Search results for "Multiport Valves"

Overview The iFJF 800M4 Vent Float Repair Kit is a precision replacement component for 1-inch 800QT series backflow prevention valves. Designed to restore proper vent float operation in irrigation and plumbing systems, this kit includes all necessary seals and components to rebuild your 800M4 backflow valve assembly. Compatible with OEM part numbers 0887715, 887715, and RK 800M4-FR-V1, it provides a cost-effective alternative to full valve replacement. Key Features Exact Fit Replacement: Precision-molded to match the original 800M4 vent float specifications, ensuring a leak-free seal and reliable backflow prevention for irrigation systems. Complete Repair Kit: Includes all seals, gaskets, and float components needed for a full rebuild of the 800QT series 1-inch backflow valve vent assembly. Chemical-Resistant Materials: Constructed from durable elastomers that withstand chlorine, irrigation chemicals, fertilizers, and UV exposure for extended outdoor service life. Cost-Effective Rebuild: Save 60-80% compared to replacing the entire backflow preventer assembly. This repair kit pays for itself with a single use. Universal 1-Inch Compatibility: Works with 800QT, 800M4, and compatible 1-inch backflow preventer assemblies from major manufacturers including Febco and Watts. DIY-Friendly Install: Drop-in replacement design with no special tools required. Complete the repair in under 30 minutes with basic hand tools. Compatibility Brand Model Size Febco 800M4 1" Febco 800QT 1" Watts 800M4-FR 1" Specifications Specification Value OEM Part Numbers 0887715, 887715, RK 800M4-FR-V1 Valve Size 1 inch Valve Series 800QT / 800M4 Application Backflow Prevention Valve Material Chemical-Resistant Elastomer SKU FJ-TOOL155-800M4 Why Choose iFJF? At iFJF Direct, we specialize in high-quality replacement parts backed by rigorous quality control. Each repair kit component is manufactured to meet or exceed OEM specifications, ensuring reliable backflow prevention performance. We stand behind every product with responsive customer support and a satisfaction guarantee. Backflow valve failure can contaminate your water supply — trust a properly engineered repair kit for this critical safety device. Frequently Asked Questions Q: Does this fit all 1-inch backflow valves?A: This kit is specifically designed for Febco 800M4 and 800QT series 1-inch backflow prevention valves. It is also compatible with OEM part numbers 0887715 and 887715. Please verify your valve model before ordering. Q: How do I know if my vent float needs replacement?A: Common signs include water leaking from the vent, the valve failing annual backflow testing, or the float showing visible cracks or deterioration. If your backflow valve fails its annual test, the vent float is often the root cause. Q: Is this a complete rebuild kit for the entire valve?A: This is a vent float repair kit specifically. It includes all components needed to rebuild the vent float assembly — seals, gaskets, and the float itself. For a complete valve rebuild, additional kits may be needed. Q: Do I need a licensed plumber to install this?A: While many experienced DIYers can perform the repair, backflow prevention devices are part of your water safety system. We recommend having the valve professionally tested after repair to ensure compliance with local plumbing codes and to verify proper backflow prevention. Q: How often should backflow valves be serviced?A: Most municipalities require annual backflow testing. Internal components like the vent float typically need replacement every 3-5 years depending on water quality, chemical exposure, and frequency of use. A proactive replacement schedule prevents unexpected failures. Package Includes 1 x 800M4 Vent Float Repair Kit for 1" Backflow Valve | Complete seals & components | Product support documentation

Read more less

Product Overview Give your 2008-2010 Ford 6.4L Powerstroke the most comprehensive reliability upgrade available with the iFJF Triple Combo Kit: Bypass Exhaust Up-Pipes, Coolant Filtration System, and EGR Valve Delete Kit. This all-in-one solution addresses the three most critical failure points of the Navistar 6.4L — cracked exhaust up-pipes, coolant system contamination, and the failure-prone EGR system. By combining all three upgrades into one installation, you save on labor costs while giving your Powerstroke the bulletproofing it needs for heavy towing, high mileage, and long-term durability. ⚠️ OFF-ROAD / COMPETITION USE ONLY: This product is intended for off-road, racing, and competition vehicles only. Removing emissions equipment from on-highway vehicles violates the Clean Air Act. Check local, state, and federal regulations before installation. Kit Components Component 1 — Bypass Exhaust Up-Pipes: Heavy-duty T304 mandrel-bent stainless up-pipes replace the crack-prone OEM pipes and route exhaust directly to the turbo, eliminating the EGR circuit. Component 2 — Coolant Filtration System: Inline coolant filter assembly with high-capacity filter element removes casting sand, rust scale, and silicate gel from the cooling system — the #1 cause of EGR cooler and oil cooler failure on the 6.4L. Component 3 — EGR Valve Delete Kit: CNC-machined 6061-T6 aluminum block-off plates with Viton O-ring seals completely eliminate both EGR valves and EGR coolers from the engine. Key Features Triple Protection: Three failure-point solutions in one box — no need to source separate kits and hope they work together. Coolant Filtration Is Critical: The 6.4L is notorious for casting sand left in the engine block from the manufacturing process. This sand circulates and erodes EGR coolers, oil coolers, and water pump impellers. Our filtration system traps particles as small as 15 microns. Heavy-Duty Up-Pipes: 16-gauge T304 stainless with full-penetration TIG welds at all connections — the permanent fix for the 6.4L up-pipe cracking problem. Complete EGR Elimination: Block-off plates for both horizontal and vertical EGR coolers with Viton O-rings rated to 400°F continuous temperature. Everything Included: Up-pipes, EGR plates, coolant filter housing, high-capacity filter element, mounting bracket, hoses, clamps, gaskets, O-rings, and Grade 8 hardware. Preventive Maintenance Value: The coolant filtration system alone can save thousands in repairs by preventing the cascade failure of EGR cooler → oil cooler → head gaskets that plagues unfiltered 6.4L engines. Compatibility Year Make Model Engine 2008-2010 Ford F-250 / F-350 / F-450 / F-550 Super Duty 6.4L Powerstroke V8 Turbo Diesel Specifications Component Specification Up-Pipe Material T304 Stainless Steel, 16-Gauge, Mandrel-Bent EGR Plate Material 6061-T6 Billet Aluminum, CNC-Machined Coolant Filter Micron Rating 15 Microns (Nominal) Coolant Filter Media Synthetic/Cellulose Blend, High-Capacity Filter Housing Heavy-Duty Aluminum with 1/2" NPT Ports O-Ring Material Viton (High-Temperature, Chemical Resistant) Installation Bolt-on, professional installation recommended (8-12 hrs) Why Choose iFJF iFJF Direct developed this triple combo kit after years of analyzing 6.4L Powerstroke failure patterns. The data is clear: casting sand contamination → eroded EGR cooler → internal coolant leak → hydrolocked engine is a predictable failure chain that can be completely prevented. Our coolant filtration system catches the sand before it causes damage; our EGR delete removes the vulnerable component entirely; and our bypass up-pipes eliminate the exhaust leaks that plague even untouched engines. Installing all three at once is the smartest investment a 6.4L owner can make. Frequently Asked Questions Q: Why does the 6.4L need a coolant filter?A: The Navistar engine block casting process leaves residual sand in the coolant passages. As the engine runs, this sand circulates and erodes internal components. A coolant filter is widely considered essential preventive maintenance for 6.4L longevity. Q: How often should I change the coolant filter?A: Change the first filter after 500 miles (it will catch a significant amount of casting sand). Subsequent filters can be changed at every other oil change or ~15,000 miles. Q: Does this kit include everything needed for installation?A: Yes. The kit includes up-pipes, EGR block-off plates, coolant filter housing, filter element, mounting bracket, hoses, hose clamps, gaskets, O-rings, and all required Grade 8 fasteners. Q: Is tuning required?A: Yes. The EGR delete portion requires ECM tuning to disable EGR-related diagnostic trouble codes. The up-pipe and coolant filter components do not affect engine electronics and can be installed without tuning. Q: Can I install this cab-on?A: Cab-on installation is possible but challenging due to the 6.4L's cramped engine bay. Many installers prefer cab-off for full access to the up-pipe and EGR cooler locations. Plan for a full weekend if doing it yourself cab-on.

