Products

Features Stainless Steel Construction — Braided stainless steel exterior resists off-road debris, rocks, and mud that can damage factory rubber brake lines. 21.5" Front Line Length — Part #RS6249, front pair extended to 21.5" to accommodate 4-6" suspension lifts without tension or slack. DOT Approved — Meets Department of Transportation standards for safe, reliable braking performance on and off the road. No Hose Expansion — Inner Teflon layer is protected from expansion (even at 4,000 PSI) by the braided stainless exterior, giving a firmer pedal feel. Compatibility Fits 1997-2006 Jeep Wrangler TJ (4WD) Fits 2004-2006 Jeep Wrangler TJ Unlimited (4WD) Fits 1987-1995 Jeep Wrangler YJ (4WD) Fits 1984-2001 Jeep Cherokee XJ (4WD & 2WD) Technical Note: Only fits models with 4-6" of suspension lift FAQQ: What length are these brake lines?A: These are the front pair, 21.5" in length (Part #RS6249), designed for 4-6" lifted Jeeps.Q: Will these fit my stock (non-lifted) Jeep?A: No, these are specifically for vehicles with 4-6" of suspension lift. Using them on a stock height Jeep will result in excess slack.Q: Are these compatible with stock brake fittings?A: Yes, the high-quality hollow fasteners at both ends match stock brake line connections for a leak-free installation.

Read more less

Features Premium Construction: Made from durable anodized aluminum for heavy-duty performance and long-lasting stability Performance Upgrade: Improves torque output and increases fuel economy for better overall engine efficiency Precision Fit: Designed specifically for 4-bolt throttle bodies on 4.0L and 2.5L engines Easy Installation: Direct bolt-on design requires no modifications for a straightforward upgrade Compatibility Jeep Wrangler YJ: 1987-1995 with 4.0L or 2.5L engine (4-bolt throttle body only) Jeep Wrangler TJ: 1997-2006 with 4.0L or 2.5L engine (4-bolt throttle body only) Jeep Cherokee XJ: 1984-2001 with 4.0L or 2.5L engine (4-bolt throttle body only) Jeep Comanche MJ: 1986-1992 with 4.0L or 2.5L engine (4-bolt throttle body only) Important: Only fits vehicles with 4-bolt throttle bodies. Does not fit newer drive-by-wire throttle bodies. FAQ Q: How much performance improvement can I expect? A: While results vary, users typically see 2-4 HP gains and improved throttle response, along with better fuel economy. Q: Will this fit my 2007 JK Wrangler? A: No, this spacer only fits YJ (87-95) and TJ (97-06) models with 4-bolt throttle bodies. JK models use a different throttle body design. Q: Do I need a tuner after installing this spacer? A: A tuner is not required but can help optimize the air-fuel mixture for maximum performance gains.

Read more less

Material: Aluminum alloy All the plates in the kit are CNC laser cut or CNC processed, which are and durable. Comes with gaskets, and the plugs are sealed high‑pressure fittings, reliable to use. The installation is simple and does not require complicated operations. Fitment:For 1996-2009 Chevy / GMCFor 1994-2003 SaturnFor 1999-2001 OldsmobileFor 1996-2004 IsuzuFor 1996-1999 Acura SLXFor 1996 HummerFor 1999-2000 Cadilac EscaladePackage Content:1 * EGR Delete Block Off Plates Kit

Read more less

Material:Aluminum Alloy Comes with a premium O-ring for seamless contact. Billet aluminum IAC (idle air control) and EGR (exhaust gas recirculation) block-off plates add a distinctive touch to your throttle body. Specially designed for off-road use only when one or both controls have been eliminated for racing purposes. Made of 6061 T6 Aluminum, it features high hardness and is resistant to corrosion. Cut with CNC technology guarantees the accuracy of each cutting part for easy assembly and adaptation. Perfect Fitment . Super easy to install. Fitment:For 4.8L 5.3L 6.0L LSX Silverado EGR Delete Plug Intake Exhaust Block Off PlatePackage list:2 X EGR Delete Plate3 X Stainless Steel Bolt1 X O-ring1 X Graphite Gasket

Read more less

1.[Fitment]: Carburetor for weber 40mm carb 2 barrel Beetle Car.2.[Product parameters]: 40 IDF 2 Barrel Carb Carburetor Carburetor 40mm (Instructions not included but easy to install).3.[Package includes]:1 * Carburetor(Golden), 2 * Mounting Gaskets,1*Metal Material Fuel Filter,1*Fuel Line,4*Clamps and other accessory.(This product is a fuel filter made of metal.).4.[Function]: This carburetor product aims to improve the performance of vehicles by improving the delivery of fuel and air mixtures.5.[Material]: The carburetor is made of high-quality materials and has a durable structure, ensuring long-term use and reliable performance.

