additional sealant. However, applying a thin film of oil-resistant RTV at critical corners is good practice for a leak-free seal. Q: What are signs I need new crankcase gaskets?A: Oil leaking from the crankcase seam, oil consumption without visible smoke, oil residue on the engine exterior, and low oil level between changes are all indicators of failing crankcase gaskets. Related Products Engine Parts & Gaskets — small engine repair parts Auto Parts & Accessories — browse our full catalog Stop Oil Leaks — Fix It Right Fast Shipping • OEM-Spec Quality • 1-Year Warranty

Read more less

6-Pack 5083285AA Oil Filter Value Bundle — 2007-2024 Ram 6.7L Cummins The 6-Pack 5083285AA Oil Filter Value Bundle delivers six premium OEM-spec oil filters engineered for Ram trucks with the 6.7L Cummins turbo diesel engine. Designed for fleet operators, independent repair shops, and DIY owners, this bulk pack saves you 20-30% versus buying individual filters. Key Features OEM-Spec Filtration: Multi-layer cellulose/synthetic blend media captures 99% of contaminants down to 25 microns. Silicone Anti-Drainback Valve: Prevents dry starts by keeping oil in the filter during shutdown — critical for Cummins turbo protection. Heavy-Duty Steel Canister: 0.6mm steel with corrosion-resistant coating handles high oil pressures up to 100 PSI cold start. High-Capacity Design: 1.5-quart capacity with 15-20 micron nominal rating for extended intervals up to 15,000 miles. Fleet-Ready Packaging: Each filter individually sealed; 6 per master case. Compatibility Year Make Model Engine 2007-2024 Ram 2500 6.7L Cummins I6 Turbo Diesel 2007-2024 Ram 3500 6.7L Cummins I6 Turbo Diesel 2007-2024 Ram 4500/5500 6.7L Cummins I6 Turbo Diesel 2007-2010 Dodge Ram 2500/3500 6.7L Cummins I6 Turbo Diesel Cross-Reference Numbers Brand Part Number Mopar (OEM) 5083285AA, 5016547AA, 5093092AA Fleetguard LF16035 WIX 57060XP Baldwin B7379 Frequently Asked Questions Q: Will this fit my 2018 Ram 2500 6.7L?A: Yes. This filter fits ALL 2007-2024 Ram 2500/3500/4500/5500 trucks with the 6.7L Cummins turbo diesel engine. Q: How often should I change the oil filter?A: Every oil change — 15,000 miles or 12 months (normal), 7,500 miles or 6 months (severe service/towing). Never reuse an oil filter. Q: Does this work with synthetic oil?A: Yes. Fully compatible with conventional 15W-40 and synthetic 5W-40 diesel oils. Q: What torque for installation?A: Hand-tighten + 3/4 to 1 full turn. Approx 18-22 ft-lbs. Do not use a filter wrench to tighten.Related Products 🔧 Fuel + Oil Filter Kit for 2019-2020 Ram 6.7L 🔧 6A320-58830 Fuel Filter for Kubota Tractors 🔧 Ford 6.7L Powerstroke Fuel Water Separator FD-4615 Related Guides & Articles 📖 Complete Ram 6.7L Cummins Oil Change Guide 📖 Diesel Engine Maintenance Schedule: What to Replace & When

