Products

Mercarb 2-BBL Carburetor Rebuild Kit — Mercury Marine 3.0L / 4.3L / 5.0L / 5.7L Get your boat running smoothly again with the iFJF Mercarb 2-BBL Carburetor Rebuild Kit. This comprehensive kit fits all Mercury Marine Mercarb 2-barrel carburetors used on 3.0L, 4.3L, 5.0L, and 5.7L stern drive and inboard engines. Includes everything you need — gaskets, float, needle and seat, accelerator pump, and all internal seals. Key Features Float Included: Unlike most "economy" kits, this one includes the float — the most common failure point on marine carbs Complete Rebuild Kit: All gaskets, seals, accelerator pump, needle/seat, and float included Marine-Grade Materials: Ethanol-resistant gaskets and seals designed for marine fuel environments Broad Compatibility: Fits all Mercarb 2-barrel carbs across 3.0L, 4.3L, 5.0L, and 5.7L applications Plug & Play: All components manufactured to exact Mercarb specifications Compatibility Engine Carburetor Applications 3.0L (181 CID) Mercarb 2-BBL Mercruiser Alpha One, Gen II stern drives 4.3L V6 (262 CID) Mercarb 2-BBL Mercruiser V6 stern drives 5.0L V8 (305 CID) Mercarb 2-BBL Mercruiser V8 stern drives 5.7L V8 (350 CID) Mercarb 2-BBL Mercruiser V8 stern drives (pre-MPI) Replaces Part Numbers Mercury Marine 3302-804844002 Mercury Marine 1389-9562A1 Mercury 3310-861448A1, 864940A01, 864941A01 Mercury 3310-864942A01, 864943A01, 866140A02 Mercury 3310-866141A02, 866142A03 Sierra 18-7097 Mallory 9-37600 Kit Contents Component Quantity Float 1 Needle & Seat Assembly 1 Accelerator Pump Assembly 1 Fuel Bowl Gasket 1 Top Cover Gasket 1 Base Gasket 1 O-Ring & Seal Set Complete Mounting Hardware & Clips As Required Why Rebuild Your Mercarb? Ethanol Damage: Ethanol-blended fuels deteriorate older gaskets and seals — this kit uses ethanol-resistant materials Sinking Float: A fuel-logged float causes flooding and hard starting — this kit includes a fresh float Bog on Acceleration: A worn accelerator pump causes hesitation when you throttle up from idle Fuel in the Bilge: Leaking bowl gaskets are a fire hazard on boats — rebuild for safety Frequently Asked Questions Q: Will this fit my Mercruiser 3.0L?A: Yes, this kit fits all Mercarb 2-barrel carburetors on Mercury Marine 3.0L through 5.7L stern drive and inboard engines. Q: Does it come with a float?A: Yes! Unlike many "budget" kits, this one includes the float — a critical component on marine carburetors. Q: Is this for a 2-barrel or 4-barrel carb?A: This is for the Mercarb 2-barrel (2-BBL) carburetor. If you have a Quadrajet or Weber 4-barrel, you'll need a different kit. Q: Does it work with ethanol fuel?A: Yes, the gaskets and seals in this kit are ethanol-resistant — suitable for E10 fuels commonly found at marinas. Q: Do I need any special tools?A: Basic hand tools are sufficient. A carburetor cleaning dip and compressed air are recommended for cleaning passages before reassembly. Related Products Explore more products from our Carburetors & Fuel System collection: All Carburetors & Fuel System — Browse our complete selection Fuel Filters & Water Separators — Protect your fuel system Oil Filters — Premium filtration for diesel engines

Read more less

Product Overview The Mercedes-Benz E300 W210 S210 OM606 3.0 TD Engine OM606 EGR Exhaust Gas circulation valve removal tube is a high-quality replacement part built to exacting standards. Whether you're performing routine maintenance or a complete overhaul, this component provides the fit, finish, and reliability you expect from iFJF Direct. Key Features Precision-Engineered Fit: Manufactured to tight tolerances for a direct, hassle-free installation — no modifications required. Premium Materials: Constructed from high-grade materials that resist wear, corrosion, and fatigue for extended service life. OEM-Spec Performance: Designed to match or exceed original equipment specifications for consistent, dependable operation. Complete Package: Includes all necessary components for a professional-grade installation (verify contents in product images). Quality-Assured: Each unit undergoes rigorous inspection before shipping to ensure you receive a flawless product. Compatibility This replacement part is engineered for broad compatibility. Please check your equipment's part number against the listing to ensure proper fitment. Contact our support team if you need assistance with compatibility verification. Specifications Specification Detail Product Type Replacement Part Brand iFJF Condition New Fitment Direct Replacement Cross-Reference OM606, OM606 Why Choose iFJF Direct? Fast, Reliable Shipping: Orders processed within 1 business day from our US warehouses. Expert Support: Our team knows diesel, automotive, and powersports parts inside and out. Quality Guarantee: Every iFJF part is backed by our satisfaction promise. Trusted by Pros & DIYers: Thousands of technicians and home mechanics rely on iFJF parts daily. Installation Tips Always consult your vehicle or equipment service manual before beginning installation. Clean all mounting surfaces thoroughly before installing the new replacement part. Compare the new part side-by-side with the old one to verify correct fitment. Use the proper tools and torque specifications as recommended by the manufacturer. If you encounter any issues, contact iFJF support for assistance. Frequently Asked Questions Q: Will this part fit my vehicle?A: This replacement part is designed for Mercedes (Various). Please verify your specific year, make, model, and engine configuration matches. Contact our support team with your VIN or serial number if unsure. Q: Is this OEM or aftermarket?A: This is a high-quality aftermarket replacement replacement part manufactured to meet or exceed OEM specifications at a fraction of dealer cost. Q: What's included in the package?A: The package includes the replacement part as shown in the product images. Please review all images for exact contents. Q: How long does shipping take?A: Most orders ship within 1 business day from our US warehouse. Standard delivery takes 3-7 business days. Expedited options available at checkout. Q: What is the return policy?A: 30-day return window for unused items in original packaging. Contact us immediately if you receive a defective or incorrect item.

Read more less

Product Overview Enjoy the open-air Wrangler life without the sunburn. This front mesh sun shade is custom-designed for 2007-2018 Jeep Wrangler JK and JKU models, providing essential UV protection and wind buffeting reduction for the driver and front passenger. The tightly-woven mesh fabric blocks harsh sunlight while keeping the breeze flowing the best of both worlds. Unlike flimsy universal shades, this one is contoured for the JK's unique windshield and roll bar geometry. The bungee attachment system keeps it taut even as your Jeep flexes on trails. Stays installed under your hard top or soft top no seasonal removal required. Key Features Custom JK Fit Contoured specifically for 2007-2018 Jeep Wrangler JK and JKU windshield and roll bar geometry. Not a universal fit. UV Ray Protection Dense mesh weave blocks the majority of harmful UV radiation, keeping the cabin cooler and protecting your interior. Wind Buffeting Reduction Disrupts the turbulent airflow that causes the thumping sensation in open-top Wranglers at speed. Top-Compatible Design Stays installed under hard top and soft top. No need to remove when the seasons change. Bungee Attachment System Quick installation with self-tensioning bungees. Flexes with the vehicle body and maintains tautness over time. Compatibility Year Make Model Doors 2007-2018 Jeep Wrangler JK 2-Door 2007-2018 Jeep Wrangler JKU 4-Door Unlimited Specifications Spec Value Coverage Front Section (Driver + Passenger) Material High-Density Mesh Fabric Attachment Bungee Cord System Top Compatibility Hard Top & Soft Top Frequently Asked Questions Q: Will this sun shade fit my 2015 Jeep Wrangler JK 2-door?A: Yes. Designed for 2007-2018 Wrangler JK (2-door) and JKU (4-door Unlimited). Bungee system adjusts to fit both body styles. Q: Is this a full-length shade or front only?A: This is a front-section shade covering the driver and passenger area. For full-length coverage (front + rear), a larger shade or two-piece system would be needed. Q: Can I leave the shade on with the soft top up?A: Yes. Fits under both hard top and soft top. Raise and lower your soft top without removing the sun shade. Q: Does this help with wind buffeting?A: Yes. The mesh disrupts the low-pressure zone causing the buffeting sensation. Significantly reduces it. Q: How long does installation take?A: First-time installation 15-20 minutes. Once you know the routing, removing and reinstalling takes about 5 minutes.