Read more less

Throttle body spacer for Ford Mustang GT 1999-2004 4.6L V8.Replaces Part Number:400-524Fitment:1999-2004 Ford Mustang GT 4.6L V81996-2004 Ford Crown VictoriaCNC machined from a solid billet block of 6061-T6 aerospace grade aluminum. Increases low and mid-range power as well as fuel economy.Grooved design maintains intake velocity and gives superior air/fuel mixture for greater efficiency. Fitment: Throttle Body Spacer for Ford Mustang GT 1999-2004 4.6L V8. Replaces Part Number: 400-524. Material: CNC 6061-T6 Billet Aluminum. Anodized red for a good looking and a longer service life. Feature: Provides stronger mid-range power, improves low end torque and throttle response, with tremendous torque gains seen between 800 to 3000 RPM.

Read more less

Fitment:Large Bearing 4280FR4048L, Small Bearing 4280FR4048E, Washing Tub Seal 4036ER2004A, Tub Seal Gasket 4036ER4001B for Kenmore Sears LG . Package included:1*Washer Tub Seal, 1*Washing Tub Gasket, 1*Washer Tub Bearing(Big) and 1*Washer Tub Bearin(Small). Function:Help to repair Noisy, Leaking, Shakes and Moves. Advantage:External fluororubber and internal steel plate barrel sealing; Silicone rubber barrel gasket; Double seal large bearing and small bearing; Suitable for noise and vibration detection. Warm tips: Please cut off the power supply during installation to prevent danger.

Read more less

Fitment: Compatible with most Polaris Ranger UTV & ATV Models 40mm/44mm bearing grease tools. Such as Sportsman  500/850/ XP 1000, RZR 570/800/XP 900/XP 4 900/XP 1000/XP 4 1000,Ranger 570/800/900,RZR RS1 etc. Function: This Wheel Bearing Grease Tool is designed to improve the ability of your wheel bearing grease. Stable Material: 6061 Aluminum, CNC precision machining. This also enables the grease in the bearing to spread quickly and evenly, allowing only 1 gap, thus allowing the grease to flow easily inside to maintain lubrication. Easy Installation:（Without removing the axle or the entire hub assembly）1. Remove wheel and hub 2. Insert the product into the bearing (44mm for the front, 40mm for the rear) 3. Point grease gun at grease device and inject grease. Package Include: 1x44MM Wheel Bearing Greaser tool + 1x40MM Wheel Bearing Greaser tool (as shown) .

Read more less

Size:10977 The item Fitment these models:Rear- ACE900- BRUTUS-BRUTUS 900- BRUTUS HD/PTO, 900- DIESEL 455-FOREST 800- HAWKEYE 325- LSV ELECTRIC- RANGER 325, 400, 500, 6x6, 570, 700, 800, 900, 1000, EV - RANGER SERIES 10, 11- RANGER XP 800, 900- RZR 570, 800- SPORTSMAN 325, 335, 400, 450, 500, 570, 600, 700, 800, 6X6, 850, 1000, MV7, XP 850- WORKER 335-SPORTSMAN XP 1000- WORKER 500- XPLORER 500Mid Axle(6x6 models): - RANGER 500 6X6- RANGER 700 6X6 - RANGER 800 6X6

Read more less

Fitment: Chevy C1500/C2500, C1500/C2500/K1500/K2500 Suburban, S10, S10 Blazer, Chevy Silverado 1500, Chevy Silverado 1500 Classic, Chevy Silverado 1500 LD, Chevy Tahoe, GMC C1500/C2500, GMC K2500 Suburban, GMC Sierra 1500 Classic/ Limited, GMC Yukon, F150.( See description for details) Replace Part Number: 410520. Material: It is made of high-quality iron and has a good antirust coating on the surface, which improves the durability and antirust. Advantages: direct replacement, high cost performance and convenient installation. Package included: 2 x Rear Lowering Shackles. Part number: RLS-0520 Fit type: Universal

Read more less

Fitment: Replacement for any Aqua Magic Style II permanent toilet. Function: The components of the RV toilet can solve the problem of water leakage at the back of the toilet and keep the water in the toilet Material: It is mainly made of rubber and plastic materials, which is airtight, not easy to damage and corrosion resistant Package include:1x water valve cartridge, 1x drive arm seal, 1x water inlet seal, 1x water inlet spring, 1x spring retainer and 1x closet flange seal Note: Please confirm whether your model is suitable before purchase

