Description
PF9908 Fuel Filter and Pre-Screen — Two Parts, One Service (DD13 / DD15 / DD16)
Product Overview
PF9908 is a two-part fuel filter service for Detroit Diesel DD13 12.8L, DD15 14.8L and DD16 15.6L engines: one cartridge fuel filter element rated 10 Micron, one pre-screen, and the two O-rings that seal both. It replaces Detroit A4720900651 and cross-references FK13834, P551063, L5104F, KX2765, WF10103 and FF1227. Fits Freightliner 114SD, 112SD, Cascadia 113 / 125 / 132 and M2 112, plus Western Star 4700, 4800, 4900 and 5700XE, on pre-2020 builds.
Most listings for this number sell you the element and stop there. That is where the trouble starts: the pre-screen sits upstream of the element, and once it is loaded with debris the new element behind it chokes early — the truck pulls fine for a week, then falls on its face under load and everyone blames the filter. The PF9908 ships the pre-screen as a separate new part so both stages get changed in the same pass. If your last service left the old screen in the housing, the element you are about to fit is working behind a clog you cannot see.
What Is in the Box
| Component |
Qty |
What It Does on the Engine |
| Cartridge fuel filter element |
1 |
The 10 Micron element. This is the part that catches the fine debris and shears emulsified water out of the diesel before it reaches the injectors. |
| Pre-screen |
1 |
Sits upstream of the element and stops the coarse debris first. Reusing a loaded pre-screen is the usual reason a fresh element loads up early. |
| O-ring — housing |
1 |
Seals the housing lid. If it twists or sits proud of its groove, the housing will not hold prime. |
| O-ring — pre-screen seat |
1 |
Seals the pre-screen seat. A ring that is too thick or not seated lets fuel drain back to the tank after shutdown. |
Four parts, one box. Nothing in this assembly is designed to be reused — the element, the pre-screen and both rings are all service items.
Compatibility / Fitment
| Model |
Engine |
Years |
| Freightliner 114SD |
DD13 12.8L |
2013-2018 |
| Freightliner 112SD |
DD13 / DD15 / DD16 |
2013-2019 |
| Freightliner Cascadia 113 |
DD13 12.8L |
2013-2019 |
| Freightliner Cascadia 125 |
DD13 / DD15 / DD16 |
2013-2019 |
| Freightliner Cascadia 132 |
DD15 / DD16 |
2013-2016 |
| Freightliner M2 112 |
DD13 12.8L |
2013-2019 |
| Western Star 4700SB / 4700SF |
DD13 12.8L |
2013-2019 |
| Western Star 4800SB / 4800SF |
DD13 12.8L |
2013-2016 |
| Western Star 4900EX / 4900FA / 4900SA |
DD15 / DD16 |
2013-2017 |
| Western Star 5700XE |
DD13 / DD15 / DD16 |
2016-2017 |
Confirming your truck takes the PF9908
Model year alone is not a reliable test on these engines — a 2019 Cascadia can be either side of the changeover, which is exactly why some buyers end up with an element that will not seat. The reliable check takes thirty seconds:
- Pull the old element out of the housing and read the number printed on it.
- Match that number against the cross-reference list further down this page — not against the model year.
- If the printed number is not on the list, your housing takes a different element and the PF9908 is not your part.
Send us the number off the old element and the last eight digits of your engine serial and we will confirm before you order.
Specifications
| Part Number |
PF9908 |
| Service Type |
Cartridge element + pre-screen (two-part service) |
| Filtration Rating |
10 Micron |
| Water Separation |
99% |
| Media |
Double-layer microfiltration paper |
| Engines |
Detroit Diesel DD13 12.8L / DD15 14.8L / DD16 15.6L |
| Build Range |
Pre-2020 (roughly 2013-2019 model years) |
| Replaces |
A4720900651, A4720900451, A4720900551, FK13834, P551063, L5104F, KX2765, WF10103, FF1227 |
| Box Contents |
1 element + 1 pre-screen + 2 O-rings |
| Item Weight |
1 kg (2.2 lb) |
| Shipping Box |
11.3 x 5.16 x 4.92 in (28.7 x 13.1 x 12.5 cm) |
| Warranty |
iFJF Quality Guarantee |
Installation & Priming
The two failure modes buyers report on this number are both installation mistakes, not part defects: an O-ring that does not seat, and an element fitted behind an old pre-screen. Both are avoidable in the same service.
| Step |
What to Do — and Why |
| 1. Clean before you open the box |
Wipe out the housing and the lid. Grit left in the housing goes straight into the new element and shortens its life before the engine even starts. |
| 2. Change the pre-screen too |
The most skipped step on this engine. A new element sitting behind a loaded screen is why some fresh filters seem to fail within a few hundred miles. |
| 3. Lubricate both O-rings with clean diesel |
Two rings, two grooves — the housing lid and the pre-screen seat. Check each one sits flat and has not rolled. A twisted ring is the number-one cause of losing prime after the job. |
| 4. Prime before you crank |
Stroke the primer until you feel resistance build. If it never builds, stop and re-check the ring seating instead of pumping hundreds of times — pumping harder will not fix a ring that is out of its groove. |
| 5. Run and inspect |
Idle the engine, check the lid and the drain for seepage, then shut down and confirm the fuel level. Re-check for stored codes if the truck had a low-pressure warning before the service. |
Frequently Asked Questions
Q: What is the difference between the PF9908 element and the pre-screen?
