Search results for "Multiport Valves"
iFJF 11029 Diesel Install Kit w Brass Rollover Valve Chevy GMC 1999-2010
Product Overview The iFJF 11029 Diesel Install Kit is a complete fuel system connection package designed for Chevy and GMC diesel trucks (1999–2010). This all-in-one kit provides everything you need to connect an auxiliary fuel tank or transfer system to your factory fuel tank via a gravity-feed setup. Featuring a high-quality brass rollover valve for safety, a brass stop valve for fuel flow control, a durable rubber fuel hose, and all necessary clamps and sealing tape, the 11029 kit delivers reliable, leak-free performance. Whether you are setting up a bed-mounted transfer tank for extended range or replacing worn factory fuel system components, this kit has you covered. Vehicle Compatibility Make Model Year Range Engine Notes Chevrolet Silverado 2500HD / 3500HD 1999–2010 6.6L Duramax Diesel GMC Sierra 2500HD / 3500HD 1999–2010 6.6L Duramax Diesel Chevrolet / GMC 1500HD / 2500 / 3500 1999–2010 Diesel engine variants Compatibility Note: Designed for use with 3/8-inch internal thread drain pipe connectors. Always verify your specific model year and fuel system configuration before ordering. Technical Specifications Specification Details Part Number 11029 / FJ-DIK-11029 Rollover Valve Material Brass Stop Valve Material Brass Fuel Hose Material Rubber (diesel-rated) Fitting Size 3/8 inch internal thread Kit Contents Brass rollover valve, brass stop valve, fuel hose, 4 small clamps, 4 large clamps, adhesive tape Installation Type Gravity feed (controlled fuel level) Package Weight Approx. 1.8 lbs Key Features Brass Rollover Safety Valve: The included brass rollover valve automatically shuts off fuel flow in the event of a vehicle rollover, providing critical safety protection that meets industry standards for auxiliary fuel system installations. Brass Stop Valve with Manual Control: A durable brass shut-off valve lets you manually control fuel flow between tanks — open to allow gravity-fed transfer, close to prevent overflow or when the auxiliary tank is empty. Complete Connection Kit: Everything you need in one package: 1 brass rollover valve, 1 brass stop valve, 1 diesel-rated fuel hose, 4 small hose clamps, 4 large hose clamps, and 1 roll of adhesive sealing tape. Stable Gravity Fuel Supply: The gravity-feed design provides consistent, reliable fuel transfer from your auxiliary tank to the main tank without the need for electric pumps or complex wiring. Aluminum Alloy Construction: Key connection components are made from corrosion-resistant aluminum alloy for long-term durability in under-chassis environments exposed to road salt, moisture, and temperature extremes. Chevy/GMC Diesel Optimized: Specifically designed for 1999–2010 Chevy and GMC diesel trucks with 3/8-inch drain pipe connections — no guesswork on fitment. Why Choose iFJF At iFJF, we understand that diesel truck owners demand reliability. The 11029 Diesel Install Kit is built around genuine brass valves — not plastic or zinc alloy substitutes — for superior durability and chemical resistance. Every kit is manufactured to tight tolerances and inspected before shipping. We stand behind our products with responsive customer support, so you can install with confidence. iFJF: OE-quality components at aftermarket prices. Important Safety Notice ⚠️ Important: Always close the stop valve when the auxiliary tank is not in use to prevent fuel overflow from the main tank. This product is designed for diesel fuel systems only. Installation should be performed by a qualified mechanic familiar with diesel fuel system safety protocols. No installation instructions are included in the package — professional installation is strongly recommended. Frequently Asked Questions Q: Do I need any additional parts to complete the installation? A: This kit includes all major components — valves, hose, clamps, and sealing tape. Depending on your specific truck configuration, you may need additional hose length, adapters, or mounting brackets. Professional installers typically have these supplementary items on hand. Q: Are installation instructions included? A: This kit does not include printed installation instructions. Due to variations in truck configurations and auxiliary tank setups, we recommend having a qualified diesel mechanic perform the installation. General gravity-feed installation guides are widely available online. Q: Can I use this kit with a gasoline engine? A: This kit is designed and rated for diesel fuel systems. The hose and sealing materials are optimized for diesel fuel compatibility. We do not recommend use with gasoline, as material degradation and safety risks may occur. Q: How do I know when to close the stop valve? A: Close the stop valve whenever the auxiliary tank is empty or when you do not need fuel transfer. This prevents potential backflow or overflow from the main tank. Monitor your fuel gauge during gravity-feed operation and close the valve once the desired fuel level is reached. Explore More iFJF Products Need more diesel fuel system components? Browse our complete iFJF diesel accessories collection, including the 11025 Auxiliary Fuel Tank Mounting Kit for Ford F-250/F-350 Super Duty trucks, replacement brass valves, and heavy-duty fuel hoses. For Chevy/GMC owners, check out our full range of GM truck parts and accessories. 🔗 Duramax Diesel Resources 📖 Maintenance Guides: Duramax Fuel Filter Housing: Complete Compatibility Guide (2001–2024) 2001–2016 Duramax Fuel Filter Replacement: Complete DIY Guide Top 5 Diesel Fuel Filter Housing Problems (And How to Fix Them) Duramax 6.6L Oil Change: Complete DIY Guide (Every Generation) 🔍 Shop All Duramax 6.6L Parts → | Browse All Fuel Filters →
$67.99
iFJF Passenger Up-Pipe & EGR Valve Delete Kit for 2007.5-2010 Duramax 6.6L LMM — Silverado/Sierra 2500HD 3500HD