Read more less

Product Overview Enjoy open-air Jeep driving without the sunburn. This premium mesh sunshade top for 2018-2022 Jeep Wrangler JL and JLU blocks harsh UV rays, reduces wind buffeting, and keeps your interior cooler all while preserving that top-down freedom you bought a Wrangler for. Unlike cheap sunshades that sag, flap, and need to be removed every time you put the hard top back on, this shade is designed to stay in place year-round. The bungee attachment system holds it taut and allows the fabric to flex with the Jeep's body. Works with all factory tops and all JL trims including Sahara, Rubicon, Sport, and Sport S. Key Features Year-Round Installation Stays in place under your hard top or soft top. No need to remove and reinstall with the seasons. UV Protection (80-90%) Tightly-woven mesh blocks the majority of harmful UV rays. Keeps the cabin cooler and protects your interior from sun damage. Wind Noise Reduction Mesh fabric breaks up turbulent airflow that causes buffeting in open-top driving. More comfortable highway cruising. Bungee Attachment System Quick install in 10-15 minutes. Bungees flex with body movement no sagging, no flapping, no torn mounting points. All-Trim Compatible Fits JL 2-door and JLU 4-door in Sahara, Rubicon, Sport, and Sport S configurations. Compatibility Year Make Model Doors 2018-2022 Jeep Wrangler JL 2-Door 2018-2022 Jeep Wrangler JLU 4-Door Unlimited Specifications Spec Value Material High-Density Mesh Fabric UV Block Rate ~80-90% Attachment Bungee Cord System Top Compatibility Hard Top & Soft Top Frequently Asked Questions Q: Will this sunshade fit my 2021 Jeep Wrangler JL Unlimited?A: Yes. This mesh sunshade is designed for 2018-2022 JL (2-door) and JLU (4-door) including all trims. It fits under both hard and soft tops. Q: Can I leave this installed with the hard top on?A: Yes. The low-profile design clears all factory top mounting points. No need to remove and reinstall seasonally. Q: Does this actually reduce wind noise?A: Yes. The mesh breaks up turbulent airflow causing wind buffeting. Most users report noticeable reduction in buffeting and more comfortable open-air driving. Q: How much UV protection does it provide?A: The tightly-woven mesh blocks approximately 80-90% of UV rays. Keeps the cabin cooler and protects your interior from sun damage. Q: How do I install the sunshade?A: Bungee cord system with anchor points around the roll bar and windshield frame. 10-15 minutes, no tools required. Bungees allow flex without tearing.

Read more less

Product Overview Take the sting out of summer drives with this premium mesh sunshade for your 2018-2022 Jeep Wrangler JL or JLU. The tightly-woven mesh blocks harsh UV rays while allowing the open-air experience that makes Wrangler ownership special. Unlike sunshades that flap in the wind or need removal every time you put the top on, ours stays taut and stays put. The bungee attachment system keeps the shade tensioned properly as your Jeep's body flexes on trails and over bumps. No sagging, no flapping, no torn mounting points. Works with hard top, soft top, and Freedom panels install once and forget about it. Key Features Premium Mesh Fabric Blocks UV rays while allowing airflow. Keeps cabin cooler on hot days without trapping heat. Wind Buffeting Reduction Breaks up turbulent air that causes the dreaded Wrangler wind thump at highway speeds. Permanent Installation Stays in place under hard top, soft top, and Freedom panels. No seasonal removal needed. Bungee Tension System Self-adjusting tension that compensates for body flex and fabric stretch. No sagging over time. All JL Trims Fits 2-door JL and 4-door JLU in Sport, Sport S, Sahara, and Rubicon configurations. Compatibility Year Make Model Doors 2018-2022 Jeep Wrangler JL 2-Door 2018-2022 Jeep Wrangler JLU 4-Door Unlimited Specifications Spec Value Material High-Density Mesh Attachment Bungee Cord System Top Compatible Hard Top, Soft Top, Freedom Panels Frequently Asked Questions Q: What's the difference between this and the other JL sunshade?A: Both fit 2018-2022 JL/JLU. Same premium mesh and bungee system. Design and coverage pattern may vary slightly choose based on preferred look and color. Q: Will the sunshade sag over time?A: No. The bungee system maintains constant tension, automatically compensating for fabric stretch and body flex. Stays taut for years. Q: Can I take the freedom panels off with the shade installed?A: Yes. Remove and reinstall Freedom panels without touching the sunshade. It stays in place. Q: Does this work with aftermarket roll cages?A: Depends on cage design. Mounts to factory roll bar and windshield points. If your aftermarket cage uses same locations, it should work.

Read more less

Miter Saw Protractor Angle Finder — Precision Angle Measurement for Perfect Cuts Every Time Stop guessing at angles and wasting material on test cuts. The iFJF Miter Saw Protractor Angle Finder eliminates the math and the guesswork from your woodworking, trim carpentry, and construction projects. Simply place the protractor into any inside or outside corner, read the angle directly from the dual laser-engraved scales, and transfer that exact angle to your miter saw — no calculations, no conversion charts, no trial-and-error. The smooth pivot assembly holds position without slipping while you walk from the corner to the saw. At just 7 inches and 0.15 lbs, it fits in your tool belt or apron pocket and is always ready to work. No batteries, no calibration drift, no screens to crack — just accurate angle transfer, every time. Key Features Dual Laser-Engraved Scales: Precision-etched markings for both inside and outside angle readings. Unlike printed scales, laser engraving won't wear off after years of job site use. Direct Transfer Design: Set your miter saw to the exact angle shown on the protractor — no math, no compound angle tables, no "cut, test, adjust, repeat." Smooth Pivot with Positive Lock: Effortlessly adjusts to any angle from 0-180° and holds position firmly. No slipping while you walk from the corner to the saw. Durable High-Impact Construction: Tough polymer body withstands drops, job site dust, and daily tool bag abuse. Won't crack like brittle plastic alternatives. Compact 7-Inch Size: Fits in your tool belt, apron pocket, or the small compartment in your miter saw stand. Lightweight at just 0.15 lbs — no fatigue during extended use. No Batteries Required: Always ready — no dead batteries, no calibration drift, no fragile LCD screens. Pure mechanical reliability. Perfect For Carpentry & Trim: Crown molding, baseboards, window casings, chair rails, and wainscoting — especially outside corners on older homes where walls are never square. Plumbing: Pipe angle measurement for drainage slope verification, vent line routing, and fitting layout. Flooring: Laminate, hardwood, and tile at odd angles — bay windows, diagonal layouts, and irregular rooms. Metalworking: Angle verification for welding fixtures, fabrication layouts, and tube notching setups. DIY Home Projects: Shelving, picture frames, deck railing, and any project requiring precise angle transfer. How to Use Place the protractor into the corner you want to measure — inside or outside. Adjust the arms until they're flush with both surfaces. Read the angle directly from the dual laser-engraved scale (inside and outside readings). Transfer that angle directly to your miter saw's bevel or miter setting. Make your cut — perfect fit, first try. Specifications Specification Detail Material High-Impact Polymer Length 7 Inches Weight 0.15 lbs Measurement Range 0-180 Degrees Scales Dual Laser-Engraved (Inside & Outside) Power Source None Required — Mechanical Operation Why Choose iFJF? iFJF measuring tools are built for the real world — job sites, workshops, and garages where tools get dropped, dusty, and used hard. Our protractor uses laser-engraved scales that won't rub off like printed markings, and the smooth pivot mechanism maintains its hold after thousands of cycles. Backed by US-based support and fast shipping from our American warehouse. Related Products Cam Timing Belt Locking Tool Kit 40mm/44mm Wheel Bearing Greaser Tool for Polaris 410520 Rear Lowering Shackle for Chevy/GMC Frequently Asked Questions Q: Is this digital or analog?A: Analog protractor with dual laser-engraved scales. No batteries required — always ready when you are. No calibration to drift, no LCD to crack when dropped. Q: What's the measurement range?A: 0-180 degrees with dual scales for inside and outside angle measurement. Covers every angle you'll encounter in trim carpentry, woodworking, and construction. Q: Is it accurate enough for finish carpentry?A: Yes. The laser-engraved scales and smooth, slop-free pivot provide the precision needed for crown molding, baseboards, and other finish-grade trim work. Q: How does this compare to a digital angle finder?A: No batteries to die mid-job, no calibration to check, no fragile screens. The mechanical protractor is simpler, lighter, equally accurate for miter work, and always ready. Digital units offer resolution advantages for metal machining; for woodworking and trim, the analog protractor is more practical. Q: Can it measure both inside and outside corners?A: Yes. The dual scales provide direct readings for both inside corners and outside corners without any conversion math. Just place the protractor in the corner and read the appropriate scale. Q: Will the markings wear off over time?A: No. The scales are laser-engraved into the material, not printed or stickered. They won't rub off, fade, or peel even after years of heavy use in dusty, gritty job site conditions. 📚 Related Guides & Articles Complete Guide: How to Rebuild Edelbrock 1406 and 1405 Carburetors