Read more less

29539579 Spin-On Transmission Fluid Filter — Allison 1000/2000/2400 Series The iFJF 29539579 Spin-On Automatic Transmission Fluid Filter is a direct replacement for Allison 1000, 2000, and 2400 series automatic transmissions found in GM Duramax diesel trucks and medium-duty commercial vehicles. This filter replaces the old-style Allison part number 29537268 and provides high-efficiency filtration to protect your transmission's valve body, clutch packs, and torque converter from wear particles and debris. Allison transmissions are known for their durability — regularly reaching 300,000+ miles in commercial service — but they require clean ATF to achieve that lifespan. Contaminated fluid causes sticking valves, delayed shifts, and accelerated clutch wear. This spin-on filter captures particles as small as 25 microns while maintaining full transmission fluid flow under all operating conditions — from cold morning starts to heavy towing at highway speeds. Key Features Direct Allison Replacement: Replaces Allison 29539579 and old-style 29537268 spin-on transmission filters — exact dimensional match, guaranteed fit High-Efficiency Filtration: Multi-layer media captures wear particles, clutch material, and debris down to 25 microns — protecting precision valve body components Heavy-Duty Construction: Thick-gauge steel canister with corrosion-resistant coating withstands under-vehicle exposure to road salt, water, and debris Spin-On Design: Quick external filter change — no dropping the transmission pan required Silicone Anti-Drainback Valve: Maintains fluid in the filter between starts for immediate transmission protection on cold starts Transmission Compatibility Transmission Series Fluid Type Allison 1000 5-speed / 6-speed automatic TES-295 / TES-668 ATF Allison 2000 5-speed / 6-speed automatic TES-295 / TES-668 ATF Allison 2400 6-speed automatic TES-295 / TES-668 ATF Common Vehicle Applications Year Make Model Engine 2001-2019 Chevrolet Silverado 2500HD / 3500HD 6.6L Duramax V8 2001-2019 GMC Sierra 2500HD / 3500HD 6.6L Duramax V8 Various Multiple Medium-duty trucks, buses, specialty vehicles Allison-equipped platforms Technical Specifications Specification Value Filter Type Spin-On External Transmission Filter Replaces Allison 29539579, 29537268 (old style) Filtration Rating 25 micron absolute Thread Size Allison OEM-spec Service Interval Every transmission fluid change (25,000-50,000 miles depending on duty cycle) SKU FJ-9579 Why Replace Your Allison Transmission Filter? The Allison 1000/2000/2400 uses an external spin-on filter as its primary filtration stage (the internal pan filter is secondary). Over time, this external filter loads with clutch friction material, metal wear particles from gears and bearings, and oxidized fluid debris. A clogged filter restricts ATF flow — causing delayed engagement, slipping shifts, overheating, and eventual transmission failure. Replacing the spin-on filter at every fluid change is the simplest and most effective thing you can do for Allison transmission longevity. FAQ Q: Is this the spin-on external filter or the internal pan filter? A: This is the external spin-on filter — the one accessible without dropping the transmission pan. Allison 1000/2000/2400 transmissions use two filters: (1) An external spin-on filter (this part) that captures larger particles and is changed every fluid service, and (2) An internal pan filter that requires dropping the pan for replacement during major services. Replace the spin-on filter at every ATF change for maximum protection. Q: Does this fit my 2006 Duramax with Allison transmission? A: Yes — every Duramax-powered Silverado HD and Sierra HD from 2001 through 2019 uses the Allison 1000 series transmission (5-speed or 6-speed depending on year). This filter fits all of them. If your truck has the 6.6L Duramax diesel, it has an Allison — and this is the correct spin-on filter. Q: What's the difference between 29539579 and 29537268? A: 29537268 is the old-style Allison part number that has been superseded by 29539579. The 29539579 is the current production filter with improved media and anti-drainback valve design. Our filter replaces both numbers — if your service manual calls for either, this is the correct part. Q: How often should I change the Allison transmission spin-on filter? A: Allison recommends filter replacement at every transmission fluid change interval: 25,000 miles for severe duty (towing, commercial use, stop-and-go) and 50,000 miles for normal highway driving. Many Duramax owners servicing their own trucks change the spin-on filter at 30,000-mile intervals and do a full pan-drop with internal filter at 60,000-90,000 miles. Always follow your owner's manual for the specific Allison transmission in your vehicle. Q: What transmission fluid should I use with this filter? A: Use Allison-approved TES-295 or TES-668 specification ATF. Common options include Allison TranSynd, Mobil Delvac 1 ATF, and Castrol TranSynd. Do NOT use Dexron III or conventional ATF — Allison transmissions require TES-295 spec synthetic fluid. Using the wrong fluid can cause shift quality issues and accelerated wear. Check your owner's manual for the exact fluid specification for your model year. Q: Can I use this filter on a non-Allison transmission? A: No — this filter is specifically designed for Allison 1000, 2000, and 2400 series automatic transmissions. The thread pattern, gasket surface, and bypass valve settings are unique to Allison spin-on filter mounts. Using this on a different transmission (such as the GM 4L80E or Ford TorqShift) will result in a poor fit or no fit at all. Always verify your transmission model before ordering. Q: Do I need to drop the transmission pan to change this filter? A: No — the spin-on external filter is accessible from underneath the vehicle without removing the transmission pan. A standard filter wrench (or strap wrench for tight spaces) is all you need. Expect to lose about 0.5-1 quart of ATF when the filter is removed — have a drain pan ready. Top off the transmission fluid level after installation using the correct TES-295 spec ATF. 📖 Related Guides Duramax 6.6L Oil Change: Complete DIY Guide 🔧 Related Products TP3018 Fuel Filter — fuel/water separator for Duramax 6.6L TP3018 + 29539579 Combo — fuel filter + transmission filter bundle Fuel Filter Housing — billet aluminum 12642623 assembly

