Products

1.【Fitment】Suitable for replacing the original equipment electric choke on all 2 Barrel Mercruiser Mercarbs with 5.7L V-8 Engine.2.【Replaces Part Number】Mercury Marine Part # 70125A-1, Sierra Part # 18-7665.3.【Material】The resistance damper of marine carburetor is made of aluminum alloy material, which is corrosion resistant and durable.4.【Function】The marine electric choke thermostat can automatically adjust the mixture concentration according to the temperature and speed of the engine, so as to improve the starting performance of the engine.5.【Advantage】Replace original equipment electric choke on all, the overall operation performance is more stable.

Read more less

Fitment:Replacement for 7235,7236,7305,7511,7512 Check Valve Function: This baffle valve allows water to flow into the underground swimming pool, but prevents water from flowing backwards. The transparent cover can see the flow of water Material: The spring and pin are mainly made of stainless steel with tension, and the baffle is made of plastic, which is firm and not easy to crack; The O-ring is made of rubber, corrosion resistant, sealing and not easy to leak Include:7451 Flapper,7302 Spring,7304 Pin,7236 Cover and 1132 Cover o-Ring（Already assembled） Note: Please check whether it matches your model before purchasing（No installation instructions）

Read more less

Clutch Belt Change Spreader Tool for CanAm Maverick X3 Defender OE# 708200720 Item used for changing the belt on the Can-am X3 Models.  These are the after-market tools to help spread the secondary clutch and makes changing the belt a breeze.  Replace Part Numer #708200720 & 529000088 & 708200686.

Read more less

[Replacement for]---RV WF-8955 and 7155 Converter.[RV works again]---Its a converter charger from AC to DC used for travel trailers, only takes a very little time for your RV camper to get everything back to normal.[Install super easy]---The converter was easy to install, direct replacement for old Converter, only 5 wires to replace.[Package includes]---You will get a main board assembly replacement unit with product installation manual.According to the manual, you can easily conquer it.[Note]---Shut off all power before hooking it up.

Read more less

【Fitment】Fits 1/2 Inch to 1 Inch 720A. This Bonnet Repair Kit is compatible with 1 / 2-inch, 3 / 4-inch and 1-inch 720A Bonner Repair Kits. 【Material】Made of stainless steel, wear-resistant and prolong service life. 【Function】The 720A series pressure vacuum breaker assembly is designed for installation on potable water lines to protect against back-siphonage of contaminated water into the potable water supply. 【Advantages】Easy installation. 【Package included】Includes bonnet, canopy, and canopy screws.

Read more less

Fitment:This 720A Pressure Vacuum Circuit Breaker Service Kit is compatible with 1/2 inch, 3/4 inch, and 1 inch. Function: The 720A Series Pressure Vacuum Circuit Breaker Assembly is designed to be installed on the drinking water line to prevent the water stop from backsiphonage into the drinking water supply system. Unless the ball valve or valve body itself is broken, this pressure vacuum circuit breaker repair kit will repair most of the frozen 720A PVB. Material:This product is made of stainless steel, rubber and plastic, which is durable. Applicable Temperature Range: 33 ° F to 110 ° F. Package Included: o-ring,plastic washer,spring,poppet assembly,spider sssembly. This product does not contain instructions.

Read more less

Fitment: Replacement for pools and spas straight through flow OEM number: 7235 Function:It adopts a unique rotary design for backwater and inflow, with a transparent cover, which can see the water flow for easy inspection and debris removal Material: Mainly made of CPVC, corrosion resistant and not easy to damage Specification: 180 °, accept 1-1/2 inch to 2 inch PVC pipe, 125 gpm flow（No installation instructions）

Read more less

7305150 Switch for Water Softeners and Filtration SystemsPart # 7305150Water Softener Rotor Position SwitchIt is important to disconnect your appliance from the power supply before servicing.Commitment: If you are not satisfied with the received goods, you can return them for a refund, please rest assured to buy7305150 Water Softener Rotor Position Switch Compatible WS21X10003

Read more less

1.[Fitment]---Fit for mastertemp pool and spa heater.2.[Protection]---Bypass valve replacement kit maintains a constant flow to the heat exchanger by opening to allow excess flow to bypass the heat exchanger,energy saving and make the line more stable. 3.[Material]---Nylon wear-resistant and durable,at the same time, the surface of the product is coated, which is waterproof and rust-proof, and the integrated design is more difficult to break.4.[Installation]---First remove the wires connected to the manifold (be sure to remove the wires first, otherwise the wires will be easily torn off), screws and pipe buttons.Then get the manifold and remove its base plate and one layer of bulkheads to reveal the manifold bypass valve kit.After that, remove the old manifold bypass valve kit and install the new one.Finally, just follow the previous steps to install it back.5.[Notice]---Turn off the power supply and external gas valve before installation. Please confirm the size before purchasing.