Read more less

Product Overview The iFJF MIU802421 Fuel Filter is a direct-fit replacement for John Deere compact and utility tractors. Engineered for the demanding agricultural environment, this filter provides critical protection for your tractor's high-pressure common rail diesel injection system against water and particulate contamination. Each filter includes a replacement O-ring for a leak-free seal. Manufactured to IATF 16949 quality standards for reliable performance season after season. Key Features Precision Fit for Multiple John Deere Series: Direct replacement for 3E, 3R, 4M, and 4R series tractors including 3032E, 3033R, 3038E, 4044M, 4049R, and 4066R models. High-Efficiency Diesel Filtration: Removes water and microscopic contaminants from diesel fuel — essential for protecting modern common rail injectors from damage. O-Ring Included: Every filter comes with a fresh O-ring to ensure a perfect, leak-free seal during filter changes. Agricultural-Grade Durability: Built to withstand the dust, vibration, and temperature extremes of farm and field work. IATF 16949 Certified Manufacturing: Manufactured under the same quality management system used by major OEM suppliers. Model Compatibility Series Compatible Models 3E Series 3032E, 3036E, 3038E, 3039R 3R Series 3033R, 3038R 4M Series 4044M, 4052M, 4066M 4R Series 4044R, 4049R, 4052R, 4066R Specifications Specification Detail Part Number MIU802421 Application Diesel Fuel Filter O-Ring Included Certification IATF 16949 Filter Type Element (Cartridge Style) Maintenance Recommendations Replace the fuel filter every 400 hours of operation or annually, whichever comes first. For tractors operating in dusty conditions or using stored/bulk fuel, consider more frequent replacement every 200-300 hours. Always replace the O-ring with each filter change and prime the fuel system before starting the engine. Frequently Asked Questions Q: Will this fit my John Deere 3038E?A: Yes. The MIU802421 is the correct fuel filter for 3038E and other 3E/3R/4M/4R series tractors listed in the compatibility table above. Q: Does it come with the O-ring?A: Yes. A new O-ring is included with every filter to ensure a proper seal. Q: How often should I change this filter?A: Every 400 hours of operation or annually — whichever comes first. More frequently (200-300 hours) in dusty conditions or when using bulk fuel storage. Q: Is this for gasoline or diesel engines?A: Diesel only. This filter is designed for John Deere diesel engines using common rail fuel injection. Q: Can I install this myself?A: Yes, fuel filter replacement is a routine maintenance item. Clean the housing, replace the O-ring, install the new filter, and prime the system before starting. Q: Is this OEM quality?A: Yes. Manufactured to IATF 16949 standards — the same quality certification used by major automotive and equipment OEM suppliers. Related Products RE551507 Fuel Filter Element for John Deere RE551508 Fuel Filter Element for John Deere

Read more less

Product Overview Stop your dripping Moen shower faucet without replacing the entire expensive cartridge. The iFJF Moen 96988 Cartridge Repair Kit provides all internal wear components — seals, springs, O-rings, and stem assembly — to rebuild your existing Moen 1222 or 1222B Posi-Temp/Moentrol cartridge. If your shower handle is stiff to turn, won't hold temperature, or drips constantly, the internal seals have worn out — not the cartridge body. This kit restores smooth operation and leak-free performance at a fraction of the cost of a full cartridge replacement. Key Features Compatible with Moen 1222 & 1222B — Works with both the original Moen 1222 and the updated 1222B Posi-Temp cartridge — the most common single-handle tub/shower valve cartridges in North America. Complete Internal Rebuild — Kit includes all wear components: seals, springs, O-rings, internal stem assembly, and retaining hardware. Everything that wears out is replaced. Stops Drips & Leaks — New seals and O-rings eliminate water waste, prevent faucet dripping, and stop leaks from the handle area. Restores Smooth Handle Operation — Eliminates the stiff, hard-to-turn handle feel and temperature fluctuation that develop as internal seals wear and bind. Corrosion-Resistant Materials — All seals and components are made from durable, corrosion-resistant materials designed to handle hard water and daily use. DIY-Friendly — Requires only basic household tools. The full rebuild can be completed in 30-45 minutes by a moderately handy DIY homeowner. Compatibility / Fitment Brand Cartridge Type Valve Type Handle Style Moen 1222 Posi-Temp Single-Handle Pull-to-Turn Moen 1222B Posi-Temp (Updated) Single-Handle Pull-to-Turn How to identify: If your Moen shower handle pulls out to turn on the water and rotates left/right for temperature control, you have a Posi-Temp valve using the 1222/1222B cartridge. Technical Specifications Specification Value Kit Part Number 96988 Compatible Cartridges Moen 1222, 1222B Valve Type Posi-Temp Pressure-Balancing Kit Type Internal Rebuild (Does Not Replace Cartridge Body) Installation Time 30-45 Minutes (DIY) Why Choose This A brand-new Moen 1222B cartridge costs $50-70+ at hardware stores. In 90% of cases, it's only the internal seals and O-rings that wear out — the brass cartridge body itself is perfectly fine. This repair kit costs significantly less and delivers the same result: a drip-free, smoothly operating shower faucet. Moen cartridges are designed to be rebuildable; this kit uses that design feature to save you money. Plus, reusing your existing cartridge body means no risk of disturbing the valve body or plumbing connections behind the wall. Related Products 3949238 Washer Lid Switch — Appliances repair Browse all Plumbing Parts — Faucets, cartridges, and repair kits Shop All iFJF Parts — Complete product catalog Frequently Asked Questions Q: Does this replace the entire Moen 1222 cartridge?A: No — this is an internal rebuild kit. It replaces the wear components (seals, springs, O-rings, stem assembly) inside your existing cartridge. If your cartridge body itself is cracked, physically damaged, or heavily corroded, you need a complete replacement cartridge. Q: How do I know if I have a Moen 1222 or 1222B cartridge?A: If your Moen shower handle pulls out to turn on the water and rotates left/right for temperature control, you have a Posi-Temp valve with the 1222 or 1222B cartridge. Look for "Moen" on the escutcheon plate. The 1222B is the updated version — this kit works with both. Q: Will this stop my faucet from dripping?A: Yes — if the dripping is caused by worn internal seals and O-rings (which covers roughly 90% of Moen cartridge drip issues). The kit includes all the sealing components that degrade over time. Q: How difficult is the installation?A: Moderate DIY difficulty. You'll need basic tools (screwdrivers, pliers, Allen wrench). The critical step is removing the cartridge from the valve body — Moen makes a cartridge puller tool (sold separately) that simplifies this significantly. Watch a tutorial video before starting if you haven't opened a shower valve before. Q: What's the difference between 1222 and 1222B?A: The 1222B is the updated/revised version of the 1222 cartridge with minor design improvements. Both are physically interchangeable in the same valve body. This kit works with either version. Q: Do I need to shut off the main water supply?A: Yes. Turn off the water supply to the shower/tub before removing the cartridge. There is usually no individual shutoff for the shower — you'll need to shut off the main house water or the branch line serving that bathroom. Q: How long do Moen cartridge seals typically last?A: In areas with hard water, seals may start degrading in 5-8 years. With soft water, they can last 10-15 years. Signs of wear include: handle stiffness, difficulty maintaining temperature, water dripping from the spout, and leaks around the handle area. Order with Confidence Fast shipping from our US warehouse. Dedicated customer support team ready to answer your questions. Click Add to Cart to get your order started today. Related Guides & Articles Check out these helpful resources from the iFJF blog: Pool Plumbing — Above Ground Pool Plumbing Parts Explained Pool Maintenance — Pool Filter Maintenance Guide

Read more less

Product Overview The Motorcycle Baby Kids Safety Seat Strap Harness — Universal Fit Belt is a premium-quality aftermarket replacement part engineered for compatible years compatible vehicles diesel engines vehicles. Designed to meet or exceed OEM specifications, this delivers exceptional performance, durability, and reliability for compatible models owners who demand the best for their vehicles. Key Features Precision Engineering: Manufactured to exact OEM specifications using advanced CNC machining and rigorous quality control processes for perfect fitment every time. Premium Materials: Constructed from high-grade materials selected for maximum durability, corrosion resistance, and long service life under demanding conditions. Direct Fit Installation: Designed as a direct bolt-on replacement with no modifications required — simply remove the old part and install this one using basic hand tools. Quality Certified: Backed by IATF 16949 certified manufacturing standards, ensuring consistent quality and reliability across every unit produced. Comprehensive Warranty: Covered by iFJF's standard warranty against manufacturing defects, with dedicated customer support available to answer your questions. Compatibility Specification Details Vehicle Make compatible vehicles Vehicle Models compatible models Year Range compatible years Engine diesel engines Part Number Motorcycle Baby Kids Safety Seat Strap Harness — Universal Fit Belt Replaces OEM OEM specifications Why Choose iFJF Direct? At iFJF Direct, we specialize in providing diesel enthusiasts and professional mechanics with premium aftermarket parts that deliver genuine value. Every product we sell is carefully selected for quality, tested for performance, and backed by our commitment to customer satisfaction. Whether you're maintaining a daily driver, building a competition truck, or servicing a fleet, iFJF has the parts you need with the quality you can trust. Frequently Asked Questions Q: Will this fit my compatible years? A: This is specifically designed for compatible years compatible vehicles compatible models with the diesel engines. Always verify your vehicle's exact year, make, model, and engine specification match the compatibility information above before ordering. Q: Is professional installation required? A: Installation difficulty varies by vehicle and skill level. For most applications, this is a direct bolt-on replacement that can be completed with basic hand tools. We always recommend consulting a certified mechanic if you are unsure about any installation procedure. Q: What's included with my purchase? A: Your purchase includes the as shown. Please review the product images and description carefully. If additional hardware or gaskets are required for installation, they are included where noted. Q: What is your shipping and delivery policy? A: iFJF Direct offers fast worldwide shipping. Orders are typically processed within 1-2 business days. Shipping times vary by destination. Free shipping is available on qualifying orders. Contact our support team for specific delivery estimates to your location. Q: What warranty coverage do you provide? A: All iFJF products are warranted against manufacturing defects. Our warranty covers replacement or refund of defective products. Contact our support team with your order number to initiate a warranty claim. We pride ourselves on standing behind every product we sell. Order With Confidence When you order from iFJF Direct, you're getting more than just a — you're getting our commitment to quality, reliability, and customer satisfaction. Every product is backed by our warranty and supported by our knowledgeable customer service team. Order yours today and experience the iFJF difference! Related Guides & Articles Check out these helpful resources from the iFJF blog: Universal Tachometer — How to Install a Universal Tachometer in Your Vehicle