Read more less

Product Overview The iFJF 6.0L Powerstroke Coolant Filtration + EGR Delete Combo Kit addresses two of the most critical reliability issues on the 2003-2007 Ford 6.0L Powerstroke diesel engine. This bundle includes a high-capacity coolant filtration system to capture casting sand and debris that clog the oil cooler, plus an EGR eliminator spool with bolts and O-rings to permanently remove the failure-prone EGR valve. Together, these upgrades significantly improve engine longevity and reliability. Off-road and competition use only. What's Included Coolant Filtration System — Billet aluminum filter head with mounting bracket, WIX 24070 / NAPA 4070 compatible spin-on filter, silicone hoses, and all necessary fittings. EGR Eliminator Spool — CNC-machined aluminum spool to replace the EGR valve, eliminating the most common 6.0L failure point. Bolts & O-Rings — All mounting hardware and Viton O-rings for a leak-free installation. Installation Instructions — Step-by-step guide with torque specifications. Key Benefits Prevents Oil Cooler Failure — The #1 cause of 6.0L Powerstroke oil cooler failure is casting sand and debris in the cooling system. This filtration system captures contaminants before they reach and clog the oil cooler. Eliminates EGR Valve Failure — The 6.0L EGR valve is notorious for sticking, clogging with soot, and causing performance issues. The eliminator spool permanently removes this failure point. Lower Operating Temperatures — Deleting the EGR system reduces coolant temperatures by eliminating recirculated exhaust gas heat. Combined with clean coolant, your engine runs cooler and more efficiently. Improved Reliability — The two most common 6.0L roadside breakdown causes — clogged oil cooler and stuck EGR valve — are addressed in one comprehensive kit. Cleaner Coolant, Longer Life — The spin-on filter captures particles down to 20 microns, keeping your coolant system cleaner for extended service intervals. Compatibility Year Make Model Engine 2003-2007 Ford F-250 Super Duty 6.0L Powerstroke V8 Diesel 2003-2007 Ford F-350 Super Duty 6.0L Powerstroke V8 Diesel 2003-2007 Ford F-450 Super Duty 6.0L Powerstroke V8 Diesel 2003-2007 Ford F-550 Super Duty 6.0L Powerstroke V8 Diesel 2003-2005 Ford Excursion 6.0L Powerstroke V8 Diesel Specifications Component Specification Filter Head Material Billet 6061 Aluminum Filter Type Spin-On (WIX 24070 / NAPA 4070 Compatible) Filtration Rating 20 Micron Nominal EGR Spool Material CNC-Machined Aluminum Alloy O-Rings Viton (High-Temp Resistant) Hoses Reinforced Silicone, High-Temp Rated Fitment 2003-2007 Ford 6.0L Powerstroke SKU ER-0215 Installation Overview Coolant Filtration: Mounts inline on the heater core return hose. Requires basic hand tools and coolant drain/fill. Estimated install time: 1-1.5 hours. EGR Eliminator Spool: Replaces the EGR valve directly on the intake manifold. Access from top of engine bay. Estimated install time: 30-45 minutes. Professional installation recommended. ECU tuning required after EGR delete to prevent check engine light and limp mode. Frequently Asked Questions Q: Why do I need a coolant filtration system on my 6.0L?A: Ford's 6.0L Powerstroke engine blocks were cast using a sand-casting process. Residual casting sand remains in the cooling passages and circulates through the system, eventually clogging the oil cooler — the #1 cause of 6.0L engine failure. A coolant filter captures this debris before it causes damage. Q: Will the EGR delete trigger a check engine light?A: Yes. Removing the EGR system will set diagnostic trouble codes (DTCs). ECU tuning is required to disable EGR-related codes and prevent the engine from entering limp mode. This kit includes the hardware only — tuning is sold separately. Q: Is this kit legal for on-road use?A: No. EGR delete kits and emissions system modifications are intended for OFF-ROAD / COMPETITION USE ONLY. They are not legal for on-road vehicles in the United States under EPA and CARB regulations. Please verify your local laws. Q: How often should I change the coolant filter?A: Replace the filter after the first 500 miles (initial break-in captures the most debris), then every 6 months or 7,500 miles thereafter. Use WIX 24070 or NAPA 4070 replacement filters. Q: Do I need to remove the EGR cooler too?A: This kit addresses the EGR valve only. For maximum reliability, we recommend also deleting the EGR cooler (sold separately or as part of our full EGR delete kits). A stuck-open EGR cooler can still cause coolant loss and hydro-lock risk. Q: Can I install this myself?A: If you are comfortable with basic automotive maintenance, both components can be installed in a home garage with standard hand tools. A coolant drain pan, basic socket set, and torque wrench are required. Full instructions are included.

