Products

CB Antenna Mount for Jeep Wrangler JL JLU — Front Driver Side Near Hood (2018-2022) Mount your CB or ham radio antenna securely on your 2018-2022 Jeep Wrangler JL or JLU with this purpose-built front driver side antenna bracket. This mount positions your antenna near the hood on the driver's side fender, providing optimal ground plane and signal performance while keeping the antenna within easy reach. No drilling required — the bracket uses existing factory mounting points for a clean, professional installation that doesn't compromise your Jeep's body integrity. Key Features No-Drill Installation: Uses existing factory bolt locations on the driver's side front fender — installs in 10-15 minutes with basic hand tools, no permanent modifications Optimal Antenna Placement: Front driver side location provides excellent ground plane for signal transmission/reception and keeps the antenna visible for trail communication Heavy-Duty Stainless Steel: 304 stainless steel construction with powder coat finish resists rust, corrosion, and trail abuse — won't flex under wind load at highway speeds Universal 3/8" Stud Mount: Standard 3/8 inch x 24 thread pattern fits virtually all CB and ham radio antennas (Firestik, Wilson, K40, President, Midland, Uniden) Complete Hardware Kit: Includes mount bracket, stainless steel bolts, washers, nylon lock nuts, and installation instructions Compatibility Year Make Model Notes 2018-2022 Jeep Wrangler JL (2-Door) All trim levels 2018-2022 Jeep Wrangler JLU (4-Door) All trim levels Not compatible with: JK models (2007-2018) — different fender bolt pattern. Gladiator JT — different cowl design, see our tailgate hinge mount instead. Why Choose This Mount? When you're on the trail or in a convoy, reliable communication is essential. This mount positions your antenna where it performs best — high on the front fender, away from body panels that can block signals, and in a location where you can easily monitor it from the driver's seat. The no-drill design preserves your Jeep's resale value, and the stainless steel construction means it'll still look great after years of sun, mud, and snow. Frequently Asked Questions Q: Will this fit a 2021 JLU Rubicon?A: Yes, this mount fits all 2018-2022 Wrangler JL and JLU models regardless of trim level (Sport, Sport S, Sahara, Rubicon, Willys, 4xe). The fender bolt pattern is identical across the JL platform. Q: Does it work with a 4-foot Firestik antenna?A: Yes, the standard 3/8 inch x 24 stud mount accepts Firestik, Wilson, and most CB antenna brands. For antennas taller than 4 feet, we recommend adding a spring base to reduce stress on the mount at highway speeds. Q: Does the antenna interfere with opening the hood?A: With a standard 3-4 foot antenna, the hood opens fully without interference. For longer antennas (5+ feet), the antenna will flex slightly but won't prevent hood access. Folding or quick-disconnect mounts are recommended if frequent hood access is needed. Q: Can I run the coax cable through the firewall?A: Yes, there's an existing rubber grommet on the driver's side firewall that you can route the coax through. The mount location is ideal for a clean coax run into the cabin without visible exterior wiring. Q: Will this work with a ham radio antenna (2m/70cm)?A: Yes, any antenna with a standard 3/8 inch x 24 thread or NMO adapter will fit. Ham radio operators commonly use this mount for dual-band antennas on overland and off-road builds. 📚 Related Guides & Articles Jeep Wrangler JK vs JL Parts Compatibility Guide Top 10 Jeep Wrangler Mods Under $50 Jeep Wrangler JK Common Problems & Fixes

Read more less

Tailgate Hinge CB Antenna & Flag Mounting Bracket for Jeep Wrangler JL JLU 2018-2021 This dual-purpose tailgate hinge mount gives you a solid, no-drill mounting point for both a CB antenna AND an off-road flag on your 2018-2021 Jeep Wrangler JL or JLU. The two-in-one design eliminates the need for separate mounts and keeps both accessories securely attached through the roughest trails. The bracket sandwiches between the factory tailgate hinge and body — no drilling, no cutting, fully reversible. Ideal for overland rigs, trail convoys, and dune-running where a whip flag is required. Key Features Two-in-One Design: Separate mounting holes for a CB/ham antenna (3/8 inch x 24 thread) AND an off-road flag/whip (1/2 inch hole) — run both simultaneously from one bracket No-Drill Installation: Mounts using the factory tailgate hinge bolts — simply remove the existing bolts, position the bracket, and reinstall with the included longer stainless hardware Heavy-Duty Stainless Steel: 3/16 inch thick 304 stainless steel with black powder coat finish — won't rust, won't flex, built for years of trail abuse Optimal Tailgate Location: Rear-corner mounting provides excellent ground plane for antenna performance and high visibility for off-road flags Complete Hardware Kit: Includes bracket, all mounting bolts, washers, nylon lock nuts, antenna stud adapter, and detailed installation guide Compatibility Year Make Model Notes 2018-2021 Jeep Wrangler JL (2-Door) Driver or passenger side tailgate hinge 2018-2021 Jeep Wrangler JLU (4-Door) Driver or passenger side tailgate hinge Not compatible with: JK models (2007-2018) — different hinge bolt pattern. Gladiator JT — different tailgate hinge design. Why This Mount? When you're running dunes or leading a trail convoy, you need both communication and visibility. This bracket solves both needs from a single mounting point. The tailgate hinge location is one of the strongest structural points on the JL body, and the no-drill design preserves your Jeep's integrity. Plus, having the antenna at the rear corner maximizes ground plane — a key factor in CB radio performance that many fender mounts compromise. Frequently Asked Questions Q: Will this fit a 2019 JLU Sahara?A: Yes, this mount fits all 2018-2021 Wrangler JL and JLU models regardless of trim level. The tailgate hinge bolt pattern is identical across the JL platform. Q: Can I mount it on either side of the tailgate?A: Yes, the bracket is designed to mount on either the driver or passenger side tailgate hinge. Most users prefer the passenger side to keep the antenna away from the fuel filler area. Q: Does the antenna interfere with opening the tailgate?A: The bracket moves with the tailgate when opened, so there's no interference. For very tall antennas (5+ feet), the antenna will swing with the tailgate — folding or quick-disconnect adapters are recommended for daily use. Q: Can I use this with oversized tires on the tailgate?A: The bracket mounts to the hinge, not the tailgate itself. It clears most tailgate-mounted spare tires up to 37 inches. For 40+ inch tires, verify clearance before ordering. Q: Does this work with aftermarket tailgate reinforcement kits?A: Most reinforcement kits that use the factory hinge bolts are compatible. If your reinforcement kit replaces the hinge bolts with its own hardware, you may need longer bolts (available at any hardware store) — contact us for bolt specs. 📚 Related Guides & Articles Jeep Wrangler JK vs JL Parts Compatibility Guide Top 10 Jeep Wrangler Mods Under $50 Jeep Wrangler JK Common Problems & Fixes

Read more less

Maximize Your Jeep's Interior Space The iFJF Mesh Top Roof Cargo Net transforms wasted ceiling space into functional overhead storage. Designed for Jeep Wrangler YJ, TJ, LJ, JK, JL, and Gladiator JT (1987–2021), this heavy-duty elastic mesh net secures jackets, blankets, camping gear, and everyday essentials above your head — keeping the cabin organized without sacrificing passenger comfort or legroom. Key Features High-Elasticity Mesh — Premium-grade 4-way stretch nylon mesh conforms to irregular cargo shapes while maintaining tension for a secure hold on pavement and off-road. Universal Wrangler Compatibility — Custom-fit design covers every Wrangler generation: YJ (1987–1995), TJ & LJ (1997–2006), JK 2-Door & 4-Door (2007–2018), JL 2-Door & 4-Door (2018–2021), and Gladiator JT (2020–2021). Quick Install & Secure Mounting — Heavy-duty adjustable straps with quick-release buckles attach to factory roll bars, sport bars, and hardtop mounting points in minutes. No drilling, no permanent modifications required. Durable All-Black Construction — UV-resistant black mesh and black hardware blend seamlessly with any interior color. Won't fade, sag, or stretch out over time. Off-Road Ready — Keeps gear firmly in place during trail rides, rock crawling, and daily commutes. Say goodbye to flying cargo on bumpy terrain. Multi-Purpose Design — Use as a roof cargo organizer, a rear-seat barrier to keep pets and children safely in the back, or roll up the rear window for fresh airflow with the built-in straps. Compatibility Model Generation Years Wrangler YJ 1st Gen 1987–1995 Wrangler TJ / LJ 2nd Gen 1997–2006 Wrangler JK (2-Door & 4-Door) 3rd Gen 2007–2018 Wrangler JL (2-Door & 4-Door) 4th Gen 2018–2021 Gladiator JT Pickup 2020–2021 Installation Guide Unfold the cargo net and identify the attachment straps (4–6 points depending on your model). Clip the front straps around the windshield frame or front sport bar crossmember. Secure the rear straps to the rear roll bar or sound bar — adjust strap length for a snug, taut fit. Route side straps to the side sport bars and tighten evenly across all points. Double-check all buckles are locked and the net sits flat with uniform tension. Load lightweight gear (jackets, blankets, soft bags) evenly across the net. For best results, avoid exceeding 15 lbs total. Frequently Asked Questions Q: Will this cargo net work with a hardtop installed? A: Yes. The net mounts to the roll bars and sport bars underneath the hardtop — it does not interfere with hardtop or soft top installation or removal. Q: How much weight can the net hold? A: We recommend a maximum load of 15 lbs (6.8 kg) distributed evenly. The net is designed for soft goods like clothing, blankets, and light camping gear — not heavy tools or recovery equipment. Q: Does it block rearview mirror visibility? A: When loaded with bulky items, the net may partially obstruct the rearview mirror. We recommend loading items toward the sides and keeping the center clear for maximum visibility. Q: Is it compatible with the factory Freedom Top panels on JK/JL? A: Absolutely. The net sits below the Freedom Top panels and does not affect panel installation, removal, or weather sealing. Q: Will the straps scratch or damage my roll bars? A: No. The straps feature smooth inner surfaces and quick-release buckles. They wrap securely around the roll bars without scratching or leaving marks.