Read more less

Overview The iFJF Motorcycle Crank Case Splitter Separator Puller is a heavy-duty specialty tool designed to safely and efficiently separate crankcase halves during engine rebuilds, bottom-end service, and crankshaft replacement. Without a proper case splitter, mechanics risk damaging expensive engine cases by prying or hammering — an approach that can warp mating surfaces, crack aluminum castings, and ruin precision bearing bores. This professional-grade tool applies controlled, even pressure to separate cases cleanly, protecting your investment in expensive engine components. Compatible with most motorcycle, ATV, UTV, and small engine crankcases from major manufacturers including Honda, Yamaha, Kawasaki, Suzuki, KTM, and Harley-Davidson. Key Features Heavy-Duty Construction — Built from hardened steel components to withstand the forces required for stubborn, factory-sealed crankcases Even Pressure Distribution — Applies controlled force to prevent warping, cracking, or damage to precision-machined case mating surfaces Universal Compatibility — Works on most motorcycle, ATV, UTV, and small engine crankcases from all major manufacturers Protects Expensive Components — Eliminates the risk of prying damage that can ruin $500+ engine cases Professional-Grade Tool — Used by motorcycle mechanics and engine builders who demand reliable, repeatable results Ergonomic Design — Threaded drive mechanism provides smooth, controllable separation without sudden release Technical Specifications Specification Details Material Hardened Steel Components Application Motorcycle, ATV, UTV, Small Engine Crankcase Separation Compatible With Honda, Yamaha, Kawasaki, Suzuki, KTM, Harley-Davidson & Most 2-Stroke/4-Stroke Engines Drive Mechanism Threaded Bolt Drive — Smooth, Controlled Operation User Level Professional / Experienced DIY Mechanic Installation Guide Remove All Case Bolts — Ensure all crankcase bolts, including hidden ones behind clutch/stator covers, are completely removed Position Splitter — Mount the splitter tool to the designated case splitting bosses or reinforced mounting points Apply Even Pressure — Turn the drive bolt slowly and evenly to apply controlled separating force Monitor Separation — Watch the case parting line as the halves begin to separate; tap gently with a rubber mallet if needed to break the gasket seal Complete Separation — Once the gasket seal breaks, continue turning until the cases are fully separated FAQ Q: Do I really need a case splitter or can I just pry the cases apart?A: Never pry motorcycle crankcases apart with screwdrivers or pry bars! This is the #1 cause of damaged case mating surfaces, which leads to oil leaks and requires expensive case replacement or machine shop resurfacing. A proper case splitter applies even pressure and protects your engine investment. Q: Will this tool work on my specific motorcycle model?A: This universal case splitter works on the vast majority of motorcycle and ATV engines. It uses adjustable mounting arms to interface with case splitting bosses. Verify your engine has external case bosses or threaded mounting points accessible after removing peripheral components. Q: Can I use this for 2-stroke and 4-stroke engines?A: Yes. The tool works equally well on both 2-stroke and 4-stroke engines. The case separation principle is the same regardless of engine type. Q: Is this tool compatible with Harley-Davidson engines?A: Yes. The splitter works on Harley-Davidson Twin Cam and Evolution engine cases, as well as Sportster bottom ends. Verify mounting point clearance on your specific model. Q: What's the most common mistake when splitting cases?A: Forgetting to remove ALL case bolts — including hidden ones under the clutch basket, stator cover, oil pump, or inside the cylinder stud area. Double-check your factory service manual for the complete bolt removal sequence before using any splitter. Q: Do I need any other specialty tools for a bottom-end rebuild?A: A case splitter is essential, but you'll also likely need a flywheel puller (model-specific), crankcase assembly tool or crank puller for reassembly, torque wrench, and a factory service manual for your specific engine. Q: Can a beginner mechanic use this tool successfully?A: Yes, with the right preparation. The tool itself is straightforward to operate. The challenge is the engine disassembly required BEFORE case splitting. We strongly recommend having a factory service manual and watching model-specific teardown videos before attempting your first bottom-end rebuild. Q: Is heat needed to help separate stubborn cases?A: For extremely stubborn cases (common on engines that have never been opened), applying gentle heat with a heat gun around the case perimeter can help soften factory sealant. Never use an open flame. Combine heat with the case splitter's even mechanical pressure for best results. 📚 Related Guides & Articles iFJF Guides & Resources — Expert Tips, Installation Tutorials & Buying Guides

Read more less

Product Overview The Motorcycle Cruise Control with Silicone Ring Protect, Universal Throttle Assist Aluminum Wrist/Hand Grip Lock Clamp to fit Most Motorcycles is a high-quality replacement part built to exacting standards. Whether you're performing routine maintenance or a complete overhaul, this component provides the fit, finish, and reliability you expect from iFJF Direct. Key Features Precision-Engineered Fit: Manufactured to tight tolerances for a direct, hassle-free installation — no modifications required. Premium Materials: Constructed from high-grade materials that resist wear, corrosion, and fatigue for extended service life. OEM-Spec Performance: Designed to match or exceed original equipment specifications for consistent, dependable operation. Complete Package: Includes all necessary components for a professional-grade installation (verify contents in product images). Quality-Assured: Each unit undergoes rigorous inspection before shipping to ensure you receive a flawless product. Compatibility This replacement part is engineered for broad compatibility. Please check your equipment's part number against the listing to ensure proper fitment. Contact our support team if you need assistance with compatibility verification. Specifications Specification Detail Product Type Replacement Part Brand iFJF Condition New Fitment Direct Replacement Why Choose iFJF Direct? Fast, Reliable Shipping: Orders processed within 1 business day from our US warehouses. Expert Support: Our team knows diesel, automotive, and powersports parts inside and out. Quality Guarantee: Every iFJF part is backed by our satisfaction promise. Trusted by Pros & DIYers: Thousands of technicians and home mechanics rely on iFJF parts daily. Installation Tips Always consult your vehicle or equipment service manual before beginning installation. Clean all mounting surfaces thoroughly before installing the new replacement part. Compare the new part side-by-side with the old one to verify correct fitment. Use the proper tools and torque specifications as recommended by the manufacturer. If you encounter any issues, contact iFJF support for assistance. Frequently Asked Questions Q: Will this part fit my vehicle?A: This replacement part is designed for Various (Various). Please verify your specific year, make, model, and engine configuration matches. Contact our support team with your VIN or serial number if unsure. Q: Is this OEM or aftermarket?A: This is a high-quality aftermarket replacement replacement part manufactured to meet or exceed OEM specifications at a fraction of dealer cost. Q: What's included in the package?A: The package includes the replacement part as shown in the product images. Please review all images for exact contents. Q: How long does shipping take?A: Most orders ship within 1 business day from our US warehouse. Standard delivery takes 3-7 business days. Expedited options available at checkout. Q: What is the return policy?A: 30-day return window for unused items in original packaging. Contact us immediately if you receive a defective or incorrect item.

Read more less

Product Overview The MP10325 Fuel Filter & Lift Pump Assembly is a premium-grade replacement fuel filter assembly engineered to deliver OEM-level performance at an aftermarket price. Designed for Bobcat applications (Various), this component ensures your engine receives proper filtration for optimal performance and longevity. Cross-References: 228-9129, 232/5877, 804C-33, 804C-33T, 804D-33, 804D-33T, MP10325 Key Features & Benefits Superior Filtration: Advanced multi-layer media captures 99.9% of contaminants down to the rated micron level Maximum Fuel Flow: Engineered pleat design ensures unrestricted fuel delivery even under heavy load Corrosion-Resistant: Heavy-duty construction withstands diesel fuel additives and moisture Easy Installation: Direct fit replacement — no modifications needed for listed applications Quality Assured: Each unit undergoes rigorous quality control testing before shipment Vehicle Compatibility 📋 Cross-Reference Compatibility OEM Part Numbers 228-9129, 232/5877, 804C-33, 804C-33T, 804D-33, 804D-33T, MP10325 Fitment Years Various Vehicle Applications Bobcat Why Choose iFJF? At iFJF Direct, we specialize in providing diesel and heavy-duty vehicle owners with high-quality replacement parts at competitive prices. Our fuel filter assemblys are sourced from trusted manufacturers and backed by our commitment to quality and customer service. ✅ OEM-Spec Quality Without the OEM Price ✅ Fast Shipping from US Warehouses ✅ Dedicated Customer Support Team ✅ 30-Day Easy Returns Technical Specifications 📐 Technical Specifications Micron Rating 5-30 Micron (Application-Specific) Media Type High-Efficiency Cellulose/Synthetic Blend Water Separation ≥95% Efficiency (Where Applicable) Replacement Interval Per Vehicle Manufacturer Recommendations Package Includes 1x Fuel Filter Assembly (as shown in listing images) Frequently Asked QuestionsQ: How often should I replace this filter?A: For diesel engines, we recommend replacing it every 15,000-30,000 miles or every other oil change. Heavy-duty applications may require more frequent changes.Q: Will this fit my vehicle?A: Check the OEM part number cross-reference in the compatibility section. If your existing filter matches one of the listed part numbers, this filter fits.Q: What micron rating does this filter use?A: Manufactured to OEM specifications, typically 5-10 microns for diesel fuel systems.Q: Do you offer a warranty?A: Yes! All iFJF products come with our satisfaction guarantee. Contact us if you experience any issues. Q: How fast do you ship?A: Orders ship within 1-2 business days from our US warehouses. Typical delivery is 3-7 business days depending on your location.