Read more less

Product Overview Eliminate the restrictive and failure-prone EGR system on your 2010-2014 Ram 2500/3500 6.7L Cummins with this EGR Throttle Valve & Cooler Delete Kit from iFJF. The factory EGR system recirculates hot, soot-laden exhaust gas back into your engine's intake — causing carbon buildup, oil contamination, reduced performance, and elevated EGTs. This complete hardware kit replaces the EGR components with precision-machined billet aluminum delete plates and pipes, restoring clean airflow and reliability to your Cummins engine. Why Delete the EGR on Your 6.7L Cummins? The 6.7L Cummins is one of the most durable diesel platforms ever built — but the emissions systems hold it back. The EGR cooler is a known failure point that can leak coolant into the intake, and the EGR valve introduces abrasive soot particles into the combustion chamber. For off-road and competition applications, removing these components dramatically improves engine health and performance. Key Features Complete EGR System Delete — Throttle valve delete plate + EGR cooler delete components in one kit CNC-Machined Billet 6061-T6 Aluminum — Precision-engineered for perfect fit and long-term durability Eliminates Carbon Buildup — No more exhaust soot fouling your intake manifold, valves, and engine oil Reduced EGTs — Cooler exhaust gas temperatures for safer, more reliable operation under load Improved Turbo Response — Clean, unrestricted intake airflow for faster turbo spool Prevents EGR Cooler Failure — Eliminate the risk of internal coolant leaks causing hydrolock or head gasket damage Includes All Hardware — Gaskets, O-rings, bolts, and mounting hardware included Compatibility Year Make Model Engine 2010 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2011 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2012 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2013 Ram 2500 / 3500 6.7L Cummins Turbo Diesel 2014 Ram 2500 / 3500 6.7L Cummins Turbo Diesel Technical Specifications Specification Detail Material CNC-Machined Billet 6061-T6 Aluminum Finish Corrosion-Resistant Coating Application Off-Road / Competition Use Only Installation Professional Installation Recommended Tuning Required Yes — Custom ECU Tune Required to Disable EGR DTCs ⚠️ Important Legal Notice OFF-ROAD / COMPETITION USE ONLY. This EGR delete kit is intended exclusively for off-road and closed-course competition vehicles. It is NOT street-legal and does NOT comply with EPA or CARB emissions regulations. The purchaser assumes all responsibility for compliance with applicable laws. Frequently Asked Questions Q: What does this EGR delete kit include?A: This kit includes the EGR throttle valve delete plate, EGR cooler delete components, all necessary gaskets, O-rings, bolts, and mounting hardware for a complete installation. Q: Will this trigger a check engine light?A: Yes. The ECU will detect the missing EGR components and set diagnostic trouble codes. Custom ECU tuning is required to disable EGR-related DTCs and prevent limp mode. This kit is hardware only. Q: Is this legal for street use?A: OFF-ROAD / COMPETITION USE ONLY. EGR delete modifications are not EPA or CARB compliant and are not legal for on-road vehicles. Q: What are the benefits of EGR delete on a 6.7L Cummins?A: On off-road/competition vehicles, deleting the EGR system eliminates carbon buildup in the intake manifold, reduces soot contamination in engine oil, lowers EGTs, improves turbo response, and removes the risk of EGR cooler failure. Q: Do I need to remove the DPF as well?A: The EGR and DPF systems work together. For optimal results on competition vehicles, removing both systems with proper ECU tuning is recommended. However, this kit addresses the EGR system specifically. Q: What material is used?A: All delete components are CNC-machined from billet 6061-T6 aluminum with a corrosion-resistant finish, engineered to withstand the high-temperature environment of the 6.7L Cummins engine bay. Q: Does this fit my 2010-2014 Ram 2500/3500?A: Yes. This kit is designed for all 2010, 2011, 2012, 2013, and 2014 Ram 2500 and 3500 trucks equipped with the 6.7L Cummins turbo diesel engine. Why Choose iFJF? iFJF is your trusted source for diesel performance aftermarket parts. All our products are precision-engineered using premium materials and backed by responsive US-based customer support. From Cummins to Powerstroke to Duramax, we deliver the parts that keep your diesel running at its best. You May Also Need EGR Throttle Valve & Cooler Delete Kit — 2010-2014 Ram 6.7L EGR Valve Delete Kit for 2007-2018 Ram 6.7L Cummins 3.5" High Flow Intake Manifold Elbow for 2007-2018 Ram 6.7L ⚠️ Off-Road / Competition Use Only: This product is intended for off-road or competition vehicles only. Not legal for highway use on emissions-controlled vehicles in the US and many other jurisdictions. Check local and federal regulations before purchasing. Removal of emissions equipment may void your vehicle warranty. 🔗 Cummins Diesel Resources & Maintenance 📖 Related Guides: Ram 6.7L Cummins Fuel Filter Replacement: Complete DIY Guide (2013–2018) Diesel Fuel Filter Maintenance — When to Replace (Duramax, Powerstroke & Cummins) 🔍 Shop All Cummins Parts → | EGR Delete Parts → | Fuel Filters →