Read more less

Complete EGR Delete Solution for 2013-2018 Dodge Ram 6.7L Cummins Turbo Diesel Upgrade your 2013-2018 Dodge Ram 2500 or 3500 with the 6.7L Cummins Turbo Diesel using this professional-grade EGR delete kit. Designed to eliminate the restrictive and failure-prone factory EGR (Exhaust Gas Recirculation) system, this kit restores engine efficiency, reduces carbon buildup, and unlocks the full performance potential of your Cummins powerplant. Why Delete Your 6.7L Cummins EGR System? The factory EGR system on the 6.7L Cummins recirculates hot exhaust gases back into the intake manifold. While intended to reduce NOx emissions, this system causes: Carbon Buildup: Soot and carbon deposits accumulate in the intake manifold, throttle valve, and EGR cooler, restricting airflow and reducing power over time. Coolant Contamination: The EGR cooler is prone to internal failure, allowing coolant to mix with exhaust gases and enter cylinders – a leading cause of head gasket failure on 6.7L Cummins engines. Reduced Fuel Economy: Recirculated exhaust gas displaces clean intake air, reducing combustion efficiency and increasing fuel consumption by 1-3 MPG. Throttle Valve Restriction: The factory throttle valve creates unnecessary intake restriction, limiting turbo spool and throttle response. Increased Maintenance Costs: EGR-related repairs on 6.7L Cummins engines are well-documented, with cooler replacements averaging $1,500-$2,500 at dealerships. What's Included in This Kit Component Material Function EGR Cooler Block-Off Plates CNC Billet 6061-T6 Aluminum Seals EGR cooler ports at intake and exhaust manifold Throttle Valve Delete CNC Billet 6061-T6 Aluminum Replaces restrictive factory throttle valve with straight-flow design Coolant Bypass Adapter CNC Billet 6061-T6 Aluminum Maintains proper coolant routing after EGR cooler removal Mounting Hardware Grade 10.9 Steel All gaskets, bolts, and O-rings for complete installation Vehicle Compatibility Year Make Model Engine 2013-2018 Dodge / Ram 2500 6.7L Cummins Turbo Diesel I6 2013-2018 Dodge / Ram 3500 6.7L Cummins Turbo Diesel I6 2013-2018 Dodge / Ram 4500 6.7L Cummins Turbo Diesel I6 2013-2018 Dodge / Ram 5500 6.7L Cummins Turbo Diesel I6 Premium Build Quality CNC-Machined 6061-T6 Billet Aluminum: Precision-engineered for exact fitment. Unlike stamped steel competitors, our billet plates won't warp under extreme heat cycling. Corrosion-Resistant Finish: Anodized surface treatment protects against oxidation and road salt corrosion in harsh environments. OEM-Spec Gaskets: Multi-layer steel (MLS) gaskets provide a leak-free seal rated for turbo diesel boost pressures exceeding 40 PSI. Grade 10.9 Hardware: High-tensile bolts and studs designed to withstand the thermal expansion and vibration of the 6.7L Cummins platform. Installation Overview This EGR delete kit is designed for experienced DIY mechanics and professional shops. Estimated installation time: 3-5 hours with basic hand tools. No welding or permanent modifications required – the kit is fully bolt-on and reversible. We recommend referencing a Cummins 6.7L service manual and following all safety procedures when working on your vehicle's emissions system. Performance Benefits Increased Horsepower & Torque: Eliminates intake restriction, allowing