Read more less

[Replaces Part Numbers]: 2198585, 2198586, 2220398, 2220402, 2255114, 4388635, 4389102R. W10193666, W10193840, W10290817, W10757851.AP3137510, AP5956767,ADC9102, TJ4389102R, TJ4389102L、PS10064583, PS557945. [Applicable] 4389102 ice maker transmitter is used in combination with Amana,refrigerator ice maker models. [Function]: The product ice level control panel uses infrared light to detect the ice level in the ice bucket. Infrared beam recovery! Overnight, the ice filled the top and stopped.(Before installing the product, please disconnect the power supply and wear work gloves to protect your hands.) [Installation]: The installation is very simple. After turning off the power, just unplug the old parts, replace the circuit board by removing and reinstalling the screws, and then reinstall the parts. [Package includes]: 1 * transmitter board, 1 * receiver board. (With installation instructions)

Read more less

Fits Polaris RZR 900/1000 and Ranger models with a 44mm wheel bearing Fitment ATV, UTV or SxS models,that has a 44MM wheel bearing.Before you purchase, you need to confirm the model Non-slip grip design,Knurled surface provides a non-slip grip and machined from high-grade 6061 T6 Aircraft Aluminum Precision step bored in order to provide clearance for the CV Shaft and reduce back pressure Designed Tapered housing with an O-Ring seal allows for all of the grease to be applied instead of wasted  The item Fitment these models: Front and Rear Axle - RZR XP 1000 - RZR RS1 - RZR XP 900 - RZR XP 4 900 - RZR XP 4 1000 - RZR 4 900 - RZR 900 - SCRAMBLER 850 - SCRAMBLER XP 850 - SCRAMBLER XP 1000 - SPORTSMAN 500 - SPORTSMAN 550 - SPORTSMAN 850 - SPORTSMAN SP 850 - SPORTSMAN XP 550 - SPORTSMAN XP 1000 - SPORTSMAN X2 550 - SPORTSMAN X2 850 Front Only:   - RZR 4 800 - RZR 570 - RZR 800 - RZR S 800 - RANGER 570 - RANGER 800 - RANGER 900 - RANGER CREW 570 - RANGER CREW 800 - RANGER CREW 900 Rear Only:  - Forest 850 EU - Forest 1000 EU : 2015 -General : 2016

Read more less

[Size Parameters]: One 40mm and one 1 1/2 inches (38mm). Product length is 1.8 inches. [Fitment]: Fits 1 1/2" standard inlet and outlet, you can use this filter hose conversion kit to connect above ground pool hose with 1 1/2" NPT thread female PVC adapter/connector. [Function]: This product can connect the above-ground filter hose to the pool filter pump. [Material]: The product is made of durable plastic, which is a standard configuration for pool accessories and connectors. Reduce the potential for leakage. [Package includes]: 2*filter hose conversion adapter, 2*O-rings, 2*Washers,1*PTFE tape.

Read more less

[Size Parameters]: One 40mm and one 1 1/2 inches (38mm). Product length is 1.8 inches. [Fitment]: Fits 1 1/2" standard inlet and outlet, you can use this filter hose conversion kit to connect above ground pool hose with 1 1/2" NPT thread female PVC adapter/connector. [Function]: This product can connect the above-ground filter hose to the pool filter pump. [Material]: The product is made of durable plastic, which is a standard configuration for pool accessories and connectors. Reduce the potential for leakage. [Package includes]: 4*filter hose conversion adapter, 4*O-rings, 4*Washers,2*PTFE tape.

Read more less

[Material]: This product is made of CPVC and PVC plastic. [Features]: The product can withstand the pressure up to 150 PSI, so it is suitable for the spa and water facilities that need high flow. And it is resistant to chemical corrosion, and the plastic material is not easy to rust. [Function]: It is used for turning, closing or mixing water flow, and can instantly regulate the valve position; It is connected to the entrance of any port. [Design]: Highly sealed diverter valve is applicable to most swimming pool pumps, serving automation. [Package includes]: 1 * 3 Port PVC diverter valve.(If you need installation instructions after purchasing this product, please feel free to contact us)

Read more less

[Material]: This product is made of CPVC and PVC plastic. [Features]: The product can withstand the pressure up to 150 PSI, so it is suitable for the spa and water facilities that need high flow. And it is resistant to chemical corrosion, and the plastic material is not easy to rust. [Function]: It is used for turning, closing or mixing water flow, and can instantly regulate the valve position; It is connected to the entrance of any port. [Design]: Highly sealed diverter valve is applicable to most swimming pool pumps, serving automation. [Package includes]: 1 * 2 Port PVC diverter valve.(If you need installation instructions after purchasing this product, please feel free to contact us)

Read more less

Troubleshooting Solution: If your heater occasionally fails to enter swimming pool mode or if buttons are unresponsive, this replacement pad can effectively solve these issues.Perfect Fit: 472610Z switch membrane pad compatibility with pool and spa heater electrical systems, ensuring a seamless replacement experience.Friendly Design: The intuitive layout of buttons on the membrane pad ensures ease of use, while clearly marked functions make operation a breeze.Easy Installation: The pad's attachment mechanism simplifies installation, so you can have your heating system up and running quickly.Please Note: Turn off the power supply before installation.