Read more less

Product Overview The K2112 Carburetor Rebuild Kit with 3 Different Bowl Cover Gasket for Carb Ford 2N 8N 9N IH Farmall 100 130 140 200 230 240 A AV B BN Lo-Boy 185 is a high-quality replacement part built to exacting standards. Whether you're performing routine maintenance or a complete overhaul, this component provides the fit, finish, and reliability you expect from iFJF Direct. Key Features Precision-Engineered Fit: Manufactured to tight tolerances for a direct, hassle-free installation — no modifications required. Premium Materials: Constructed from high-grade materials that resist wear, corrosion, and fatigue for extended service life. OEM-Spec Performance: Designed to match or exceed original equipment specifications for consistent, dependable operation. Complete Package: Includes all necessary components for a professional-grade installation (verify contents in product images). Quality-Assured: Each unit undergoes rigorous inspection before shipping to ensure you receive a flawless product. Compatibility This replacement part is engineered for broad compatibility. Please check your equipment's part number against the listing to ensure proper fitment. Contact our support team if you need assistance with compatibility verification. Specifications Specification Detail Product Type Replacement Part Brand iFJF Condition New Fitment Direct Replacement Why Choose iFJF Direct? Fast, Reliable Shipping: Orders processed within 1 business day from our US warehouses. Expert Support: Our team knows diesel, automotive, and powersports parts inside and out. Quality Guarantee: Every iFJF part is backed by our satisfaction promise. Trusted by Pros & DIYers: Thousands of technicians and home mechanics rely on iFJF parts daily. Installation Tips Always consult your vehicle or equipment service manual before beginning installation. Clean all mounting surfaces thoroughly before installing the new replacement part. Compare the new part side-by-side with the old one to verify correct fitment. Use the proper tools and torque specifications as recommended by the manufacturer. If you encounter any issues, contact iFJF support for assistance. Frequently Asked Questions Q: Will this part fit my vehicle?A: This replacement part is designed for Ford, Farmall (Various). Please verify your specific year, make, model, and engine configuration matches. Contact our support team with your VIN or serial number if unsure. Q: Is this OEM or aftermarket?A: This is a high-quality aftermarket replacement replacement part manufactured to meet or exceed OEM specifications at a fraction of dealer cost. Q: What's included in the package?A: The package includes the replacement part as shown in the product images. Please review all images for exact contents. Q: How long does shipping take?A: Most orders ship within 1 business day from our US warehouse. Standard delivery takes 3-7 business days. Expedited options available at checkout. Q: What is the return policy?A: 30-day return window for unused items in original packaging. Contact us immediately if you receive a defective or incorrect item. Related Resources How to Rebuild Your Carburetor: A Step-by-Step Guide Top 5 Signs Your Carburetor Needs a Rebuild

Read more less

Product Overview The Kitchen Bathroom Garden Outdoor RV 15 Stage Shower Replacement Filter Cartridge Remove Chlorine is a high-quality water filter built to exacting standards. Whether you're performing routine maintenance or a complete overhaul, this component provides the fit, finish, and reliability you expect from iFJF Direct. Key Features Precision-Engineered Fit: Manufactured to tight tolerances for a direct, hassle-free installation — no modifications required. Premium Materials: Constructed from high-grade materials that resist wear, corrosion, and fatigue for extended service life. OEM-Spec Performance: Designed to match or exceed original equipment specifications for consistent, dependable operation. Complete Package: Includes all necessary components for a professional-grade installation (verify contents in product images). Quality-Assured: Each unit undergoes rigorous inspection before shipping to ensure you receive a flawless product. Compatibility This water filter is engineered for broad compatibility. Please check your equipment's part number against the listing to ensure proper fitment. Contact our support team if you need assistance with compatibility verification. Specifications Specification Detail Product Type Water Filter Brand iFJF Condition New Fitment Direct Replacement Why Choose iFJF Direct? Fast, Reliable Shipping: Orders processed within 1 business day from our US warehouses. Expert Support: Our team knows diesel, automotive, and powersports parts inside and out. Quality Guarantee: Every iFJF part is backed by our satisfaction promise. Trusted by Pros & DIYers: Thousands of technicians and home mechanics rely on iFJF parts daily. Installation Tips Always consult your vehicle or equipment service manual before beginning installation. Clean all mounting surfaces thoroughly before installing the new water filter. Compare the new part side-by-side with the old one to verify correct fitment. Use the proper tools and torque specifications as recommended by the manufacturer. If you encounter any issues, contact iFJF support for assistance. Frequently Asked Questions Q: Will this part fit my vehicle?A: This water filter is designed for Various (Various). Please verify your specific year, make, model, and engine configuration matches. Contact our support team with your VIN or serial number if unsure. Q: Is this OEM or aftermarket?A: This is a high-quality aftermarket replacement water filter manufactured to meet or exceed OEM specifications at a fraction of dealer cost. Q: What's included in the package?A: The package includes the water filter as shown in the product images. Please review all images for exact contents. Q: How long does shipping take?A: Most orders ship within 1 business day from our US warehouse. Standard delivery takes 3-7 business days. Expedited options available at checkout. Q: What is the return policy?A: 30-day return window for unused items in original packaging. Contact us immediately if you receive a defective or incorrect item.

Read more less

Product Overview The Kitchen Bathroom Garden Outdoor RV 15 Stage Water Filter to Remove Chlorine Fluoride is a high-quality water filter built to exacting standards. Whether you're performing routine maintenance or a complete overhaul, this component provides the fit, finish, and reliability you expect from iFJF Direct. Key Features Precision-Engineered Fit: Manufactured to tight tolerances for a direct, hassle-free installation — no modifications required. Premium Materials: Constructed from high-grade materials that resist wear, corrosion, and fatigue for extended service life. OEM-Spec Performance: Designed to match or exceed original equipment specifications for consistent, dependable operation. Complete Package: Includes all necessary components for a professional-grade installation (verify contents in product images). Quality-Assured: Each unit undergoes rigorous inspection before shipping to ensure you receive a flawless product. Compatibility This water filter is engineered for broad compatibility. Please check your equipment's part number against the listing to ensure proper fitment. Contact our support team if you need assistance with compatibility verification. Specifications Specification Detail Product Type Water Filter Brand iFJF Condition New Fitment Direct Replacement Why Choose iFJF Direct? Fast, Reliable Shipping: Orders processed within 1 business day from our US warehouses. Expert Support: Our team knows diesel, automotive, and powersports parts inside and out. Quality Guarantee: Every iFJF part is backed by our satisfaction promise. Trusted by Pros & DIYers: Thousands of technicians and home mechanics rely on iFJF parts daily. Installation Tips Always consult your vehicle or equipment service manual before beginning installation. Clean all mounting surfaces thoroughly before installing the new water filter. Compare the new part side-by-side with the old one to verify correct fitment. Use the proper tools and torque specifications as recommended by the manufacturer. If you encounter any issues, contact iFJF support for assistance. Frequently Asked Questions Q: Will this part fit my vehicle?A: This water filter is designed for Various (Various). Please verify your specific year, make, model, and engine configuration matches. Contact our support team with your VIN or serial number if unsure. Q: Is this OEM or aftermarket?A: This is a high-quality aftermarket replacement water filter manufactured to meet or exceed OEM specifications at a fraction of dealer cost. Q: What's included in the package?A: The package includes the water filter as shown in the product images. Please review all images for exact contents. Q: How long does shipping take?A: Most orders ship within 1 business day from our US warehouse. Standard delivery takes 3-7 business days. Expedited options available at checkout. Q: What is the return policy?A: 30-day return window for unused items in original packaging. Contact us immediately if you receive a defective or incorrect item.