Read more less

OEM-Spec Fuel Tank Selector Valve for 1989-1997 Ford F-Series The iFJF FTSV-9B263 Fuel Pump Reservoir Tank Selector Valve is a premium OEM-specification replacement for Ford part number F1UZ9B263B. Designed for 1989-1997 Ford F-150, F-250, and F-350 trucks equipped with dual fuel tanks, this selector valve restores proper fuel tank switching functionality and resolves the most frustrating dual-tank system problems. If your truck refuses to switch between front and rear tanks, your fuel gauge reads incorrectly, or you've experienced the dreaded cross-flow issue where fuel mysteriously transfers between tanks, this direct-fit replacement is the solution you need. Understanding the Ford Dual Tank System Ford's dual tank system on 1989-1997 F-Series trucks uses a frame-mounted selector valve and fuel reservoir assembly to manage fuel delivery from two separate tanks. When you press the tank selector switch on the dashboard, the valve redirects both the fuel supply and fuel return lines, while simultaneously switching the fuel gauge reading to the selected tank. The integrated reservoir acts as a fuel accumulator, ensuring consistent fuel delivery to the engine regardless of fuel slosh or momentary pump cavitation. Over time, the valve's internal diaphragms deteriorate, the switching motor fails, or electrical contacts corrode, resulting in the common dual-tank issues these trucks are known for. Vehicle Compatibility Make Model Years Engine Options Ford F-150 1989-1997 4.9L I6 / 5.0L 302 V8 / 5.8L 351W V8 Ford F-250 1989-1997 5.0L 302 V8 / 5.8L 351W V8 / 7.5L 460 V8 Ford F-350 1989-1997 5.8L 351W V8 / 7.5L 460 V8 / 7.3L Diesel Technical Specifications Specification Detail OEM Part Number F1UZ9B263B Function Fuel Tank Selector & Pump Reservoir Fuel Compatibility Gasoline, Diesel, Ethanol Blends up to E15 Ports 4-Port (Supply In/Out, Return In/Out) + Electrical Connector Mounting Location Frame Rail (Driver Side) Electrical Connector Factory Ford 6-Pin Weather-Sealed Connector Operating Pressure Up to 100 PSI Housing Material Corrosion-Resistant Aluminum / Steel SKU FTSV-9B263 Common Failure Symptoms Cannot switch tanks: The selector switch on the dash does nothing, or there is a long delay before the switch occurs Incorrect fuel gauge reading: The gauge reads empty or full regardless of actual fuel level, or reads the wrong tank Fuel transfer between tanks: One tank overfills while the other empties without being used (cross-flow through a stuck internal valve) Engine stalling after tank switch: The engine momentarily loses fuel pressure during the switching process Check engine light: Fuel system-related diagnostic codes, especially on OBD-II equipped 1996-1997 models Fuel pump running continuously: The pump never shuts off, indicating a pressure regulation issue within the reservoir Frequently Asked Questions Q: What are the symptoms of a failing fuel tank selector valve?A: Common symptoms include inability to switch between tanks, fuel gauge reading incorrectly or not at all, engine stalling after switching tanks, fuel transferring from one tank to the other (overfilling one tank), and fuel pump running continuously. These issues often begin intermittently before becoming permanent. Q: Which Ford trucks use this selector valve?A: This F1UZ9B263B selector valve fits 1989-1997 Ford F-150, F-250, and F-350 trucks with dual fuel tank configurations and a frame-mounted fuel reservoir/selector assembly. It is compatible with both gasoline and diesel engine models. Q: Is this a direct OEM replacement?A: Yes, the iFJF FTSV-9B263 is designed as a direct OEM-specification replacement for Ford part number F1UZ9B263B. It features identical mounting points, electrical connectors, and fuel line connections for a true plug-and-play installation. Q: How difficult is the installation?A: Installation is moderately challenging and typically takes 1-2 hours. The selector valve is frame-mounted near the fuel tanks. You'll need to relieve fuel system pressure, disconnect fuel lines and the electrical connector, unbolt the old valve, and install the new one. Basic mechanical skills and hand tools are required. Q: Do I need to replace the fuel pump reservoir at the same time?A: While not always necessary, it is common practice to replace the fuel pump reservoir assembly along with the selector valve, especially if both components have similar mileage. The reservoir and selector work together, and failure of one often indicates the other is approaching end of life. Q: What causes these selector valves to fail?A: Selector valve failure is typically caused by internal diaphragm deterioration from age and fuel exposure, electrical contact corrosion in the selector motor, or debris in the fuel system jamming the internal switching mechanism. Twenty-plus years of ethanol-blended fuel exposure accelerates wear on internal seals and diaphragms. Q: Will this fix my fuel gauge issue?A: If your fuel gauge issue is related to the selector valve (incorrect tank reading after switching, gauge dead on one tank only), then yes. However, if the sending unit inside the fuel tank itself has failed, the selector valve replacement alone will not fix it - you would need a fuel pump and sending unit assembly for that specific tank. Related Products iFJF Ford F150-F350 EGR Simulator Eliminator Kit iFJF Ford F150-F250 V8 EGR Delete with Exhaust Header Kit iFJF Dodge Ram Cummins 5.9L / 6.7L Diesel Oil Filter Blog Resources Fuel System Troubleshooting & Repair Guides iFJF Product Updates & Installation Tips

Read more less

Product Overview Maintain your outdoor power equipment with the AR42118 Pressure Washer Unloader Pump Valve Rebuild Kit. This genuine-quality replacement part ensures your equipment runs at peak performance. Easy to install and built to last at just $21.99. Key Features Genuine-Quality Replacement: Designed to match OEM specifications for perfect fit Durable Materials: Built to handle outdoor power equipment demands Quick Installation: Direct replacement with minimal tools required Rigorously Tested: Quality-checked to ensure reliable performance Specifications Specification Value Brand iFJF Condition New Warranty 1-Year Limited Warranty Part Numbers AR42118 Why Choose iFJF OEM-Quality Standards: Every iFJF product is manufactured to meet or exceed OEM specifications for fit, durability, and performance. Rigorous Quality Control: Each component undergoes thorough inspection before shipping to ensure you receive a flawless product. Direct Savings: By selling factory-direct, we eliminate middleman markups — passing significant savings to you compared to dealership pricing. US-Based Support: Our customer service team is ready to help with fitment questions, installation guidance, and order support. Installation Tips Quick Replacement: Remove the old part, clean the mounting surface, and install the new component. Most replacements take 15-30 minutes with basic hand tools. Safety First: Always disconnect spark plug wires before servicing power equipment. Wear safety glasses and work gloves during installation. Frequently Asked Questions Q: Will this fit my equipment?A: Please verify your model number. This part is specifically designed for AR42118 Pressure Washer Unloader Pump Va. Cross-reference your existing part number with the specifications listed above. Q: Is professional installation required?A: No, this is designed as a DIY-friendly replacement. Most users complete installation in 15-30 minutes with basic hand tools. Detailed instructions are included. Q: What warranty comes with this part?A: All iFJF parts come with a 1-year limited warranty against manufacturing defects. Contact our support team with your order number for any warranty inquiries.

