Search results for "intex hoses"
iFJF iFJF Extended Front/Rear Brake Lines for Jeep Wrangler JK 2007-2018 4-6" of Lift
Product Overview When you lift your Jeep Wrangler JK 4-6 inches, factory rubber brake lines become dangerously short — stretching tight at full droop and risking catastrophic failure. The iFJF Extended Stainless Steel Brake Line Kit solves this with DOT-approved, pressure-tested lines that add the necessary length while upgrading to braided stainless steel construction. This complete front and rear set is engineered for off-road durability — the braided exterior resists rock strikes, mud abrasion, and UV degradation that destroys factory rubber lines. Key Features DOT FMVSS-106 Approved & 4,000 PSI Tested — Every line individually pressure-tested to exceed DOT standards. Your braking safety is never compromised. Braided Stainless Steel Exterior — Armor-grade stainless jacket protects against off-road debris, sharp rocks, and mud. Also prevents internal hose expansion for firmer, more consistent pedal feel. Complete Front & Rear Set — Includes both front extended brake lines and the rear center drop line. Full-vehicle coverage for 4-6" lifted JK Wranglers. PTFE (Teflon) Inner Liner — Chemically inert core resists brake fluid breakdown and temperature extremes (-40°F to 400°F). Won't swell or collapse over time. Precision Fitment — Pre-formed end fittings match factory hard line connections. No adapters, no cutting, no flaring — direct bolt-on replacement. Compatibility Make Model Years Lift Range Jeep Wrangler JK 2-Door 2007-2018 4" - 6" Jeep Wrangler JK Unlimited 2007-2018 4" - 6" Specifications Specification Detail Outer Construction Braided stainless steel Inner Core PTFE (Teflon) Pressure Rating 4,000 PSI tested Certification DOT FMVSS-106 Fitment 4-6" suspension lift SKU FJ-TOOL23-03+TOOL23-04 Why Upgrade to Stainless Brake Lines? Factory rubber lines deteriorate from heat cycling, UV, and brake fluid absorption — they swell under pressure (soft pedal) and can be sliced by trail debris. Braided stainless lines eliminate all three failure modes: the steel jacket prevents swelling for a firmer pedal, resists UV/chemical breakdown, and shrugs off rock strikes. For a lifted JK, extended-length stainless lines aren't just an upgrade — they're safety-critical. Frequently Asked Questions Q: Are these front only or front and rear?A: Complete set — 2 front extended brake lines plus 1 rear center drop line. Everything you need for a 4-6" lifted JK Wrangler. Q: Can I install these without a lift kit?A: These are extended-length lines for 4-6" lifts. On a stock-height JK, excess length could contact moving parts. Use our standard-length kit for stock height. Q: Do I need to bleed the brakes after installation?A: Yes — any time you open the hydraulic system, a full brake bleed is required. Use a pressure bleeder for consistent results with DOT 3 or DOT 4 fluid. Q: Are stainless lines street legal?A: Yes — these lines are DOT FMVSS-106 compliant and street legal in all 50 states. Q: What's the difference vs cheaper braided lines?A: The inner core. Cheap lines use rubber inners that still swell. Our PTFE core is chemically inert, stable from -40°F to 400°F, and won't degrade. Related Products Brake Line Anchor Bracket — JK/JL Extended Brake Lines — JK 4-6" Lift Extended Brake Lines — XJ/YJ/TJ Related Blog Posts iFJF Guides — Installation & Maintenance Tips Jeep Wrangler Lift Kit Buyer's Guide
$97.99
iFJF Heavy-Duty Exhaust Up-Pipe for 2008-2010 Ford 6.4L Powerstroke — F250/F350/F450/F550
Product Overview The iFJF Heavy-Duty Exhaust Up-Pipe is the permanent solution to one of the most persistent problems on the 2008-2010 Ford 6.4L Powerstroke: cracked and leaking factory up-pipes. Ford's original equipment up-pipes are made from thin-gauge material with inadequate weld penetration at the bellows and flanges — a design that virtually guarantees failure as the pipes undergo thousands of extreme hot-cold thermal cycles. Our heavy-duty replacement features thicker 16-gauge T304 stainless steel, full-penetration TIG welds, and reinforced bellow sections — built to outlast the truck, not just the warranty period. Key Features Heavy-Duty 16-Gauge T304 Stainless: 25% thicker material than the factory 18-gauge pipes — dramatically improved resistance to thermal fatigue cracking at the bellows and flanges. TIG-Welded with Full Penetration: Every joint is TIG-welded with complete root penetration — unlike the factory's MIG tack welds that are the primary failure initiation point. Mandrel-Bent Tubing: Smooth, wrinkle-free internal surface maintains consistent flow diameter through all bends for maximum exhaust gas velocity to the turbocharger. Reinforced Bellows: Multi-ply stainless bellows with reinforced end connections absorb thermal expansion without work-hardening and cracking over time. Direct Bolt-In Replacement: Designed to match OEM flange locations, bolt patterns, and mounting points exactly — no grinding, prying, or "massaging" required. Restores Lost Performance: Seals the exhaust leaks that cause turbo lag, reduced boost pressure, and the characteristic 6.4L ticking noise under acceleration. Compatibility Year Make Model Engine 2008-2010 Ford F-250 / F-350 / F-450 / F-550 Super Duty 6.4L Powerstroke V8 Turbo Diesel Specifications Specification Detail Material T304 Stainless Steel, 16-Gauge (0.065") Bend Type Mandrel-Bent (Constant Internal Diameter) Welding Process TIG (Tungsten Inert Gas), Full Penetration Bellows Type Multi-Ply Stainless, Reinforced Ends Flange Type Laser-Cut Stainless Steel, 3/8" Thick Finish Natural Stainless / Brushed Fitment 2008-2010 Ford 6.4L Powerstroke Super Duty Why Choose iFJF iFJF Direct's approach to 6.4L up-pipe manufacturing starts with understanding why the OEM pipes fail. It's not a single cause — it's the combination of thin material, inadequate welding, and bellows that work-harden and crack after repeated thermal cycles. Our pipes address all three failure modes: thicker material, full-penetration TIG welds, and multi-ply reinforced bellows. The result is an up-pipe that you install once and forget about — exactly what a heavy-duty truck part should be. Frequently Asked Questions Q: What are the symptoms of a leaking 6.4L up-pipe?A: Key symptoms include: ticking or fluttering exhaust noise under acceleration (especially when cold), black soot residue around the bellows or flange areas, decreased turbo boost pressure, increased turbo lag, and sometimes a raw diesel exhaust smell in the cabin at idle. Q: Does this fit both driver and passenger sides?A: The 6.4L uses different up-pipe configurations for the driver and passenger cylinder banks. Verify fitment position from the product images before ordering, or contact us for confirmation. Q: Can I reuse my old gaskets?A: No. Exhaust gaskets are single-use crush designs. Always install new multi-layer steel (MLS) gaskets when replacing up-pipes to ensure a proper, leak-free seal. Q: How difficult is the installation?A: Up-pipe replacement on the 6.4L is considered a challenging DIY job due to extremely tight clearances around the turbo and exhaust manifolds. Professional installation with the cab lifted is the standard approach — budget 4-6 hours of shop labor. Q: Is this an EGR delete pipe?A: This is a heavy-duty replacement up-pipe. It may or may not include EGR block-off provisions depending on the specific variant. If you are looking for an EGR delete solution, consider our bypass up-pipe + EGR delete combination kits.