Read more less

CNC Billet Aluminum Fuel Filter Cap for 2017-2020 Duramax L5P — Replaces OEM 134001 The L5P Duramax is the most powerful diesel GM has ever put in a heavy-duty truck, pushing 445 horsepower and 910 lb-ft of torque. But its factory fuel filter cap — a plastic component subjected to heat cycles, vibration, and repeated filter changes — remains a weak link. Cracked caps cause fuel leaks, stripped threads mean you can't properly seal the filter housing, and a failed cap on the road can leave you stranded. This billet aluminum fuel filter cap is CNC-machined from solid 6061-T6 aluminum for a lifetime of filter changes without deformation, stripping, or cracking. Key Features 6061-T6 Billet Aluminum: Precision CNC-machined from a solid block of aerospace-grade aluminum, not cast, not molded — this cap maintains dimensional accuracy through extreme temperature cycling and years of filter changes. Anodized Finish: Hard-coat anodized surface resists corrosion from road salt, diesel fuel exposure, and under-hood chemicals — it won't pit, oxidize, or degrade like raw aluminum. Stripped-Thread Insurance: The factory plastic cap threads are notorious for cross-threading and stripping, especially during roadside filter changes. Precision-cut aluminum threads engage smoothly and stay true for the life of the cap. OEM Fitment: Designed as a direct replacement for GM part number 134001, the L5P's factory fuel filter cap. Same dimensions, same O-ring seal interface, zero modifications required. Hex-Drive Center: The machined hex recess accepts a standard socket or wrench for positive removal torque — no more struggling with a filter strap wrench in the tight engine bay. Vehicle Compatibility Make Model Years Engine Chevrolet Silverado 2500HD 2017-2020 6.6L Duramax L5P Turbo Diesel Chevrolet Silverado 3500HD 2017-2020 6.6L Duramax L5P Turbo Diesel GMC Sierra 2500HD 2017-2020 6.6L Duramax L5P Turbo Diesel GMC Sierra 3500HD 2017-2020 6.6L Duramax L5P Turbo Diesel Technical Specifications Specification Value Part Type Fuel Filter Housing Cap Material 6061-T6 Billet Aluminum Manufacturing Process CNC Machined (Not Cast or Molded) Finish Hard-Coat Anodized (Corrosion Resistant) Replaces OEM 134001 (GM/ACDelco) Thread Type Precision-Cut Aluminum, OEM Profile Drive Style Machined Hex Recess (Socket-Compatible) Application Under-Hood Fuel Filter Housing (Engine-Mounted) Weight Approximately 0.45 lbs (Significantly Heavier than Plastic OEM) Why Replace Your Plastic Factory Cap? The OEM plastic fuel filter cap on the L5P is adequate when new, but repeated heat cycling (from -20°F winter starts to 220°F+ under-hood temps during heavy towing) causes the nylon material to degrade. The threads gradually lose their crisp profile, making each filter change harder than the last. Eventually, the cap either won't tighten to a proper seal (causing a fuel leak and loss of prime) or the drive recess rounds out, trapping a stuck cap on the housing. This billet aluminum replacement eliminates all three failure modes. It's a one-time upgrade that pays for itself the first time you avoid a roadside filter change nightmare. Installation & Maintenance This cap is a direct swap — remove the factory plastic cap, transfer the O-ring (or install a new one — recommended), and thread on the billet aluminum cap. Apply a thin film of clean diesel fuel or silicone-based O-ring lubricant to the seal before installation — this ensures a smooth seal and prevents O-ring pinching. Hand-tighten until the O-ring contacts the sealing surface, then snug with a socket — the aluminum-to-plastic thread interface doesn't require extreme torque. Snug is sufficient. After installation, cycle the ignition to prime the system (the L5P's electric lift pump handles this automatically) and inspect for any seepage. During future filter changes, the aluminum threads will remain true and smooth — no galling, no binding, just consistent, reliable operation. Frequently Asked Questions Q: Will this cap fit the 2020+ L5P trucks with the 10-speed Allison?A: Yes. The fuel filter housing design carried over unchanged for all L5P-equipped trucks through the 2020 model year. If your truck is a 2017, 2018, 2019, or 2020 Silverado HD or Sierra HD with the 6.6L L5P, this cap fits. Q: Do I need a special O-ring with this aluminum cap?A: No, the cap is designed to use the standard OEM-specification O-ring that comes with your L5P fuel filter (ACDelco TP1018 or equivalent). We strongly recommend replacing the O-ring with each filter change — never reuse an old O-ring regardless of cap material. Q: Won't the aluminum cap corrode against the factory plastic housing?A: No. Aluminum and nylon composite are galvanically compatible — there's no dissimilar-metal corrosion concern. The anodized finish provides an additional barrier, and the O-ring seal prevents direct metal-to-plastic contact at the sealing surface. Q: Is this cap compatible with the passenger-side frame-rail filter on the L5P?A: No. The L5P has two fuel filters — the engine-mounted filter (driver's side, under the hood) and the chassis-mounted filter (passenger side, frame rail). This cap is specifically for the under-hood engine-mounted filter housing. The frame-rail filter uses a different cap design. 🔧 OEM Cross-Reference & Compatibility OEM Part Number Brand Notes 134001 GM / ACDelco Original GM fuel filter cap Fitment: 2017-2020 Chevy Silverado / GMC Sierra 2500HD 3500HD 6.6L Duramax L5P. Replaces the plastic factory cap prone to cracking and stripping. CNC-machined billet aluminum construction with upgraded O-ring seal. Common failure: Factory plastic cap cracks from overtightening, causing air leaks in the fuel system — symptoms include hard starting, rough idle, and P0087 low fuel rail pressure code.

Read more less

L5P Can Bus Plugs — Essential for 2017-2019 Duramax 6.6L L5P Configurations The iFJF 4-Pack L5P Can Bus Plugs are precision-engineered connectors designed for 2017-2019 Chevrolet Silverado 2500HD/3500HD and GMC Sierra 2500HD/3500HD equipped with the 6.6L L5P Duramax diesel engine. These plugs provide reliable closed-loop signal communication when configuring aftermarket exhaust system setups. Key Features ABS Construction: Durable, heat-resistant ABS material withstands engine bay temperatures and vibration 4-Pack Complete Set: Includes all plugs needed for full exhaust system configuration Plug-and-Play: No splicing, no programming — direct connector replacement Secure Fit: Precision-molded connectors ensure tight, weatherproof seal OEM Connector Compatibility: Matches factory harness connectors for seamless integration Compatibility Year Make Model Engine 2017-2019 Chevrolet Silverado 2500HD / 3500HD 6.6L L5P Duramax 2017-2019 GMC Sierra 2500HD / 3500HD 6.6L L5P Duramax Technical Specifications Specification Detail Material ABS (Acrylonitrile Butadiene Styrene) Item Type CAN BUS Plug / Connector Quantity 4 Pieces Connector Type OEM-Compatible Pin Layout Operating Temperature -40°F to 257°F (-40°C to 125°C) Why Choose iFJF L5P Can Bus Plugs? Tested Reliability: Each plug is tested for proper resistance values to ensure accurate ECM signal communication Weather-Sealed: Rubber grommets prevent moisture and debris intrusion Cost-Effective: Complete 4-pack at a fraction of dealership connector pricing Fast US Shipping: Ships from domestic warehouse, typically arrives within 3-7 business days Frequently Asked Questions Q: What do these CAN bus plugs do?A: These plugs replace the factory NOx sensor and DEF module harness connections, providing a closed signal loop back to the ECM for proper system communication when running aftermarket exhaust configurations. Q: Will these work on my 2020 Duramax?A: No, these are specifically designed for 2017-2019 L5P Duramax. The 2020-2022 models require a different connector pinout. Please see our 2020-2022 version for those model years. Q: Is programming required?A: These are plug-and-play hardware connectors. No tuning or ECM reprogramming is needed for signal loop operation. Q: Are these weatherproof?A: Yes, the connectors feature sealed rubber grommets and weather-resistant ABS housing to protect against moisture, road salt, and debris. Q: How long do they last?A: With proper installation in a clean, dry location away from direct exhaust heat, these plugs will last the life of your vehicle. Related Products Explore more products from our EGR & DPF Delete Kits collection: All EGR & DPF Delete Kits — Browse our complete selection Fuel Filters & Water Separators — Protect your fuel system Oil Filters — Premium filtration for diesel engines

Read more less

L5P Can Bus Plugs for 2020-2022 Duramax 6.6L L5P — DPF/DEF Delete Connectors The iFJF L5P Can Bus Plugs are designed specifically for 2020-2022 Chevrolet Silverado 2500HD/3500HD and GMC Sierra 2500HD/3500HD with the 6.6L L5P Duramax diesel engine. These plugs replace the NOx sensor and DEF module harness connections when running aftermarket exhaust configurations, providing proper closed-loop signal communication to the ECM. Key Features 2020-2022 Specific: Correct connector pinout for the updated L5P platform Used with Aftermarket Exhaust: Designed for use with delete pipes or aftermarket exhaust systems Replaces NOx & DEF Module Connectors: Plugs into factory harness in place of NOx and DEF modules Closed Signal Loop: Provides proper resistance values for accurate ECM communication Durable Construction: Automotive-grade materials for long-term reliability Simple Installation: Unplug factory connectors, plug in — no cutting or splicing Compatibility Year Make Model Engine 2020-2022 Chevrolet Silverado 2500HD / 3500HD 6.6L L5P Duramax 2020-2022 GMC Sierra 2500HD / 3500HD 6.6L L5P Duramax Technical Specifications Specification Detail Connector Type OEM-Compatible Pin Layout (2020-2022 L5P) Application DPF/DEF System Bypass Signal Type Closed-Loop Resistance Installation Plug-and-Play (No Tuning Required for Signal) Why Choose iFJF 2020-2022 L5P Plugs? Correct Pinout: Unlike generic connectors, these are pinned specifically for the 2020-2022 L5P ECM architecture Tested & Verified: Each set is tested for correct resistance values before shipping Complete Set: All required plugs included — no need to source additional connectors Frequently Asked Questions Q: Will these work on my 2019 L5P?A: No, these are for 2020-2022 L5P models only. The 2017-2019 L5P uses a different ECM architecture and connector pinout. Please see our 2017-2019 version. Q: Do I need to tune my truck after installing these?A: These plugs handle the signal loop, but aftermarket tuning is still required to optimize engine parameters for aftermarket exhaust configurations. Q: Are these weatherproof?A: Yes, the connectors feature sealed housings to protect against moisture, road grime, and vibration. Q: What's included in the package?A: Complete set of CAN bus plugs for the NOx sensors and DEF module connections. Quantity varies by configuration. Q: How do I know which connectors go where?A: Each plug is labeled for its corresponding sensor position. Detailed installation diagram included. Related Products Explore more products from our EGR & DPF Delete Kits collection: All EGR & DPF Delete Kits — Browse our complete selection Fuel Filters & Water Separators — Protect your fuel system Oil Filters — Premium filtration for diesel engines

Read more less

Product Overview The Leveling Installation Tool Replacement for Horizontal Telescopic Sight on Annular or Integrated Base is a high-quality replacement part built to exacting standards. Whether you're performing routine maintenance or a complete overhaul, this component provides the fit, finish, and reliability you expect from iFJF Direct. Key Features Precision-Engineered Fit: Manufactured to tight tolerances for a direct, hassle-free installation — no modifications required. Premium Materials: Constructed from high-grade materials that resist wear, corrosion, and fatigue for extended service life. OEM-Spec Performance: Designed to match or exceed original equipment specifications for consistent, dependable operation. Complete Package: Includes all necessary components for a professional-grade installation (verify contents in product images). Quality-Assured: Each unit undergoes rigorous inspection before shipping to ensure you receive a flawless product. Compatibility This replacement part is engineered for broad compatibility. Please check your equipment's part number against the listing to ensure proper fitment. Contact our support team if you need assistance with compatibility verification. Specifications Specification Detail Product Type Replacement Part Brand iFJF Condition New Fitment Direct Replacement Why Choose iFJF Direct? Fast, Reliable Shipping: Orders processed within 1 business day from our US warehouses. Expert Support: Our team knows diesel, automotive, and powersports parts inside and out. Quality Guarantee: Every iFJF part is backed by our satisfaction promise. Trusted by Pros & DIYers: Thousands of technicians and home mechanics rely on iFJF parts daily. Installation Tips Always consult your vehicle or equipment service manual before beginning installation. Clean all mounting surfaces thoroughly before installing the new replacement part. Compare the new part side-by-side with the old one to verify correct fitment. Use the proper tools and torque specifications as recommended by the manufacturer. If you encounter any issues, contact iFJF support for assistance. Frequently Asked Questions Q: Will this part fit my vehicle?A: This replacement part is designed for Various (Various). Please verify your specific year, make, model, and engine configuration matches. Contact our support team with your VIN or serial number if unsure. Q: Is this OEM or aftermarket?A: This is a high-quality aftermarket replacement replacement part manufactured to meet or exceed OEM specifications at a fraction of dealer cost. Q: What's included in the package?A: The package includes the replacement part as shown in the product images. Please review all images for exact contents. Q: How long does shipping take?A: Most orders ship within 1 business day from our US warehouse. Standard delivery takes 3-7 business days. Expedited options available at checkout. Q: What is the return policy?A: 30-day return window for unused items in original packaging. Contact us immediately if you receive a defective or incorrect item.