Read more less

Product Overview Upgrade your 2008-2010 Ford 6.4L Powerstroke with this EGR Valve & Cooler Delete Kit from iFJF — engineered to eliminate the problematic factory EGR system on your F-250, F-350, or F-450 Super Duty. The 6.4L Powerstroke is notorious for EGR cooler failures that can lead to coolant loss, engine overheating, and catastrophic head gasket damage. This complete delete kit replaces the failure-prone EGR components with durable stainless steel block-off plates and a delete pipe, restoring reliability to your diesel engine. Why Delete the EGR on Your 6.4L Powerstroke? The factory EGR (Exhaust Gas Recirculation) system on the 6.4L Powerstroke recirculates hot exhaust gas and soot back into the intake manifold, causing carbon buildup, reduced performance, and elevated EGTs (exhaust gas temperatures). The EGR cooler is especially problematic — when it fails internally, coolant enters the combustion chamber, potentially causing hydrolock and complete engine failure. By deleting the EGR system, you eliminate these failure points entirely. Key Features Complete EGR System Removal — Includes EGR valve block-off plates and EGR cooler delete pipe for full system elimination 304 Stainless Steel Construction — Corrosion-resistant material engineered to withstand extreme exhaust gas temperatures up to 1,200°F Eliminates EGR Cooler Failure Risk — No more coolant loss, overheating, or head gasket damage from failed EGR coolers Reduced Carbon Buildup — No more exhaust soot being recirculated into your intake manifold, valves, and combustion chambers Improved Throttle Response — Cleaner intake air means faster turbo spool and better engine responsiveness Lower EGTs — Reduced exhaust gas temperatures for safer, more reliable engine operation under load and towing Direct Bolt-On Design — Engineered for straightforward installation (professional installation recommended) Compatibility Table Year Make Model Engine 2008 Ford F-250 / F-350 / F-450 / F-550 Super Duty 6.4L Powerstroke V8 Diesel 2009 Ford F-250 / F-350 / F-450 / F-550 Super Duty 6.4L Powerstroke V8 Diesel 2010 Ford F-250 / F-350 / F-450 / F-550 Super Duty 6.4L Powerstroke V8 Diesel Technical Specifications Specification Detail Material 304 Stainless Steel Application Off-Road / Competition Use Only Fitment 2008-2010 Ford 6.4L Powerstroke Installation Professional Installation Recommended Tuning Required Yes — ECU Tune Required to Disable EGR DTCs Includes Block-Off Plates, Delete Pipe, Gaskets, Bolts Installation Notes The EGR system on the 6.4L Powerstroke is integrated into the exhaust and intake plumbing. Removal requires mechanical expertise and proper tools. Key steps include: removing the intake manifold, disconnecting EGR cooler coolant lines (drain coolant first), removing the EGR valve and cooler assembly, and installing the delete components with new gaskets. Custom ECU tuning MUST be applied to disable EGR-related diagnostic trouble codes and prevent the engine from entering limp mode. ⚠️ Important Legal Notice OFF-ROAD / COMPETITION USE ONLY. This EGR delete kit is designed and sold solely for off-road and closed-course competition vehicles. It is NOT legal for use on public highways or on-road vehicles in the United States under the federal Clean Air Act and EPA regulations. It is the purchaser's responsibility to comply with all applicable federal, state, and local laws. Frequently Asked Questions Q: What's included in this EGR delete kit?A: This kit includes the EGR valve block-off plates, EGR cooler delete pipe, all necessary gaskets, bolts, and hardware for a complete installation on 2008-2010 Ford 6.4L Powerstroke engines. Q: Will this trigger a check engine light (CEL)?A: Yes. Removing the EGR system will set diagnostic trouble codes (DTCs). ECU tuning is required to disable EGR-related DTCs and prevent limp mode. This kit provides the hardware only — tuning is sold separately. Q: Is EGR delete legal for on-road use?A: OFF-ROAD / COMPETITION USE ONLY. EGR delete kits are not legal for on-road vehicles in the United States under EPA and CARB regulations. Please verify your local laws before purchase. Q: What material is this kit made from?A: All block-off plates and delete pipes are constructed from 304 stainless steel for maximum corrosion resistance and durability under extreme exhaust temperatures. Q: Do I need professional installation?A: Professional installation is highly recommended. Removing the EGR system requires mechanical expertise, proper tools, and ECU tuning capability. Installation instructions are not included. Q: What are the benefits of deleting the EGR system?A: On competition/off-road vehicles, removing EGR reduces carbon buildup in the intake, lowers EGTs, improves throttle response, and eliminates the risk of EGR cooler failure that can lead to catastrophic coolant loss. Q: Does this fit all 2008-2010 6.4L Powerstroke models?A: Yes. This kit fits 2008, 2009, and 2010 Ford F-250, F-350, F-450, and F-550 Super Duty trucks equipped with the 6.4L Powerstroke V8 diesel engine. Why Choose iFJF? At iFJF, we specialize in diesel performance parts for the North American aftermarket. Every product is precision-engineered to meet or exceed OEM specifications. We stand behind our quality with responsive customer support and fast shipping from our US warehouses. Thousands of diesel owners trust iFJF for their Powerstroke, Cummins, and Duramax builds. You May Also Need 6.4L Powerstroke 4" Cat & DPF Delete Pipe & EGR Kit — Complete emissions delete package 6.4L Powerstroke 4" Cat & DPF Delete Pipe — DPF/CAT removal for 2008-2010 Coolant Filtration Kit for Ford 6.0L/6.4L Powerstroke — Protect your cooling system