Product Overview Upgrade your 2007.5-2010 Chevrolet Silverado 2500HD/3500HD or GMC Sierra 2500HD/3500HD with the iFJF Passenger Up-Pipe & EGR Valve Delete Kit. This comprehensive kit eliminates the restrictive factory EGR (Exhaust Gas Recirculation) system and replaces the failure-prone passenger-side up-pipe with a heavy-duty mandrel-bent replacement. Designed specifically for the 6.6L Duramax LMM turbo diesel engine, this kit reduces exhaust gas temperatures (EGTs), improves turbocharger response, and prevents soot/carbon buildup in the intake system. ⚠️ OFF-ROAD / COMPETITION USE ONLY: This product is intended for off-road, racing, and competition vehicles only. Not for use on public roads or highways. Check local, state, and federal regulations before installation. Key Features Complete EGR System Elimination: Includes EGR valve delete plate and all required block-off hardware to fully remove the EGR system from your LMM Duramax. Heavy-Duty Passenger Up-Pipe: Mandrel-bent T304 stainless steel construction replaces the restrictive, crack-prone OEM up-pipe for improved exhaust flow. CNC-Machined Block-Off Plates: Precision-cut 6061-T6 aluminum plates with recessed O-ring grooves ensure a leak-free seal at all EGR mounting points. Lower EGTs & Better Spool: By eliminating exhaust gas recirculation, turbo spools faster and exhaust temperatures drop 100-200°F under load. Prevents Carbon Buildup: Removes the source of soot and carbon deposits that clog the intake manifold, swirl valves, and EGR cooler on LMM engines. Direct Bolt-On Installation: All necessary gaskets, bolts, and hardware included — no welding or fabrication required. Compatibility Year Make Model Engine 2007.5-2010 Chevrolet Silverado 2500HD / 3500HD 6.6L Duramax LMM 2007.5-2010 GMC Sierra 2500HD / 3500HD 6.6L Duramax LMM Specifications Specification Detail Material T304 Stainless Steel (Up-Pipe) / 6061-T6 Aluminum (Plates) Pipe Diameter 2.0 inches (mandrel-bent) Finish Natural stainless / CNC machined Fitment 2007.5-2010 Duramax LMM ( Passenger Side ) Includes Up-pipe, EGR delete plates, gaskets, bolts, O-rings, hardware kit Installation Bolt-on (professional installation recommended) Why Choose iFJF iFJF Direct specializes in high-performance diesel aftermarket components engineered for the North American truck enthusiast. Our LMM Duramax delete kits are manufactured to strict tolerances using premium materials — from T304 stainless up-pipes that resist thermal fatigue to CNC-machined aluminum plates that seal perfectly against factory mounting surfaces. Every kit includes all necessary hardware and gaskets for a frustration-free installation. Frequently Asked Questions Q: Will this fit my 2007.5 Duramax LMM?A: Yes. This kit is specifically designed for 2007.5-2010 Chevrolet Silverado and GMC Sierra 2500HD/3500HD models equipped with the 6.6L Duramax LMM turbo diesel engine. The 2007.5 model year (new body style) is fully compatible. Q: What's included in the kit?A: The kit includes the passenger-side heavy-duty up-pipe, EGR valve delete plate, block-off plates, all required gaskets, O-rings, Grade 8 bolts, and detailed installation hardware. Q: Will this lower my EGTs?A: Yes. By eliminating EGR gas recirculation, exhaust gas temperatures typically drop 100-200°F under load. Combined with a tune, EGT reduction can be even more significant. Q: Does this require a tuner or ECM reprogramming?A: Yes. Removing the EGR system will trigger a Check Engine Light (CEL) without proper ECM tuning. A compatible tuner or custom tune is required to disable EGR-related DTCs. Q: What tools are needed for installation?A: Basic hand tools including 10mm, 13mm, 15mm sockets/wrenches, torque wrench, and penetrating oil for rusted factory bolts. Professional installation is recommended — typical install time is 2-4 hours. Q: Is this product street legal?A: No. This product is for OFF-ROAD / COMPETITION USE ONLY. It is not CARB-compliant and not legal for sale or use in California or other states with similar emissions regulations. Check your local laws before purchase. Q: Does this kit replace both up-pipes?A: This kit includes the passenger-side up-pipe only. The driver-side up-pipe can remain stock or be upgraded separately. Q: What's the difference between LMM and LBZ EGR kits?A: The LMM (2007.5-2010) uses a different EGR system layout compared to the LBZ (2006-2007). This kit is specifically engineered for LMM fitment — do not attempt to install on LBZ or LLY engines. ⚠️ Off-Road / Competition Use Only: This product is intended for off-road or competition vehicles only. Not legal for highway use on emissions-controlled vehicles in the US and many other jurisdictions. Check local and federal regulations before purchasing. Removal of emissions equipment may void your vehicle warranty. 🔗 Duramax Diesel Resources & Maintenance 📖 Related Guides: L5P Duramax Fuel Filter Housing Cap Replacement — Complete DIY Guide Duramax Fuel Filter Housing: Compatibility Guide (2001–2024) Duramax 6.6L Oil Change: Complete DIY Guide (Every Generation) 🔍 Shop All Duramax 6.6L Parts → | EGR Delete Parts → | Exhaust System →
$191.18
iFJF 36 Sq.ft Pool Filter Grille Assembly 59023500 | Replaces DEX3620DC DEX3600DA | iFJF
Product Overview 36 Sq.ft Pool Filter Grille Assembly 59023500 | Replaces DEX3620DC DEX3600DA | is a premium-quality replacement component engineered for exact fitment and reliable performance. Manufactured to meet or exceed OEM specifications using high-grade materials, this part delivers dependable service life for your equipment. Key Features Precision Fit: Engineered to exact OEM dimensions for leak-free, drop-in installation. Chemical Resistant: Made from high-grade materials that resist chlorine, bromine, and ozone degradation. Direct Replacement: No modifications required — simply remove the old part and install this one. Durable Construction: Premium materials prevent cracking, warping, and compression set over time. Cost-Effective: Get OEM-equivalent quality at a fraction of dealer pricing. Specifications Specification Detail Brand iFJF Product Type Pool Filter Condition New Replaces Part # 59023500 Warranty 12 Months Why Choose iFJF Direct iFJF Direct specializes in premium replacement parts for diesel trucks, RVs, marine, pool & spa, and automotive applications. Every product is backed by our commitment to quality, fast US-based shipping, and responsive customer support. We source directly from IATF 16949-certified manufacturers to bring you OEM-equivalent quality at competitive prices. Frequently Asked Questions Q: Will this fit my pool/spa model?A: Please verify your multiport valve model number against the specifications listed. This part is designed for HiFlow-compatible valves. Contact us with your valve model if you need help confirming fitment. Q: What material is this made from?A: This component is manufactured from high-grade, chemical-resistant materials engineered to withstand constant exposure to chlorine, bromine, and ozone in pool and spa environments. Q: How do I install this part?A: Installation is straightforward — remove the old component and replace with this direct-fit part. We recommend using silicone-based lubricant on gaskets and O-rings during installation for optimal sealing. Q: How long will this last?A: With proper maintenance and balanced water chemistry, these components typically provide 3-5 years of reliable service. Inspect annually for signs of wear. Q: Is this an OEM part?A: This is a premium aftermarket replacement manufactured to match OEM specifications. It provides equivalent performance at a more affordable price point.