the turbocharger to spool faster and the engine to breathe cleaner, denser air. Improved Fuel Economy: Owners report 1-3 MPG improvement after EGR delete on 6.7L Cummins applications. Lower EGTs: Reduced exhaust gas temperatures by eliminating hot EGR recirculation – critical for towing and heavy-load operation. Cleaner Engine Oil: No more soot contamination from EGR, extending oil life and protecting critical engine bearings. Eliminated Coolant Loss Risk: Removes the EGR cooler – a known failure point that can lead to catastrophic head gasket damage. Frequently Asked Questions Q: Will this kit fit my 2018 Ram 3500 with the 6.7L Cummins?A: Yes. This kit is designed for all 2013-2018 Ram 2500, 3500, 4500, and 5500 trucks equipped with the 6.7L Cummins Turbo Diesel engine. It fits both the 68RFE automatic and G56 manual transmission variants. Q: Do I need a tuner after installing this EGR delete kit?A: Yes. The factory ECM will detect EGR system changes and may trigger a check engine light. A compatible tuner or ECM calibration is recommended to disable EGR-related diagnostic trouble codes (DTCs) and optimize engine parameters for the delete configuration. Q: Is this a complete kit with everything I need?A: Yes. This kit includes all EGR cooler block-off plates, throttle valve delete, coolant bypass adapter (where applicable), gaskets, O-rings, and Grade 10.9 mounting hardware. No additional parts required. Q: How does this compare to cheaper stamped steel kits?A: Our CNC-machined 6061-T6 billet aluminum plates maintain perfect flatness under extreme heat cycling – a critical advantage over stamped steel plates that can warp and leak over time. The premium anodized finish also provides superior corrosion resistance. Q: What are the signs my 6.7L Cummins EGR cooler is failing?A: Common symptoms include unexplained coolant loss, white smoke from the exhaust (coolant burning in cylinders), rough idle, and rising engine temperatures. If you notice these signs, replacing the EGR system should be a priority. Q: Can I install this kit myself?A: This kit is designed for DIY installation by mechanically inclined owners. Basic hand tools, a torque wrench, and mechanical experience are required. Estimated installation time is 3-5 hours. Professional installation is recommended if you're not comfortable working on diesel engine intake and exhaust systems. Q: Is this kit reversible?A: Yes. The kit is a bolt-on design with no cutting, welding, or permanent modifications. The factory EGR system can be reinstalled if desired. Q: What torque specifications should I use?A: All fasteners should be torqued to OEM specifications. Refer to your vehicle's service manual for exact values. Generally, EGR flange bolts require 18-22 ft-lbs on the 6.7L Cummins platform. Related Products for Your 6.7L Cummins 6.7L EGR Valve Delete Kit (2007-2018)Valve-only variant for earlier models 6.7L EGR Plate Cooler & Throttle Valve DeleteComplete EGR & throttle delete 6.7L DPF Delete Exhaust (2013+)4" Cab & Chassis exhaust 6.7L High-Flow Intake Elbow3.5" intake manifold upgrade Related Blog Posts 6.7L Cummins Common Problems & Solutions – EGR, DPF, and Reliability Guide Diesel Emissions Delete: What Owners Need to Know How to Improve 6.7L Cummins Fuel Economy – 10 Proven Mods