Read more less

1.Fitment:This product is compatible with most filters with 13/16"-16 to 1 1/8"-16 threads.2.Replaces part number: Agco: Ag121853; Duramax Cat 1R-1807; Baldwin: B7225, B7700; Carquest: 84791; Caterpillar: 1R1807; Fleetguard: LF3973; Fram: Ph9376, Ph9376FP; Luber-finer: Lfp3236; Mack: 20539275, 2191P551807, 485GB3236; VMC: Lf551807; 478736, 85114049.3.Material:Made of 303 Stainless Steel, ensures high strength and longer life.4.Function:Remove the old adapter from your filter housing and replace it with the new one.5.Package includes:1 * Oil Filter Adapter. This product does not contain instructions

Read more less

Designed for use on 1993-1997 Aerostar or 1993-2006 Ranger and Explorer with 4.0L V6 engineThis installer works on crankshaft rear oil seals that come with or without a metal wear sleevePackage included: 1 x Seal installer,1 x Seal protector,1 x Seal adaper and 3 x boltsMade of heavy duty steel.Replace OTC 7834 and work in a easier way to save your time and moneyPerfectly install the sleeved seal, prevent damage to the seal and leakage.Note: there is a layer of oil stain on the surface of the product to protect it. Please use tools when taking it to avoid contaminating hands

Read more less

The Heavy Duty Steel Kit Replacement for 1998-2003 7.3L Diesel Engines in 3/4 and 1 Ton Trucks High-grade materials ensure quality performance over the lifetime of the tools Made of heavy duty steel.Replace 7835 and work in a easier way to save your time and money Complete 8-piece kit includes all the tools you need to correctly remove and install the rear main oil seal and wear ring on the crankshaft Perfectly install the sleeved seal, prevent damage to the seal and leakage.Note: there is a layer of oil stain on the surface of the product to protect it. Please use tools when taking it to avoid contaminating hands。Installation instructions are not included

Read more less

1.Carburetor Overhaul Rebuild Kit:Replaces Briggs & Stratton 796184,698787, 699900, 699521, 792369, 790032.Fits for Briggs & Stratton, Craftsman, and many more 11HP to 19HP Engines.2.Air Filter Fits:briggs & stratton 4211,4214,5077h,5077K,697014,697153,697634,698083,795115,797008,677014,695547,653202,286H77-0121,284H07,284H77,285H77,31E707,31E777,31F777,31G777,31H777,31P677.3.Air Filter Replaces:craftsman 33425, gy20573,m149171,z225.4.Air filter size:Length x Width x Height:9” x 3-3/16” x 1-1/2”.5.Package include:1 x Air filter,1 x Carburetor Overhaul Rebuild Kit (25 Kits in 1 package).

Read more less

Replacement part for Briggs & Stratton carburetor 799584. Fit: For most Briggs and Stratton 09P000 model 550EX, 675EX, 725EXI 140cc Engines. Used on Husqvarna LC 121P push lawnmower, Toro 550ex 140cc mower, Troy B110 lawn mower, Troy-Bilt TB110, 247372370 craftman. Function: To mix air and gasoline in the correct ratio, keep running for longer your Briggs & Stratton outdoor power equipment. Material: Plastic part with high quality. Package includes:1 x carburetor, 1 x o-ring, 2 x fuel pipe, 4 x clamps and 1 x filter.

Read more less

1.Fits part number:Briggs & Stratton 799727,794572,698620,791886,690194,499153, 498061,695412,793224,495935, 498051, 498059, 496796.2.The carburetor for 14hp,15hp,16hp,17hp,18hp Intek engines.3.High quality materials used,meets or exceeds OEM standards, 100% tested before shipping.4.Direct replacement for a proper fit and easy installation.5.The package: 1x Carburetor,Includes FREE Pad.

Read more less

Fits:800M4 0887715 887715 RK 800M4-FR-V1 Compatible: 1 inch 800QT Backflow Valve Made of high-quality materials, it helps quickly repair leaking gaskets or frozen damaged backflow Installation: Easy to install, without the need to remove the valve from the pipeline, internal parts can be disassembled, repaired, or inspected includes:1 x float vent disc assembly and 1 x bonnet O-ring.