Read more less

Product Overview The MP10326 Fuel Filter Element is a premium-grade replacement fuel filter engineered to deliver OEM-level performance at an aftermarket price. Designed for Ford, John Deere applications (2000+), this component ensures your engine receives proper filtration for optimal performance and longevity. Cross-References: 804C-33, 804C-33T, FS19917, MP10326, P551432, RE533026 Key Features & Benefits Superior Filtration: Advanced multi-layer media captures 99.9% of contaminants down to the rated micron level Maximum Fuel Flow: Engineered pleat design ensures unrestricted fuel delivery even under heavy load Corrosion-Resistant: Heavy-duty construction withstands diesel fuel additives and moisture Easy Installation: Direct fit replacement — no modifications needed for listed applications Quality Assured: Each unit undergoes rigorous quality control testing before shipment Vehicle Compatibility 📋 Cross-Reference Compatibility OEM Part Numbers 804C-33, 804C-33T, FS19917, MP10326, P551432, RE533026 Fitment Years 2000+ Vehicle Applications Ford, John Deere Why Choose iFJF? At iFJF Direct, we specialize in providing diesel and heavy-duty vehicle owners with high-quality replacement parts at competitive prices. Our fuel filters are sourced from trusted manufacturers and backed by our commitment to quality and customer service. ✅ OEM-Spec Quality Without the OEM Price ✅ Fast Shipping from US Warehouses ✅ Dedicated Customer Support Team ✅ 30-Day Easy Returns Technical Specifications 📐 Technical Specifications Micron Rating 5-30 Micron (Application-Specific) Media Type High-Efficiency Cellulose/Synthetic Blend Water Separation ≥95% Efficiency (Where Applicable) Replacement Interval Per Vehicle Manufacturer Recommendations Package Includes 1x Fuel Filter (as shown in listing images) Frequently Asked QuestionsQ: How often should I replace this filter?A: For diesel engines, we recommend replacing it every 15,000-30,000 miles or every other oil change. Heavy-duty applications may require more frequent changes.Q: Will this fit my vehicle?A: Check the OEM part number cross-reference in the compatibility section. If your existing filter matches one of the listed part numbers, this filter fits.Q: What micron rating does this filter use?A: Manufactured to OEM specifications, typically 5-10 microns for diesel fuel systems.Q: Do you offer a warranty?A: Yes! All iFJF products come with our satisfaction guarantee. Contact us if you experience any issues. Q: How fast do you ship?A: Orders ship within 1-2 business days from our US warehouses. Typical delivery is 3-7 business days depending on your location.

Read more less

Stop Your Multiport Valve from Leaking Water If water is leaking from your pool filter's waste line while in filter mode — or you're losing water through the backwash port — your multiport valve's spider gasket has failed. The iFJF SPX0715D Spider Gasket is a direct, precision-fit replacement for Hayward SP0715 and SP0716 series 2-inch multiport valves. Restore proper valve sealing in under 30 minutes. Signs Your Spider Gasket Needs Replacement Water continuously dripping from the waste/backwash line in filter mode Water bypass between positions — pool losing water unexpectedly Difficulty turning the valve handle — gasket binding Sand or DE returning to the pool through returns Gasket is flattened, cracked, or has missing spokes Compatibility — Exact Fit Brand Valve Model Size Hayward SP0715, SP0716 2-inch Hayward SP0714T variant (verify before purchase) 2-inch Replaces OEM part numbers: SPX0715D, SPX0715CA, SPX0715BA, SPX0716D Specifications Specification Detail Material Premium EPDM rubber — chlorine and chemical resistant Diameter Precision molded for SP0715/SP0716 2" valve Spoke Pattern 8-spoke design — matches OEM precisely Thickness OEM-equivalent — ensures proper compression seal Expected Lifespan 3-5 years under normal pool chemical conditions Installation — 4 Simple Steps Turn off the pump and relieve pressure. Remove the valve handle screws and lift off the handle assembly. Remove the old gasket — it sits in the groove on the underside of the valve diverter (key-seal assembly). Clean the groove thoroughly of all old adhesive and debris. Press the new gasket into the groove, aligning each spoke with its channel. No adhesive needed — the gasket seats in place. Reassemble the valve — align the handle, tighten screws evenly, and test all positions for smooth operation. Why Choose iFJF? Precision-molded — Every spoke and seal surface matches the OEM dimensions exactly Premium EPDM material — Resists chlorine, bromine, salt, and UV degradation Complete seal restoration — Eliminates water bypass between all valve positions No adhesive required — Friction-fit design stays in place during assembly Fraction of the cost — Same quality as OEM at a much better price Frequently Asked Questions Q: How do I know if this fits my Hayward valve?A: Check your valve label — it should say SP0715 or SP0716. This is a 2-inch valve gasket. Also measure your valve's plumbing connections — they should be 2-inch. Q: Do I need to use glue or adhesive to install this gasket?A: No. The gasket is designed to press-fit into the groove on the diverter assembly. Using adhesive can actually cause premature failure by binding the gasket. Q: Why does my new gasket fail so quickly?A: Common causes include: turning the valve handle while the pump is running (always turn off first), excessive chlorine levels, or the valve body being warped. Always stop the pump before changing valve positions. Q: Will this stop my filter from leaking out the waste line?A: Yes — a properly installed spider gasket seals the internal ports so water flows only through the selected position. Leaking from the waste line in filter mode is the classic symptom of a bad spider gasket. Q: How often should I replace the spider gasket?A: Under normal conditions, every 3-5 years. If you notice leaking or the handle becoming hard to turn, inspect the gasket. Regular lubrication of the gasket with silicone pool lube extends its life.

Read more less

No-Leak Aluminum Oil Change Funnel with Magnetic Dipstick — Clean Oil Changes for Honda Generators Oil changes on small inverter generators shouldn't mean oil all over your garage floor. The iFJF No-Leak Aluminum Oil Change Funnel threads directly into your Honda EU2000 generator's oil fill port for a spill-free oil change every time. Paired with the red magnetic-tip dipstick, this kit makes generator maintenance fast, clean, and frustration-free. Key Features Zero-Leak Threaded Connection — Precision-machined aluminum funnel threads directly into the oil fill port. No more balancing a plastic funnel while pouring — the tool does the holding for you. Aircraft-Grade 6061 Aluminum — Lightweight yet durable. Won't crack like plastic funnels and resists chemical degradation from engine oil. Red Anodized Finish — Easy to spot in a cluttered toolbox and wipes clean with a rag. The smooth anodized surface sheds oil quickly for fast drainage. Magnetic-Tip Dipstick Included — The red anodized dipstick features a magnetic tip that captures ferrous metal particles from your engine oil — providing an early warning system for abnormal engine wear. Generator Oil Change Complete Kit — Everything you need for clean, professional-grade oil changes on Honda inverter generators. Compatibility Brand Model Notes Honda EU2000i, EU2000i Companion Direct thread-in fitment Honda EU2200i Direct thread-in fitment (verify port threading) Predator 2000W Inverter May fit — verify oil port thread size WEN 56200i, 56225i May fit — verify oil port thread size Specifications Funnel Material 6061-T6 Billet Aluminum Funnel Finish Red Anodized Dipstick Material Aluminum with Magnetic Steel Tip Dipstick Finish Red Anodized Connection Type Threaded (screw-in) Kit Includes 1x Oil Funnel, 1x Magnetic Dipstick Why This Kit Beats a Plastic Funnel Hands-Free Operation — Thread the funnel in and pour with both hands. No holding, balancing, or cleaning up spills. Metal Over Plastic — Generators run hot and oil is warm during changes. Aluminum handles the heat; plastic warps. Magnetic Dipstick Early Warning — Metal particles on the dipstick tip = potential bearing or cylinder wear. Catch problems before they strand you without power. Professional Results — Clean oil changes mean you'll actually do them on schedule instead of putting it off to avoid the mess. Frequently Asked Questions Does this fit the Honda EU2200i? The funnel is designed for the Honda EU2000i oil fill port threading and should also fit the EU2200i. We recommend comparing your generator's oil port threading before ordering. Contact us if you're unsure. How do I clean the funnel after use? Wipe with a clean rag or paper towel. The smooth anodized surface sheds oil easily. For deep cleaning, use a mild degreaser. Do not use abrasive pads that could scratch the anodized finish. What should I look for on the magnetic dipstick? A thin dark film or fine metallic paste on the magnet is normal and expected — this is the magnet doing its job. Chunks, flakes, or shiny metal particles larger than a grain of sand indicate abnormal wear and warrant further engine inspection. Can I use this funnel for adding oil to other small engines? The threaded connection is specific to Honda EU-series generator oil ports. For other engines, the funnel can still be used as a conventional funnel (just hold it in place), but the threaded design won't lock onto non-threaded or differently-threaded ports. What oil should I use in my Honda generator? Honda recommends 10W-30 conventional or synthetic oil for most climates. Check your owner's manual — some models may specify different weights for extreme temperature operation. Change oil every 100 hours or annually, whichever comes first.