$383.00
iFJF iFJF 2010-2014 6.7L Cummins Dodge Ram EGR Throttle Valve Cooler Delete Kit
Product Overview Eliminate the restrictive and failure-prone EGR system on your 2010-2014 Ram 2500/3500 6.7L Cummins with this EGR Throttle Valve & Cooler Delete Kit from iFJF. The factory EGR system recirculates hot, soot-laden exhaust gas back into your engine's intake — causing carbon buildup, oil contamination, reduced performance, and elevated EGTs. This complete hardware kit replaces the EGR components with precision-machined billet aluminum delete plates and pipes, restoring clean airflow and reliability to your Cummins engine. Why Delete the EGR on Your 6.7L Cummins? The 6.7L Cummins is one of the most durable diesel platforms ever built — but the emissions systems hold it back. The EGR cooler is a known failure point that can leak coolant into the intake, and the EGR valve introduces abrasive soot particles into the combustion chamber. For off-road and competition applications, removing these components dramatically improves engine health and performance. Key Features Complete EGR System Delete — Throttle valve delete plate + EGR cooler delete components in one kit CNC-Machined Billet 6061-T6 Aluminum — Precision-engineered for perfect fit and long-term durability Eliminates Carbon Buildup — No more exhaust soot fouling your intake manifold, valves, and engine oil Reduced EGTs — Cooler exhaust gas temperatures for safer, more reliable operation under load Improved Turbo Response — Clean, unrestricted intake airflow for faster turbo spool Prevents EGR Cooler Failure — Eliminate the risk of internal coolant leaks causing hydrolock or head gasket damage Includes All Hardware — Gaskets, O-rings, bolts, and mounting hardware included Compatibility Year Make Model Engine 2010 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2011 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2012 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2013 Ram 2500 / 3500 6.7L Cummins Turbo Diesel 2014 Ram 2500 / 3500 6.7L Cummins Turbo Diesel Technical Specifications Specification Detail Material CNC-Machined Billet 6061-T6 Aluminum Finish Corrosion-Resistant Coating Application Off-Road / Competition Use Only Installation Professional Installation Recommended Tuning Required Yes — Custom ECU Tune Required to Disable EGR DTCs ⚠️ Important Legal Notice OFF-ROAD / COMPETITION USE ONLY. This EGR delete kit is intended exclusively for off-road and closed-course competition vehicles. It is NOT street-legal and does NOT comply with EPA or CARB emissions regulations. The purchaser assumes all responsibility for compliance with applicable laws. Frequently Asked Questions Q: What does this EGR delete kit include?A: This kit includes the EGR throttle valve delete plate, EGR cooler delete components, all necessary gaskets, O-rings, bolts, and mounting hardware for a complete installation. Q: Will this trigger a check engine light?A: Yes. The ECU will detect the missing EGR components and set diagnostic trouble codes. Custom ECU tuning is required to disable EGR-related DTCs and prevent limp mode. This kit is hardware only. Q: Is this legal for street use?A: OFF-ROAD / COMPETITION USE ONLY. EGR delete modifications are not EPA or CARB compliant and are not legal for on-road vehicles. Q: What are the benefits of EGR delete on a 6.7L Cummins?A: On off-road/competition vehicles, deleting the EGR system eliminates carbon buildup in the intake manifold, reduces soot contamination in engine oil, lowers EGTs, improves turbo response, and removes the risk of EGR cooler failure. Q: Do I need to remove the DPF as well?A: The EGR and DPF systems work together. For optimal results on competition vehicles, removing both systems with proper ECU tuning is recommended. However, this kit addresses the EGR system specifically. Q: What material is used?A: All delete components are CNC-machined from billet 6061-T6 aluminum with a corrosion-resistant finish, engineered to withstand the high-temperature environment of the 6.7L Cummins engine bay. Q: Does this fit my 2010-2014 Ram 2500/3500?A: Yes. This kit is designed for all 2010, 2011, 2012, 2013, and 2014 Ram 2500 and 3500 trucks equipped with the 6.7L Cummins turbo diesel engine. Why Choose iFJF? iFJF is your trusted source for diesel performance aftermarket parts. All our products are precision-engineered using premium materials and backed by responsive US-based customer support. From Cummins to Powerstroke to Duramax, we deliver the parts that keep your diesel running at its best. You May Also Need EGR Throttle Valve & Cooler Delete Kit — 2010-2014 Ram 6.7L EGR Valve Delete Kit for 2007-2018 Ram 6.7L Cummins 3.5" High Flow Intake Manifold Elbow for 2007-2018 Ram 6.7L
$89.99
iFJF 53013360AA Vent Valve Elbow & Grommet Kit for Jeep Grand Cherokee 4.0L