Read more less

Fitment:Chrome Door Handle Keyhole Frame Cover Exteroir Driver Side for Titan 2004-2019 Armada 2004-2015. Part number:80647-ZC00A,80647-9FU0B. Function:This Door Handle Keyhole Frame Cover is a direct replacement with the same fit and finish manufactured,and will function and perform just as the original part. Material:This door handle cover is made of plastic and with chrome color,durable and great looking. Package Includes:1 x Door Handle Keyhole Frame Cover.

Read more less

Compatible with: Altima 2013-2018,Armada 2014-2015,Murano 2015-2021,Pathfinder 2013-2020,Titan 2014-2019,Titan XD 2015-2021. Cross reference:80670-3TA0D,80670-3TA0A, 80670-3TA0E, 80670-3TA0B. Location:Front or Rear Passenger Side Interior Door Handle,easy to install,includes door lock switch. Feature:it is a direct replacement for the factory handle,when it is defective you need to change new one. Made of durable plastic,chrome surface for long life. Package includes:1 x Right Interior Door Handle.

Read more less

Compatible with: Altima 2013-2018,Armada 2014-2015,Murano 2015-2021,Pathfinder 2013-2020,Titan 2014-2019,Titan XD 2015-2021. Cross reference:80671-3TA0D,80671-3TA0A, 80671-3TA0E, 80671-3TA0B. Location:Front or Rear Driver Side Interior Door Handle,easy to install,includes door lock switch. Feature:it is a direct replacement for the factory handle,when it is defective you need to change new one. Made of durable plastic,chrome surface for long life. Package includes:1 x Left Interior Door Handle.

Read more less

Compatible: Compatible with Thule profession bar, wing bar, Aero bar, Rhino heavy duty T-bolts and grooved nuts. Fitment: Fits for most roof racks, cargo cages and all awning size. Can be installed in the inverted or vertical position of Thule square bar and Rhino heavy bar. Material: Made of high quality steel with Zinc plated and black powder coated on the surface. High strength and hardness, anti-rust and long service life. Design: The bracket is designed with welded gusset plate to provide additional strength when mounting awing. Pre-drilled can be used two or three 8mm bolts, and three 6mm slotted holes for the installation of the awning. Package Include: Just one awning bracket. NOT include additional hardware. Part number: ZJ-813402 Fit type: Universal

Read more less

It replaces for Coats 8183061, 183061, 8182960, 182960, 8183060, 183060, 8182788, 182788.Please confirm the modelThis plastic head fits Coats Models 5030 5040 5050 5060 5065 6050 6060 6065 7050 7055 7060 7065 7660 7665 all base line models may fit others as wellThis head Fits for coats machines with a tapered hole on the end of the plunger shaft that the head attaches toThis is a set of 5 aftermarket replacement plastic mount demount heads are designed for Coats tire machine / changersPackage included: 5pcs Tire Machine/Changer Mount Head

Read more less

Fitment: Awnings for RVs and Campers include A&E 8500 Awnings A&E 9000 Awnings. Material: Made of high quality plastic with sturdy construction. Compared with metal material, It has less friction with the awning arms. Function: Support and stabilize the awning and keep the roof tensioned when opening. Installation: Insert the new Slider Catch through the hole in the main arm from the front. Place the spring between the back of the slider catch and the Main Arm Snap the back of the slider into the front piece. Include: 2 x slider catches, 2 x springs.

Read more less

1.Polyethylene2.Replacement for:Dometic and A&E 8500 and 9000 manual patio awnings.3.Handle gloves:Polyethylene material keeps the handle smooth, and the morphological design conforms to the bending of the fingers without slipping.4.Antirust:Vinyl-coated handles and painted surfaces prevent rust and corrosion.5.Easy installation: Appropriate handle length can achieve results even with little effort6.Includes: Carry handle, 3/16 inch popular rivet, hex nut

Read more less

Replacement for: most Awning of RVs and Campers, include Dometic and A&E 8500 and 9000 Awnings.Material: Made of steel-aluminum that maintain strength without rusting. The thick steel mandrel can fit through of the materials you are connecting.Handle Gloves: The polyethylene material on the handle can keep the handle smooth and no slipping. And the shape design conforms to the fingers.Easy to Install: Align previously drilled or drilled holes, apply pressure to the mandrel and secure the rivets in place, then thread the rivets through them.Package Include: 1 × Rafter rivet, 1 × Handle Lift.

Read more less