Read more less

Product Overview The iFJF Valve is a premium aftermarket replacement part engineered for precision fit and lasting durability. Designed to match or exceed OEM specifications, this valve delivers reliable performance for your vehicle. Replaces OEM Part Numbers: RP50587 Brand: iFJF Condition: Brand New, Aftermarket Compatibility & Fitment Vehicle Make Model Year Range Engine This product fits multiple applications. Please verify fitment with your vehicle specifications. Technical Specifications Specification Detail Part Type Valve Brand iFJF Replaces OEM RP50587 Condition New Aftermarket Material High-Grade Steel / Aluminum / Composite Finish Corrosion-Resistant Coating Fitment Type Direct Replacement Key Features & Benefits Precision Engineering: Manufactured to exact tolerances for seamless fit and function OEM-Equivalent Performance: Meets or exceeds factory specifications for reliable operation Durable Construction: Built with high-quality materials to withstand demanding conditions Easy Installation: Direct bolt-on replacement — no modifications required Corrosion Resistant: Protective coating prevents rust and extends service life Cost-Effective: Premium quality at a fraction of OEM dealer pricing Thoroughly Tested: Each unit undergoes quality inspection before shipment Installation Guide Verify this valve matches your vehicle make, model, and year Gather necessary tools: socket set, wrenches, torque wrench, safety equipment Park vehicle on level surface and engage parking brake Remove the old/damaged component carefully, noting orientation Clean mounting surface and inspect surrounding components for wear Install the new iFJF Valve in the same orientation Torque all fasteners to manufacturer specifications Test operation before returning vehicle to service ⚠️ Professional installation recommended for safety-critical components. Always consult your vehicle service manual for torque specs. Frequently Asked Questions Q: Is this valve compatible with my vehicle? A: Please verify your vehicle's make, model, year, and engine against our compatibility table above. For specific fitment questions, contact us with your VIN number. Q: Does this replace OEM part numbers RP50587? A: Yes, this valve is designed as a direct replacement for RP50587. It meets or exceeds factory specifications. Q: What's included in the package? A: Each package includes the Valve assembly as shown. Installation hardware is included where applicable. Please check product images for complete contents. Q: Do you offer a warranty? A: Yes! All iFJF products come with a satisfaction guarantee. If you experience any issues, contact our customer service team for a replacement or refund. Q: How long does shipping take? A: Orders are processed within 1-2 business days. Standard shipping to the contiguous US takes 3-7 business days. Expedited options available at checkout. Related Products Looking for more? Check out these related products from iFJF: iFJF RP46074 Cartridge For 1300 1400 Tub/Shower Valve Single Lever New Helpful Articles iFJF Blog — Installation Tips, Maintenance Guides & Product Updates How to Choose the Right Aftermarket Parts for Your Vehicle

Read more less

Overview Restore your Symmons Temptrol shower to full functionality with the iFJF Stem Cartridge Control Spindle. Precision-engineered as a direct replacement for the Symmons TA-10 pressure-balancing mixing valve, this solid brass cartridge spindle restores smooth temperature control and eliminates stubborn drips and leaks that waste water and drive up utility bills. Rather than replacing an entire shower valve assembly — which can cost $300+ in plumber labor alone — this affordable spindle replacement gets your shower working like new in under 30 minutes with basic hand tools. No wall demolition, no soldering, no special skills required. The Symmons TA-10 is one of the most common shower valves in North American homes and commercial buildings, and spindle wear is the #1 cause of temperature control issues and leaks. Key Features Direct Fit Replacement — Compatible with all Symmons TA-10 Temptrol pressure-balancing shower mixing valves dating back to the 1960s Solid Brass Construction — Machined from durable brass for long service life, resisting corrosion and mineral buildup even in hard water conditions Smooth Temperature Control — Restores precise hot/cold water mixing for comfortable, consistent shower temperature without sudden scalding or cold bursts Stops Drips & Leaks — Worn spindles are the #1 cause of showerhead drips; this replacement seals tight and eliminates water waste DIY-Friendly Installation — Replace in 20-30 minutes with basic tools; no soldering, pipe cutting, or wall access required Cost-Effective — A fraction of the cost of professional valve replacement or plumber service calls Technical Specifications Specification Details Compatible Model Symmons TA-10 Temptrol Mixing Valve Material Solid Brass Valve Type Pressure-Balancing Mixing Valve Spindle Function Temperature Control / Flow Regulation Installation Time 20-30 Minutes (DIY) Tools Required Adjustable Wrench, Phillips Screwdriver, Plumber's Grease (recommended) Compatibility Symmons Model Compatibility TA-10 Temptrol ✅ Direct Fit — Exact Replacement Temptrol Series (All Variants) ✅ Compatible — Verify stem length before ordering ⚠️ Important: The Symmons Temptrol line spans decades of production. While the TA-10 spindle fits most models, please check your valve model number (typically stamped on the escutcheon plate behind the handle) before ordering. Installation Guide Shut Off Water — Turn off water supply to the shower valve at the main or fixture shutoff Remove Handle & Trim — Unscrew the handle set screw and remove the escutcheon plate Extract Old Spindle — Use a deep socket or adjustable wrench to unscrew the old spindle from the valve body Clean Valve Body — Remove any debris or mineral deposits from the valve seat before installing new spindle Install New Spindle — Apply silicone plumber's grease to O-rings, thread in by hand, then snug with wrench — do not overtighten Reassemble & Test — Reattach trim and handle, restore water, test temperature control, check for leaks Why Replace Your Symmons Spindle? Common Symptoms of a Worn Spindle: (1) Water dripping from the showerhead when handle is fully off, (2) Difficulty adjusting temperature — too hot or too cold with a narrow sweet spot, (3) Handle feels loose, wobbly, or gritty when turning, (4) Water leaking from behind the handle or escutcheon plate. Water Savings: A showerhead dripping at just one drop per second wastes over 3,000 gallons per year. Replacing a worn spindle pays for itself in water savings within the first month. Prevent Scalding: A failing spindle can cause sudden temperature fluctuations — a serious safety hazard, especially in homes with children or elderly residents. FAQ Q: How do I know if I need a new stem cartridge spindle?A: Common symptoms include water dripping from the showerhead when fully off, difficulty adjusting temperature, handle feeling loose/wobbly/gritty when turning, and water leaking from behind the handle or escutcheon plate. Q: Will this fit my old Symmons valve from the 1980s?A: Symmons TA-10 valves have been in production since the 1960s with relatively consistent internal dimensions. In most cases, this spindle fits older TA-10 models. Check the stamp on the trim plate for "TA-10" to confirm compatibility. Q: Do I need plumber's grease or pipe dope for installation?A: We recommend applying a thin layer of silicone-based plumber's grease to the O-rings and threads before installation. This ensures smooth operation and prevents binding. Do NOT use petroleum-based grease as it can degrade rubber seals. Q: Can I install this without removing the entire valve from the wall?A: Yes! The stem spindle is accessible from the front after removing the handle and trim plate — no wall access or valve body removal is needed. Symmons valves are designed for front-service cartridge replacement. Q: Will this fix a shower that won't get hot enough?A: If the issue is caused by a worn spindle failing to properly mix hot and cold water, yes — replacing the spindle should restore full temperature range. If the problem persists, check your water heater thermostat setting or the pressure-balancing spool (a separate component). Q: Is this an OEM Symmons part or aftermarket?A: This is a high-quality aftermarket replacement manufactured to Symmons TA-10 specifications. Precision-machined to the same dimensions from the same-grade brass for reliable fit and function. Q: How long should a Symmons spindle last?A: With normal use, a quality brass spindle should last 8-15 years. Hard water (high mineral content) can shorten lifespan to 5-8 years. Consider a whole-house water softener if replacing frequently. Q: What's the difference between a spindle, cartridge, and stem?A: In Symmons TA-10 valves, these terms are used interchangeably for the internal brass component that controls water mixing and flow. This part replaces the entire internal control mechanism. 📚 Related Guides & Articles iFJF Guides & Resources — Expert Tips, Installation Tutorials & Buying Guides