Product Overview Restore proper crankcase ventilation in your Jeep Grand Cherokee with the iFJF 53013360AA Vent Valve Elbow and Grommet Kit. This direct-fit replacement kit is engineered for 2000-2004 Jeep Grand Cherokee models equipped with the legendary 4.0L inline-six engine, providing the exact fit and function of the original Mopar part at a more affordable price. The PCV (Positive Crankcase Ventilation) system is essential for engine health — it removes harmful blow-by gases from the crankcase, prevents oil sludge buildup, and reduces emissions. A cracked or clogged vent valve elbow can cause vacuum leaks, rough idle, oil consumption, and even Check Engine Light codes. This complete kit includes both the elbow and mounting grommet for a comprehensive repair. Key Features Complete Kit: Includes vent valve elbow AND mounting grommet — everything needed for one repair Exact Fit: Precision-molded to match the original 53013360AA specifications for 2000-2004 Grand Cherokee 4.0L Heat-Resistant Material: Engineered rubber compound withstands engine bay temperatures without cracking or hardening Restores Performance: Eliminates vacuum leaks, improves idle quality, and prevents oil consumption issues Multiple Cross-References: Replaces 53013360AA, 53030497, 42344, and 47079 📋 Compatibility Compatible Vehicles Jeep Grand Cherokee 4.0L L6 (2000-2004) Any vehicle using Mopar 53013360AA PCV system 📐 Specifications Specification Value Mopar Part Number 53013360AA Cross References 53030497, 42344, 47079 Material Heat-resistant rubber (elbow), Rubber (grommet) Fits Engine 4.0L Power Tech Inline-6 Installation Location Valve cover — rear PCV port Installation Guide Allow engine to cool completely Remove old elbow and grommet from valve cover Clean the mounting surface thoroughly Insert new grommet into valve cover opening Press new elbow firmly into grommet until seated Reconnect vacuum hose to elbow Start engine and check for proper operation Why Choose iFJF? iFJF provides high-quality replacement parts backed by extensive product knowledge. This 53013360AA vent valve kit is manufactured to the same specifications as the Mopar original, ensuring reliable performance and easy installation. We ship fast from US warehouses so you can get your Jeep back on the road quickly. ❓ Frequently Asked Questions Q: Will this fit my 2002 Jeep Grand Cherokee Laredo 4.0L?A: Yes. This kit fits all 2000-2004 Jeep Grand Cherokee models with the 4.0L Power Tech inline-6 engine, including Laredo, Limited, and Overland trims. Q: What symptoms indicate a bad PCV vent valve elbow?A: Rough idle, hissing sound from engine bay (vacuum leak), increased oil consumption, oil in the air filter housing, and Check Engine Light with lean codes (P0171, P0174) are all common symptoms. Q: Does the kit include both the elbow and grommet?A: Yes. This is a complete kit that includes both the vent valve elbow and the rubber grommet it mounts into. You get everything needed for a complete repair. Q: Is this Mopar OEM or aftermarket?A: This is a high-quality aftermarket replacement that matches the OEM 53013360AA specifications. It fits and functions identically to the genuine Mopar part. Q: How long does installation take?A: Installation typically takes 10-20 minutes with basic hand tools. No special tools required.
$23.99
iFJF iFJF 637R Pool Pipe Holder with Air Jet Valve Kit for 1500-4000 GPH Above Ground Pools
Product OverviewThe 637R is a high-quality replacement part designed for 637r pool pipe holder with air jet valve kit for 1500-4000 gph above ground pools. Constructed from durable, chemical-resistant materials, this component is built to withstand the demanding environment of pool and spa filtration systems. Precision-engineered for exact fitment, it ensures leak-free operation and reliable performance season after season.Whether you're performing routine maintenance or repairing a failed component, this replacement part offers OEM-comparable quality at a significant cost savings. Easy to install with basic tools, it gets your pool or spa filtration system back to peak performance quickly.Key Features Durable Construction: Chemical-resistant materials withstand pool and spa environments Exact Fitment: Precision-engineered to match original equipment specifications Leak-Free Operation: Proper sealing surfaces ensure reliable, leak-free performance Easy Installation: Direct replacement part installs with basic tools Cost-Effective: OEM-comparable quality at significant savings vs. dealer pricing Compatibility & FitmentDesigned for above-ground and in-ground swimming pool filtration systems. Please compare your existing part dimensions and configuration with the product images to confirm compatibility with your specific filter model.Technical Specifications Specification Value Part Number 637R Application Pool/Spa Filtration System Material Chemical-Resistant Polymer/ABS Compatibility Above-Ground & In-Ground Pools Installation Direct Replacement, Basic Tools Required Why Choose iFJF Direct? Quality Assurance: Every iFJF product is manufactured to meet or exceed OEM specifications Fast USA Shipping: Orders ship from our US warehouse within 1-2 business days Best Price Guarantee: Premium quality at competitive prices with no dealer markup Expert Support: Our team of automotive and marine specialists is ready to help with fitment questions Hassle-Free Returns: 90-day return policy if the part doesn't fit your application Installation Tips1. Turn off the pump and relieve system pressure. 2. Remove the old component carefully. 3. Clean all sealing surfaces thoroughly. 4. Install the new part, ensuring proper alignment and seal. 5. Restore power and check for leaks before returning to normal operation.Frequently Asked QuestionsQ: Will this fit my specific pool filter model?A: This part is designed for common pool filtration systems. Please compare your existing part's dimensions and configuration with our product images to verify compatibility.Q: Is professional installation required?A: Most DIY-oriented pool owners can install this part with basic tools. If you're unsure, we recommend consulting a pool professional for installation.Q: What material is this part made from?A: The part is constructed from chemical-resistant, UV-stabilized materials designed to withstand pool chemical exposure and outdoor conditions.
