Products

Fits Polaris RZR 900/1000 and Ranger models with a 44mm wheel bearing Fitment ATV, UTV or SxS models,that has a 44MM wheel bearing.Before you purchase, you need to confirm the model Non-slip grip design,Knurled surface provides a non-slip grip and machined from high-grade 6061 T6 Aircraft Aluminum Precision step bored in order to provide clearance for the CV Shaft and reduce back pressure Designed Tapered housing with an O-Ring seal allows for all of the grease to be applied instead of wasted  The item Fitment these models: Front and Rear Axle - RZR XP 1000 - RZR RS1 - RZR XP 900 - RZR XP 4 900 - RZR XP 4 1000 - RZR 4 900 - RZR 900 - SCRAMBLER 850 - SCRAMBLER XP 850 - SCRAMBLER XP 1000 - SPORTSMAN 500 - SPORTSMAN 550 - SPORTSMAN 850 - SPORTSMAN SP 850 - SPORTSMAN XP 550 - SPORTSMAN XP 1000 - SPORTSMAN X2 550 - SPORTSMAN X2 850 Front Only:   - RZR 4 800 - RZR 570 - RZR 800 - RZR S 800 - RANGER 570 - RANGER 800 - RANGER 900 - RANGER CREW 570 - RANGER CREW 800 - RANGER CREW 900 Rear Only:  - Forest 850 EU - Forest 1000 EU : 2015 -General : 2016

Read more less

[Size Parameters]: One 40mm and one 1 1/2 inches (38mm). Product length is 1.8 inches. [Fitment]: Fits 1 1/2" standard inlet and outlet, you can use this filter hose conversion kit to connect above ground pool hose with 1 1/2" NPT thread female PVC adapter/connector. [Function]: This product can connect the above-ground filter hose to the pool filter pump. [Material]: The product is made of durable plastic, which is a standard configuration for pool accessories and connectors. Reduce the potential for leakage. [Package includes]: 2*filter hose conversion adapter, 2*O-rings, 2*Washers,1*PTFE tape.

Read more less

[Size Parameters]: One 40mm and one 1 1/2 inches (38mm). Product length is 1.8 inches. [Fitment]: Fits 1 1/2" standard inlet and outlet, you can use this filter hose conversion kit to connect above ground pool hose with 1 1/2" NPT thread female PVC adapter/connector. [Function]: This product can connect the above-ground filter hose to the pool filter pump. [Material]: The product is made of durable plastic, which is a standard configuration for pool accessories and connectors. Reduce the potential for leakage. [Package includes]: 4*filter hose conversion adapter, 4*O-rings, 4*Washers,2*PTFE tape.

Read more less

[Material]: This product is made of CPVC and PVC plastic. [Features]: The product can withstand the pressure up to 150 PSI, so it is suitable for the spa and water facilities that need high flow. And it is resistant to chemical corrosion, and the plastic material is not easy to rust. [Function]: It is used for turning, closing or mixing water flow, and can instantly regulate the valve position; It is connected to the entrance of any port. [Design]: Highly sealed diverter valve is applicable to most swimming pool pumps, serving automation. [Package includes]: 1 * 3 Port PVC diverter valve.(If you need installation instructions after purchasing this product, please feel free to contact us)

Read more less

[Material]: This product is made of CPVC and PVC plastic. [Features]: The product can withstand the pressure up to 150 PSI, so it is suitable for the spa and water facilities that need high flow. And it is resistant to chemical corrosion, and the plastic material is not easy to rust. [Function]: It is used for turning, closing or mixing water flow, and can instantly regulate the valve position; It is connected to the entrance of any port. [Design]: Highly sealed diverter valve is applicable to most swimming pool pumps, serving automation. [Package includes]: 1 * 2 Port PVC diverter valve.(If you need installation instructions after purchasing this product, please feel free to contact us)

Read more less

Troubleshooting Solution: If your heater occasionally fails to enter swimming pool mode or if buttons are unresponsive, this replacement pad can effectively solve these issues.Perfect Fit: 472610Z switch membrane pad compatibility with pool and spa heater electrical systems, ensuring a seamless replacement experience.Friendly Design: The intuitive layout of buttons on the membrane pad ensures ease of use, while clearly marked functions make operation a breeze.Easy Installation: The pad's attachment mechanism simplifies installation, so you can have your heating system up and running quickly.Please Note: Turn off the power supply before installation.

Read more less

Compatible with fuel types:Fits common fuels such as unleaded gas,diesel,fuel oil,up to 20% biodiesel and related additives. Fuel filter element:30 micron,Provide high flow rates and superior filtration efficiency,protect fuels from particles such as rust,sand,dirt and water.With protective sheet to prevent the filter element from being destroyed or deformed by pressure. Top cap:with 1" NPT pipe fittings inlet and outlet marked at the top of the cap. Hyaline bowl:Makes it easy to visual monitor the fuel flow,the fuel flow will slow down when you need to replace the element.Drain valve installed at the bottom to drain water. Feature:Flow rate max 25 gpm.Working pressure up to 150 psi.Gravity flow rate is approximately 5 gpm.