Read more less

Product Overview The iFJF Valve Cover is a premium aftermarket replacement part delivering OEM-equivalent performance at a competitive price.. Key Takeaways ✅ Quality: Premium aftermarket — meets/exceeds OEM specifications ✅ Installation: Direct bolt-on replacement — no modifications needed ✅ Value: Significant savings vs. OEM dealer pricing ✅ Warranty: Satisfaction guaranteed — replacement or refund Compatibility & Fitment Please verify fitment with your vehicle before ordering. Contact us with your VIN for confirmation. Make Model Year Range Engine Notes Universal fit — verify dimensions match your application. Contact us with measurements for confirmation. Key Features & Benefits Precision Engineering: Manufactured to exact OEM tolerances for guaranteed fit and function — no modifications, no guesswork. High-Quality Materials: Constructed from premium-grade materials with corrosion-resistant finish for long service life in demanding conditions. OEM-Equivalent Performance: Designed to match or exceed factory specifications — reliable operation you can count on mile after mile. Easy Installation: Direct bolt-on replacement. Most installations completed in under an hour with basic hand tools. Cost-Effective Solution: Premium quality at a fraction of OEM dealer pricing — save 40-70% vs. dealership parts counter. Quality Tested: Every unit undergoes rigorous quality control inspection before packaging and shipment. Corrosion Resistant: Protective coating prevents rust and oxidation, extending service life even in harsh environments. Technical Specifications Specification Detail Product Type Valve Cover Brand iFJF Condition New — Aftermarket Engine LS1, LS6, LS2 Fitment Type Direct Replacement / Bolt-On Material High-Grade Steel / Aluminum / Composite (varies by application) Finish Corrosion-Resistant Coating Package Contents 1x Valve Cover Assembly (mounting hardware included where applicable) Warranty Satisfaction Guarantee — Replacement or Refund Installation Guide Verify Compatibility: Confirm this valve cover matches your vehicle year, make, model, and engine using the compatibility table above. Gather Tools: Typical tools needed — socket set, wrenches, torque wrench, screwdrivers, safety glasses, and gloves. Safety First: Park on level ground, engage parking brake, disconnect battery if working near electrical components. Remove Old Part: Carefully remove the old/damaged component. Note orientation and fastener locations. Clean & Inspect: Clean the mounting surface thoroughly. Inspect surrounding components for wear or damage. Install New Valve Cover: Position the new iFJF valve cover and secure all fasteners hand-tight first, then torque to specification. Final Check: Double-check all connections and clearances. Test operation before returning vehicle to service. ⚠️ Professional installation is recommended for safety-critical components. Always consult your vehicle service manual for proper torque specifications. Why Choose iFJF? iFJF Direct is your trusted source for premium aftermarket automotive, RV, marine, and appliance replacement parts. We combine OEM-quality engineering with competitive pricing — no compromises. ✓ Quality You Can Trust: Every product undergoes thorough inspection before shipment ✓ Fast Shipping: Orders ship within 1-2 business days from our US warehouse ✓ Expert Support: Our product specialists are ready to help with fitment questions ✓ Satisfaction Guaranteed: Easy returns and exchanges — shop with confidence Frequently Asked Questions ❓ Is this an OEM or aftermarket part? This is a premium aftermarket valve cover manufactured by iFJF. It is engineered to match or exceed OEM specifications, providing reliable performance at a fraction of dealer pricing. ❓ Is professional installation required? Installation difficulty varies by vehicle. Many DIY enthusiasts can install this valve cover with basic hand tools. We recommend consulting your vehicle's service manual for torque specifications and installation procedures. Professional installation is advised if you're not comfortable with automotive repair. ❓ What warranty is included? All iFJF products come with a satisfaction guarantee. If you experience any defects or issues, contact our customer service team for a replacement or full refund. We stand behind every product we sell. ❓ How fast is shipping? Orders are processed within 1-2 business days. Standard shipping to the contiguous United States takes 3-7 business days. Expedited shipping options are available at checkout for faster delivery. ❓ What's included in the package? Each package includes the Valve Cover as shown in the product images. All necessary components for installation are included. Please refer to the product images for exact contents. ❓ What is your return policy? We accept returns within 30 days of delivery. Items must be in new, unused condition with original packaging. Contact our support team to initiate a return — we make it easy and hassle-free. Related Products Complete your repair with these related products from iFJF: 🔗 iFJF Valve Cover and Lift Valve Assembly 905-212 Replacement for 1 "An Helpful Resources 📖 iFJF Blog — Installation Guides, Maintenance Tips & Product Spotlights 🔧 How to Choose the Right Aftermarket Replacement Parts 📦 Contact Our Support Team for Fitment Questions