$29.99
iFJF Engine Valve Cover for 2011-2020 Cruze Sonic 1.4L — Encore Trax ELR
Product Overview The iFJF Engine Valve Cover is a direct OEM-spec replacement for the 1.4L L4 Ecotec engine found in 2011-2020 Chevrolet Cruze, Sonic, Trax, Buick Encore, Cadillac ELR, and Chevrolet Volt. Manufactured from high-grade reinforced plastic with a pre-installed rubber gasket and integrated PCV valve, this valve cover eliminates oil leaks, reduces crankcase pressure, and restores engine performance — all at a fraction of the dealer cost. Key Features Precision OEM Fit: Engineered to match the exact dimensions and bolt pattern of the original GM 1.4L Ecotec valve cover. No modifications required — bolts directly in place. Pre-Installed Gasket & PCV Valve: Comes with factory-installed rubber gasket and integrated PCV valve, saving time and eliminating the need to source separate components. High-Grade Reinforced Plastic: Constructed from heat-resistant, oil-resistant reinforced polymer that withstands the high under-hood temperatures of turbocharged 1.4L engines. Leak-Free Design: Precision-molded sealing surface ensures a consistent, reliable seal around the entire perimeter — no more oil pooling in spark plug wells or seeping onto the exhaust manifold. Complete Replacement Kit: Includes valve cover with integrated gasket, PCV valve, and oil fill cap — everything you need for a one-and-done installation. Compatibility Table Year Make Model Engine 2011-2019 Chevrolet Cruze 1.4L L4 Turbo (LUJ/LUV) 2012-2020 Chevrolet Sonic 1.4L L4 Turbo (LUJ/LUV) 2013-2020 Chevrolet Trax 1.4L L4 Turbo (LUJ/LUV) 2013-2020 Buick Encore 1.4L L4 Turbo (LUJ/LUV) 2014-2016 Cadillac ELR 1.4L L4 Range Extender 2011-2015 Chevrolet Volt 1.4L L4 Range Extender Specifications Specification Detail Part Number LL-EVC05 OEM Numbers 55573746, 25198874, 25198498, 25198877, 264-968 Material Reinforced Heat-Resistant Polymer Gasket Pre-Installed Molded Rubber PCV Valve Integrated (Built-In) Installation Direct Bolt-On Warranty 12-Month Manufacturer Warranty Why Choose iFJF? GM 1.4L Ecotec engines are notorious for valve cover leaks as they age — particularly around the PCV valve and spark plug tube seals. Dealership replacements can cost $400+ in parts and labor. Our iFJF valve cover delivers OE-quality fit and performance at a fraction of that cost. Every cover is inspected for flatness, gasket seating, and PCV function before shipping. Installation Tips Clean the cylinder head mating surface thoroughly — remove all old gasket material and oil residue. Torque valve cover bolts to 89 in-lbs (10 Nm) in a spiral pattern starting from the center. Do NOT use RTV sealant — the pre-installed rubber gasket is designed to seal dry. Allow the engine to cool completely before starting — hot plastic can warp during installation. Frequently Asked Questions Q: Does this fit my 2014 Chevy Cruze 1.4L Turbo?A: Yes. This valve cover is a direct fit for all 2011-2019 Chevy Cruze models with the 1.4L L4 Turbo engine (LUJ/LUV). It includes the integrated PCV valve and pre-installed gasket. Q: Is the PCV valve built into this valve cover?A: Yes. The PCV valve is integrated into the valve cover — it cannot be replaced separately on the 1.4L Ecotec engine. A failed PCV valve is one of the most common reasons for replacing this part. Q: What are the signs of a failing valve cover?A: Common symptoms: oil leaks along cover edges, oil in spark plug wells causing misfires, whistling/squealing from PCV valve, rough idle, and check engine codes P0171 or P1101. Q: How does this compare to the OEM GM valve cover?A: This aftermarket cover meets the same specs as the GM original (55573746) — same reinforced polymer, bolt pattern, and port locations — at 50-60% less than dealer pricing. Q: Does this include the oil fill cap?A: Yes. This kit includes the valve cover assembly with pre-installed gasket, integrated PCV valve, and oil fill cap. Q: How long does installation take?A: Approximately 45-90 minutes for a DIY mechanic. You will need a 10mm socket, torque wrench, and flathead screwdriver. No special tools required. Q: Will this fix my P0171 or P1101 code?A: If the code is caused by a leaking valve cover or failed PCV valve (common on 1.4L Ecotec), then yes. We recommend scanning for other causes before replacing.
$89.99
iFJF iFJF 34100 Toilet Water Valve Kit Replacement for Aqua Magic Style Lite & Plus
RV Toilet Water Valve Kit — Style Lite & Plus The 34100 Toilet Water Valve Kit Replacement for Aqua Magic Style Lite & Plus is a complete water valve replacement kit engineered for Thetford Aqua Magic RV toilets. This kit restores proper flushing operation, eliminates water leaks, and prevents backflow contamination in your RV's freshwater system. Key Features Complete Replacement Kit — Includes water valve assembly, vacuum breaker, gaskets, and mounting hardware for a one-time repair Leak-Free Design — Precision-molded valve body and high-quality seals prevent water waste and water damage to your RV floor Vacuum Breaker Integrated — Built-in backflow prevention protects your RV's freshwater supply from contamination Direct OEM Replacement — Matches original Thetford specifications for guaranteed fitment and performance Easy DIY Installation — Complete kit with all components needed; basic hand tools are all that's required Compatible Thetford Models Series Models Aqua Magic Style Lite All models — High and Low Profile Aqua Magic Style Plus All models — High and Low Profile Aqua Magic Residence All models Technical Specifications Specification Detail Part Number 34100 Valve Type Water Inlet Valve with Vacuum Breaker Connection Type 1/2-inch PEX / Barb Fitting Material High-Impact Plastic & EPDM Seals Application RV / Camper / Motorhome Toilet Signs You Need a Replacement Water continuously running into the toilet bowl Weak or inconsistent flush pressure Water leaking around the valve area onto the floor Toilet not holding water in the bowl after flushing Visible cracks or mineral deposits on the valve body Why Choose iFJF Complete Kit — Everything you need in one package; no trips to the hardware store OEM Quality — Manufactured to meet or exceed original Thetford specifications Fast Shipping — Ships from US warehouse with quick delivery DIY Friendly — Installation takes 15-30 minutes with basic tools Frequently Asked Questions Q: Does this kit include the vacuum breaker?A: Yes. The kit includes the water valve assembly with integrated vacuum breaker, plus all necessary gaskets and seals. Q: Will this fit my low-profile Aqua Magic?A: Yes. This water valve kit is compatible with both high-profile and low-profile Aqua Magic Style Lite and Style Plus toilets. Q: What tools do I need for installation?A: Basic hand tools — adjustable wrench, screwdriver, and possibly pliers. Shut off your RV's water pump and depressurize the system before starting. Q: How long does installation take?A: Most DIYers complete the installation in 15-30 minutes. The kit includes clear instructions.