$178.00
iFJF iFJF 2011-2015 6.6L Chevy Silverado GMC Sierra Duramax 4" DPF Delete Pipe & Cooler EGR Valve Delete Kit
Product Overview The iFJF Duramax LML DPF Delete + EGR Cooler/Valve Delete Combo Kit delivers everything you need to eliminate both the restrictive diesel particulate filter (DPF) and problematic exhaust gas recirculation (EGR) system from your 2011–2015 Chevrolet Silverado or GMC Sierra 6.6L Duramax. This is the ultimate bolt-on performance upgrade — one box, one installation, massive gains. Key Features 4" DPF Delete Race Pipe — 409 stainless steel, mandrel-bent, 3-piece bolt-on design EGR Cooler Delete — Billet aluminum block-off plates, eliminates coolant passage to EGR EGR Valve Delete — Intake closing plate + exhaust block-off plate 100% Bolt-On — No cutting, welding, or fabrication required Includes All Hardware — Clamps, bolts, screws, cooling hose included Direct Replacement — Retains factory intake and exhaust manifold Vehicle Compatibility Year Make Model Engine 2011–2015 Chevrolet Silverado 2500HD / 3500HD 6.6L Duramax LML 2011–2015 GMC Sierra 2500HD / 3500HD 6.6L Duramax LML Performance Gains Metric Before After Fuel Economy (Combined) 13–14 MPG 18–19 MPG Exhaust Gas Temp High (restricted) 250–350°F Lower Throttle Response Delayed Immediate Horsepower (with tune) Stock +30–50 HP Package Includes 3 × DPF Delete Pipes (4") 1 × Air Intake Closing Plate 1 × Exhaust Block-Off Plate 1 × Three-Terminal Cooling Hose 4 × Hose Clamps 8 × Mounting Screws 3 × Exhaust Clamps 2 × Bolts Complete Hardware Kit Frequently Asked Questions Q: Can I retain my stock intake manifold with this kit?A: Yes. This kit is designed to delete the EGR actuator valve and cooler while keeping your factory intake and exhaust manifold. Q: Do I need to tune immediately after installation?A: Yes. The truck will throw codes and potentially enter limp mode without a DPF/EGR-delete capable tuner. Have your tuner ready before you start the install. Q: What's the fuel economy improvement?A: Customers typically report a combined mileage increase from 13–14 MPG to 18–19 MPG after DPF/CAT removal, depending on tire size and driving habits. Q: Does this kit include the downpipe?A: No. This is the DPF/CAT mid-pipe section plus EGR delete. A separate downpipe is available for the turbo-to-midpipe section. Related Products Shop All EGR Delete Kits Duramax LML 3" Downpipe Shop All DPF Delete Pipes ⚠️ Off-Road / Competition Use Only: This product is intended for off-road or competition vehicles only. Not legal for highway use on emissions-controlled vehicles in the US and many other jurisdictions. Check local and federal regulations before purchasing. Removal of emissions equipment may void your vehicle warranty. 🔗 Duramax Diesel Resources & Maintenance 📖 Related Guides: L5P Duramax Fuel Filter Housing Cap Replacement — Complete DIY Guide Duramax Fuel Filter Housing: Compatibility Guide (2001–2024) Duramax 6.6L Oil Change: Complete DIY Guide (Every Generation) 🔍 Shop All Duramax 6.6L Parts → | EGR Delete Parts → | Exhaust System →
$296.38
iFJF 2013-2018 Dodge Ram 6.7L Cummins 4" Exhaust Tube Pipe Kit - Ram 2500/3500 Turbo Diesel
Product Overview Upgrade your 2013-2018 Dodge Ram 6.7L Cummins with this professional-grade exhaust pipe. Designed for the Ram 2500/3500, this kit delivers improved engine performance, reduced maintenance issues, and enhanced reliability. Whether you're a professional diesel mechanic or a DIY enthusiast, our precision-engineered components provide a bolt-on solution for your Dodge Ram truck. ⚠️ Off-Road Use Only: This product is intended for off-road and competition use only. Please check your local, state, and federal regulations before purchasing and installing emissions-related components. Key Features Precision Fit: Engineered specifically for 2013-2018 Dodge Ram 6.7L Cummins Ram 2500/3500 — direct bolt-on installation with no modifications required. Heavy-Duty Construction: Built with industrial-grade materials to withstand extreme temperatures and pressures in high-performance diesel applications. Complete Kit: Includes all necessary hardware — gaskets, bolts, block-off plates, and installation components for a straightforward install. Performance Gains: Eliminates common failure points in the OEM EGR/exhaust system, improving exhaust flow, reducing EGTs (Exhaust Gas Temperatures), and enhancing throttle response. Corrosion Resistant: All components feature corrosion-resistant finishes to withstand road salt, moisture, and extreme weather conditions. Compatibility Year Make Model Engine 2013 Dodge/Ram 2500/3500 6.7L Cummins Diesel 2014 Dodge/Ram 2500/3500 6.7L Cummins Diesel 2015 Dodge/Ram 2500/3500 6.7L Cummins Diesel 2016 Dodge/Ram 2500/3500 6.7L Cummins Diesel 2017 Dodge/Ram 2500/3500 6.7L Cummins Diesel 2018 Dodge/Ram 2500/3500 6.7L Cummins Diesel Why Choose iFJF Direct? Quality Assurance: Every component undergoes rigorous quality control inspection before shipping. Expert Support: Our diesel specialists know 6.7L Cummins trucks inside out — installation help is just a message away. Frequently Asked Questions Q: Is this kit compatible with my 2013 Dodge Ram Ram 2500/3500?A: Yes! This kit is designed as a direct bolt-on for 2013-2018 Dodge Ram 6.7L Cummins Ram 2500/3500. No modifications are required for installation on stock vehicles. Q: What tools do I need for installation?A: Basic hand tools including socket set (8mm-19mm), torque wrench, flathead and Phillips screwdrivers, and penetrating oil for rusted fasteners. Most experienced DIY mechanics can complete the installation in 2-4 hours. Q: Will this delete kit trigger a check engine light (CEL)?A: This is a hardware-only kit. For complete functionality, appropriate ECU tuning is recommended to prevent DTCs (Diagnostic Trouble Codes). Professional tuning services are available from third-party providers. Q: Are gaskets and hardware included?A: Yes — all necessary gaskets, bolts, block-off plates, and mounting hardware are included in the kit. We recommend having replacement exhaust manifold gaskets on hand if your vehicle has high mileage. Q: How does this compare to OEM parts?A: Our components are engineered to solve the known failure points in the OEM emissions system. By eliminating problematic EGR coolers, valves, and restrictive exhaust components, you'll experience improved reliability, better fuel economy, and reduced maintenance costs. Q: What material are the block-off plates made from?A: Block-off plates are CNC-machined from 6061-T6 billet aluminum (or 304 stainless steel where noted) — far superior to OEM cast components that are prone to cracking and leaking under heat cycling. Q: Do you offer a warranty?A: Yes! All iFJF Direct products come with a satisfaction guarantee. If you have any issues with fitment or quality, contact our support team for a replacement or refund. Related Products iFJF 2013-2014 6.7L Cummins Dodge Ram Cab & Chassis Throttle Valve Cooler Diesel iFJF 2013-2014 6.7L Dodge Ram Cummins 3500 4'' Exhaust Tube Pipe/Cab & Chassis T iFJF 2013-2018 6.7L Cummins Diesel EGR Delete Kit for Cab & Chassis Dodge Ram iFJF 2013-2018 6.7L Dodge RAM 2500 3500 Cummins Diesel EGR Delete Cooler Throttl Related Guide Read our The TRUTH about EGR DELETES... Actual Science! for diesel performance insights, EGR system overview, and off-road tuning considerations.
$172.31
iFJF CCV Reroute Kit for 2011-2023 Ford 6.7L Powerstroke — F-250/F-350/F-450/F-550
Product Overview The iFJF CCV/PCV Reroute Kit for 2011-2023 Ford 6.7L Powerstroke F-250, F-350, F-450, F-550 Super Duty eliminates one of the most persistent issues with the 6.7L Powerstroke platform: crankcase oil vapor contaminating the intake system. The factory CCV (Closed Crankcase Ventilation) system routes oil-laden crankcase gases back into the turbo inlet — coating your intercooler, intercooler pipes, intake manifold, and intake valves with sticky carbon deposits over time. Our kit reroutes crankcase vapors away from the intake tract, keeping your intake system clean and your engine breathing freely. Each component is CNC-machined from 6061-T6 billet aluminum with a black anodized finish — built to outlast your truck. Key Features Venturi-Style Flow Design: Streamlined internal routing eliminates the need for restrictive internal baffles. No sharp angles means better crankcase pressure relief and zero oil dripping. Complete CCV/PCV System Replacement: Reroutes crankcase ventilation vapors away from the intake tract — stops intercooler and intake manifold oil contamination at the source. CNC Billet 6061-T6 Aluminum: All block-off components machined from aerospace-grade aluminum with black anodized finish. Won't crack, warp, or degrade like plastic OEM parts. Oil-Resistant Hoses & Fittings: Heavy-duty nitrile rubber hoses with reinforced walls resist oil degradation and heat cycling. Stainless steel hose clamps included. Direct Bolt-On Installation: Uses factory mounting points — no cutting, drilling, or welding. All gaskets, bolts, and hardware included in the box. Improved Turbo & Intercooler Health: By preventing oil mist from entering the intake, this kit protects your turbo compressor wheel, intercooler, and intake valves from carbon buildup. Compatibility Chart Year Make Model Engine Notes 2011-2023 Ford F-250 Super Duty 6.7L Powerstroke V8 Turbo Diesel All cab configurations 2011-2023 Ford F-350 Super Duty 6.7L Powerstroke V8 Turbo Diesel SRW & DRW 2011-2023 Ford F-450/F-550 Super Duty 6.7L Powerstroke V8 Turbo Diesel Chassis Cab & Pickup Specifications Specification Detail Material CNC Billet 6061-T6 Aluminum, Oil-Resistant Nitrile Rubber, Stainless Steel Hardware Finish Black Anodized Hose Type Reinforced Nitrile Rubber — Oil & Heat Resistant Installation Direct Bolt-On — No Modifications Required Estimated Install Time 1-2 Hours (DIY); 30-45 Min (Professional) Warranty 1-Year Limited Warranty Why Choose iFJF? Engineered for the 6.7L: Not a universal kit adapted to fit. Every component was designed specifically for the 2011-2023 Ford 6.7L Powerstroke platform. Cleaner Intake = Healthier Engine: Stopping oil mist at the source means cleaner intercoolers, turbochargers, and intake valves — reduced maintenance and longer component life. No Tuning Required: Unlike EGR deletes, this CCV reroute typically does not trigger a check engine light on most trucks. Plug-and-play installation. Complete Hardware Kit: Every bolt, gasket, clamp, and fitting is included. You won't need to source anything separately. Frequently Asked Questions Q: Will this CCV reroute cause a check engine light?A: On most 2011-2023 6.7L Powerstroke trucks, this kit does NOT trigger a CEL. The CCV system is not monitored by the ECU in the same way as the EGR