Read more less

Product Overview The LF14000NN Lube Oil Filter is a premium-grade replacement oil filter engineered to deliver OEM-level performance at an aftermarket price. Designed for Cummins, Ford applications (Various), this component ensures your engine receives proper filtration for optimal performance and longevity. Cross-References: 57746XD, BD7154, LF14000NN, LF9001, LF9080 Key Features & Benefits Maximum Engine Protection: High-capacity media traps microscopic wear particles that cause engine damage Consistent Oil Flow: Precision-engineered flow paths maintain proper oil pressure at all RPM ranges Extended Drain Capability: Robust construction supports extended oil change intervals with synthetic oil Easy Installation: Direct fit replacement — no modifications needed for listed applications Quality Assured: Each unit undergoes rigorous quality control testing before shipment Vehicle Compatibility 📋 Cross-Reference Compatibility OEM Part Numbers 57746XD, BD7154, LF14000NN, LF9001, LF9080 Fitment Years Various Vehicle Applications Cummins, Ford Why Choose iFJF? At iFJF Direct, we specialize in providing diesel and heavy-duty vehicle owners with high-quality replacement parts at competitive prices. Our oil filters are sourced from trusted manufacturers and backed by our commitment to quality and customer service. ✅ OEM-Spec Quality Without the OEM Price ✅ Fast Shipping from US Warehouses ✅ Dedicated Customer Support Team ✅ 30-Day Easy Returns Technical Specifications 📐 Technical Specifications Filtration Efficiency ≥99% at Rated Micron Size Media Type Synthetic/Cellulose Blend Media Anti-Drain Back Valve Silicone (Prevents Dry Starts) Replacement Interval Per Vehicle Manufacturer Recommendations Package Includes 1x Oil Filter (as shown in listing images) Frequently Asked QuestionsQ: How often should I change the oil filter?A: Replace the oil filter with every oil change. For diesel engines, typically every 5,000-15,000 miles depending on duty cycle.Q: Is this filter compatible with synthetic oil?A: Yes, fully compatible with both conventional and synthetic diesel engine oils.Q: How does this compare to OEM?A: Meets or exceeds OEM specifications for filtration efficiency, flow rate, and burst pressure at a more competitive price.Q: Do you offer a warranty?A: Yes! All iFJF products come with our satisfaction guarantee. Contact us if you experience any issues. Q: How fast do you ship?A: Orders ship within 1-2 business days from our US warehouses. Typical delivery is 3-7 business days depending on your location.

Read more less

Premium Oil Filtration for Cummins Compact Diesels The LF16352 spin-on oil filter is the standard lube filter for Cummins ISF 3.8L and QSF 2.8L diesel engines — the compact powerplants found in delivery trucks, marine auxiliaries, construction equipment, and agricultural machinery. Our replacement filter meets or exceeds OEM filtration specifications to protect your engine's bearings, turbocharger, and hydraulic systems from oil-borne contaminants. Why Oil Filtration Matters for Small Diesels Compact diesel engines like the ISF3.8 and QSF2.8 run at higher RPM than their big-bore counterparts, generating more oil shear and contaminants per displacement. A high-quality oil filter with consistent micron rating is essential for maintaining oil pressure, preventing turbo bearing wear, and extending oil change intervals. Compatibility Engine Displacement Application Cummins ISF 3.8 3.8L I4 Delivery trucks, buses, construction equipment Cummins QSF 2.8 2.8L I4 Marine auxiliary, compact construction, ag equipment Cross-Reference Part Numbers: Fleetguard LF16352, Donaldson P556352, Baldwin B40050, Sakura SO10116, Mann SP96023 Specifications Specification Detail Type Spin-on full-flow lube oil filter Micron Rating 15 micron nominal — ≥95% efficiency Thread Size Standard metric — direct spin-on replacement Anti-Drain Back Valve Yes — silicone valve prevents dry starts Bypass Valve Yes — integrated pressure relief for cold starts Gasket Pre-lubricated nitrile rubber — no leaks, easy removal Why Choose iFJF? OEM-equivalent filtration — 15-micron efficiency matches Fleetguard LF16352 specs Silicone anti-drain valve — Superior to rubber — stays flexible in cold weather Heavy-duty canister — Burst-tested to 5x rated operating pressure Pre-lubed gasket — Easy spin-on, easy spin-off at next oil change Universal fit — Cross-references to 6+ major filter brands Frequently Asked Questions Q: What's the oil change interval with this filter?A: Cummins recommends oil changes every 500 hours or 6 months for ISF3.8/QSF2.8 engines under normal operating conditions. Severe duty (high dust, high idle time) requires more frequent changes — consult your equipment manual. Q: Does this filter have a bypass valve?A: Yes. An internal bypass valve opens at approximately 12-15 PSI differential pressure to ensure oil flow during cold starts or if the filter becomes clogged. The anti-drain back valve keeps oil in the filter when the engine is off for instant pressure on startup. Q: Is this filter suitable for marine use?A: Yes. The filter is compatible with QSF2.8 marine auxiliary engines. Always follow your marine engine manufacturer's oil specification and change interval recommendations. Q: How does this compare to the Fleetguard LF16352?A: This filter is manufactured to the same 15-micron filtration standard as the Fleetguard OEM filter. It features equivalent media area, bypass valve calibration, and anti-drain valve performance. Q: Can I use this on a Cummins ISB or ISC engine?A: No. The LF16352 is designed specifically for ISF3.8 and QSF2.8 engines. Larger engines (ISB, ISC, ISL, ISX) require different filter models. Always verify the part number against your engine's manual.

Read more less

Product Overview The LF17356 Oil Filter is a premium-grade replacement oil filter engineered to deliver OEM-level performance at an aftermarket price. Designed for CAT, Ford applications (Various), this component ensures your engine receives proper filtration for optimal performance and longevity. Cross-References: B40051, CP40001, LF17356 Key Features & Benefits Maximum Engine Protection: High-capacity media traps microscopic wear particles that cause engine damage Consistent Oil Flow: Precision-engineered flow paths maintain proper oil pressure at all RPM ranges Extended Drain Capability: Robust construction supports extended oil change intervals with synthetic oil Easy Installation: Direct fit replacement — no modifications needed for listed applications Quality Assured: Each unit undergoes rigorous quality control testing before shipment Vehicle Compatibility 📋 Cross-Reference Compatibility OEM Part Numbers B40051, CP40001, LF17356 Fitment Years Various Vehicle Applications CAT, Ford Why Choose iFJF? At iFJF Direct, we specialize in providing diesel and heavy-duty vehicle owners with high-quality replacement parts at competitive prices. Our oil filters are sourced from trusted manufacturers and backed by our commitment to quality and customer service. ✅ OEM-Spec Quality Without the OEM Price ✅ Fast Shipping from US Warehouses ✅ Dedicated Customer Support Team ✅ 30-Day Easy Returns Technical Specifications 📐 Technical Specifications Filtration Efficiency ≥99% at Rated Micron Size Media Type Synthetic/Cellulose Blend Media Anti-Drain Back Valve Silicone (Prevents Dry Starts) Replacement Interval Per Vehicle Manufacturer Recommendations Package Includes 1x Oil Filter (as shown in listing images) Frequently Asked QuestionsQ: How often should I change the oil filter?A: Replace the oil filter with every oil change. For diesel engines, typically every 5,000-15,000 miles depending on duty cycle.Q: Is this filter compatible with synthetic oil?A: Yes, fully compatible with both conventional and synthetic diesel engine oils.Q: How does this compare to OEM?A: Meets or exceeds OEM specifications for filtration efficiency, flow rate, and burst pressure at a more competitive price.Q: Do you offer a warranty?A: Yes! All iFJF products come with our satisfaction guarantee. Contact us if you experience any issues. Q: How fast do you ship?A: Orders ship within 1-2 business days from our US warehouses. Typical delivery is 3-7 business days depending on your location.