Read more less

1405 600 CFM Performer Carburetor — Manual Choke, 4-Barrel Square Bore The iFJF 1405 Performer carburetor is a precision-engineered 600 CFM 4-barrel square bore carburetor designed as a direct replacement and performance upgrade for the Edelbrock 1405. Ideal for small-block and mild big-block V8 engines from 350 to 450+ cubic inches, this manual choke carburetor delivers crisp throttle response, consistent fuel metering, and trouble-free operation — whether you're cruising on the street, towing, or hitting the track. Key Features 600 CFM Flow Rating: Optimized for street performance and mild race applications on 350-454ci V8 engines. Ideal airflow for dual-plane intake manifolds. Manual Choke: Driver-controlled cold-start enrichment — eliminates the complexity of electric choke wiring and provides positive choke control in all weather conditions. 4-Barrel Square Bore Design: Direct bolt-on for Edelbrock Performer, Performer RPM, and most OEM square bore intake manifolds. No adapter required. Air Valve Secondary: Vacuum-operated secondary air valve opens progressively based on engine demand — no bog, no hesitation, just smooth power delivery. No EGR Provision: Clean, simple design without EGR ports — ideal for off-road, racing, or pre-emissions vehicles. For off-road and racing use only where emissions equipment is not required. Tunable Without Disassembly: Externally adjustable idle mixture screws and easily accessible metering rods and jets enable tuning without removing the carburetor from the manifold. Technical Specifications Specification Value CFM Rating 600 CFM @ 1.5 inHg Barrel Configuration 4-Barrel, Square Bore Choke Type Manual (cable-operated) Secondary Type Vacuum-Controlled Air Valve Fuel Inlet Single 5/8"-20 UNF Throttle Bore Diameter Primary 1-7/16", Secondary 1-11/16" Mounting Flange Square Bore (5-1/8" x 5-5/8") Finish Satin Silver / Natural Aluminum Recommended Fuel Pressure 5.5 psi maximum (regulator recommended) Compatibility Guide Engine Family Displacement Application Notes Small Block Chevy 305-400 ci Excellent match for mild 350 builds with dual-plane intake Small Block Ford 289-351 ci Ideal for 302/351W street performance Big Block Chevy 396-454 ci Suitable for mild street BBC — may be slightly small for high-RPM 454+ AMC V8 304-401 ci Popular upgrade for AMC 360/401 Chrysler LA/Magnum 318-360 ci Requires square bore intake or adapter Why Choose the 1405 Manual Choke Carburetor? The manual choke design offers several advantages over automatic chokes for performance applications. You get positive, immediate choke control without waiting for an electric element to heat up — essential for engines with aggressive camshafts that need precise cold-start enrichment. The manual cable setup also eliminates a potential failure point (burned-out electric choke) and reduces electrical load on your charging system. For race cars, off-road vehicles, and hot rods where simplicity is key, the manual choke 1405 is the go-to choice. Tuning Guide Idle Mixture: Start with both idle mixture screws 1.5 turns out. Warm engine fully. Adjust each screw for highest vacuum reading, then back out 1/8 turn for best idle quality. Idle Speed: Set curb idle to 700-800 RPM (manual trans) or 650-750 RPM (auto in drive). Verify timing is set correctly before adjusting carb. Metering Rods & Jets: Factory calibration works well for most 350-400ci street engines. For altitude (>5,000 ft), step down one jet size. For high-compression builds, step up one rod size richer. Secondary Air Valve: Adjust pre-load spring tension via the set screw on the passenger side. Lighter tension = earlier secondary opening. Too light = bog. Too heavy = sluggish top end. Float Level: Fuel level should be 7/16" from the top of the float bowl with the engine idling. Adjust via the external needle & seat assembly — no bowl removal needed. Fuel Pressure: Edelbrock-style carbs are sensitive to fuel pressure. Use a regulator set to 5.5 psi maximum. Higher pressure will force the needle off the seat and flood the engine. Frequently Asked Questions Q: What's the difference between the 1405 and 1406 carburetors?A: The 1405 uses a manual choke (cable-operated), while the 1406 uses an electric choke (automatic, 12V). The 1405 is preferred for race cars, off-road vehicles, and applications where the driver wants full choke control. The 1406 is better for daily drivers and street cars where automatic cold-start convenience is desired. Q: Do I need a square bore to spread bore adapter?A: If your intake manifold is a spread bore design (Q-jet pattern), yes. If it's a square bore (Holley/Edelbrock pattern), no. Most aftermarket dual-plane intakes (Edelbrock Performer, Weiand Action Plus, etc.) are square bore and accept this carburetor directly. Q: Will this carburetor work with my stock hood?A: The 1405/1406 has a relatively low profile compared to Holley double pumpers and Dominator carbs. In most applications with a stock or mild drop-base air cleaner, hood clearance is not an issue. Measure from the intake manifold carb pad to the hood for verification. Q: What fuel pump do I need?A: A standard mechanical fuel pump (5-7 psi) with a regulator set to 5.5 psi maximum is ideal. Electric pumps must also be regulated. Do NOT exceed 6.0 psi — these carbs are highly sensitive to over-pressurization. Q: Is this carburetor emissions-legal for street use?A: This carburetor does not have EGR provisions and is intended for off-road, racing, and pre-emissions (pre-1975) vehicles. Check your local emissions regulations before installing on a street-driven vehicle. Related Products iFJF 1406 600 CFM Performer Carburetor — Electric Choke — Same carb with automatic electric choke 18-7665 Marine Electric Choke for Mercruiser — Choke assembly for marine applications Related Blog Posts Complete Guide: How to Rebuild Edelbrock 1406 and 1405 Carburetors (Step by Step) How To Rebuild Edelbrock 1406 and 1405 Carburetors | Rebuild Kit Links 1965-1967 Mustang 200ci Inline-6 Carburetor Replacement Guide

