Description
iFJF Door Bushing Removal Tool & Hinge Liners for Jeep Wrangler JK/JL/Gladiator JT 2007-2021
The iFJF Door Bushing Removal Tool is the do-it-yourself solution every Jeep Wrangler owner needs. Over time, the factory door hinge bushings on the JK, JL, and Gladiator JT corrode, wear down, and cause the doors to squeak, rattle, and become difficult to close. This professional-grade stainless steel removal tool lets you extract those worn OE bushings and install fresh hinge liner pins — all in your driveway with basic tools. No trip to the dealer, no expensive shop labor, no need to live with doors that don't close right.
Key Features
-
Professional-Grade Stainless Steel Tool: Precision-machined from high-grade stainless steel for durability and repeated use. Designed to withstand the hammer impact needed to drive out corroded, seized OE bushings without deforming or mushrooming.
-
Fixes Squeaky & Hard-to-Close Doors: Worn hinge bushings are the #1 cause of door squeaks, rattles, and stiff operation on Jeep Wranglers. This tool makes bushing replacement a straightforward at-home job — no mechanic needed.
-
Complete Bushing Replacement Kit: Includes the removal tool plus replacement hinge liner pins. Remove the old, tap in the new — your doors operate like factory-fresh.
-
Universal JK/JL/JT Compatibility: Works on all 2007-2021 Jeep Wrangler JK (2-door & 4-door), JL (2-door & 4-door), and 2020-2021 Gladiator JT models. One tool covers the entire modern Wrangler family.
-
Simple Hammer Installation: No press, no special tools, no mechanical experience required. Align the tool over the hinge, tap with a standard hammer, and the old bushing drives out in seconds.
-
2-Year iFJF Warranty: Built to last and backed by our quality guarantee.
Vehicle Fitment
-
Jeep Wrangler JK / JKU (2007-2018): 2-door & 4-door models, all trim levels
-
Jeep Wrangler JL / JLU (2018-2021): 2-door & 4-door models, all trim levels
-
Jeep Gladiator JT (2020-2021): All trim levels
-
NOT compatible with: Jeep Wrangler TJ (1997-2006), YJ (1987-1995), CJ models
Installation Guide
-
Support the Door: Open the door and place support under it, or have a helper hold it. Remove the existing hinge pins.
-
Position the Removal Tool: Place the iFJF removal tool at the top of the hinge, aligned with the OE bushing.
-
Tap Firmly: Strike the tool with a standard hammer until the OE bushing is fully driven out of the hinge bore.
-
Clean the Hinge Bore: Remove any rust, debris, or corrosion from the hinge bore. Apply a light coat of grease or lubricant.
-
Install New Bushings: Tap the new hinge liner pins into place using a rubber mallet or hammer with a block of wood to prevent damage.
-
Reinstall the Door: Align and reinstall the door. Test for smooth, quiet, rattle-free operation.
Pro Tip: Place a piece of cardboard or a shop towel under the hinge before hammering to protect your vehicle's paint.
Why Your Jeep Doors Rattle — And How This Tool Fixes It
Jeep Wranglers are designed with removable doors, which means the hinge system uses plastic liner bushings between the steel hinge pin and the steel hinge bore. These bushings are consumable — they wear down from thousands of door open/close cycles and the constant vibration of off-road driving. Worse, moisture and road salt can corrode the OE bushings, causing them to swell and seize. The result: doors that creak and groan with every movement, rattle over bumps, and require a shoulder-shove to close properly. This iFJF tool removes those damaged bushings in minutes, allowing you to install fresh hinge liners that restore the factory door feel. It's one of the highest-impact, lowest-cost maintenance items you can do on a JK or JL.
Package Includes
- 1 × Stainless Steel Door Bushing Removal Tool
- Replacement Hinge Liner Pins
- Installation Guide
Frequently Asked Questions
My doors rattle on rough roads. Will this fix it?
Yes. Worn or corroded door hinge bushings are the primary cause of door rattling on JK and JL Wranglers. Replacing these bushings with this tool and fresh liner pins typically eliminates the rattle completely.
Do I need a mechanic for installation?
No. This is a straightforward at-home job. Most owners complete it in under an hour with basic hand tools and a hammer. No special skills required — just follow the step-by-step guide above.
Will this work on a Gladiator JT?
Yes. This kit is fully compatible with the 2020-2021 Jeep Gladiator JT, which shares the same door hinge design as the JL Wrangler.
Will this fit a 2022 or newer model?
The kit is specified for 2007-2021. While the hinge design has not changed significantly, we recommend verifying compatibility with your specific model year. Contact our support team if you have a 2022+ model.
Can I reuse the tool on multiple Jeeps?
Absolutely. The stainless steel construction is designed for repeated use. Many owners use this tool to service doors across multiple Jeeps in their household or club.
📖 Related Installation Guides & Articles
