Products

Easy to Observe: The transparent shell design makes it easy to observe the filtration situation and know when to clean the filter. Stainless Steel Filter Screen: Made of stainless steel material to prevent rusting, with a filtration density of 100 mesh, it can filter out sediment particles and impurities in water. 3/4 Port Design: The interfaces at both ends are made of copper, and the filter interface size is 3/4 inch. The external thread outlet is 3/4 inch, and the internal thread inlet is 3/4 inch. Multi scenario use: Perfect for RVs, boats, campers, pets, gardening, household chores, swimming pools, pets, spa centers, etc., to meet your diverse needs. Packaging list: 100 mesh water pump filter kit * 1,100 mesh stainless steel filter screen * 2,Rubber washer * 2,Filter gasket * 3,Raw tape * 1.

Read more less

Fitment:for Club Car DS (8'' x 10-38'' ), Club Car G&E 1981-07 DS, gas 2000-up Precedent Replace Part Number:1010991, 1012284, 1014235, 1015813, 1033510-01. Function:Golf Carts utilize shock absorbers to soften ride quality over the bumps of rough terrain. The springs absorb the movement of the suspension, and stop them bouncing too much. The shock provides some resistance keep from bouncing more than a lot of times for the suspension springs. So slow down the vibration generated during vehicle operation and make the vehicle run smoothly. Material:Factory OEM replacement,well made,perfect fit like original,easy to install. Noted: Heavy duty golf cart shocks (or leaf springs) are recommended if you experience suspension sagging that is causing your wheels and tires to rub in your wheel wells. Fit type: Universal Fit Part number: SA01

Read more less

Fitment:Club Car DS 1981-2011 Electric Gas, 2004-Up Precedent. Replace Part Number:1012183, 1013164, 1014236, 102706401. Function:Golf Carts utilize shock absorbers to soften ride quality over the bumps of rough terrain. The springs absorb the movement of the suspension, and stop them bouncing too much. The shock provides some resistance keep from bouncing more than a lot of times for the suspension springs. So slow down the vibration generated during vehicle operation and make the vehicle run smoothly. Material:Factory OEM replacement,well made,perfect fit like original,easy to install. Noted: Heavy duty golf cart shocks (or leaf springs) are recommended if you experience suspension sagging that is causing your wheels and tires to rub in your wheel wells. Fit type: Universal Fit Part number: SA02

Read more less

Replaces Part Number: 102704901, 102265601. Fitment: Perfect fits 2004-up golf cart Club Car DS and Precedent Electric model with IQ system KDS motor and ADC motor. Function: After replace the speed sensor, it can increase the speed of your golf cart by 4-6 mph without losing torque, no need to replace the gear or update any motor or controller. Installation: Easy to install. Jack up the rear of the cart, remove the tire on the passenger side and the two bolts. Then replace the new speed sensor. Please turn off the traction / run switch before installation. Package Include: 1 X speed sensor, 1 X ADC motor magnet, 3 X bolts ( 1 large, 2 small ).

Read more less

Fitment: Replacement for 1200 brass cartridge, 1222 cartridge, 1225 plastic cartridge. Replaces Part Number: model 88431E replaces OEM#1225, model 80993TS replaces OEM#1200, model 88675A replaces OEM#1222. Function: The faucet cartridge puller is designed to install and remove brass and plastic cartridges, and only remove the refrigeration cartridge and sleeve on the faucet. Material: Made of high-quality steel, durable and reliable. Alternative to 86712 104421. Package included: 1 x Faucet Cartridge Puller Removal Tool.

Read more less

Replacement Part Number: 25010, 25080RP, 10747. Compatible Model: 28633EG, 28635EG, 28645EG, 28647EG, 28651EG, 28671EG, 28677EG, 28681EG. Works: Can works with Intex 1500, 2500, 4000 GPH (Gallon Per Hour) filtration pump, Intex saltwater chlorinator and Intex 2500 GPH (Gallon Per Hour) chlorinator. Use: Suitable for most above ground pools and equipment on the market, such as Intex, Summer Waves, etc. Notice: An 1.5 inch hose part is required to work perfectly. Package include 2 x plunger valve, 3 x o-rings.