system. However, 2017+ models with advanced emissions monitoring may occasionally log a soft code. Q: How does oil get into my intake in the first place?A: The factory CCV system routes crankcase blow-by gases — which contain atomized oil — directly into the turbo inlet. Over thousands of miles, this oil mist coats the entire intake tract: turbo compressor, intercooler, intercooler piping, intake manifold, and valves. The result is reduced airflow, higher EGTs, and carbon-caked intake valves. Q: Do I need to empty the catch can regularly?A: No! Unlike many aftermarket catch cans that require manual draining every few thousand miles, our system features an auto-drain design that returns separated oil to the crankcase. It's truly maintenance-free. Q: Is this kit compatible with a deleted truck?A: Yes. This CCV kit works on both stock and deleted 6.7L Powerstroke trucks. It's a common first mod for owners who want to protect their intake system without touching emissions equipment. Q: What's the difference between the basic reroute and the catch can version?A: The basic reroute kit vents crankcase gases externally. The catch can version (this product) captures oil vapor and returns condensed oil to the crankcase — providing the cleanest solution with zero oil residue and zero odor. Q: Can I install this myself?A: Absolutely. This is one of the easiest 6.7L Powerstroke mods to install. Most DIYers complete the job in 1-2 hours with basic hand tools. Detailed instructions are included, and our US-based support team is available if you have questions. Q: Does the CCV reroute affect engine performance?A: It doesn't add horsepower directly, but by keeping your intake system clean, it prevents the gradual power loss and efficiency drop caused by carbon buildup. Many owners report improved throttle response after installation, particularly on higher-mileage trucks with existing intake contamination. California Proposition 65 Warning: This product is intended for off-road/competition use. Check local regulations before installation.
$79.99
iFJF iFJF 2011-2017 6.7L Ford Powerstroke 4" Muffler Exhaust Delete Pipe & CCV PCV Reroute Engine Ventilation Kit
Product Overview The iFJF 6.7L Powerstroke 4-inch Muffler Exhaust Delete Pipe & CCV/PCV Reroute Engine Ventilation Kit is the ultimate clean-air upgrade for your 2011–2017 Ford F250/F350/F450 Super Duty. This comprehensive kit deletes the restrictive DPF/CAT/SCR exhaust system with a 4-inch T409 stainless pipe while also installing a CCV (crankcase ventilation) reroute system that prevents oil mist and carbon buildup from contaminating your intake and intercooler. What's Included 4" Exhaust Delete Pipes (2-Piece) — T409 stainless, 2mm wall, replaces DPF/CAT/SCR CCV/PCV Reroute Kit — Turbo piping kit with ¾" × 6ft 100% silicone reinforced hose Black Anodized Components — Premium corrosion-resistant finish Venturi-Style Design — Eliminates need for restrictive baffles, virtually no oil loss Key Features Vents Crankcase Blow-By — Prevents oil deposits in the engine and intake system No Boot Soak or Intake Gumming — Extends the longevity of turbo and intercooler components Eliminates Factory CCV Box — Frees up engine bay space for additional modifications Streamlined Routing — No angled bends = better pressure flow, no oil dripping 100% Silicone Reinforced Hose — Designed specifically for oil applications, 6ft length T409 Stainless + Billet Aluminum — Premium materials throughout Vehicle Compatibility Year Make Model Engine 2011–2017 Ford F250 / F350 / F450 Super Duty 6.7L Powerstroke Diesel ⚠️ NOT for: Cab & Chassis commercial trucks. Fits Crew Cab short bed & long bed pickup configurations. Performance Benefits +4–5 MPG — Combined DPF delete fuel economy gain Cleaner Combustion — No oil residue in the intake = stronger, more efficient combustion Reduced Maintenance — No more intercooler cleaning, no CCV filter replacements Engine Bay Organization — CCV box removal opens up space for turbo upgrades and dual fueler kits Virtually Zero Oil Loss — Venturi design means no puddles under the truck Installation ~1–1.5 hours with basic hand tools. Cutting may be required for short bed configurations. Tuner REQUIRED for exhaust delete portion. All clamps, hangers, and hardware are included. Factory hardware may need to be reused for some connections. Frequently Asked Questions Q: Does the CCV reroute actually prevent oil in the intercooler?A: Yes. By venting crankcase gases externally instead of recirculating through the intake, the CCV reroute eliminates the source of oil residue that normally coats intercooler pipes and boots. Q: Will this kit cause oil drips under my truck?A: No. The venturi-style design and streamlined routing virtually eliminate oil loss. This is not an "open dump" CCV, it's a properly engineered ventilation system. Q: Is this street legal?A: The exhaust delete portion is for off-road/competition use only. Check local regulations before installing on a road-going vehicle. Related Products 6.7L Exhaust Delete + EGR Kit 6.7L Powerstroke 4" DPF & EGR Delete Kit Shop All EGR Delete Kits
$289.57
iFJF 2015.5-2016 Chevy/GMC Duramax 4" Diesel LML DPF & CAT Delete