Read more less

Compatible with fuel types:Fits common fuels such as unleaded gas,diesel,fuel oil,up to 20% biodiesel and related additives. Fuel filter element:30 micron,Provide high flow rates and superior filtration efficiency,protect fuels from particles such as rust,sand,dirt and water.With protective sheet to prevent the filter element from being destroyed or deformed by pressure. Top cap:with 1" NPT pipe fittings inlet and outlet marked at the top of the cap. Hyaline bowl:Makes it easy to visual monitor the fuel flow,the fuel flow will slow down when you need to replace the element.Drain valve installed at the bottom to drain water. Feature:Flow rate max 25 gpm.Working pressure up to 150 psi.Gravity flow rate is approximately 5 gpm.

Read more less

Features Perfect Fitment: Compatible with 2007-2021 Jeep Wrangler JK & JL Unlimited 2-Door and 4-Door models OEM Replacement: Replaces part number 68194821AA for direct fit installation Premium Material: Made of high-quality durable rubber, corrosion-resistant and long-lasting Effective Protection: Prevents water, dirt, and sand from entering floor pan during off-road adventures Easy Installation: Plug-and-play design installs in seconds, no tools required Compatibility Fitment: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 Jeep Wrangler JK JKU JL JLU Unlimited (2-Door & 4-Door) FAQ Q: Will these fit my 2020 Jeep Wrangler JL? A: Yes, these drain stopples are compatible with Jeep Wrangler JL models from 2018-2021. Q: Are these difficult to install? A: No, they are designed for plug-and-play installation and can be installed in seconds without any tools. Q: What material are they made of? A: They are made of high-quality durable rubber that is corrosion-resistant and built to last.

Read more less

【Fitment】:For roof racks, Crossbars or T-slot roofs.【Secure Your Gear】：Keep heavy loads from shifting around during transport; these load stops are designed to slide into the T channels of your rack and they allow you to hold items in place and also to use as a tie-down point.【Durable design】:Made of 304 stainless steel with a thickness of 3mm, the surface is smooth and free of burrs, and is treated with wire drawing and polishing,Can be used for many years.【Be applicable】:When used, move at any time according to the location of the item.Comes with hooks and closed ring, fixed rope can be easily wrapped. Load Stops attaches to your crossbars and secures lumber, ladders, canoes and more【Note】:Before purchasing, please confirm whether the bottom groove is suitable for your luggage rack crossbar.If there is any problem with the received product, you can contact us at any time.

Read more less

Part Number: 170112UPC: 9332018027375Warranty: unspecified length Feature(s):Incl. Manifold4 Ports To Connect Up To 4 Breather LinesAir Filter PortAir Filter AssyPush In FittingsPlugsTubingScrewsCable Ties

Read more less

Fitment: Perfect fits American Motors models, Chevy models, Truck models, GMC models, Pontiac models, Cadillac, Buick, Chrysler, Dodge, Pickups, Cherokee. ( See specific model and year in FITMENT on description ) Compatible: It can works with tilt columns, Not fits for telescopic. It is only 5 inches deep from the end of the spline to the top of the adapter. So please measure the spline length before purchase. Design: Designed for most aftermarket GM 36 count splines steering columns, includes Flaming River and Ididit columns. Material: Made of high quality billet aluminum with black powder coated on the surface. It is more durable and hardness, wear resistance and long service life. Package: Package includes 1 X Steering wheel adapter, 6 X small Allen bolts, 6 X lager Allen bolts, 1 X Allen wrench, 1 X metal ring, 1 X bell shaped wire, 1 X black plastic sleeve.

Read more less

Fits Toyota Tundra and Tacoma. Material: Made of stainless steel iron, black oxidation treatment, strong corrosion resistance, long service life, sturdy and durable. Feature: Use in extreme conditions will not break, use fewer nuts to ensure you have enough contact points for safety. Install additional custom cleats, tie-downs, D-rings, bike racks, etc., using 3/8"-16 fully threaded holes to securely mount in deck/side rails on Tacoma and Tundra. Package Includes: 5 rail nut tie down tools.

Read more less