Read more less

Fitment:Suitable for most Turbos Chargers T3, T4, T04B, T04E, GT30, GT32, GT35, T60, T61, T66, T60-1, T70, SUPER 70, and T3/T4 hybrids.(Not fit turbo with bolt to bolt 60.98mm) Specification: 10AN. Material:Made of aluminum alloy material with anodizing and anti-rust treatment, lightweight and high hardness, anti-rust and corrosion resistance. Advantages: Easy to install, just bolts on to the turbo. Package included:1*Flange adapter, 2 * Bolts, 1 * Oil Drain Gasket, 2*Washers. This product does not contain instructions.

Read more less

Material:Aluminum alloy rubber Fits ALL applications from 2011-2023 with a 6.7L Powerstroke engine Black Anodized components for better durability This Crankcase Ventilation System provides a SOLID solution to eliminate unwanted crankcase pressure and effectively eliminate any power-robbing crankcase pressure. This is also a nice way to clean up your engine bay for more room for modifications. This is the best way to be sure your engine is getting the cleanest oil residue-free air ensuring the strongest combustion and best engine efficiency. This will also stop the normal oily residue and sludge that collects in the intercooler and factory intercooler pipes. Service Free Crank Case Vent that includes a complete Venturi System to give an easy installation without having to buy additional parts or unnecessary trips to the auto parts store. Fitment:For 2011-2023 Ford 6.7L Powerstroke DieselPackage Content:1 x Turbo Piping KitThis Crankcase Ventilation System provides a SOLID solution to eliminate unwanted crankcase pressure and effectively eliminate any power-robbing crankcase pressure. This is also a nice way to clean up your engine bay for more room for modifications. This is the best way to be sure your engine is getting the cleanest oil residue-free air ensuring the strongest combustion and best engine efficiency.This will also stop the normal oily residue and sludge that collects in the intercooler and factory intercooler pipes. Service Free Crank Case Vent that includes a complete Venturi System to give an easy installation without having to buy additional parts or unnecessary trips to the auto parts store.

Read more less

1.Function:It was designed to conveniently relocate both front brake lines and wheel speed sensor wiring. Keeping your wheel sensors and brake lines from contacting with the tires,so that protecting your Wrangler's brake lines from getting pinched,broken,snapped,cut,or crushed.2.Fitment:Compatible for all JK and JL Wranglers3.package:2 PCS with cable ties.4.Easy to install:Just make sure to position your brake line and sensor wire to allow for cornering and suspension extension without rubbing on the tire.5.Material:Made of ABS and metal.High Quality and durable.

Read more less

1.Function:It was designed to conveniently relocate both front brake lines and wheel speed sensor wiring. Keeping your wheel sensors and brake lines from contacting with the tires,so that protecting your Wrangler's brake lines from getting pinched,broken,snapped,cut,or crushed.2.Fitment:Compatible for all JK and JL Wranglers3.package:2 PCS with cable ties.4.Easy to install:Just make sure to position your brake line and sensor wire to allow for cornering and suspension extension without rubbing on the tire.5.Material:Made of ABS and metal.High Quality and durable.

Read more less

Fitment:1999-2019 Ford F-250 Super Duty 4WD1999-2019 Ford F-250 Super Duty 2WD1999-2019 Ford F-350 Super Duty 4WD1999-2019 Ford F-350 Super Duty 2WD2011-2017 Chevy GMC Trucks1999-2012 Dodge Trucks Fitment: 1999-2019 Ford F250 F350 Super Duty 4WD 2WD, 2011-2017 Chevy GMC Trucks, 1999-2012 Dodge Trucks. Function: Delivers diesel fuel from your truck chassis transfer tank directly into your tank, including all hoses and hardware. Designed for use with 3/8" female drain fittings, some cutting may be required for the filler hose/neck. Feature: Fuel hose for connecting fuel tank to truck, kit includes hose, clips and fittings for easy installation.

Read more less

[Material]: aluminum alloy, brass, rubber. [Design]:The product is applicable to 3/8-inch internal thread drain pipe connector, which is compatible with Chevy trucks (1999-2010). [Function]: The product provides stable fuel gravity supply, which can control the fuel level of the fuel tank. [Prompt]: Remember to close the valve to avoid gas overflow from the oil tank. [Package includes]:1 * brass rollover valve, 1 * brass stop valve, 1 fuel hose, 4 * small hose clamp, 4 * large hose clamp, 1 * adhesive tape.(No installation instructions)