4" DPF & CAT Delete Exhaust Pipe for 2015-2016 6.6L Duramax LML Turbo Diesel Unlock the full potential of your 2015-2016 Chevrolet Silverado or GMC Sierra 2500HD/3500HD with the 6.6L Duramax LML Turbo Diesel using this 4" mandrel-bent DPF and CAT delete pipe. The factory emissions system – including the Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC/CAT) – creates substantial exhaust backpressure that robs horsepower, fuel economy, and reliability. This single-piece delete pipe replaces both restrictive components with a free-flowing 4" mandrel-bent exhaust. Why Delete Your LML DPF & CAT? Excessive Backpressure: DPF + CAT create significant restriction, increasing EGTs and limiting performance. Fuel Dilution During Regen: Active regeneration injects raw diesel during exhaust stroke, contaminating engine oil. Poor Fuel Economy: Regeneration burns extra fuel. DPF restriction reduces efficiency. Owners see 2-4 MPG improvement. CP4 Injection Pump Risk: DPF regeneration cycles contribute to fuel system stress on the already-sensitive CP4 high-pressure pump. Regen Failures: Incomplete regeneration cycles lead to plugged DPF requiring $2,500+ replacement. What's Included Component Material Function 4" DPF/CAT Delete Pipe T409 Mandrel-Bent Stainless Steel Replaces factory DPF and DOC in one piece 3-Hole Turbo Flange CNC Laser-Cut Steel Factory-fit connection at turbo outlet Mounting Hardware & Clamps Grade 10.9 Steel Complete hardware kit for bolt-on installation Vehicle Compatibility Year Make Model Engine 2015-2016 Chevrolet / GMC Silverado 2500HD / Sierra 2500HD 6.6L Duramax LML V8 Turbo Diesel 2015-2016 Chevrolet / GMC Silverado 3500HD / Sierra 3500HD 6.6L Duramax LML V8 Turbo Diesel Performance Benefits +20-30 HP / +40-60 lb-ft: Eliminated DPF/CAT backpressure frees significant power. 2-4 MPG Improvement: No regen fuel waste, improved combustion efficiency. 100-200°F Lower EGTs: Critical for towing safety on long grades. Faster Turbo Response: Reduced backpressure equals quicker spool. Aggressive straight-pipe diesel sound. Installation Overview This system is engineered for bolt-on installation. All factory hanger points are used. Estimated installation time: 2-4 hours with basic hand tools, an exhaust cutter or saw, and a floor jack or lift. No welding required. Frequently Asked Questions Q: Will this fit my 2016 Silverado 3500HD Duramax?A: Yes. This kit is designed for all 2015-2016 Chevrolet Silverado 2500HD/3500HD and GMC Sierra 2500HD/3500HD with the 6.6L Duramax LML engine. All cab and bed configurations supported. Q: Do I need a tuner after installation?A: Yes. The factory ECM will detect DPF and CAT removal. A compatible tuner is required to disable DPF-related functions and optimize engine calibration. Q: Is this a complete bolt-on kit?A: Yes. All pipes, flanges, clamps, and hardware are included. No additional parts or fabrication required. Q: What's the difference between the muffler and no-muffler versions?A: The muffler version includes a straight-through performance muffler that provides a deep, aggressive tone while controlling in-cab drone. The no-muffler version produces a louder, more aggressive straight-pipe sound. Both deliver identical performance gains. Q: Will my CP4 injection pump be affected?A: Eliminating DPF regeneration cycles reduces stress on the fuel system. While this doesn't directly prevent CP4 failure, many owners report improved long-term reliability after removing the regeneration system. Q: Is this product emissions-compliant?A: This product is designed for off-road and competition use only. Not intended for use on emissions-regulated vehicles. Check local laws before purchase. Related Products for Your LML Duramax LMM Duramax EGR Delete KitEGR valve & cooler delete Duramax CCV Reroute KitTurbo piping & CCV reroute LMM 3" Downpipe2004.5-2010 Duramax downpipe 1R-0750 Duramax Fuel FilterFor 2001-2016 6.6L Duramax Related Blog Posts LML Duramax DPF Delete: Performance & Reliability Guide Duramax CP4 Pump Failure Prevention Guide LML Duramax Common Problems & Reliability Upgrades ⚠️ Off-Road / Competition Use Only: This product is intended for off-road or competition vehicles only. Not legal for highway use on emissions-controlled vehicles in the US and many other jurisdictions. Check local and federal regulations before purchasing. Removal of emissions equipment may void your vehicle warranty. 🔗 Duramax Diesel Resources & Maintenance 📖 Related Guides: L5P Duramax Fuel Filter Housing Cap Replacement — Complete DIY Guide Duramax Fuel Filter Housing: Compatibility Guide (2001–2024) Duramax 6.6L Oil Change: Complete DIY Guide (Every Generation) 🔍 Shop All Duramax 6.6L Parts → | EGR Delete Parts → | Exhaust System →
$235.99
iFJF 6.0L Powerstroke Up-Pipe Y-Pipe & EGR Cooler Valve Kit for 2003-2007 Ford F250-F450