Read more less

Product Overview Keep your 3.0L EcoDiesel engine running clean and protected with the iFJF Oil Filter and Cap Assembly — a direct OEM-spec replacement for 2020-2021 Jeep Wrangler JL, Gladiator JT, and Ram 1500 DT models equipped with the 3.0L V6 diesel engine. This complete assembly includes both the high-efficiency filter element and the cap, ensuring a perfect seal and maximum filtration performance for your Gen 3 EcoDiesel. Key Features OEM-Spec Filtration Media: Multi-layer synthetic media captures 99% of contaminants as small as 25 microns, protecting your EcoDiesel's precision fuel system and turbocharger bearings from premature wear. Complete Assembly — Filter + Cap: Includes both the filter cartridge and cap, so you don't have to reuse a worn-out cap with degraded o-rings. One purchase, complete oil change. Direct Fit — No Modifications: Engineered to match the exact dimensions and thread pitch of the factory housing. Installs in minutes with basic hand tools. High-Capacity Design: Extended pleat surface area provides up to 10,000-mile service intervals under normal driving conditions (5,000 miles for severe duty). Compatible Part Numbers: Replaces OEM 68507598AA, 68498720AA. Compatibility Table Year Make Model Engine 2020-2021 Jeep Wrangler JL 3.0L EcoDiesel V6 2020-2021 Jeep Gladiator JT 3.0L EcoDiesel V6 2020-2021 Ram 1500 DT 3.0L EcoDiesel V6 Technical Specifications Specification Value OEM Part Numbers 68507598AA, 68498720AA Filter Type Cartridge (housing-style) Filtration Rating 25 micron (absolute) Material Synthetic blend media, composite cap Service Interval 7,500-10,000 miles (normal) Cap Thread Factory-matched Why Choose iFJF Oil Filters? The 3.0L EcoDiesel is a precision-engineered powerplant that demands premium filtration. Using a low-quality or worn-out oil filter can introduce contaminants that damage the high-pressure fuel pump, turbocharger, and bearing surfaces — repairs that can easily exceed $5,000. The iFJF oil filter and cap assembly provides OEM-level protection at a fraction of dealer pricing, giving you peace of mind every oil change. Frequently Asked Questions Q: Does this include the cap or just the filter?A: This is the complete assembly — both the filter cartridge AND the cap. If your old cap's o-ring is worn or the cap has been over-torqued, you get a fresh replacement included. Q: Will this fit a 2022 Jeep Wrangler EcoDiesel?A: This filter is specified for 2020-2021 models. 2022+ models may use a different filter housing design — please verify your OEM part number before ordering. Q: How often should I change the oil filter?A: Replace the filter with every oil change. For the EcoDiesel, we recommend 7,500-10,000 miles under normal conditions or 5,000 miles for severe duty (towing, off-roading, extreme temperatures). Q: Is this a genuine Mopar part?A: This is an OEM-spec aftermarket filter manufactured to meet or exceed Mopar specifications. It provides equivalent filtration performance for less. Q: What oil should I use with this filter?A: The Gen 3 EcoDiesel requires full synthetic 5W-40 diesel engine oil meeting API CK-4 or FCA MS-12991 specification. Call to Action Protect your EcoDiesel investment with proper filtration. Order the iFJF Oil Filter & Cap Assembly today with free shipping on orders $50+ across the USA. Related Products & Resources Shop All Oil Filters → Jeep Wrangler Parts & Accessories → Diesel Maintenance Guides →

Read more less

Onan RV Generator Complete Tune-Up Kit — All Filters + Spark Plug Keep your Onan RV generator running reliably with the iFJF Complete Tune-Up Kit. This all-in-one maintenance package includes everything you need for a full generator service: air filter, oil filter, fuel filter, and spark plug — all in one box at a fraction of OEM prices. What's Included 140-3116 Air Filter: High-capacity pleated paper element — traps dust and debris before they enter the combustion chamber 122-0836 Oil Filter: Full-flow spin-on lube filter with silicone anti-drainback valve 149-2341-01 Fuel Filter: Inline fuel filter with 10-micron filtration — protects the carburetor from fuel-borne contaminants 167-1638 Spark Plug: Pre-gapped copper-core spark plug for reliable ignition in all conditions Generator Compatibility Generator Series Models Onan QG Series 5500 (HGJAA, HGJAB), 7000 (HGJAD) Onan Marquis Gold 5500, 7000 RV QG Onan Marquis Platinum QG EFI models Why Regular Generator Maintenance Matters RV generators sit unused for months, then are expected to perform flawlessly during camping season. Stale fuel, moisture accumulation, and oil degradation are real threats. A dirty air filter reduces power output and increases fuel consumption. An old oil filter can't protect against sludge buildup. A worn spark plug causes hard starts and misfires. This kit addresses all three at once — recommended every 100 hours or annually, whichever comes first. Installation Tips Oil Change: Run the generator for 5 minutes to warm the oil, then drain and replace the filter. Use SAE 15W-40 diesel-rated oil (approximately 1.6 quarts for QG 5500, 2.0 quarts for QG 7000) Air Filter: Simply unscrew the air cleaner cover, remove the old element, and drop in the new one Fuel Filter: Pinch the fuel line before removing the old filter to minimize fuel spillage. Arrow on the new filter points toward the carburetor Spark Plug: Gap should be 0.030" (0.76mm). Torque to 15 ft-lbs After Service: Run the generator under load for 15 minutes to verify everything is working FAQ Q: Will this kit work for my Onan 4000 MicroQuiet?A: No. This kit is specifically for QG 5500/7000 and Marquis Gold series. The MicroQuiet 4000 uses different part numbers. Q: How often should I perform this tune-up?A: Every 100 hours of generator run time, or at least once per year before camping season. If you use your generator frequently in dusty conditions, consider more frequent air filter changes. Q: Are these genuine Onan/Cummins parts?A: These are premium aftermarket replacements manufactured to meet or exceed OEM specifications. Cross-reference: Cummins Onan 140-3116, 122-0836, 149-2341-01, 167-1638. Q: Does this include the oil?A: No. Oil is sold separately. We recommend SAE 15W-40 diesel-rated oil for optimal performance. Q: Is this kit compatible with propane (LP) generators?A: The air filter, oil filter, and spark plug are compatible. The fuel filter is for gasoline models only — LP generators don't use an inline fuel filter.Related Products Fuel Filter Housing for 2005-2013 Duramax 6.6L — 2500HD/3500HD 29531007 GMC, Ram 6.6L 2500HD, Duramax, Sierra, 2500, Silverado U58/9KIT Car Urea Filter Diesel Fuel Filter for A0001421089 2265672 2655824 1421 122-0833 Oil Filter for Cummins Onan RV Generator QD 3200 6000 8000 10000 12500 140-2897 Air Filter 3-Pack for Onan QD/HQD Generator Series 📖 Related Guide 122-0836 Oil Filter Buying Guide & Cross-Reference — Complete compatibility list, price comparison, and DIY oil change walkthrough for Onan QG 5500/7000 generators.

Read more less

Product Overview The OR2546 Carburetor Carb Complete Master Repair Rebuild Kit CRF100 F 04-05 XR100 R 01-03 is a high-quality replacement part built to exacting standards. Whether you're performing routine maintenance or a complete overhaul, this component provides the fit, finish, and reliability you expect from iFJF Direct. Key Features Precision-Engineered Fit: Manufactured to tight tolerances for a direct, hassle-free installation — no modifications required. Premium Materials: Constructed from high-grade materials that resist wear, corrosion, and fatigue for extended service life. OEM-Spec Performance: Designed to match or exceed original equipment specifications for consistent, dependable operation. Complete Package: Includes all necessary components for a professional-grade installation (verify contents in product images). Quality-Assured: Each unit undergoes rigorous inspection before shipping to ensure you receive a flawless product. Compatibility This replacement part is engineered for broad compatibility. Please check your equipment's part number against the listing to ensure proper fitment. Contact our support team if you need assistance with compatibility verification. Specifications Specification Detail Product Type Replacement Part Brand iFJF Condition New Fitment Direct Replacement Cross-Reference OR2546, CRF100, XR100 Why Choose iFJF Direct? Fast, Reliable Shipping: Orders processed within 1 business day from our US warehouses. Expert Support: Our team knows diesel, automotive, and powersports parts inside and out. Quality Guarantee: Every iFJF part is backed by our satisfaction promise. Trusted by Pros & DIYers: Thousands of technicians and home mechanics rely on iFJF parts daily. Installation Tips Always consult your vehicle or equipment service manual before beginning installation. Clean all mounting surfaces thoroughly before installing the new replacement part. Compare the new part side-by-side with the old one to verify correct fitment. Use the proper tools and torque specifications as recommended by the manufacturer. If you encounter any issues, contact iFJF support for assistance. Frequently Asked Questions Q: Will this part fit my vehicle?A: This replacement part is designed for Various (Various). Please verify your specific year, make, model, and engine configuration matches. Contact our support team with your VIN or serial number if unsure. Q: Is this OEM or aftermarket?A: This is a high-quality aftermarket replacement replacement part manufactured to meet or exceed OEM specifications at a fraction of dealer cost. Q: What's included in the package?A: The package includes the replacement part as shown in the product images. Please review all images for exact contents. Q: How long does shipping take?A: Most orders ship within 1 business day from our US warehouse. Standard delivery takes 3-7 business days. Expedited options available at checkout. Q: What is the return policy?A: 30-day return window for unused items in original packaging. Contact us immediately if you receive a defective or incorrect item. Related Resources How to Rebuild Your Carburetor: A Step-by-Step Guide Top 5 Signs Your Carburetor Needs a Rebuild