Read more less

1.Fitment:Fits 2004.5 - 2010 Che vy Silverado 2500/3500 Duramax and 2004.5 - 2010 GMC Sierra 2500/3500 Duramax Diesel.2.Material：CNC Machined construction for unsurpassed fit and finish.It is made of Stainless steel structure.Anti-corrosion, anti-rust,long service time.3.Installation process:Fittings can be used simultaneously in left and right fuel rail.Installation is very simple, just a few minutes.4.Benefits:Reduce the fuel pressure drop caused by restrictions on the raw material fuel rail fittings.5.Features:Fuel Rail Fitting replaces the restrictive stock fitting and helps maintain fuel rail pressure during heavy engine load applications.This high quality stainless steel fitting increases available fuel flow volume from the CP3 pump to the fuel rail. Adequate fuel flow is vital to producing maximum efficient clean horsepower. These fittings benefit both fuel rails, since the driver side fuel rail feeds the passenger side.

Read more less

1.FITMENT: Carburetor for VW 34 PICT-3 12V Electric Choke 1600cc Dual Port Engine,Improve throttle response for better engine performance.2.COMPATIBLE WITH: 1971-1979 Volkswagen Beetle/Super Beetle,1973-1974 Volkswagen Thing,1971-1974 Volkswagen Karmann Ghia,1967-1973 Volkswagen Squareback,1969-1972 Volkswagen Transporter.3.REPLACES PART NUMBER: 113129031K,98-1289-B,34 PICT-3.4.PACKAGE INCLUDES: 1x 34 PICT-3 carburetor for VW,1x mounting gasket,2x mounting bolts,2x mounting nuts,2x screw.5.WARM HINT: There is no instructions in our package,and you need to do some adjustment before installing.But don’t worry,there’re many vedios online about these problems.

Read more less

1.Replacement: PN 11537541992 and 11537544638.2.Fitment:3.0L twin-turbo N54(3.0-litre twin turbo)motors 335i,335xi,135i,N53(3.0-litre non-turbo)2006-2010 325i,330i,525i,525xi,528i,528xi,530i,530xi.3.Fitment:N20(2.0-litre turbo)Z4 2013&up,N52 X3.4.Material:Made from high strength aerospace aluminum.Grade 6061 T6511.Durable and wear-resistant.Designed to maximize the resistance to breakage.5.Package includes:Aluminum fitting.Stainless hose clamp.High quality o-ring.

Read more less

Applicable Model: Dual Split Hose Plunger Valve: 26323CA, 26331CA, 26361CA, 26371CA,26175EH, 26193EH, 26303EH, 26321EH, 26323EH, 26331EH, 26335EH, 26337EH, 26351EH, 26371EH, 26375EH, 26381EH, 28345VM, 26301T, 26341W, 26345W, 26351W, 26751W; Pool Plunger Valve Assembly: 28633EG, 28635EG, 28645EG, 28647EG, 28651EG, 28671EG, 28677EG, 28681EG. Replace Part Number: Dual Split Hose Plunger Valve: 11872; Pool Plunger Valve Assembly: 10747, 25010, 25080RP; Pool Inlet Air Nozzle: 12364; Pool Inlet Strainer Connector: 12365; Strainer Connectors: 11070; Strainer Grids: 11072. Material: Made of high-quality materials, strong and durable. It is applicable to the replacement of parts of most Above Ground Swimming Pools in the market Package included: 1 *Split Hose Plunger Valve , 1 *Split Hose Plunger Valve, 1 * 1.25’‘ Pool Inlet Air Nozzle, 1 * 1.25‘’ Pool Inlet Strainer Connector, 2*Strainer Connectors, 2*Strainer Grids. This product does not contain instructions. If there is a problem of missing parts, you can contact us. Note: If your hose are 1.5 inch, you need a adapter B. Also compatible with pool pump below 1000 GPH. Not suitable for inflatable pools.

Read more less

Compatible Model: 26323CA, 26331CA, 26361CA, 26371CA, 26175EH, 26193EH, 26303EH, 26321EH, 26323EH, 26331EH, 26335EH, 26337EH, 26351EH, 26371EH, 26375EH, 26381EH, 26301T, 28345VM, 26341W, 26345W, 26351W, 26751W. Replacement Part Number: 11872. Replace your worn or faulty swimming pool parts. Function: Open and close the water flow from the pool to the filtration system. The valve can separate the hose to turn off the pump suction, and it can used for vacuum pumping. Use: Suitable for most above ground pools and equipment on the market, such as Intex, Summer Waves, etc. Notice: Just two plunger valve. It can shuts off both hoses at the same.