Read more less

Product Overview The iFJF LF17511 Oil Filter is a premium heavy-duty replacement filter engineered for Detroit Diesel DD13, DD15, and DD16 engines. Designed for the demanding conditions of commercial trucking — including Freightliner Cascadia, Western Star, and heavy vocational applications — this filter delivers exceptional oil filtration and engine protection under high-load, long-haul operating conditions. Manufactured to IATF 16949 quality standards. Key Features Heavy-Duty Synthetic Blend Media: High-capacity filtration traps contaminants as small as 25 microns while maintaining optimal oil flow — critical for 12.8L-15.6L engine protection. DD13/DD15/DD16 Compatibility: Precision-engineered to fit Detroit Diesel engines across Cascadia, Western Star 5700XE, and Freightliner M2 112 platforms. Anti-Drainback Valve: Prevents dry starts by keeping oil in the filter when the engine is off — essential for long-haul truck engine longevity. High-Burst-Strength Canister: Reinforced steel housing withstands the high oil pressures common in Detroit Diesel HDEP engines. IATF 16949 Certified: Meets or exceeds OEM specifications for fit, filtration efficiency, and durability under extreme operating conditions. Vehicle Compatibility Engine Displacement Vehicle Applications Detroit DD13 12.8L Freightliner Cascadia, M2 112, Western Star 4700 Detroit DD15 14.8L Freightliner Cascadia, Western Star 4900/5700XE Detroit DD16 15.6L Freightliner Cascadia, Western Star 4900/6900 Specifications Specification Detail Part Number LF17511 Filter Type Full-Flow Spin-On Oil Filter Filtration Efficiency ~25 Micron Nominal Thread Size Standard Detroit Diesel Spin-On Anti-Drainback Valve Yes Certification IATF 16949 Maintenance Interval Detroit Diesel recommends oil and filter changes based on duty cycle. Under normal highway operation: every 25,000-50,000 miles. Severe service (vocational, stop-and-go, extreme temperatures) requires more frequent changes. Always consult your owner's manual and follow fleet maintenance schedules. Frequently Asked Questions Q: Will this fit my 2018 Cascadia with DD15?A: Yes. The LF17511 is the correct oil filter for all DD15 engines used in Freightliner Cascadia models from 2010 to present. Q: Is this an OEM Detroit Diesel filter?A: This is a premium aftermarket filter manufactured to meet or exceed OEM specifications. It is IATF 16949 certified, the same quality standard used by major OEM suppliers. Q: How often should I change this filter?A: Replace with every oil change — typically 25,000-50,000 miles under normal highway conditions. Severe-duty applications should follow shorter intervals. Q: Does this filter have an anti-drainback valve?A: Yes. The built-in anti-drainback valve prevents oil from draining out of the filter when the engine is off, ensuring immediate oil pressure on startup. Q: Does it fit DD13 and DD16 engines too?A: Yes. The LF17511 fits DD13 (12.8L), DD15 (14.8L), and DD16 (15.6L) Detroit Diesel engines. Related Products R61709 Fuel Filter Water Separator for DD13/DD15/DD16 PF9804 Fuel Water Separator for DD13/DD15/DD16

Read more less

Product Overview The LF17549 Oil Filter Replacement is a premium-grade replacement oil filter engineered to deliver OEM-level performance at an aftermarket price. Designed for Ford, International applications (Various), this component ensures your engine receives proper filtration for optimal performance and longevity. Cross-References: 3007498C92, LF17549 Key Features & Benefits Maximum Engine Protection: High-capacity media traps microscopic wear particles that cause engine damage Consistent Oil Flow: Precision-engineered flow paths maintain proper oil pressure at all RPM ranges Extended Drain Capability: Robust construction supports extended oil change intervals with synthetic oil Easy Installation: Direct fit replacement — no modifications needed for listed applications Quality Assured: Each unit undergoes rigorous quality control testing before shipment Vehicle Compatibility 📋 Cross-Reference Compatibility OEM Part Numbers 3007498C92, LF17549 Fitment Years Various Vehicle Applications Ford, International Why Choose iFJF? At iFJF Direct, we specialize in providing diesel and heavy-duty vehicle owners with high-quality replacement parts at competitive prices. Our oil filters are sourced from trusted manufacturers and backed by our commitment to quality and customer service. ✅ OEM-Spec Quality Without the OEM Price ✅ Fast Shipping from US Warehouses ✅ Dedicated Customer Support Team ✅ 30-Day Easy Returns Technical Specifications 📐 Technical Specifications Filtration Efficiency ≥99% at Rated Micron Size Media Type Synthetic/Cellulose Blend Media Anti-Drain Back Valve Silicone (Prevents Dry Starts) Replacement Interval Per Vehicle Manufacturer Recommendations Package Includes 1x Oil Filter (as shown in listing images) Frequently Asked QuestionsQ: How often should I change the oil filter?A: Replace the oil filter with every oil change. For diesel engines, typically every 5,000-15,000 miles depending on duty cycle.Q: Is this filter compatible with synthetic oil?A: Yes, fully compatible with both conventional and synthetic diesel engine oils.Q: How does this compare to OEM?A: Meets or exceeds OEM specifications for filtration efficiency, flow rate, and burst pressure at a more competitive price.Q: Do you offer a warranty?A: Yes! All iFJF products come with our satisfaction guarantee. Contact us if you experience any issues. Q: How fast do you ship?A: Orders ship within 1-2 business days from our US warehouses. Typical delivery is 3-7 business days depending on your location.

Read more less

Heavy-Duty Oil Protection for Big-Bore Cummins Engines The LF9009 spin-on oil filter is built for the high oil volume and pressure demands of Cummins mid-range and heavy-duty diesel engines — ISC 8.3L, ISL/QSL 9.0L, ISM, N14, and M11 series. These engines power Class 8 trucks, motorhomes, marine vessels, and industrial equipment where engine reliability means everything. Our replacement filter delivers OEM-spec filtration at a competitive price. Engine Protection You Can Count On Big-bore diesels move 10-15 gallons of oil through the filter every minute at operating RPM. Any compromise in filtration quality means abrasive wear on main bearings, rod bearings, cam lobes, and turbocharger bearings. The LF9009 uses high-capacity cellulose/synthetic blend media to maintain flow while capturing particles down to 20 microns — the critical size range for bearing damage. Compatibility Engine Series Displacement Common Applications Cummins ISC 8.3L I6 Class 6-7 trucks, buses, motorhomes, fire trucks Cummins ISL / QSL 8.9L I6 Class 7-8 trucks, motorhomes, marine propulsion Cummins ISM 10.8L I6 Class 8 trucks, construction, marine Cummins N14 14.0L I6 Class 8 trucks, heavy equipment (1991-2000) Cummins M11 10.8L I6 Class 8 trucks, industrial (1994-1998) Cross-Reference Part Numbers: Fleetguard LF9009, Cummins 3401544, Donaldson XLF75000, Baldwin B96 Specifications Specification Detail Type Spin-on full-flow lube oil filter — heavy-duty canister Micron Rating 20 micron nominal — ≥95% efficiency Thread Size 1-1/2"-16 UNF — standard Cummins heavy-duty thread Anti-Drain Back Valve Yes — silicone valve for instant oil pressure on cold start Bypass Valve Yes — calibrated pressure relief for cold start protection Canister Heavy-gauge steel — burst pressure exceeds 600 PSI Gasket Pre-lubricated high-temperature nitrile Installation Tips Drain oil completely — Engine warm, drain plug out, allow 15+ minutes for full drain Clean the filter mounting surface — Remove all old gasket material and oil residue Pre-fill the new filter — Pour clean oil into the center hole until the media is saturated (takes about 1 quart for LF9009-sized filters) Lubricate the gasket — A thin film of clean oil on the rubber seal Spin on until gasket contacts — Then 3/4 to 1 full turn by hand. Do NOT use a filter wrench to install Start engine and check for leaks — Verify oil pressure rises within 5 seconds Why Choose iFJF? OEM-spec filtration — Matches Fleetguard LF9009 performance and flow characteristics Heavy-duty canister — Built for 600+ PSI burst pressure — handles cold-start oil pressure spikes Silicone anti-drain valve — Maintains flexibility from -40°F to 300°F Pre-lubed gasket — No dry gasket leaks, easy spin-off at the next change Proven fit — Used in fleet maintenance programs across North America Frequently Asked Questions Q: What's the recommended oil change interval for ISC/ISL engines?A: Cummins recommends 15,000-25,000 miles depending on duty cycle and oil type. Severe service (heavy towing, high idle time, dusty conditions) calls for the shorter interval. Always follow your engine manufacturer's maintenance schedule. Q: Do I need to pre-fill the filter before installation?A: Yes — highly recommended for large filters like the LF9009. Pre-filling prevents the engine from running without oil pressure during the few seconds it takes to fill the filter canister. This is critical for turbocharger protection. Q: Is this the correct filter for my N14 Cummins?A: Yes — the LF9009 is the standard oil filter for all N14 and M11 engines. It also fits ISC, ISL, and QSL series engines. Q: Can I use this on a Caterpillar engine?A: No. This filter has a 1-1/2"-16 thread pattern designed for Cummins engines. Caterpillar engines use different thread sizes and gasket diameters. Cross-referencing to non-Cummins engines is not recommended. Q: What's the difference between LF9009 and LF9001?A: The LF9009 is a full-flow filter (filters all oil every pass). The LF9001 is a bypass filter (filters a small portion of oil to a finer micron rating). These are different filter types and are not interchangeable.