$28.99
iFJF 1.57" Pressure Gauge 0-30psi for Pool Sand Filter Pump — Stainless Steel
1.57" Dial Pressure Gauge — 0-30psi / 200kPa — 304 Stainless Steel Case — 1/4" NPT Bottom Mount Monitor your pool sand filter performance with a gauge you can trust. The iFJF 1.57" Pressure Gauge is a precision-manufactured direct replacement for most pool, spa, and water filtration pressure gauges. The 304 stainless steel case resists corrosion from pool chemicals and outdoor exposure far better than painted steel alternatives. Features a clear, easy-to-read 0-30psi / 200kPa dual-scale dial, 1/4" NPT bottom-mount connection for standard filter valve fitment, and factory calibration for accurate readings right out of the box. Backed by a full 1-year replacement warranty. Key Features 304 Stainless Steel Case: Superior corrosion resistance vs. painted steel gauges that rust within a season. Withstands pool chemicals, salt systems, and outdoor weather. Dual-Scale Dial: 0-30 psi on the outer scale, 0-200 kPa on the inner scale. Clear, high-contrast markings for quick readings at a glance. Factory Calibrated: Pre-calibrated to ±1.6% accuracy. No zeroing or field calibration required — install and read. Standard 1/4" NPT Connection: Bottom-mount brass fitting threads directly into most sand filter multiport valves, cartridge filter lids, and pump housings. Teflon tape included in the box. 1-Year Replacement Warranty: Covered against manufacturing defects for a full year. If it fails, we replace it — no questions asked. Versatile Application: Works on pool sand filters, DE filters, cartridge filters, well pumps, irrigation systems, and general water pressure monitoring. Compatibility This pressure gauge fits most pool filtration equipment with a standard 1/4" NPT female threaded port, including: Hayward sand filter multiport valves (SP0714, SP0710, SP0410 series) Pentair / PacFab sand and DE filter valves Jandy / Zodiac filter valves and pump lids Waterway, Sta-Rite, and most private-label pool filters Well pump pressure tanks and irrigation manifolds ⚠ Verify: Confirm your existing gauge has a 1/4" NPT threaded connection and mounts from the bottom (not back-mounted). Most pool filter gauges use this standard connection. Specifications Specification Detail Dial Diameter 1.57" (40mm) Pressure Range 0-30 psi / 0-200 kPa Case Material 304 Stainless Steel Connection 1/4" NPT Bottom Mount (Brass) Accuracy ±1.6% Full Scale Warranty 1-Year Replacement When to Replace Your Pressure Gauge Needle doesn't return to zero when the pump is off Moisture or condensation visible inside the gauge face (failed seal) Rust or corrosion on the case or connection threads Readings are inconsistent or jump during operation Gauge face is cloudy, yellowed, or unreadable Pressure seems "normal" even though filter is obviously dirty — stuck needle Installation Turn off the pool pump and relieve system pressure by opening the air relief valve. Unscrew the old pressure gauge by hand or with a wrench on the brass fitting (not the case). Clean the threaded port — remove old Teflon tape and debris. Apply 2-3 wraps of Teflon tape (included) clockwise to the new gauge's threads. Hand-tighten the gauge into the port, then snug with a wrench — do not over-tighten (brass threads can strip). Turn pump on, check for leaks, and verify the gauge reads in the expected range (typically 10-25psi for a clean filter). Why Choose iFJF? Most pool pressure gauges fail within 1-2 seasons due to cheap painted steel cases that rust and plastic lenses that cloud over. iFJF uses 304 stainless steel for the case — the same grade used in marine and food-grade applications — for years of reliable, readable service. Backed by a 1-year warranty and US-based support. Related Products 385316906 Vacuum Breaker Kit (No Sprayer) 385230325 Vacuum Breaker Kit (With Sprayer) 4036ER2004A Washer Bearing & Seal Kit Frequently Asked Questions Q: Is this plug-and-play or does it require calibration?A: The gauge comes factory-calibrated. Installation is straightforward — remove the old gauge, apply Teflon tape, screw in the new gauge, and it's ready to read. No field calibration needed. Q: What does the pressure reading tell me about my filter?A: A clean filter typically reads 10-15psi. As the filter collects debris, pressure rises. When pressure is 8-10psi above the clean reading, it's time to backwash (sand/DE) or clean (cartridge). A pressure gauge that can't rise above a certain point may indicate a clogged impeller or pump issue. Q: Will this fit my Hayward sand filter?A: Most likely yes — Hayward multiport valves (SP0714, SP0710 series) and most other major brands use the standard 1/4" NPT bottom-mount connection. Verify your existing gauge's thread size before ordering. Q: Can I use this for a well pump or irrigation system?A: Yes. This gauge works for any application within the 0-30psi range using a 1/4" NPT female connection. For higher-pressure applications (>30psi), choose a gauge with appropriate range. Q: Will the stainless steel rust in a saltwater pool?A: 304 stainless steel provides good corrosion resistance in saltwater pool environments. For maximum longevity, rinse the gauge exterior with fresh water periodically — salt buildup on any metal surface can eventually cause pitting. Q: What's the warranty period?A: 1-year replacement warranty against manufacturing defects. If your gauge fails within a year of purchase, contact us for a free replacement. 📚 Related Guides & Articles HOW TO REPLACE BROKEN SWIMMING POOL VACUUM HOSE CUFF
$22.99
iFJF iFJF 2010-2014 6.7L Cummins Dodge Ram EGR Throttle Valve Cooler Delete Kit