Read more less

7.3L Powerstroke Coolant Filtration System & Filter Kit Protect your 1999-2003 Ford 7.3L Powerstroke diesel engine from the #1 silent killer: casting sand and debris in the cooling system. International/Ford 7.3L engine blocks are notorious for residual casting sand left from the manufacturing process. This sand circulates through your cooling system, eroding water pump impellers, clogging oil coolers, and causing premature engine wear. Our complete coolant filtration system captures these contaminants before they cause damage — dramatically extending the life of your water pump, oil cooler, and entire cooling system. Key Features CNC-Machined 6061 Aluminum Filter Block: Precision-machined billet aluminum construction with anodized finish — far more durable than plastic alternatives. High-Capacity Spin-On Filter: Captures contaminants down to 10 microns including casting sand, rust particles, and metal shavings. Complete Kit: Includes filter assembly, mounting bracket, 2 ball valves, silicone coolant hoses, all hose clamps, and hardware. Extends Engine Life: Clean coolant means your water pump, oil cooler, radiator, and heater core all last significantly longer. Serviceable Design: Ball valves allow filter changes without draining the entire cooling system. Compatibility Year Make Model Engine 1999-2003 Ford F-250 Super Duty 7.3L Powerstroke V8 Diesel 1999-2003 Ford F-350 Super Duty 7.3L Powerstroke V8 Diesel 1999-2003 Ford F-450 Super Duty 7.3L Powerstroke V8 Diesel 1999-2003 Ford F-550 Super Duty 7.3L Powerstroke V8 Diesel 2000-2003 Ford Excursion 7.3L Powerstroke V8 Diesel Specifications Specification Detail Filter Block Material CNC-Machined 6061-T6 Aluminum, Anodized Blue Hose Material Reinforced Silicone — High Temperature Rated Filtration Rating 10 Micron Nominal Valves 2x Ball Valves (Brass) — Isolate Filter for Service Filter Change Interval 1st: 500 miles | 2nd & 3rd: 3,000 miles each | Then: Annually Why Choose iFJF? Proven Protection: Thousands of 7.3L owners have installed coolant filtration to solve the casting sand problem. Racing-Grade Components: Silicone hoses and billet aluminum — not cheap rubber and plastic. Includes Everything: Every bracket, clamp, bolt, and hose you need — no hardware store trips. Frequently Asked Questions Q: Why does my 7.3L need a coolant filter?A: 7.3L engine blocks contain residual casting sand from manufacturing. This sand constantly circulates, eroding your water pump impeller and clogging the oil cooler. A coolant filter captures these particles before they cause expensive damage. Q: Will this fit my 2001 Ford Excursion 7.3L?A: Yes. This kit fits all 1999-2003 Ford 7.3L Powerstroke applications including F-250, F-350, F-450, F-550, and 2000-2003 Excursion. Q: How often should I change the coolant filter?A: Replace the first filter at 500 miles (initial cleanup), second and third at 3,000 miles each. After three changes, switch to annual replacement. Q: Does installation require draining the coolant?A: Some coolant loss is expected (~1-2 gallons). Ball valves make future filter changes easy without draining the system. Q: Can I install this myself?A: Moderate difficulty — approximately 2-3 hours. The kit mounts to the frame rail or firewall. Professional installation recommended. Related Products 7.3L Powerstroke Fuel Pressure Regulator Blue Spring Kit