Get everything you need in one complete package — the iFJF 6.0L Powerstroke Up-Pipe Y-Pipe & EGR Basic Cooler Valve Combo Kit. This all-in-one solution addresses two of the 6.0L's most common failure points simultaneously: leaking up-pipes and EGR cooler issues. Manufactured from T-304 stainless steel for the Y-pipe and aluminum alloy with silicone connections for the EGR components. For off-road and competition use only. Key Features & Benefits Two Critical Upgrades, One Box: Combines the heavy-duty up-pipe Y-pipe with EGR cooler and valve components — save money and labor by doing both at once. T-304 Stainless Up-Pipes: Mandrel-bent, TIG-welded stainless steel Y-pipe with built-in flex bellows — permanently solves up-pipe leaks. Complete EGR Solution: Includes EGR basic cooler and valve assembly for complete EGR system service or replacement. CNC-Machined Flanges: Precision-flat flange surfaces ensure a leak-free seal at every connection point. Everything Included: All gaskets, bolts, nuts, O-rings, and hardware included. Vehicle Compatibility Year Make Model Engine 2003-2007 Ford F-250/F-350/F-450 Super Duty 6.0L Powerstroke V8 Technical Specifications Up-Pipe Material T-304 Stainless Steel EGR Components Aluminum Alloy + Silicone Kit Type Combo (Up-Pipe Y-Pipe + EGR Cooler & Valve) Installation Time 6-8 Hours (Professional Recommended) ⚠️ Important Legal Notice This product is intended for OFF-ROAD AND COMPETITION USE ONLY. It is NOT legal for use on public roads. NOT CARB compliant. Frequently Asked Questions Q: Is this kit better than buying the parts separately?A: Yes — this combo kit saves you approximately 15-20% versus purchasing the up-pipe Y-pipe and EGR cooler/valve kit separately. Q: What else should I replace while doing this job?A: While the turbo is off, we recommend replacing: turbo mounting gaskets, turbo oil feed line and drain tube O-rings, and inspecting exhaust manifolds. Also a great time to install a coolant filtration system. Q: Should I do this work cab-on or cab-off?A: Experienced 6.0L mechanics can perform this work cab-on in 6-8 hours. Cab-off provides better access and may reduce labor time. Related Products 6.0L Coolant Filtration System 6.0L Up-Pipe Y-Pipe Only
$168.99
iFJF iFJF 1994-1998 5.9L 12V Dodge Cummins Diesel 3.5" Air Intake Elbow Charge Pipe Generic
High-Flow 3.5" Air Intake Elbow for 12-Valve Cummins The iFJF ER-0095 3.5" Air Intake Elbow Charge Pipe is a performance upgrade for 1994-1998 Dodge Ram 2500 and 3500 trucks equipped with the legendary 5.9L 12-Valve Cummins turbo diesel engine. The factory intake elbow between the turbocharger compressor outlet and the intercooler piping is a known restriction point on these engines, with a restrictive internal diameter and abrupt bends that limit airflow. Our upgraded 3.5" elbow features a larger internal diameter and smooth mandrel-bent design to maximize airflow from your turbocharger to the intercooler, resulting in improved turbo response, lower exhaust gas temperatures, and better overall engine efficiency. How Intake Flow Affects 12V Cummins Performance The 12-Valve Cummins is famous for its mechanical simplicity and massive tuning potential. However, the engine's ability to make power is directly limited by how efficiently it can move air through the entire intake tract. The factory turbocharger on these engines (typically a Holset HX35 or HX40) moves a significant volume of air, but the stock compressor outlet elbow creates a bottleneck that increases turbocharger drive pressure and raises EGTs. By replacing the restrictive factory elbow with a larger, smoother-flowing unit, you reduce the pressure ratio across the turbocharger, allowing it to operate more efficiently. This is particularly beneficial on engines that have been tuned with increased fueling, where EGT management becomes critical. Vehicle Compatibility Make Model Years Engine Dodge Ram 2500 1994-1998 5.9L 12V I6 Cummins Turbo Diesel Dodge Ram 3500 1994-1998 5.9L 12V I6 Cummins Turbo Diesel Technical Specifications Specification Detail Diameter 3.5" (89mm) Internal Construction Mandrel-Bent Tubing Material Heavy-Gauge Steel / Aluminum Fitment Type Generic / Universal Fit Installation Requires Silicone Couplers & Clamps (Sold Separately) Application Turbo Compressor Outlet to Intercooler Piping Engine Code 6BT 5.9L 12-Valve SKU ER-0095 Key Benefits Reduces turbocharger compressor outlet restriction Can lower exhaust gas temperatures (EGTs) by 50-100°F under load Improves turbo spool response and reduces turbo lag Smooth mandrel-bent internal bore maximizes airflow velocity Simple bolt-on upgrade - one of the most cost-effective 12V mods Works with factory and aftermarket turbochargers Ideal foundation for future performance upgrades Frequently Asked Questions Q: What Cummins engines does this intake elbow fit?A: This 3.5" air intake elbow is designed for 1994-1998 Dodge Ram 2500 and 3500 trucks with the 5.9L 12-Valve Cummins turbo diesel engine. It replaces the factory intake elbow between the turbocharger compressor outlet and the intercooler piping. Q: Will this improve performance on my 12V Cummins?A: Yes, the larger 3.5" diameter and smooth internal bore reduce intake restriction compared to the factory elbow. This can improve turbo spool response, lower EGTs, and provide a small horsepower increase, especially when combined with a free-flowing air filter and larger exhaust system. Q: Is this a direct bolt-on replacement?A: This is a generic-fit intake elbow. The 3.5" diameter is a common upgrade size. Installation typically requires silicone couplers and T-bolt clamps (sold separately). Some trimming of factory piping or use of adapter couplers may be needed for a complete installation. Q: What material is the elbow made from?A: The intake elbow is constructed from heavy-gauge mandrel-bent tubing with a smooth internal surface for maximum airflow. The exterior features a durable finish to resist under-hood heat and corrosion common in diesel engine bays. Q: What are the benefits of upgrading the intake elbow?A: Upgrading from the restrictive factory elbow reduces turbocharger compressor outlet restriction, which can lower EGTs by 50-100°F under heavy load, improve throttle response, and reduce turbo lag. It's one of the most cost-effective bolt-on upgrades for 12V Cummins performance. Related Products iFJF Dodge Ram Cummins 5.9L / 6.7L Diesel Oil Filter iFJF 1906 AVS2 650CFM 4-Barrel Performance Carburetor iFJF Camaro Firebird L98 305 TPI EGR Block Off Delete Kit Blog Resources 12V Cummins Performance & Tuning Guides iFJF Diesel Performance News & Updates