Read more less

Product Overview The iFJF License Plate Frame for Jeep Wrangler TJ 1997-2006 - Rear Bumper Mount Bracket is a premium-quality aftermarket replacement part engineered for 1997-2006 Ram/Dodge / Jeep diesel engines vehicles. Designed to meet or exceed OEM specifications, this License Plate Frames delivers exceptional performance, durability, and reliability for compatible models owners who demand the best for their vehicles. Key Features Precision Engineering: Manufactured to exact OEM specifications using advanced CNC machining and rigorous quality control processes for perfect fitment every time. Premium Materials: Constructed from high-grade materials selected for maximum durability, corrosion resistance, and long service life under demanding conditions. Direct Fit Installation: Designed as a direct bolt-on replacement with no modifications required — simply remove the old part and install this one using basic hand tools. Quality Certified: Backed by IATF 16949 certified manufacturing standards, ensuring consistent quality and reliability across every unit produced. Comprehensive Warranty: Covered by iFJF's standard warranty against manufacturing defects, with dedicated customer support available to answer your questions. Compatibility Specification Details Vehicle Make Ram/Dodge / Jeep Vehicle Models compatible models Year Range 1997-2006 Engine diesel engines Part Number iFJF License Plate Frame Replaces OEM OEM specifications Why Choose iFJF Direct? At iFJF Direct, we specialize in providing diesel enthusiasts and professional mechanics with premium aftermarket parts that deliver genuine value. Every product we sell is carefully selected for quality, tested for performance, and backed by our commitment to customer satisfaction. Whether you're maintaining a daily driver, building a competition truck, or servicing a fleet, iFJF has the parts you need with the quality you can trust. Frequently Asked Questions Q: Will this fit my 1997-2006? A: This License Plate Frames is specifically designed for 1997-2006 Ram/Dodge / Jeep compatible models with the diesel engines. Always verify your vehicle's exact year, make, model, and engine specification match the compatibility information above before ordering. Q: Is professional installation required? A: Installation difficulty varies by vehicle and skill level. For most applications, this is a direct bolt-on replacement that can be completed with basic hand tools. We always recommend consulting a certified mechanic if you are unsure about any installation procedure. Q: What's included with my purchase? A: Your purchase includes the License Plate Frames as shown. Please review the product images and description carefully. If additional hardware or gaskets are required for installation, they are included where noted. Q: What is your shipping and delivery policy? A: iFJF Direct offers fast worldwide shipping. Orders are typically processed within 1-2 business days. Shipping times vary by destination. Free shipping is available on qualifying orders. Contact our support team for specific delivery estimates to your location. Q: What warranty coverage do you provide? A: All iFJF products are warranted against manufacturing defects. Our warranty covers replacement or refund of defective products. Contact our support team with your order number to initiate a warranty claim. We pride ourselves on standing behind every product we sell. Order With Confidence When you order from iFJF Direct, you're getting more than just a License Plate Frames — you're getting our commitment to quality, reliability, and customer satisfaction. Every product is backed by our warranty and supported by our knowledgeable customer service team. Order yours today and experience the iFJF difference! 📚 Related Guides & Articles Get the most out of your purchase with these helpful resources: How to Install a Bluetooth Kill Switch: Anti-Theft Battery Disconnect Guide How to Install iFJF R12T Fuel Filter/Water Separator: Complete Step-by-Step Guide

Read more less

Product Overview This iFJF 16-piece LS7-style hydraulic roller lifter set is a direct replacement for GM Gen III/IV LS-based V8 engines. Precision CNC-machined from high-grade alloy steel with hardened roller tips, these lifters are engineered to handle the demands of high-RPM operation, aggressive camshaft profiles, and sustained heavy loads. Replaces GM OEM part numbers 17122490, 12499225, and the popular HL124 aftermarket designation. Covers all LS engine variants from 4.8L to 6.2L. Key Features Complete 16-Piece Set — Includes all 16 lifters needed for a full V8 engine. No need to buy two 8-piece sets or risk mismatched lifters. LS7-Style Heavy Duty Design — Based on the factory LS7 lifter specification with improved internal valving for consistent bleed-down rates at high RPM. Precision CNC Machining — Tight manufacturing tolerances ensure consistent lifter preload across all 16 positions, reducing valvetrain noise and wear. Hardened Roller Tips — Heat-treated roller wheels resist wear and pitting even with aggressive aftermarket camshaft lobes. Universal LS Fitment — Compatible with all Gen III and Gen IV LS engines: 4.8L (LR4, LY2), 5.3L (LM7, L59, LMG, LC9, LH6), 5.7L (LS1), 6.0L (LS2, LQ4, LQ9, L76, LY6), and 6.2L (LS3, L92, L9H). Compatibility Engine Displacement RPO Codes Common Vehicles 4.8L V8 4800cc LR4, LY2 Silverado 1500, Sierra 1500, Express, Savana 5.3L V8 5300cc LM7, L59, LMG, LC9, LH6, LS4 Silverado, Tahoe, Suburban, Avalanche, Yukon, TrailBlazer 5.7L V8 5700cc LS1 Camaro, Firebird, Corvette C5, GTO 6.0L V8 6000cc LS2, LQ4, LQ9, L76, LY6 Corvette C6, GTO, TrailBlazer SS, Silverado SS, Escalade 6.2L V8 6200cc LS3, L92, L9H, L94 Corvette C6, Camaro SS, Escalade, Denali 7.0L V8 7000cc LS7 Corvette Z06, Camaro Z/28 Specifications Parameter Value OEM Part Numbers 17122490, 12499225, HL124 Lifter Type Hydraulic Roller Quantity 16 Lifters (Complete V8 Set) Lifter Body Diameter 0.842" (Standard LS Bore) Roller Wheel Diameter 0.700" Travel/Plunger Range 0.060" Material Alloy Steel Body, Hardened Roller Tip When to Replace LS Lifters LS lifters are a known weak point, especially on higher-mileage engines and those with aftermarket camshafts. Common symptoms of failing lifters include: ticking noise from the valvetrain that doesn't go away when warm, misfire codes (P0300), collapsed lifter causing dead cylinder, and metal debris in oil. If you're doing a cam swap, replacing lifters is mandatory — never reuse old lifters on a new camshaft. This 16-piece set provides a cost-effective alternative to OEM GM lifters without compromising quality. Installation Tips ALWAYS replace lifters when installing a new camshaft — used lifters will destroy a new cam lobe Soak lifters in engine oil for 30 minutes before installation to pre-fill Apply assembly lube to roller tips and lifter bodies before inserting into lifter bores Use new lifter trays (guides) — old plastic trays become brittle and can crack Check lifter preload after installation with adjustable pushrods or proper-length stock pushrods Prime the oil system before first start to ensure lifters are full of oil Break in with high-zinc oil (ZDDP) for the first 500 miles if also replacing the camshaft Frequently Asked Questions Q: Will these fit my 2007 Silverado 5.3L (LMG)?A: Yes. These lifters are a direct replacement for all Gen IV 5.3L engines including LMG, LC9, LH6, and LY5 variants found in 2007-2013 Silverado/Sierra 1500. Q: Do I need to replace the lifter trays too?A: Strongly recommended. The factory plastic lifter trays (GM part 12595365) become brittle over time from heat cycling. New trays are inexpensive insurance against lifter rotation and catastrophic failure. Q: Can I use these with a performance camshaft?A: Yes. These LS7-style lifters are rated for higher RPM operation than standard LS1 lifters. They work well with mild to moderate aftermarket camshafts (up to .600" lift, up to 6,500 RPM). For more aggressive setups, consider link-bar lifters. Q: Do I need to remove the cylinder heads to replace lifters?A: Yes. LS lifters are located under the cylinder heads. Head removal is required. Replace head gaskets and head bolts (LS engines use torque-to-yield bolts) at the same time. Q: What's included in the 16-pack?A: 16 hydraulic roller lifters. Lifter trays/guides, pushrods, head gaskets, and head bolts are sold separately. Q: Are these the same as OEM LS7 lifters?A: These are manufactured to LS7 specifications with equivalent internal valving and hardening. They provide comparable performance and durability at a significantly lower price point than OEM GM lifters.

Read more less

Product Overview Protect your Jeep's door locks and add a custom touch with these magnetic keyhole covers, designed specifically for the 2018-2024 Jeep Wrangler JL and Gladiator JT. The Black Flag design delivers a rugged, patriotic look while the weatherproof magnetic seal keeps moisture, dirt, and road salt out of your keyholes — preventing rust, freezing, and theft. Installation takes seconds with no tools or adhesive required. Key Features Strong Magnetic Hold: Built-in high-strength magnet holds the cover securely against the lock face at highway speeds and on rough trails. Weatherproof Protection: Silicone sealing pad creates a water-resistant barrier that keeps rain, snow, mud, and road salt out of your door locks. Premium Construction: High-quality resin body with UV-resistant finish — will not fade, crack, or yellow from sun exposure. Rubber-Coated Magnet: Soft rubber coating on the magnet prevents scratches on your Jeep's paint around the keyhole. Tool-Free Installation: Simply place the cover over the keyhole — the magnet does the rest. Remove and reinstall in seconds. Perfect OEM Fit: Precision-molded to match the exact contours of JL and JT door lock cylinders. Compatibility Year Make Model Trims 2018-2024 Jeep Wrangler JL (2-Door & 4-Door) Sport, Sport S, Sahara, Rubicon, 4xE, 392, Willys 2020-2024 Jeep Gladiator JT Sport, Sport S, Overland, Rubicon, Mojave, Willys Note: These covers protect the physical keyhole only. Keyless entry, remote start, and proximity key functions are unaffected. Specifications Specification Value Material High-Quality Resin + Rubber Seal Design Black Flag (Patriotic American Flag Pattern) Attachment Magnetic (rubber-coated, scratch-free) Weather Resistance Waterproof seal, UV-resistant finish Installation No tools, no adhesive, instant placement Installation Clean the keyhole area with a microfiber cloth to remove any dust or dirt Position the magnetic cover over the driver-side door keyhole The magnet will automatically align and hold the cover in place Repeat for the passenger-side door To remove, simply pull the cover off — no residue or marks left behind Why Choose iFJF iFJF Direct is a trusted source for Jeep Wrangler and Gladiator accessories. From keyhole covers to door hinge solutions, we stock hundreds of products designed specifically for the JL and JT platform. Fast shipping from US warehouses and responsive customer support mean you spend less time waiting and more time on the trail. Related Products Jeep Wrangler JL/JT Magnetic Keyhole Covers — Standard design option Jeep Door Bushing Removal Tool — Essential for door removal Jeep Wrangler JL Hood Latches — Keep your engine bay secure Jeep Tailgate Rubber Plug Set — Weatherproof your tailgate Frequently Asked Questions Q: Will these fit my 2024 Jeep Wrangler 4xE?A: Yes, these keyhole covers are compatible with all 2018-2024 Wrangler JL models including the 4xE plug-in hybrid. The keyhole design is identical across all JL trims. Q: Do these interfere with keyless entry or remote start?A: No. The covers only protect the physical keyhole. Your key fob proximity sensor, push-button start, keyless entry, and remote start all function normally with the covers installed. Q: Will they stay on at highway speeds?A: Yes, the high-strength magnet is engineered to hold securely at all driving speeds. Extensive testing confirms the covers stay in place even at 80+ MPH and on rough off-road terrain. Q: Do the covers cause any paint damage?A: No. The magnet is rubber-coated to prevent scratching, and the silicone seal is paint-safe. The covers leave no residue when removed. Q: Can I paint or customize these covers?A: The surface can be painted with automotive-grade spray paint. Lightly sand with 800-grit paper, apply plastic adhesion promoter, then paint in thin coats. Allow 24 hours to fully cure before installation. Q: Do these work on the tailgate lock?A: These covers are designed for the front door keyholes. The tailgate keyhole is a different shape and these covers may not fit properly. Q: Will they freeze to the lock in winter?A: The silicone gasket creates a barrier that prevents moisture from reaching the keyhole, actually reducing the chance of freezing compared to an uncovered lock. In extreme ice conditions, gently warm the cover with your hand before removal.