Read more less

Product Overview The iFJF EGR Valve Delete Kit is a comprehensive solution for 2008-2010 Ford Super Duty trucks with the 6.4L Powerstroke diesel engine. This kit includes a CNC-machined billet aluminum intake elbow plus complete EGR cooler block-off plates — addressing the #1 reliability concern of the 6.4L platform. ⚠️ For off-road and competition use only. Tuning required. Key Features Complete Kit — Includes billet aluminum intake elbow, EGR cooler block-off plates (both banks), high-temperature gaskets, O-rings, and Grade 8 hardware. No piecing together parts from multiple vendors. CNC Billet Intake Elbow — Replaces the restrictive, failure-prone factory EGR elbow. Smooth internal flow path improves airflow. Anodized finish for corrosion resistance. Eliminates EGR Cooler Failure Risk — The 6.4L EGR coolers are known to crack internally, causing coolant loss and potential hydrolock. This kit removes that failure mode entirely. Lower EGTs — Without hot exhaust gas being recirculated into the intake, exhaust gas temperatures drop 100-200°F — critical for towing reliability. Improved Turbo Response — Cleaner, cooler intake air means denser charge and faster turbo spool. Noticeable improvement in throttle response. Compatibility Vehicle Engine Years Ford F250 Super Duty 6.4L Powerstroke V8 Diesel 2008-2010 Ford F350 Super Duty 6.4L Powerstroke V8 Diesel 2008-2010 Ford F450 Super Duty 6.4L Powerstroke V8 Diesel 2008-2010 Ford F550 Super Duty 6.4L Powerstroke V8 Diesel 2008-2010 Specifications Spec Value Brand iFJF Material (Elbow) 6061-T6 Billet Aluminum Material (Plates) 304 Stainless Steel Finish Black Anodized Gaskets Multi-Layer Steel (MLS) Tuning Required Yes (EGR DTC Disable) Use Off-Road / Competition Only Why Choose iFJF The 6.4L Powerstroke can be a great engine — once the EGR system is addressed. iFJF's kit uses billet aluminum and stainless steel components that will outlast the truck. Unlike cheaper kits with thin stamped plates and paper gaskets, our MLS gaskets and precision-machined elbow ensure a leak-free installation. Installation Instructions Disconnect batteries — Both batteries. Allow engine to cool completely. Remove intake piping — Air filter housing, intake tube, and charge air cooler pipes to access the EGR components. Remove factory EGR elbow — Unbolt from the intake manifold. This is the large cast aluminum piece on top of the engine. Remove EGR coolers — Both passenger-side and driver-side coolers must be removed. The passenger side is tight — removal of the inner fender liner helps access. Install block-off plates — Mount the stainless steel plates where the EGR coolers connected to the exhaust manifolds. Use MLS gaskets. Torque to factory spec. Install billet intake elbow — Position with new O-ring seal. Torque bolts evenly to 18 ft-lbs. Reinstall intake piping and tune — Reconnect all intake components. Flash ECU with EGR-disable tune before starting engine. Frequently Asked Questions Q: What's included in this 6.4 Powerstroke EGR delete kit?A: The kit includes a CNC-machined billet aluminum intake elbow (replaces the EGR-equipped factory elbow), block-off plates for both EGR coolers, all necessary gaskets, O-rings, and Grade 8 mounting hardware. Everything for a complete installation. Q: Why delete the EGR on a 6.4 Powerstroke?A: The 6.4L Powerstroke's EGR system is notorious for cooler failure, which can lead to coolant entering the cylinders (hydrolock). Deleting the EGR system eliminates this catastrophic failure risk and improves reliability. For off-road use only. Q: Is tuning required after EGR delete?A: Yes. The factory ECU will detect the missing EGR system and trigger a check engine light. You'll need an aftermarket tuner or custom tune to disable EGR-related DTCs and optimize performance. Q: Is this a complete kit or do I need additional parts?A: This is a complete EGR delete kit — intake elbow, cooler block-off plates, gaskets, and hardware. You may want to combine this with a DPF delete for maximum reliability gains (sold separately). Q: How long does installation take?A: Professional installation: 4-6 hours. Experienced DIY: 6-10 hours. The passenger-side EGR cooler is particularly tight on the 6.4L. Consider replacing the up-pipes while you have access. Related Products EGR Delete Kit for Ford F150 F250 Bronco EGR Delete for Ford Mustang 5.0L LB7 Injector Sleeve Cup for Duramax 6.6L

Read more less

R12T Nylon Water Collection Bowl for 120AT / S3240 Fuel Water Separator Product Overview The iFJF R12T clear nylon water collection bowl is a direct replacement for the drain bowl on Racor 120AT and S3240 series fuel water separators. Made from chemical-resistant transparent nylon, this bowl allows you to visually monitor water accumulation in your fuel system. The integrated drain valve at the bottom makes it easy to purge collected water without removing the bowl. Over time, original bowls can become cloudy, cracked, or develop leaks at the thread connection. This replacement restores full visibility and leak-free operation to your existing filter head. Compatible with all R12T, 120AT, and S3240 filter assemblies using the standard bowl thread pattern. Key Features Clear Nylon Construction: Chemical-resistant transparent material provides excellent visibility and durability — won't cloud from diesel or biodiesel exposure. Visual Water Detection: Transparent design lets you see water accumulation instantly without disassembly — critical for marine applications. Integrated Drain Valve: Easy-turn drain petcock at the bottom for quick water purging with no tools required. Direct OEM Replacement: Same thread pattern as Racor 120AT and S3240 filter bowls — screws right onto your existing filter head. Universal Fit: Works with any filter head using the standard 120AT bowl thread pattern. Specifications Specification Value Material Chemical-Resistant Clear Nylon Compatible Filter Series R12T, 120AT, S3240, Sierra 18-7947 Thread Type Standard 120AT Bowl Thread Drain Valve Integrated Nylon Petcock Frequently Asked Questions Q: Will this bowl fit my Racor filter?A: Yes, if your Racor unit is a 120AT or S3240 series. The thread pattern is a direct match — simply unscrew the old bowl and install this one. Q: How do I prevent leaks at the threads?A: Use fuel-rated (yellow) PTFE thread tape or a diesel-resistant thread sealant on the bowl threads. Standard white plumber's tape breaks down in diesel and can cause slow seepage. Q: Can I use this on a tractor or Kubota?A: Yes. Many owners use this bowl as part of a Kubota BX and similar tractor fuel-filter upgrade to replace a factory plastic filter that freezes or plugs. It fits any head using the standard 120AT bowl thread pattern. Q: How often should I drain the bowl?A: Check before every trip or weekly during heavy use. Drain whenever you see a visible water layer at the bottom. In humid marine environments, check more frequently. Q: Is this bowl compatible with biodiesel?A: Yes. The chemical-resistant nylon is compatible with standard diesel, biodiesel blends up to B20, and gasoline. Q: Does it come with an O-ring seal?A: The bowl threads directly onto the filter head. We recommend reusing your existing O-ring if it's in good condition, or purchasing a new seal kit if the old one shows wear. 📦 Related Products & Guides 🛒 This Bowl Fits: R12T Combo Kit ($29.99) — The complete fuel water separator system R12T Economy Combo ($22.99) — Budget complete kit R12T Replacement Filter Element ($17.99) — Spare 10-micron cartridge R12T Filter Base / Head ($17.99) — Need the aluminum head too? R12H Marine Aluminum Combo ($49.99) — Upgrade to marine-grade system 📖 Related Guides: R12T vs R12H: Real Customer Review (20K+ Views) R12T Installation Guide — Step-by-Step R12T Marine Installation: NPT & ZG Fittings Guide Best Water Separator Fuel Filter Buying Guide 2026

Read more less