$79.88
iFJF Coolant Bypass Kit for 2003-2007 5.9L Dodge Ram Cummins Diesel Engine
Solve the 5.9L Cummins' uneven cooling problem with the iFJF Coolant Bypass Kit. The factory cooling system on 2003-2007 Dodge Ram Cummins engines suffers from poor coolant circulation at the rear cylinders (cylinders 5 and 6), which run significantly hotter than the front cylinders. This temperature imbalance leads to premature wear, reduced performance, and potential head gasket issues. Our bypass kit redirects coolant flow to ensure consistent temperatures across all six cylinders, extending engine life and improving overall reliability. Key Features & Benefits Lower Rear Cylinder Temperatures: Actively reduces coolant temperature at cylinders 5 and 6 by up to 30°F, eliminating the factory hot-spot that accelerates engine wear. High-Quality Aluminum Construction: CNC-machined from billet aluminum with a corrosion-resistant finish — built to handle diesel coolant chemistry and vibration. Metal & Polyester-Reinforced Hoses: Durable hoses designed to withstand high coolant temperatures and pressures without ballooning or cracking. Even Cooling Across All Cylinders: Ensures consistent temperature distribution, reducing thermal stress on the head gasket and cylinder head. Extended Engine Life: Even cooling means less thermal cycling stress, longer head gasket life, and more miles between rebuilds. Complete Bolt-On Kit: Includes all hoses, fittings, clamps, and mounting hardware. No cutting or permanent modification required. Vehicle Compatibility Year Make Model Engine Notes 2003-2007 Dodge Ram 2500 5.9L Cummins ISB Direct Fit 2003-2007 Dodge Ram 3500 5.9L Cummins ISB Direct Fit Technical Specifications Material Billet Aluminum + Metal/Polyester Hoses Kit Type Coolant Bypass Kit (Complete) Temperature Reduction Up to 30°F at Rear Cylinders Installation Bolt-On (No Cutting Required) Installation Time 2-3 Hours Installation Guide Installation is straightforward with basic hand tools. The kit mounts at the rear of the cylinder head near the heater core connections. Drain a portion of the coolant, install the bypass fittings at the specified locations, route the hoses, and secure with the provided clamps. Refill and bleed the cooling system. A coolant flush is recommended before installation for optimal results. Estimated DIY time: 2-3 hours. Frequently Asked Questions Q: Why do the rear cylinders run hotter on a 5.9L Cummins?A: The factory cooling system design sends coolant from the water pump through the front of the block first. By the time coolant reaches cylinders 5 and 6 at the rear, it has already absorbed significant heat. The bypass kit provides a secondary coolant path to the rear, equalizing temperatures. Q: Will this fix my head gasket issues?A: While it won't fix an already-blown head gasket, installing this bypass kit can help prevent future head gasket failures by reducing thermal stress from uneven cylinder temperatures. Combine it with ARP head studs for maximum protection. Q: Is this compatible with a coolant filtration system?A: Yes! This bypass kit works alongside coolant filtration systems. In fact, using both together provides the best protection — filtered coolant with even temperature distribution. Related Products 6.0L Powerstroke Coolant Filtration System 5.9L Cummins High-Flow Intake Elbow
$96.59
iFJF 4" Cat & DPF Delete Pipe for 2008-2010 Ford 6.4L Powerstroke — F250/F350/F450/F550
Product Overview Eliminate the restrictive factory catalytic converter and Diesel Particulate Filter (DPF) from your 2008-2010 Ford Super Duty with the iFJF 4-Inch Cat & DPF Delete Pipe. The 6.4L Powerstroke's factory exhaust after-treatment system is notorious for creating excessive backpressure, causing regeneration cycles that waste fuel and dilute engine oil. This mandrel-bent T304 stainless steel replacement pipe restores unrestricted exhaust flow, unlocking horsepower, improving fuel economy, and dramatically lowering exhaust gas temperatures. ⚠️ OFF-ROAD / COMPETITION USE ONLY: This product is intended for off-road, racing, and competition vehicles only. Removing catalytic converters and DPFs from on-highway vehicles violates the Clean Air Act. Check local regulations before installation. Key Features Deletes Both Cat & DPF: Single pipe replaces the entire catalytic converter and DPF assembly in one bolt-on unit — eliminates both major exhaust restrictions. 