Read more less

Manual Shifter Stop — Eliminate 1st/2nd Gear Slop in Your Subaru WRX The iFJF Red Anodized Manual Shifter Stop is a must-have upgrade for every 2015-2021 Subaru WRX owner. Factory shifter assemblies have excessive side-to-side play in the 1-2 gate, creating a vague, rubbery feel that undermines the precision of your manual transmission. This CNC-machined billet aluminum stop eliminates that slop completely for crisp, rifle-bolt shift action. Key Features Eliminates 1st/2nd Gear Slop — The single most effective shifter upgrade for the VA-chassis WRX. Transforms vague factory shifting into precise, mechanical engagement. CNC Billet 6061-T6 Aluminum — Precision machined from aerospace-grade aluminum for exact dimensional tolerance and long-term durability. Red Anodized Finish — Hard anodized coating resists scratching, fading, and corrosion while adding a subtle performance look under the shift boot. 10-Minute Installation — No transmission work required. Simply remove the shift boot trim, bolt the stop in place using factory hardware, and adjust for perfect alignment. Compatible with Short Shifters — Works with OEM Subaru short shifter, Cobb, Boomba, Kartboy, and other aftermarket short-throw kits. Compatibility Make Model Years Subaru WRX (VA Chassis) 2015-2021 Subaru Legacy / Outback 2010-2014 Subaru Forester 2014 Only compatible with 6-speed manual transmissions. Does NOT fit CVT (automatic) models. Specifications Material 6061-T6 Billet Aluminum Finish Red Hard Anodized Manufacturing CNC Precision Machined Installation Time 10-15 Minutes Tools Required 10mm Socket, Flathead Screwdriver, Trim Tool Installation Overview Pull up on the shift boot surround to release the retaining clips. Remove the factory rubber shift boot cover to expose the shifter assembly. Locate the 1st/2nd gear side stop — it's on the driver's side of the shifter base. Remove the factory plastic stop (two 10mm bolts). Install the iFJF billet stop in the same position. Snug the bolts but leave them slightly loose for adjustment. Shift into 1st gear. Slide the stop until it gently contacts the shifter lever, then back it off 0.5mm. Tighten bolts to 8-10 ft-lbs. Test 1st and 2nd gear engagement before reinstalling the boot and trim. Frequently Asked Questions Will this fix my notchy 2nd gear? The shifter stop eliminates side-to-side play, which improves the overall feel and precision of the 1-2 shift gate. However, if your 2nd gear is grinding or popping out, you may have a synchro issue — the stop won't fix internal transmission problems. Does this work with the factory short-throw shifter? Yes — the iFJF Shifter Stop is fully compatible with the Subaru OEM short-throw shifter (STI Performance Package or dealer-installed option) as well as popular aftermarket short shifters from Cobb, Boomba, and Kartboy. Will this void my warranty? This is an external bolt-on part that doesn't modify the transmission or shifter linkage. It should not affect your warranty coverage, though dealers may vary in their interpretation. Remove before dealer visits if you're concerned. Is the red finish the only color option? This listing is for the Red Anodized version. The anodizing is Type II hard coat — it won't fade or chip under normal use inside the shift boot area. How does this compare to a full short shifter? A short shifter reduces throw distance (how far the lever moves). The shifter stop reduces side-to-side slop (how much the lever wiggles in gear). They address different aspects of shift feel — many enthusiasts run both for the ultimate setup.

Read more less

Product Overview Marine Electric Choke for Mercruiser 2-Barrel MerCarb 4.3L V6 70125A-1. Engineered for reliable performance and precision fitment, this iFJF aftermarket part meets or exceeds OEM specifications for durability and function. Ideal for DIY mechanics and professional technicians alike. Key Features Direct OEM Replacement: Engineered to match original Mercruiser MerCarb 2-barrel specifications exactly. Electric Choke Operation: Automatic temperature-controlled choke for reliable cold starts every time. Marine-Grade Construction: Corrosion-resistant materials designed for harsh marine environments. Plug-and-Play Installation: Pre-calibrated from factory — bolt on and go. Compatibility Year Make Model Engine/Notes See Description Marine Electric Choke for Mercruiser 2-Barrel MerC Direct Fit ⚠️ Always verify fitment with your specific vehicle year, make, model, and engine before ordering. Contact our support team for compatibility questions. Specifications Specification Value Brand iFJF Product Type Marine Carburetor Parts SKU FJ-CRRK-7665-4.3 Price $49.99 USD Type Electric Choke Application Marine — Mercruiser MerCarb 2-Barrel Why Choose iFJF? Quality Assurance: Every iFJF part undergoes rigorous quality inspection before shipping. Precision Engineering: Manufactured to tight tolerances for guaranteed fitment. Expert Support: Our team of diesel and automotive specialists is ready to help with any questions. Fast Shipping: Orders ship within 1-2 business days from our US warehouses. Frequently Asked Questions Q: Is this compatible with my Mercruiser engine?A: This electric choke is designed for Mercruiser MerCarb 2-barrel carburetors commonly found on 3.0L 4-cylinder and 4.3L V6 marine engines. Verify your carburetor model number before ordering. Q: How does an electric choke work?A: The electric choke uses a bi-metallic spring heated by 12V current. When cold, the spring holds the choke plate closed for rich starting mixture. As it heats up (30-90 seconds), the spring expands and opens the choke plate for normal running. Q: What are symptoms of a bad electric choke?A: Hard cold starts requiring excessive cranking, engine stalling when cold, black exhaust smoke (overly rich), poor fuel economy, and choke plate not opening fully after warm-up. Order your Marine Electric Choke today — fast shipping, expert support, and the quality you can trust from iFJF Direct. 📖 Related Guides & Articles 🔗 Marine Fuel Water Separator Guide: Why Your Outboard Needs One 🔗 How to Rebuild Edelbrock 1406 and 1405 Carburetors 🔍 Explore More Parts Looking for compatible parts? Browse our full selection of Marine Carburetor Parts for your vehicle or equipment. iFJF Direct offers quality aftermarket parts with fast shipping.

Read more less

Marine-Grade Fuel Water Separator — Protect Your Engine, Save on Maintenance R12H Marine Fuel Water Separator — 10 Micron, 15 GPH, Aluminum Alloy, Replaces Racor S3240 / 120AT, NPT ZG1/4-19. Upgraded detachable filter element design: replace only the cartridge, keep the housing — saves up to 60% vs. disposable units. Complete kit includes aluminum housing, 3 filter elements, 4 O-rings, 2 inlet/outlet fittings, and 2 plugs. Key Features Detachable Spin-On Design — Replace only the filter element, not the entire unit. Quick tool-free cartridge swaps. Aluminum Alloy Body + Powder Coating — Superior corrosion resistance against seawater and harsh marine environments. Built to outlast iron/steel alternatives. 15 GPH High Flow Rate — Engineered for high-performance marine and diesel applications. Maintains fuel pressure under load. 10-Micron Advanced Filtration — High-capacity filter media removes water and particles as small as 10 microns for clean, water-free fuel delivery. Transparent Nylon Collection Bowl with Drain Valve — Visually inspect water accumulation and drain with a simple twist of the black valve. What's Included (Complete Combo) 1 x R12H Fuel Water Separator Assembly (aluminum housing + base) 3 x Filter Elements (1 installed + 2 bonus spares) 4 x O-Rings (2 installed + 2 bonus spares) 2 x NPT/ZG1/4-19 Connection Fittings 2 x Plugs for unused ports Installation Instructions Specifications Model R12H (R12T Upgrade) Material Aluminum Alloy + Powder Coating Flow Rate 15 GPH (57 LPH) Filtration 10 Micron Port Size NPT / ZG1/4-19 Filter Type Spin-On, Replaceable Cartridge Replaces Part # S3240, 120AT, 18-7987, RK10222, R12T Applications Marine boats, diesel trucks, generators, oil storage equipment Easy Installation — No Professional Tools Required (Boats) Designed for DIY boat owners. Comes with detailed step-by-step instructions: Apply fuel to both O-rings for lubrication before assembly Mount the unit securely — use screws on a wood board (min 1cm) with marine adhesive if you prefer not to drill into your boat Fill the filter housing completely with fuel before starting the engine to prevent air-lock Periodically check the collection bowl and drain accumulated water via the drain valve For automotive/diesel truck installation, professional installation is recommended. Frequently Asked Questions Q: What is the difference between R12H and R12T?A: The R12T has a sealed, non-removable filter element — you must replace the entire housing. The R12H has a detachable cartridge: keep the housing, replace only the internal filter, saving you money every service. Q: Will this fit my boat?A: As long as you have sufficient mounting space, it works for boats, cars, diesel trucks, and fuel storage equipment. Ports: NPT/ZG1/4-19. Q: Why won't my engine start after installation?A: You must fill the filter housing completely with fuel before starting. An empty filter causes air-lock and starting failure. Q: How often should I replace the filter element?A: Every 100 hours of operation or annually, whichever comes first. Check the transparent bowl regularly for water accumulation. Q: Is this compatible with Racor / Sierra / Yamaha systems?A: This replaces S3240 and 120AT filter elements commonly used across marine brands. Verify your port size (NPT/ZG1/4-19) and mounting space before ordering. WHOLESALE INQUIRIES Bulk pricing available for marine dealers, fleet operators, and distributors. Contact us for wholesale discounts. R12T Fuel Filter Water Separator Complete Combo Kit → 📦 Related Products & Guides 🛒 Complete Your System: R12H Replacement Filter Element (from $13.99) — Drop-in replacement cartridge for this assembly R12T Combo Kit ($29.99) — Compare: our economy sealed-unit option R12T Replacement Filter Element ($17.99) — Compatible spin-on cartridge R12T Clear Nylon Collection Bowl ($13.99) — Replacement drain bowl (also fits R12H) 📖 Related Guides: R12T vs R12H: Real Customer Review (20K+ Views) R12T vs Racor 120AT vs WIX 33583 Showdown R12T Marine Installation Guide: NPT & ZG Fittings 📦 Related Products & Guides 🛒 Complete Your System: R12H Replacement Filter Element (from $13.99) — Drop-in replacement cartridge for this assembly R12T Combo Kit ($29.99) — Compare: our economy sealed-unit option R12T Replacement Filter Element ($17.99) — Compatible spin-on cartridge R12T Clear Nylon Collection Bowl ($13.99) — Replacement drain bowl (also fits R12H) 📖 Related Guides: R12T vs R12H: Real Customer Review (20K+ Views) R12T vs Racor 120AT vs WIX 33583 Showdown R12T Marine Installation Guide: NPT & ZG Fittings Related Guide Read: RV VacuFlush Toilet Bowl Seal Replacement: Fix That Leak and Stop the Constant Pump Cycling Related Guide Read: 245R Diesel Fuel Water Separator Replacement: R25T WK940/38X Swap in Under an Hour