Read more less

Product Overview Keep your 6.7L Cummins turbo diesel running at peak performance with the iFJF FF266 Fuel Filter. Engineered as a direct replacement for Cummins part number 5335504 and Fleetguard 800154401, this high-efficiency fuel filter delivers 4-micron absolute filtration — protecting your high-pressure common rail (HPCR) injection system from water, debris, and contaminants that can destroy injectors. The 6.7L Cummins fuel system operates at pressures exceeding 30,000 PSI. Any contamination can cause catastrophic injector failure. This FF266 filter meets or exceeds OEM specifications for filtration efficiency, water separation, and dirt-holding capacity — at a fraction of dealer pricing. Key Features 4-Micron Absolute Filtration — Removes 99.9% of particles ≥4 microns, protecting HPCR injectors Advanced Water Separation — Coalescing media strips emulsified water from ULSD/biodiesel blends OEM-Grade Media — Synthetic multi-layer filter media with anti-drainback valve Direct Fit — No modifications required; drops into factory filter housing 10,000-15,000 Mile Service Interval — Matches OEM recommended change schedule Compatibility / Fitment Year Make Model Engine 2007–2024 Dodge / Ram 2500 6.7L Cummins Turbo Diesel 2007–2024 Dodge / Ram 3500 6.7L Cummins Turbo Diesel 2007–2024 Dodge / Ram 4500 6.7L Cummins Turbo Diesel 2007–2024 Dodge / Ram 5500 6.7L Cummins Turbo Diesel Cross-Reference / Replaces Brand Part Number Cummins / Fleetguard 5335504, FF266, 800154401 Mopar 68157291AA WIX WF10105 Baldwin PF46108 Donaldson P553205 Specifications Specification Value Filter Type Spin-on Fuel/Water Separator Filtration Rating 4 Micron Absolute Thread Size M95 x 2.5 Outer Diameter Approx. 4.3 inches Height Approx. 6.9 inches Gasket Nitrile (Buna-N) Anti-Drainback Valve Yes Why Choose iFJF? We source directly from ISO/TS 16949 certified manufacturers — the same supply chain that feeds major OEM and aftermarket brands. Every filter undergoes multi-point quality inspection including media integrity testing, thread gauge verification, and burst pressure testing. You get OEM reliability without the dealership markup. Installation Tips Relieve fuel system pressure before removal Clean filter housing mounting surface thoroughly Fill new filter with clean diesel fuel before installation (reduces cranking time) Lubricate gasket with clean diesel fuel — never use grease Hand-tighten, then 3/4 turn with filter wrench Prime fuel system by cycling key ON (not START) 3-4 times for 30 seconds each Frequently Asked Questions Q: How often should I change this fuel filter?A: Cummins recommends every 15,000 miles or 12 months under normal conditions. If you tow heavy, idle frequently, or use biodiesel blends, change every 10,000 miles. Q: Will this fit my 2018 Ram 2500 with the 6.7L Cummins?A: Yes. This filter fits all 2007-2024 Ram 2500/3500/4500/5500 models with the 6.7L Cummins turbo diesel engine. Q: Does this filter come with the water-in-fuel (WIF) sensor?A: No. This is the filter element only. The WIF sensor is part of the filter housing and can be reused — simply unscrew it from the old filter and thread it into the new one. Q: What's the difference between FF266 and other fuel filters?A: The FF266 is a 4-micron absolute fuel/water separator specifically designed for the high-pressure common rail injection system on 6.7L Cummins engines. Standard filters may only achieve 10-20 micron filtration — insufficient for HPCR protection. Q: Can I use this on a deleted truck?A: Yes, this is a maintenance fuel filter — it has nothing to do with emissions equipment. Suitable for all 6.7L Cummins applications including off-road/competition use. Q: Does this filter work with biodiesel (B5/B20)?A: Yes. Our synthetic media is compatible with ULSD and biodiesel blends up to B20. For higher bio blends, consider more frequent change intervals. Related Products You May Also Need FS19727 Fleetguard Fuel/Water Separator — Complete filter kit View All Diesel Fuel Filters — Full range for Duramax, Power Stroke & Cummins Related Blog Posts Diesel Maintenance Tips & How-To Guides Related Guide Read: 245R Diesel Fuel Water Separator Replacement: R25T WK940/38X Swap in Under an Hour

Read more less