Product Overview Eliminate the restrictive and failure-prone EGR system on your 2010-2014 Ram 2500/3500 6.7L Cummins with this EGR Throttle Valve & Cooler Delete Kit from iFJF. The factory EGR system recirculates hot, soot-laden exhaust gas back into your engine's intake — causing carbon buildup, oil contamination, reduced performance, and elevated EGTs. This complete hardware kit replaces the EGR components with precision-machined billet aluminum delete plates and pipes, restoring clean airflow and reliability to your Cummins engine. Why Delete the EGR on Your 6.7L Cummins? The 6.7L Cummins is one of the most durable diesel platforms ever built — but the emissions systems hold it back. The EGR cooler is a known failure point that can leak coolant into the intake, and the EGR valve introduces abrasive soot particles into the combustion chamber. For off-road and competition applications, removing these components dramatically improves engine health and performance. Key Features Complete EGR System Delete — Throttle valve delete plate + EGR cooler delete components in one kit CNC-Machined Billet 6061-T6 Aluminum — Precision-engineered for perfect fit and long-term durability Eliminates Carbon Buildup — No more exhaust soot fouling your intake manifold, valves, and engine oil Reduced EGTs — Cooler exhaust gas temperatures for safer, more reliable operation under load Improved Turbo Response — Clean, unrestricted intake airflow for faster turbo spool Prevents EGR Cooler Failure — Eliminate the risk of internal coolant leaks causing hydrolock or head gasket damage Includes All Hardware — Gaskets, O-rings, bolts, and mounting hardware included Compatibility Year Make Model Engine 2010 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2011 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2012 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2013 Ram 2500 / 3500 6.7L Cummins Turbo Diesel 2014 Ram 2500 / 3500 6.7L Cummins Turbo Diesel Technical Specifications Specification Detail Material CNC-Machined Billet 6061-T6 Aluminum Finish Corrosion-Resistant Coating Application Off-Road / Competition Use Only Installation Professional Installation Recommended Tuning Required Yes — Custom ECU Tune Required to Disable EGR DTCs ⚠️ Important Legal Notice OFF-ROAD / COMPETITION USE ONLY. This EGR delete kit is intended exclusively for off-road and closed-course competition vehicles. It is NOT street-legal and does NOT comply with EPA or CARB emissions regulations. The purchaser assumes all responsibility for compliance with applicable laws. Frequently Asked Questions Q: What does this EGR delete kit include?A: This kit includes the EGR throttle valve delete plate, EGR cooler delete components, all necessary gaskets, O-rings, bolts, and mounting hardware for a complete installation. Q: Will this trigger a check engine light?A: Yes. The ECU will detect the missing EGR components and set diagnostic trouble codes. Custom ECU tuning is required to disable EGR-related DTCs and prevent limp mode. This kit is hardware only. Q: Is this legal for street use?A: OFF-ROAD / COMPETITION USE ONLY. EGR delete modifications are not EPA or CARB compliant and are not legal for on-road vehicles. Q: What are the benefits of EGR delete on a 6.7L Cummins?A: On off-road/competition vehicles, deleting the EGR system eliminates carbon buildup in the intake manifold, reduces soot contamination in engine oil, lowers EGTs, improves turbo response, and removes the risk of EGR cooler failure. Q: Do I need to remove the DPF as well?A: The EGR and DPF systems work together. For optimal results on competition vehicles, removing both systems with proper ECU tuning is recommended. However, this kit addresses the EGR system specifically. Q: What material is used?A: All delete components are CNC-machined from billet 6061-T6 aluminum with a corrosion-resistant finish, engineered to withstand the high-temperature environment of the 6.7L Cummins engine bay. Q: Does this fit my 2010-2014 Ram 2500/3500?A: Yes. This kit is designed for all 2010, 2011, 2012, 2013, and 2014 Ram 2500 and 3500 trucks equipped with the 6.7L Cummins turbo diesel engine. Why Choose iFJF? iFJF is your trusted source for diesel performance aftermarket parts. All our products are precision-engineered using premium materials and backed by responsive US-based customer support. From Cummins to Powerstroke to Duramax, we deliver the parts that keep your diesel running at its best. You May Also Need EGR Throttle Valve & Cooler Delete Kit — 2010-2014 Ram 6.7L EGR Valve Delete Kit for 2007-2018 Ram 6.7L Cummins 3.5" High Flow Intake Manifold Elbow for 2007-2018 Ram 6.7L
$99.99
iFJF 6.0L Powerstroke EGR Eliminator Spool for 2003-2010 Ford F250 F350 — With Bolts & O-Rings
Product Overview The iFJF 6.0L Powerstroke EGR Eliminator Spool is a direct replacement for the factory EGR valve on 2003-2010 Ford F250, F350, F450, and F550 Super Duty trucks with the 6.0L Powerstroke diesel engine. The OEM EGR valve is notorious for accumulating carbon deposits that cause it to stick open or closed — resulting in rough idle, poor throttle response, black smoke, and check engine lights. This CNC-machined aluminum spool permanently replaces the valve, providing unrestricted intake airflow with no moving parts to fail. Includes high-temperature Viton O-rings and mounting bolts for a complete installation. Key Features CNC-Machined Aluminum Alloy — Precision-manufactured for an exact fit in the intake manifold EGR valve port. No moving parts means nothing to break, stick, or wear out. Eliminates Carbon Buildup Issues — The factory EGR valve accumulates exhaust soot, eventually sticking and causing driveability problems. This spool removes the valve entirely. Viton O-Rings Included — Premium fluoroelastomer O-rings rated for continuous exposure to diesel engine bay temperatures (up to 400°F). Won't harden, crack, or leak like standard rubber. Complete Hardware Kit — Includes all bolts needed for installation. No searching for fasteners at the hardware store. No Moving Parts — Unlike the complex OEM EGR valve with its electric motor, position sensor, and moving pintle, this spool is a solid piece of aluminum that will never fail. Smoother Idle & Better Response — Without a sticky EGR valve disrupting airflow, idle quality improves and throttle response becomes more immediate and predictable. Compatibility Year Make Model Engine 2003-2007 Ford F-250 Super Duty 6.0L Powerstroke V8 Diesel 2003-2007 Ford F-350 Super Duty 6.0L Powerstroke V8 Diesel 2003-2007 Ford F-450 Super Duty 6.0L Powerstroke V8 Diesel 2003-2007 Ford F-550 Super Duty 6.0L Powerstroke V8 Diesel 2008-2010 Ford F-250/F-350/F-450/F-550 6.0L