Description
Carbon Fiber Center Console Shift Cup Holder Trim Cover for 2015-2020 Ford F-150
Give your Ford F-150's interior a premium upgrade with this carbon fiber pattern center console trim cover. Designed specifically for 2015-2020 F-150 models (including Raptor, XL, XLT, Lariat, King Ranch, Platinum, and Limited), this trim piece covers the shift cup holder area and gear shift panel with a sleek 3D carbon fiber finish. The peel-and-stick installation takes under 5 minutes — no tools, no drilling, no permanent modifications.
Key Features
-
Precision Fit for F-150: Laser-measured to match the exact contours of 2015-2020 Ford F-150 center consoles — factory-fit appearance without gaps or overhang.
-
3D Carbon Fiber Pattern: Deep, dimensional carbon fiber weave with a UV-resistant clear coat — looks premium and protects against sun fading.
-
Scratch Protection: Covers existing scratches, scuffs, and wear marks on your factory console while preventing future damage.
-
3M Automotive Adhesive: Pre-applied 3M double-sided tape provides a secure, long-lasting bond that won't peel in summer heat.
-
Clean Removal: If you ever want to remove it, the 3M adhesive leaves no residue when heated and peeled carefully.
-
Full Trim Kit: Includes center console cup holder decoration piece and gear shift panel trim cover — complete console transformation.
Compatibility
| Make |
Model |
Years |
Trims |
| Ford |
F-150 |
2015-2020 |
XL, XLT, Lariat, King Ranch, Platinum, Limited, Raptor |
Specifications
| Spec |
Value |
| Material |
High-Grade ABS Plastic with 3D Carbon Fiber Pattern |
| Finish |
UV-Resistant Clear Coat |
| Adhesive |
3M Automotive-Grade Double-Sided Tape (Pre-Applied) |
| Kit Contents |
1x Cup Holder Trim + 1x Gear Shift Panel Trim Cover |
| Installation |
Peel-and-Stick — Under 5 Minutes |
Installation Guide
- Clean the installation surface thoroughly with isopropyl alcohol (included alcohol wipe). Remove all dirt, oil, and armor-all residue.
- Test-fit the trim piece on your console WITHOUT removing the adhesive backing. Confirm alignment and fitment.
- Peel the red backing from the 3M adhesive tape. Do NOT touch the exposed adhesive.
- Align carefully and press the trim piece into position. Apply firm, even pressure for 30-60 seconds across the entire surface.
- Avoid washing or exposing to moisture for 24 hours to allow the adhesive to fully cure.
- Pro Tip: For best adhesion in cold weather, warm the console surface and trim piece with a hair dryer before application.
Why Upgrade Your F-150 Console?
- The factory piano black and silver plastic trim on 2015-2020 F-150s is prone to scratching, fingerprint smudging, and sun fading after a few years of use.
- This carbon fiber trim cover not only hides existing wear but prevents future damage — maintaining resale value.
- The carbon fiber look transforms the center console area from basic plastic to a high-end, sport-luxury aesthetic that matches aftermarket steering wheels, shift knobs, and dash kits.
Frequently Asked Questions
Q: Is this real carbon fiber?
A: This is high-quality ABS plastic with a 3D carbon fiber patterned surface and UV-resistant clear coat. It provides the premium carbon fiber look at a fraction of the cost of real carbon fiber, with better impact resistance.
Q: Will it fit my 2018 F-150 Lariat?
A: Yes. This trim piece fits all 2015-2020 Ford F-150 models regardless of trim level, including XL, XLT, Lariat, King Ranch, Platinum, Limited, and Raptor.
Q: Is installation difficult?
A: Not at all. It's a simple peel-and-stick application with pre-applied 3M automotive adhesive. Clean the surface with the included alcohol wipe, test fit, peel the backing, and press in place — under 5 minutes total.
Q: Will it leave residue if I remove it?
A: No. 3M automotive adhesive is designed for clean removal. Heat with a hair dryer for 30 seconds, peel off slowly, and any minor residue cleans up easily with isopropyl alcohol.
Q: Does it interfere with cup holder or shifter function?
A: No. The trim piece is precision-cut to fit around the cup holder opening and shift boot without obstructing normal operation of either component.
Q: Will it hold up in hot summer temperatures?
A: Yes. The 3M automotive adhesive is rated for temperatures from -40°F to 200°F. The ABS material and UV clear coat resist warping and fading even in dashboard-level heat.
Related Products