Read more less

Product Overview The iFJF Outboard Trim Tilt Pin Wrench Tool Set is a professional-grade marine mechanic solution for servicing hydraulic trim and tilt systems on Yamaha, Suzuki, Johnson, and Evinrude outboard motors. This comprehensive set includes MT0004, MT0006, and MT0009 wrenches — the three most commonly needed sizes — with heavy-duty pin construction rated at 180-200 ft-lbs. Also compatible with Seastar hydraulic steering end caps for complete marine hydraulic system service. Key Features Complete 3-Piece Set: Includes MT0004, MT0006, and MT0009 pin wrenches — covers the full range of marine trim/tilt and Seastar steering end cap sizes. Heavy-Duty Pin Strength: MT0004 & MT0006 pins rated at 180 ft-lb minimum — MT0009 pin rated at 200 ft-lb minimum for stubborn caps. Wide Marine Compatibility: Fits Yamaha, Suzuki, Johnson, Evinrude hydraulic trim/tilt end caps plus all Seastar hydraulic steering end caps. Precision-Machined Pins: Hardened steel pins engage end cap slots perfectly — no slipping, no rounding, no damage to expensive hydraulic components. Ergonomic Design: Long handle provides excellent leverage while the knurled grip ensures control, even with wet or oily hands. Compatibility Application Compatible Brands Trim & Tilt End Caps Yamaha, Suzuki, Johnson, Evinrude (Hydraulic Systems) Steering End Caps All Seastar Hydraulic Steering Systems Wrench Sizes Included MT0004, MT0006, MT0009 Specifications Tool Pin Strength (Min) MT0004 180 ft-lb MT0006 180 ft-lb MT0009 200 ft-lb Why This Set? Professional marine mechanics know that a standard adjustable pin wrench often can't handle the torque needed for seized trim/tilt caps. This set provides the exact sizes needed with hardened pins that won't bend under load — saving you from damaged caps, stripped slots, and expensive hydraulic system repairs. Frequently Asked Questions Q: Will this fit my Yamaha 150HP outboard?A: Yes. This set fits all Yamaha hydraulic trim/tilt end caps. Match the wrench size to your specific cap's pin spacing. Q: What's the difference between MT0004, MT0006, and MT0009?A: They have different pin spacings and pin diameters to fit different end cap sizes. Having all three ensures you have the right tool for any common marine hydraulic cap. Q: Will these work on Seastar steering?A: Yes. This set is compatible with all Seastar hydraulic steering end caps, making it a versatile addition to any marine toolbox. Q: Are the pins replaceable?A: The pins are permanently press-fit into the wrench body for maximum strength. With proper use, they'll last for years of professional service. Q: Can I use these on other hydraulic cylinders?A: These are specifically designed for marine trim/tilt and steering end caps. While they may fit other applications with matching pin spacing, they're optimized for marine use.

Read more less

Product Overview The iFJF P550824 / FS19947 Fuel Filter is a high-performance 7 Micron fuel filter designed specifically for International / IHC Trucks with DT466E, DT530E, MaxxForce Engines. Engineered to protect your fuel injection system from harmful contaminants, water, and debris, this filter meets or exceeds OEM specifications for filtration efficiency and flow rate. Key Features 7 Micron High-Efficiency Filtration: Removes 99% of harmful particles and water from diesel fuel, protecting high-pressure common rail injectors and fuel pumps Heavy-Duty Construction: Reinforced steel housing with corrosion-resistant coating withstands extreme operating temperatures and vibration Optimal Flow Rate: Up to 120 GPH ensures consistent fuel delivery even under maximum load conditions Water Separation Technology: Advanced hydrophobic media separates emulsified water from fuel, preventing injector tip erosion and microbial growth OEM Matched Fit: Precision-engineered threads and gasket profile ensure leak-free installation every time Compatibility Make / Application Engine Year Range International / IHC Trucks DT466E / DT530E / MaxxForce DT All Compatible Years Specifications Specification Value Part Number P550824 Filtration Rating 7 Micron Flow Rate Up to 120 GPH Filter Type Spin-On with Water Separation Material Heavy-gauge steel with anti-corrosion coating Replaces OEM Fleetguard FS19947, FS550824, WF10149, 1878042C91, 1878042C92, FF1185, 1873917C91, PFF5548, KX392D Why Choose iFJF Heavy-Duty Filters Modern diesel engines with common rail injection systems operate at pressures exceeding 30,000 PSI. Contaminated fuel can destroy injectors in minutes, leading to repairs costing thousands of dollars. Our P550824 fuel filter provides the first line of defense, meeting or exceeding the filtration performance of OEM filters at a fraction of the dealership price. Every filter is manufactured in ISO 9001 certified facilities and tested to ensure consistent quality. Frequently Asked Questions Q: How often should I replace the P550824 fuel filter?A: For heavy-duty diesel applications, replace every 15,000-25,000 miles or every 500 hours of operation, whichever comes first. For agricultural equipment, replace annually or per your equipment manufacturer's schedule. Q: What happens if I don't replace my fuel filter on time?A: A clogged fuel filter restricts fuel flow, causing power loss, poor acceleration, hard starting, and reduced fuel economy. In severe cases, bypassed contaminants can damage high-pressure fuel pumps and injectors — repairs that often exceed $5,000. Q: Is this filter compatible with biodiesel blends?A: Yes. Our filter media is compatible with biodiesel blends up to B20. However, biodiesel has stronger solvent properties and may release accumulated deposits in older fuel systems, requiring more frequent filter changes initially. Q: How do I prime the fuel system after filter replacement?A: Fill the new filter with clean diesel fuel before installation. After installing, cycle the key to the "ON" position (without starting) 3-4 times to activate the electric lift pump. For engines without a lift pump, use the manual primer pump (if equipped) or consult your service manual. Q: Does this filter require any special tools for installation?A: A standard oil filter wrench or strap wrench is sufficient for most applications. Always lubricate the gasket with clean diesel fuel before installation and hand-tighten, then turn an additional 3/4 turn. Related Products Complete your diesel fuel system maintenance: FS1003 Fuel Water Separator for Cummins FS1098 Fuel Water Separator w/ PCV PF7977 Fuel Filter for Ram 5.9L Cummins

Read more less

Product Overview The iFJF P556745 Fuel Filter is a high-performance 7 Micron fuel filter designed specifically for John Deere Agricultural Machinery & Tractors. Engineered to protect your fuel injection system from harmful contaminants, water, and debris, this filter meets or exceeds OEM specifications for filtration efficiency and flow rate. Key Features 7 Micron High-Efficiency Filtration: Removes 99% of harmful particles and water from diesel fuel, protecting high-pressure common rail injectors and fuel pumps Heavy-Duty Construction: Reinforced steel housing with corrosion-resistant coating withstands extreme operating temperatures and vibration Optimal Flow Rate: Up to 90 GPH ensures consistent fuel delivery even under maximum load conditions Water Separation Technology: Advanced hydrophobic media separates emulsified water from fuel, preventing injector tip erosion and microbial growth OEM Matched Fit: Precision-engineered threads and gasket profile ensure leak-free installation every time Compatibility Make / Application Engine Year Range John Deere Agricultural Machinery & Tractors John Deere Diesel Engines All Compatible Years Specifications Specification Value Part Number P556745 Filtration Rating 7 Micron Flow Rate Up to 90 GPH Filter Type Spin-On with Water Separation Material Heavy-gauge steel with anti-corrosion coating Replaces OEM John Deere AR86745, BF959, FF5045, 26667, TP1149, 716974 Why Choose iFJF Heavy-Duty Filters Modern diesel engines with common rail injection systems operate at pressures exceeding 30,000 PSI. Contaminated fuel can destroy injectors in minutes, leading to repairs costing thousands of dollars. Our P556745 fuel filter provides the first line of defense, meeting or exceeding the filtration performance of OEM filters at a fraction of the dealership price. Every filter is manufactured in ISO 9001 certified facilities and tested to ensure consistent quality. Frequently Asked Questions Q: How often should I replace the P556745 fuel filter?A: For heavy-duty diesel applications, replace every 15,000-25,000 miles or every 500 hours of operation, whichever comes first. For agricultural equipment, replace annually or per your equipment manufacturer's schedule. Q: What happens if I don't replace my fuel filter on time?A: A clogged fuel filter restricts fuel flow, causing power loss, poor acceleration, hard starting, and reduced fuel economy. In severe cases, bypassed contaminants can damage high-pressure fuel pumps and injectors — repairs that often exceed $5,000. Q: Is this filter compatible with biodiesel blends?A: Yes. Our filter media is compatible with biodiesel blends up to B20. However, biodiesel has stronger solvent properties and may release accumulated deposits in older fuel systems, requiring more frequent filter changes initially. Q: How do I prime the fuel system after filter replacement?A: Fill the new filter with clean diesel fuel before installation. After installing, cycle the key to the "ON" position (without starting) 3-4 times to activate the electric lift pump. For engines without a lift pump, use the manual primer pump (if equipped) or consult your service manual. Q: Does this filter require any special tools for installation?A: A standard oil filter wrench or strap wrench is sufficient for most applications. Always lubricate the gasket with clean diesel fuel before installation and hand-tighten, then turn an additional 3/4 turn. Related Products Complete your diesel fuel system maintenance: FS1003 Fuel Water Separator for Cummins FS1098 Fuel Water Separator w/ PCV PF7977 Fuel Filter for Ram 5.9L Cummins