Powerstroke V8 Diesel Note: 2008-2010 6.0L models are primarily E-Series (Econoline) vans and some chassis cab configurations. Verify your engine before ordering. Specifications Specification Detail Material CNC-Machined Aluminum Alloy O-Ring Material Viton (Fluoroelastomer) Compatible Years 2003-2010 Compatible Engine 6.0L Powerstroke V8 Diesel (Navistar VT365) Installation Time 30-45 Minutes Tuning Required Yes SKU ER-0063 Installation Quick Guide Disconnect both battery negative terminals Remove the engine cover and locate the EGR valve on top of the intake manifold (passenger side) Disconnect the EGR valve electrical connector and vacuum lines Remove the two mounting bolts securing the EGR valve Carefully pull the EGR valve straight up — it may require gentle prying if carbon-seized Clean the EGR port and mounting surface thoroughly Install the new Viton O-rings on the eliminator spool Insert spool into the intake manifold EGR port Torque mounting bolts to OEM specification Reconnect vacuum lines, install block-off plugs as needed Flash custom ECU tune to disable EGR DTCs Frequently Asked Questions Q: Will this fit my 2008 F-350 6.0L?A: Ford stopped putting the 6.0L in F-Series pickups after 2007. However, the 6.0L continued in E-Series vans and some chassis cabs through 2010. If your 2008+ vehicle has the 6.0L (verify by VIN — 8th digit "P"), this spool will fit. Q: What is the difference between this and the EGR valve delete kit ER-0195?A: This is the same type of product — an EGR valve eliminator spool. Different SKUs exist due to separate product listings. Both are CNC-machined aluminum spools that replace the factory EGR valve. Q: Will I get a check engine light?A: Yes. Removing or bypassing the EGR valve will trigger EGR-related DTCs (typically P0401-P0408). Custom ECU tuning is required to disable these codes and prevent the CEL. This is hardware only — tuning is sold separately. Q: Is this legal for on-road use in California?A: No. This product is intended for OFF-ROAD / COMPETITION USE ONLY. EGR system modifications are prohibited on emission-controlled vehicles under both EPA federal regulations and CARB (California Air Resources Board) rules. It is the buyer's responsibility to ensure compliance with all applicable laws.
$29.99
iFJF FRV100 Flow Regulator Valve for Zodiac MX8 MX6 Elite Pool Cleaners
Keep your pool cleaner running at peak efficiency with the FRV100 Flow Regulator Valve for Zodiac MX8 MX6 Elite Pool Cleaners. Designed as a direct replacement for factory parts, this premium component restores proper function to your automatic pool cleaner, ensuring thorough debris collection and consistent pool wall coverage. Key Features & Benefits Direct OEM Replacement: Engineered to match original equipment specifications for guaranteed fit and function Durable Materials: Constructed with corrosion-resistant materials built to withstand continuous exposure to pool chemicals Easy Installation: Tool-free or basic hand tool installation — most replacements complete in under 15 minutes Restores Cleaner Performance: Eliminates sluggish movement, poor wall climbing, and incomplete pool coverage Universal Compatibility: Compatible with multiple cleaner models within the same series for wide application coverage Compatibility & Specifications Specification Details Part Number FJ-JP-X-FRV01 Replaces FRV100 Price $19.99 Brand iFJF Direct Condition New Why Choose iFJF Direct? Quality Assurance: Every product undergoes rigorous inspection before shipping to ensure you receive a flawless component Expert Support: Our US-based support team has deep knowledge of diesel engines, powersports, and pool equipment — we're here to help with fitment questions Fast Free Shipping: Orders ship from our US warehouse within 1 business day with free standard shipping on all domestic orders 90-Day Returns: Not satisfied? Return within 90 days for a full refund. We stand behind every product we sell Ready to get your equipment back in top shape? Order the FRV100 Flow Regulator Valve for Zodiac MX8 MX6 Elite Pool Cleaners today and enjoy fast shipping, expert support, and the quality assurance that thousands of mechanics and DIY enthusiasts trust. Related Products Pool Cleaner Parts — Complete selection of replacement parts for leading pool cleaner brands Pool Filter Parts — Replacement O-rings, knobs, and accessories for Hayward, Pentair, and Zodiac systems 📖 Related Guide: Pool Cleaner Maintenance Guide — Extend the Life of Your Automatic Cleaner Frequently Asked Questions Q: Is this compatible with my pool cleaner model? A: This part is designed to fit the specific pool cleaner models listed in the product title. Please verify your cleaner model number before ordering. If you're unsure about compatibility, send us your cleaner model number and we'll confirm fitment within 24 hours. Q: How difficult is the installation? A: Most users complete the installation in 15-30 minutes with basic tools. No specialized equipment is required. We recommend reviewing your pool cleaner's manual for disassembly instructions. If you encounter any difficulties, our support team can provide additional guidance. Q: What warranty does this product come with? A: All iFJF Direct products are backed by a 90-day satisfaction guarantee. If you're not completely satisfied, return the product for a full refund. We also offer a 90-day warranty against manufacturing defects. Our US-based customer support team is available to assist with any issues. Q: How fast will I receive my order? A: Orders ship from our US warehouse within 1 business day. Standard shipping typically delivers within 3-7 business days to the continental US. Expedited shipping options are available at checkout. You'll receive a tracking number as soon as your order ships. Q: What if this part doesn't fit my vehicle/equipment? A: If the part doesn't fit, we'll make it right. Contact our support team within 90 days for a prepaid return label and full refund. We recommend verifying your vehicle/equipment model, year, and part numbers before ordering to ensure compatibility. Our team is happy to help with fitment questions before you buy.
$29.99