4-Inch Mandrel-Bent Tubing: Full 4.0-inch T304 stainless steel maintains consistent diameter through all bends for maximum flow capacity. Eliminates Regeneration Cycles: No more active DPF regens that waste diesel fuel, dilute engine oil with unburned fuel, and reduce engine life. Massive EGT Reduction: Exhaust gas temperatures drop 200-400°F under load without the DPF restriction — critical for the heat-sensitive 6.4L Powerstroke. Direct Bolt-On Installation: Uses factory exhaust hangers and flanged connections — no cutting, welding, or fabrication required. Corrosion-Resistant: T304 stainless construction withstands extreme exhaust temperatures and resists rust in all weather conditions. Compatibility Year Make Model Engine 2008-2010 Ford F-250 / F-350 / F-450 / F-550 Super Duty 6.4L Powerstroke V8 Turbo Diesel Specifications Specification Detail Material T304 Stainless Steel Diameter 4.0 inches Bend Type Mandrel-Bent Replaces Catalytic Converter + DPF Assembly Fitment 2008-2010 Ford 6.4L Powerstroke Super Duty Installation Bolt-on (uses factory hangers) Why Choose iFJF iFJF Direct engineers exhaust solutions specifically for the demanding 6.4L Powerstroke platform. We understand the unique challenges of Ford's Navistar-sourced diesel — from heat management to backpressure sensitivity. Our 4-inch delete pipes are fabricated using precision mandrel-bending that maintains perfect internal diameter through every curve, ensuring the unrestricted flow your turbo and engine deserve. Frequently Asked Questions Q: Will this fit my 2009 F-350 6.4L?A: Yes. This pipe fits all 2008-2010 Ford F-250, F-350, F-450, and F-550 Super Duty trucks equipped with the 6.4L Powerstroke diesel. Cab configuration and bed length do not affect fitment. Q: Do I need tuning with this delete pipe?A: Yes. Removing the DPF and catalytic converter requires ECM tuning to disable regeneration cycles and prevent diagnostic trouble codes. A DPF/EGR-compatible tuner is mandatory. Q: Will this stop the DPF regeneration cycles?A: When paired with proper tuning, yes. The truck will no longer perform active regenerations, eliminating the fuel washdown issue that plagues 6.4L engines in stock form. Q: Is the 6.4L known for DPF-related issues?A: Yes. The 6.4L Powerstroke is infamous for DPF regeneration cycles that inject fuel during the exhaust stroke, causing cylinder washdown and oil dilution. Deleting the DPF is a common reliability modification. Q: Does this affect the exhaust brake function?A: The factory exhaust brake is controlled by the variable geometry turbo (VGT), not the DPF. The exhaust brake will continue to function normally after DPF removal.
$152.49
iFJF 3" Downpipe for 2004-2010 Duramax 6.6L — Stainless V-Band Exhaust
Product Overview The 3" Stainless Downpipe for 2004-2010 Duramax 6.6L LLY LBZ LMM is a performance exhaust upgrade for 2004.5-2010 GM trucks with the 6.6L Duramax diesel. Mandrel-bent 3.0" T304 stainless steel tubing with V-band flange connection eliminates the restrictive factory downpipe for dramatically improved exhaust flow. Expect 10-15 HP gain, faster turbo spool, and lower EGTs. ⚠️ IMPORTANT: OFF-ROAD / COMPETITION USE ONLY. Not for street use on licensed vehicles in California, New York, or CARB states. Verify local regulations before purchase. Key Features 3.0" Mandrel-Bent Tubing — Full 3" diameter with smooth mandrel bends. No crush bends or restrictions. T304 Stainless Steel — Premium stainless resists rust and corrosion far better than aluminized steel. V-Band Flange — Leak-free seal at turbo outlet. Quick-disconnect simplifies future service. 10-15 HP Gain — Measurable horsepower and torque gains, especially mid-range where Duramax engines tow. Lower EGTs — Reduced backpressure drops EGTs 100-150°F under load. Direct Fitment — No cutting, welding, or modification required. Compatibility Chart Year Make Model Engine 2004.5-2010 Chevrolet Silverado 2500HD 6.6L Duramax Diesel 2004.5-2010 Chevrolet Silverado 3500HD 6.6L Duramax Diesel 2004.5-2010 GMC Sierra 2500HD 6.6L Duramax Diesel 2004.5-2010 GMC Sierra 3500HD 6.6L Duramax Diesel Package Includes Component Qty Details 3" Stainless Downpipe 1 T304 Stainless Steel, 3.0" OD, V-Band Specifications Spec Value Material T304 Stainless Steel Diameter 3.0" OD (Inlet & Outlet) Flange V-Band Bend Type Mandrel Bent HP Gain 10-15 HP (Estimated) SKU DP-0185 Frequently Asked Questions Q: Will this fit my 2008 LMM Duramax?A: Yes. Fits all 2004.5-2010 Silverado HD and Sierra HD with 6.6L Duramax — LLY, LBZ, LMM. Check compatibility table. Q: Do I need a tune?A: Can be installed without tune. Custom tune maximizes gains, especially with other bolt-on mods. Q: Is this a DPF/CAT delete pipe?A: No. This is a turbo downpipe only — replaces factory downpipe from turbo to exhaust connection. Does NOT remove DPF or catalytic converter. Q: Will this pass emissions?A: For off-road/competition use only. Not CARB-compliant for on-road use in emissions-testing states. Q: Can I install myself?A: Intermediate skills, 2-4 hours. Need sockets, wrenches, penetrating oil. V-band simplifies installation vs bolt-on designs. Professional install recommended. Related Products EGR Delete Kits for Duramax DPF Delete Pipe Collection High Flow Intake Elbow for LLY DPF Delete Pipe Collection Warranty & Support 12-month warranty. Contact sales@ifjf.cn. US warehouse — 3-7 business days. Unlock your Duramax's hidden power — upgrade your downpipe today! 🔗 Duramax Diesel Resources 📖 Maintenance Guides: Duramax Fuel Filter Housing: Complete Compatibility Guide (2001–2024) 2001–2016 Duramax Fuel Filter Replacement: Complete DIY Guide Top 5 Diesel Fuel Filter Housing Problems (And How to Fix Them) Duramax 6.6L Oil Change: Complete DIY Guide (Every Generation) 🔍 Shop All Duramax 6.6L Parts → | Browse All Fuel Filters →
$118.11