Read more less

Product Overview The iFJF P559803 Fuel Filter is a high-performance 4 Micron fuel filter designed specifically for Agricultural Machinery — Tractors 6650/6750/6850/678HTA/TR97. Engineered to protect your fuel injection system from harmful contaminants, water, and debris, this filter meets or exceeds OEM specifications for filtration efficiency and flow rate. Key Features 4 Micron High-Efficiency Filtration: Removes 99% of harmful particles and water from diesel fuel, protecting high-pressure common rail injectors and fuel pumps Heavy-Duty Construction: Reinforced steel housing with corrosion-resistant coating withstands extreme operating temperatures and vibration Optimal Flow Rate: Up to 100 GPH ensures consistent fuel delivery even under maximum load conditions Water Separation Technology: Advanced hydrophobic media separates emulsified water from fuel, preventing injector tip erosion and microbial growth OEM Matched Fit: Precision-engineered threads and gasket profile ensure leak-free installation every time Compatibility Make / Application Engine Year Range Agricultural Machinery Heavy-Duty Diesel Engines All Compatible Years Specifications Specification Value Part Number P559803 Filtration Rating 4 Micron Flow Rate Up to 100 GPH Filter Type Spin-On with Water Separation Material Heavy-gauge steel with anti-corrosion coating Replaces OEM AR86755, 6N7617, 4024223 Why Choose iFJF Heavy-Duty Filters Modern diesel engines with common rail injection systems operate at pressures exceeding 30,000 PSI. Contaminated fuel can destroy injectors in minutes, leading to repairs costing thousands of dollars. Our P559803 fuel filter provides the first line of defense, meeting or exceeding the filtration performance of OEM filters at a fraction of the dealership price. Every filter is manufactured in ISO 9001 certified facilities and tested to ensure consistent quality. Frequently Asked Questions Q: How often should I replace the P559803 fuel filter?A: For heavy-duty diesel applications, replace every 15,000-25,000 miles or every 500 hours of operation, whichever comes first. For agricultural equipment, replace annually or per your equipment manufacturer's schedule. Q: What happens if I don't replace my fuel filter on time?A: A clogged fuel filter restricts fuel flow, causing power loss, poor acceleration, hard starting, and reduced fuel economy. In severe cases, bypassed contaminants can damage high-pressure fuel pumps and injectors — repairs that often exceed $5,000. Q: Is this filter compatible with biodiesel blends?A: Yes. Our filter media is compatible with biodiesel blends up to B20. However, biodiesel has stronger solvent properties and may release accumulated deposits in older fuel systems, requiring more frequent filter changes initially. Q: How do I prime the fuel system after filter replacement?A: Fill the new filter with clean diesel fuel before installation. After installing, cycle the key to the "ON" position (without starting) 3-4 times to activate the electric lift pump. For engines without a lift pump, use the manual primer pump (if equipped) or consult your service manual. Q: Does this filter require any special tools for installation?A: A standard oil filter wrench or strap wrench is sufficient for most applications. Always lubricate the gasket with clean diesel fuel before installation and hand-tighten, then turn an additional 3/4 turn. Related Products Complete your diesel fuel system maintenance: FS1003 Fuel Water Separator for Cummins FS1098 Fuel Water Separator w/ PCV PF7977 Fuel Filter for Ram 5.9L Cummins

Read more less

Product Overview The P58PP1955W05 Vacuum Plate for SFX Skimmer Filter Pump (1-Pack) is a high-quality pool parts built to exacting standards. Whether you're performing routine maintenance or a complete overhaul, this component provides the fit, finish, and reliability you expect from iFJF Direct. Key Features Precision-Engineered Fit: Manufactured to tight tolerances for a direct, hassle-free installation — no modifications required. Premium Materials: Constructed from high-grade materials that resist wear, corrosion, and fatigue for extended service life. OEM-Spec Performance: Designed to match or exceed original equipment specifications for consistent, dependable operation. Complete Package: Includes all necessary components for a professional-grade installation (verify contents in product images). Quality-Assured: Each unit undergoes rigorous inspection before shipping to ensure you receive a flawless product. Compatibility This pool parts is engineered for broad compatibility. Please check your equipment's part number against the listing to ensure proper fitment. Contact our support team if you need assistance with compatibility verification. Specifications Specification Detail Product Type Pool Parts Brand iFJF Condition New Fitment Direct Replacement Why Choose iFJF Direct? Fast, Reliable Shipping: Orders processed within 1 business day from our US warehouses. Expert Support: Our team knows diesel, automotive, and powersports parts inside and out. Quality Guarantee: Every iFJF part is backed by our satisfaction promise. Trusted by Pros & DIYers: Thousands of technicians and home mechanics rely on iFJF parts daily. Installation Tips Always consult your vehicle or equipment service manual before beginning installation. Clean all mounting surfaces thoroughly before installing the new pool parts. Compare the new part side-by-side with the old one to verify correct fitment. Use the proper tools and torque specifications as recommended by the manufacturer. If you encounter any issues, contact iFJF support for assistance. Frequently Asked Questions Q: Will this part fit my vehicle?A: This pool parts is designed for Various (Various). Please verify your specific year, make, model, and engine configuration matches. Contact our support team with your VIN or serial number if unsure. Q: Is this OEM or aftermarket?A: This is a high-quality aftermarket replacement pool parts manufactured to meet or exceed OEM specifications at a fraction of dealer cost. Q: What's included in the package?A: The package includes the pool parts as shown in the product images. Please review all images for exact contents. Q: How long does shipping take?A: Most orders ship within 1 business day from our US warehouse. Standard delivery takes 3-7 business days. Expedited options available at checkout. Q: What is the return policy?A: 30-day return window for unused items in original packaging. Contact us immediately if you receive a defective or incorrect item.

Read more less

Product Overview The P58PP1955W05 Vacuum Plate for SFX Skimmer Filter Pump (2-Pack) is a high-quality pool parts built to exacting standards. Whether you're performing routine maintenance or a complete overhaul, this component provides the fit, finish, and reliability you expect from iFJF Direct. Key Features Precision-Engineered Fit: Manufactured to tight tolerances for a direct, hassle-free installation — no modifications required. Premium Materials: Constructed from high-grade materials that resist wear, corrosion, and fatigue for extended service life. OEM-Spec Performance: Designed to match or exceed original equipment specifications for consistent, dependable operation. Complete Package: Includes all necessary components for a professional-grade installation (verify contents in product images). Quality-Assured: Each unit undergoes rigorous inspection before shipping to ensure you receive a flawless product. Compatibility This pool parts is engineered for broad compatibility. Please check your equipment's part number against the listing to ensure proper fitment. Contact our support team if you need assistance with compatibility verification. Specifications Specification Detail Product Type Pool Parts Brand iFJF Condition New Fitment Direct Replacement Why Choose iFJF Direct? Fast, Reliable Shipping: Orders processed within 1 business day from our US warehouses. Expert Support: Our team knows diesel, automotive, and powersports parts inside and out. Quality Guarantee: Every iFJF part is backed by our satisfaction promise. Trusted by Pros & DIYers: Thousands of technicians and home mechanics rely on iFJF parts daily. Installation Tips Always consult your vehicle or equipment service manual before beginning installation. Clean all mounting surfaces thoroughly before installing the new pool parts. Compare the new part side-by-side with the old one to verify correct fitment. Use the proper tools and torque specifications as recommended by the manufacturer. If you encounter any issues, contact iFJF support for assistance. Frequently Asked Questions Q: Will this part fit my vehicle?A: This pool parts is designed for Various (Various). Please verify your specific year, make, model, and engine configuration matches. Contact our support team with your VIN or serial number if unsure. Q: Is this OEM or aftermarket?A: This is a high-quality aftermarket replacement pool parts manufactured to meet or exceed OEM specifications at a fraction of dealer cost. Q: What's included in the package?A: The package includes the pool parts as shown in the product images. Please review all images for exact contents. Q: How long does shipping take?A: Most orders ship within 1 business day from our US warehouse. Standard delivery takes 3-7 business days. Expedited options available at checkout. Q: What is the return policy?A: 30-day return window for unused items in original packaging. Contact us immediately if you receive a defective or incorrect item.

Read more less