Read more less

Product Overview The iFJF Marine Outboard Fuel Line Hose Kit is a complete, ready-to-install fuel delivery system for your outboard motor. This 5/16" ID fuel line kit includes everything you need: 10 feet of premium UV-resistant marine-grade hose, a high-flow primer bulb, and quick-connect fittings compatible with Mercury, Yamaha, Johnson, Evinrude, Suzuki, and Honda outboards from 4HP to 200HP. Key Features Complete Kit: Includes 10ft of 5/16" fuel hose, primer bulb, female tank connector, and male engine connector — everything for a full fuel line replacement UV-Resistant Marine Hose: Multi-layer construction with UV inhibitors prevents cracking, hardening, and degradation from sun exposure Ethanol-Safe: Inner liner is fully compatible with E10 ethanol-blended fuels — won't delaminate or swell like inferior hoses High-Flow Primer Bulb: Large-volume bulb with premium check valves ensures quick, reliable priming even after long storage periods Universal Compatibility: Fits Mercury, Yamaha, Johnson/Evinrude, Suzuki, and Honda outboards 4HP-200HP with standard 5/16" connections Compatibility Make Engine Type HP Range Connection Type Mercury / Mariner 2-Stroke & 4-Stroke 4HP — 200HP Quick-Connect (Female Tank / Male Engine) Yamaha 2-Stroke & 4-Stroke 4HP — 200HP Quick-Connect (Female Tank / Male Engine) Johnson / Evinrude 2-Stroke & 4-Stroke 4HP — 200HP Quick-Connect (Female Tank / Male Engine) Suzuki 4-Stroke 4HP — 200HP Quick-Connect (Female Tank / Male Engine) Honda 4-Stroke 2HP — 200HP Quick-Connect (Female Tank / Male Engine) Specifications Specification Value Hose Inner Diameter 5/16" (8mm) Hose Length 10 Feet (3m) Material Multi-layer reinforced rubber with UV inhibitor Primer Bulb High-flow with stainless steel check valves Connectors Brass/Stainless quick-connect (Female Tank + Male Engine) OEM Cross Reference Mercury 32-858104K08, Yamaha MAR-FUEL-LN-01 Why Choose iFJF Marine Fuel Lines A cracked or leaking fuel line is a safety hazard and the most common cause of outboard starting issues on the water. Old fuel lines deteriorate from ethanol exposure, UV radiation, and age — causing air leaks that prevent the primer bulb from building pressure. Our marine fuel line kit replaces your entire fuel delivery path with fresh, ethanol-resistant components that ensure reliable starting and smooth running all season long. Frequently Asked Questions Q: How do I know if I need a 5/16" or 3/8" fuel line?A: Most outboards from 4HP to 200HP use 5/16" fuel line. Engines above 200HP or with V6/V8 configurations may require 3/8". Check your existing fuel line or owner's manual to confirm. 5/16" is the standard for the vast majority of recreational outboards. Q: Can I use this with a built-in fuel tank?A: This kit is primarily designed for portable fuel tank setups. For built-in tanks, you may need additional fittings. The connectors in this kit use standard Mercury/Yamaha-style quick-connect fittings. Q: Is this fuel line ethanol-safe?A: Yes. Our multi-layer fuel hose features a specially formulated inner liner that resists the corrosive effects of ethanol-blended fuels (E10). Unlike older rubber hoses that can delaminate and clog carburetors, this hose is designed for modern fuel formulations. Q: How do I prime the fuel system with the primer bulb?A: Squeeze the primer bulb repeatedly until it becomes firm (usually 5-10 squeezes). The bulb should remain firm — if it stays soft or collapses, check for air leaks in the connections or a stuck anti-siphon valve on your fuel tank. Q: Should I disconnect the fuel line when storing my boat?A: Yes. For long-term storage, disconnect the fuel line and run the engine until it stalls to clear fuel from the carburetor. This prevents varnish buildup that can clog jets and passages. Related Products Complete your marine fuel system: R12T Marine Fuel Water Separator Element S3213 Marine Fuel Water Separator Filter 802893Q01 Fuel Water Separator Kit for Marine

Read more less

Product Overview When the touchpad on your Speed Queen or Huebsch dryer stops responding — requiring excessive force, phantom-pressing random cycles, or going completely dead — this exact-replacement membrane switch restores full functionality. Compatible with both commercial (laundromat) and residential Speed Queen/Huebsch dryers, this touchpad replaces part numbers 511867, 510034, and 510036. It's a true plug-and-play installation requiring no programming, calibration, or modification — simply connect the ribbon cable, peel the adhesive backing, and press into place. Key Features Exact OEM-Style Replacement — Same button layout, same tactile response, same ribbon cable connector. Designed to look and function identically to the original Speed Queen/Huebsch touchpad. Plug-and-Play Installation — No programming, no calibration, no software updates required. Unplug the old touchpad ribbon cable, plug in the new one, and you're done. The dryer's control board recognizes it immediately. Durable Sealed Membrane Construction — Fully sealed against moisture, lint, dust, and laundry chemicals. The membrane design prevents the common failure mode where debris gets under individual mechanical buttons. Multi-Part Number Coverage — One touchpad replaces multiple Speed Queen and Huebsch part numbers (511867, 510034, 510036), simplifying inventory for laundromat owners and multi-unit property managers. Clear, Fade-Resistant Graphics — Button labels are printed with UV-resistant ink that won't fade or wear off, maintaining legibility through years of heavy use. Compatibility / Fitment Brand Type Part Numbers Replaced Speed Queen Commercial & Residential Dryers 511867, 510034, 510036 Huebsch Commercial & Residential Dryers 511867, 510034 Technical Specifications Specification Value Part Numbers 511867, 510034, 510036 Switch Type Membrane (Sealed) Installation Plug-and-Play (No Programming) Connection Ribbon Cable with OEM Connector Application Speed Queen / Huebsch Electric & Gas Dryers Why Choose This Speed Queen dryers are known for lasting 20+ years — but the touchpad is a common wear point, especially in commercial laundromat settings with hundreds of cycles per day. A service call to replace this $28 part typically costs $150-250. As a DIY repair, it takes about 20 minutes and requires only a Phillips screwdriver. For laundromat owners, keeping a spare touchpad on hand means zero downtime when a unit goes down — swap it in minutes and get the dryer back earning revenue. For homeowners, it restores your Speed Queen's legendary reliability at minimal cost. Related Products 3949238 Washer Lid Switch — For Whirlpool/Kenmore top-load washers Browse all Appliance Parts — Washer and dryer components Shop All iFJF Parts — Complete inventory Frequently Asked Questions Q: How do I know if my touchpad is bad?A: Common signs of failure: buttons require excessive force to register, phantom presses (dryer starts/changes cycles on its own), certain buttons stop working while others function, display flickers or goes blank, or the touchpad is completely unresponsive. If the dryer powers on but won't respond to button input, the touchpad is the most likely cause. Q: Does this need any programming or setup?A: No — pure plug-and-play. The dryer's control board automatically recognizes the new touchpad. Simply connect the ribbon cable and reassemble. No software, no calibration, no technician required. Q: What's the difference between part numbers 511867, 510034, and 510036?A: Functionally, they're identical. 511867 is the original part number. 510034 and 510036 are revised/updated part numbers for the same assembly, with minor manufacturing improvements but the same fit and function. This touchpad replaces all three. Q: Will this fit my specific Speed Queen model?A: Compatible with most Speed Queen and Huebsch electric and gas dryers that use a membrane touchpad control panel. Check your dryer's service manual or look for the existing part number on the back of the current touchpad before ordering. Q: How long does installation take?A: 20-30 minutes for a DIY installation. Steps: unplug the dryer, remove the top panel or control panel cover (typically 2-4 screws), disconnect the ribbon cable from the old touchpad, remove the old touchpad (it may be adhered — use a plastic scraper if needed), clean the mounting surface thoroughly, connect the new touchpad cable, peel the adhesive backing, press the new touchpad into place, reassemble, and test. Q: Is this for commercial laundromat dryers too?A: Yes — this touchpad works in both commercial (laundromat/coin-op) and residential Speed Queen and Huebsch dryers that use this control panel design. The membrane construction is rated for high-cycle-count commercial use. Order with Confidence Fast shipping from our US warehouse. Dedicated customer support team ready to answer your questions. Click Add to Cart to get your order started today. Related Guides & Articles Check out these helpful resources from the iFJF blog: Pool Filter Maintenance — Pool Filter Maintenance Guide — Replacement Tips

Read more less