A: The PF9908 kit contains two separate parts that do two different jobs. The cartridge fuel filter element is the 10 Micron part that does the fine filtration and separates water. The pre-screen is a coarse screen that sits upstream and stops larger debris before it reaches the element. Both are replaced in the same service, and both are in the box.
Q: Why does my truck lose prime or fail to start after a fuel filter change?
A: Loss of prime after a PF9908 service almost always traces back to an O-ring. There are two rings in this kit — one for the housing lid and one for the pre-screen seat. If either is twisted, seated in the wrong groove, or left out, the housing will not hold fuel pressure and the engine has to re-prime on every start. Lubricate both rings with clean diesel and confirm they sit flat before closing up.
Q: Which trucks and engines does the PF9908 fit?
A: The PF9908 fits Detroit Diesel DD13 12.8L, DD15 14.8L and DD16 15.6L engines on pre-2020 builds. That covers Freightliner 114SD, 112SD, Cascadia 113, Cascadia 125, Cascadia 132 and M2 112, plus Western Star 4700SB, 4700SF, 4800SB, 4800SF, 4900EX, 4900FA, 4900SA and 5700XE. Confirm by the number stamped on the old element rather than by model year.
Q: Is this a direct replacement for A4720900651?
A: Yes. The PF9908 replaces Detroit A4720900651, A4720900451 and A4720900551 directly, and cross-references FK13834, P551063, L5104F, KX2765, WF10103 and FF1227. Read the number off the element coming out of your housing and match it against the cross-reference list on this page before ordering.
Q: What micron rating and water separation does the PF9908 have?
A: The PF9908 element is rated 10 Micron and separates 99% of water from diesel fuel. The media is a double-layer microfiltration paper, so the same element handles particulate removal and water separation in one pass.
Q: Will this fit my 2019 or 2020 Cascadia?
A: It depends on the build, not the model year printed on the door. The PF9908 is the pre-2020 service part. Some 2019 Cascadia trucks sit on the earlier side of the changeover and take this element, others do not. Read the number stamped on the element you are removing — if it matches A4720900651 or one of the cross-references listed here, the PF9908 is correct for your truck.
⚠️ What Verified Buyers Complain About on Other PF9908 Kits
Every complaint below is a real review on a competing listing — none of them are about filtration performance
| What the Buyer Said |
The Actual Cause |
| "Missing small filter" · "missing an O-ring on the pre-filter" |
The listing shipped the element only. The PF9908 box carries the pre-screen and both rings as separate parts, so the service can actually be completed. |
| "The O-ring is too thick" · "fuel runs back and it loses prime" |
A ring that does not sit flat in its groove lets fuel drain back to the tank. Both rings in this kit are sized for the original grooves — lubricate them and check the seating before closing. |
| "I pumped the primer 2000 times before I realized" |
Priming cannot overcome a ring that is out of its groove. If resistance never builds after a reasonable number of strokes, stop and open the housing again. |
| "Doesn't fit my 2019 Cascadia" |
2019 is a changeover year on these engines. Read the number on the old element instead of trusting the model year — the cross-reference list on this page is the reliable test. |
Source: verified 1–3 star reviews on competing PF9908 listings for the same engine family.
📦 Related Products & Guides
🛒 Other filters for the same DD13 / DD15 / DD16 trucks:
📖 Read before you turn the first bolt:
Browse all fuel filters and diesel fuel filters.
🔄 PF9908 Cross Reference
Read the number off the element you are removing and find it in this table. That is the only reliable check — model year alone will not tell you which side of the 2020 changeover your truck sits on.
| Number on the Old Element |
What It Is |
Relation to PF9908 |
| iFJF PF9908 |
This product — element + pre-screen + 2 O-rings |
— |
| A4720900651 |
Detroit OEM number for this service point |
Direct replacement |
| A4720900451 |
Same family, earlier number |
Direct replacement |
| A4720900551 |
Same family, earlier number |
Direct replacement |
| FK13834 |
Fleetguard number for the same element |
Direct replacement |
| FK13850NN |
Related Fleetguard number, listed by some sellers |
Check against your housing |
| P551063 |
Cross-reference number |
Cross-reference |
| L5104F |
Cross-reference number |
Cross-reference |
| KX2765 |
Cross-reference number |
Cross-reference |
| WF10103 |
Cross-reference number |
Cross-reference |
| FF1227 |
Cross-reference number |
Cross-reference |
Number not on the list? Send it to us with your engine serial before ordering — a wrong element on these engines means a truck that will not prime, not just a return.