Read more less

Fitment:Fits for all Reverse and Non Reverse Gear Equipped Snowmobiles. Interchange Part Number: 1201-DF. Material:Made of high-quality materials, 7 / 16 inch galvanized steel wire rope is durable and can increase the downward pressure. The knurled mounting surface eliminates rotation and looseness on the slide rail. Function:The product produces snow dust when riding, which is used to cool and lubricate the tracks and slideways. With a low-cost method, the snow motorcycle can run well in a low snow environment, protect the heat dissipation of the engine and prolong the service life of its snow motorcycle components. Package included:Carbide Ice Scratchers(Pair of 2 pcs).

Read more less

1222HD Commercial Heavy-Duty Brass Shell PosiTemp One-Handle Tub Shower or Shower-Only Faucet Cartridge Replacement Product Features Faucet cartridge replacement for One-Handle one-handle PosiTemp tub shower or shower-only faucets Designed to withstand heavy use in commercial and industrial facilities PosiTemp valves consistently maintain water pressure and control temperature Heavy-duty brass construction Engineered for hassle-free installation and removal Product Specifications Warranty: 60 Day Color: Brass/Antique Brass Size: SINGLE

Read more less

[Replaces Part number]: 12363 12373. [Compatible]:26165EH, 26167EH, 26175EH, 26183MW, 26191CA, 26191EH, 26193EH, 26301T, 26303EH, 26309EH, 26321EH, 26323CA, 26323EH, 26331CA, 26331EH, 26335EH, 26337EH, 26341W, 26343EH, 26345W, 26351EH, 26351W, 26361CA, 26361EH, 26361W, 26365EH, 26371CA, 26371EH, 26375EH, 26381EH, 26719MW, 26719W, 26733EH, 26735EH. [Function]: The air nozzle at the entrance of the ground swimming pool can let the circulating water pass through the swimming pool. [Materials]: The products are made of high-quality plastic materials. [Package included]:1*Air Jet Valve ,1*Air Jet Valve Cap.(No installation instructions)

Read more less

1.Throttle Body Mounting; Intake Manifold Boot fits POLARIS Ranger Sportsman 700 4X4 2004-2009.2.OEM: 1253527.Part number:R09WH68,R07RF68,R08WH68,A07MH68,A08TN68,R08RF68,R08RH68,R06RF68,A04CH68,R06RD68,A05MH68,A06MH68.3.Material:made of high quality ABS plastic.Durable.4.Package includes:an intake boot with mounting clamp.5.Intake diameter (carburetor side) is 51 mm,as the photo.

Read more less

1.Fitment:Water in Fuel Indicator Sensor for Duramax 6.6L Chevrolet Silverado and GMC Sierra Engine 2001-2011 Truck.2.Replaces OEM part number:12639277,12639450, 97384931.3.Function:Let the Engine Control Unit(ECU) and/or dashboard lamp indicator know when water detection has occurred in the vehicle's fuel supply.4.Package includes:1 Water in Fuel Indicator Sensor with o-ring.5.Attention:Our sensor is 8 sided desigh,which is not same as OEM’s 12 sided.So please choose right tools to install this sensor.

Read more less

1.Fitment:Carburetor overhaul repair kit for Walbro LMK carburetor with fuel pumps.2.Models:For Kohler CH11,CH12.5,CH13,CH14,CH15,CV11,CV12.5,CV13,CV14,CV15,CV16,CV460,CV490,CV491,CV492, CV493,SV591,SV600.3.Replaces part number:for Kohler 1275703-S.4.Package Includes:Set of 1 overhaul repair kit,1 x spark plug,1 x fuel filter and hoses and clamps.5.Notice:Walbro Carburetors with Gravity Feed don’t use this model.

Read more less

OEpartnumber:31600-HM7-003,31600-HM7-830,31600-HN0-671,31600-HN5-M40,31600-KPF-961,31600-KTB-003. Dimension:86mm(3 7/16") x 83mm(3 1/4") x 25mm(1"). This motorcycle voltage rectifier has suitable heat sink fin design for better heat elimination, ensuring long time service in common temperature. Help to dissipate excess voltage, improve charging capability, prevent overcharging battery, saving and stabilizing current. Please kindly confirm the fitment before ordering to make sure this item is perfectly fit. Easy to install,Perfect match to your original vehicle, just plug-and-play, directly replace the existing broken voltage rectifier.

Read more less