Read more less

Features:  No computer required  Easy installation Low cost  No internal mods required; easily removed for computer controlled upgrade at a later date.  Complete kit; no other sensors or parts needed. OEM quality case connector with wire guard and TXL wire. Extruded aluminum box for durability.   Indicator light for converter lock up.   Operation: Functions like a full manual valve body; whatever gear you select that is the gear the trans will be in. Gear changes made with factory column shifter or floor mounted shifter. Shifter must have 7 positions PRND321 Transmission will not shift up or down without moving the shifter. Maintains OEM forward shift pattern and engine braking on downshifts. Operates with continuous full line pressure for firmer shifts, less clutch slippage and cooler operating temperatures. Torque converter lock up with included switch and indicator light.  Note; does not release like a traditional transbrake.  Includes: Complete installation and operation instructions, rocker switch, light and connectors.

Read more less

1.Fitment: for 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Jeep Wrangler JK JKU JL2.Number: 68194821AA replacement plug3.Function:during the off-road process, the Floor Pan Drain Plug can effectively prevent water, dirt and sand from entering the floor of the car, keeping the floor clean and dry at all times4.Easy to install:plug and play, Installs in Seconds5.Material:Made of high quality rubber, corrosion resistant

Read more less

【Fitment】:For roof racks, Crossbars or T-slot roofs.【Secure Your Gear】：Keep heavy loads from shifting around during transport; these load stops are designed to slide into the T channels of your rack and they allow you to hold items in place and also to use as a tie-down point.【Durable design】:Made of 304 stainless steel with a thickness of 3mm, the surface is smooth and free of burrs, and is treated with wire drawing and polishing,Can be used for many years.【Be applicable】:When used, move at any time according to the location of the item.Comes with hooks and closed ring, fixed rope can be easily wrapped. Load Stops attaches to your crossbars and secures lumber, ladders, canoes and more【Note】:Before purchasing, please confirm whether the bottom groove is suitable for your luggage rack crossbar.If there is any problem with the received product, you can contact us at any time.

Read more less

Part Number: 170112UPC: 9332018027375Warranty: unspecified length Feature(s):Incl. Manifold4 Ports To Connect Up To 4 Breather LinesAir Filter PortAir Filter AssyPush In FittingsPlugsTubingScrewsCable Ties

Read more less

1.Replaces existing damaged intake, Just replace and ride again.2.REPLACES OEM NUMBER:4XE-13586-00-00,93210-35537-00,90450-49001-00.3.Fits:Yamaha Models 1999 - 2004 BEAR TRACKER YFM 250.4.Package includes:1x Intake boot,1x FREE O-Ring,1x FREE Clamp.

Read more less

Fitment: Perfect fits American Motors models, Chevy models, Truck models, GMC models, Pontiac models, Cadillac, Buick, Chrysler, Dodge, Pickups, Cherokee. ( See specific model and year in FITMENT on description ) Compatible: It can works with tilt columns, Not fits for telescopic. It is only 5 inches deep from the end of the spline to the top of the adapter. So please measure the spline length before purchase. Design: Designed for most aftermarket GM 36 count splines steering columns, includes Flaming River and Ididit columns. Material: Made of high quality billet aluminum with black powder coated on the surface. It is more durable and hardness, wear resistance and long service life. Package: Package includes 1 X Steering wheel adapter, 6 X small Allen bolts, 6 X lager Allen bolts, 1 X Allen wrench, 1 X metal ring, 1 X bell shaped wire, 1 X black plastic sleeve.

Read more less

Fits Toyota Tundra and Tacoma. Material: Made of stainless steel iron, black oxidation treatment, strong corrosion resistance, long service life, sturdy and durable. Feature: Use in extreme conditions will not break, use fewer nuts to ensure you have enough contact points for safety. Install additional custom cleats, tie-downs, D-rings, bike racks, etc., using 3/8"-16 fully threaded holes to securely mount in deck/side rails on Tacoma and Tundra. Package Includes: 5 rail nut tie down tools.

Read more less

⭐-High quality ABS material for enhancing its strength and durability, anti-impact, anti-UV. ⭐-Spring loaded hinge for strong clamp, not easy to fall off. ⭐-The latch has been good integrated, which ensures the door can be properly shut. ⭐-Perfectly replaces for sun damaged/broken latches/catches/holders. ⭐-Solid built, practical and high reliability, provides long time service. ⭐-Easy to Install, it is mainly used for RV, trailers and campers.

Read more less

Material: 409 Stainless Steel,Surface polishing Body Length: 14"; Body Width: 8",Overall Length: 20" Inlet: 5" ID - Center; Outlet: 5" ID - Center Stainless Steel Mesh Wrapped - Fiberglass Packing Straight-through flow path for maximum performance Non-directional design - install whichever way suits your setup Enhance the sonic signature of your truck while also improving its performance The muffler is suitable for various car models from Cummins to Duramax and Powerstroke Vehicle FitmentOur mufflers fit all Powerstroke, Cummins and Duramax models available on our website. This will fit any 5" aftermarket straight pipe exhaust system. Feature:Non-directional design, allowing you to install the muffler in however way suites your truck and exhaust system best.Stainless steel construction for lifelong protection Internal stainless steel mesh & fiberglass construction to withstand harsh conditions and advanced technology to absorb unwanted interior resonance.Straight-through design to reduce back pressure and enhance performance Use our diesel performance exhaust muffler to enhance the sound characteristics of the truck while improving its performance. There are four models to choose from: T409 polished 2.5-inch muffler,T409 polished 3-inch muffler,T409 polished 4-inch muffler and T409 polished 5-inch muffler. You can choose the model that is most suitable for your ride.

Read more less

Material: Aluminum This LS Truck intake manifold EGR and EVAP block off complete kit is a perfect replacement for your old intake manifold, ensuring a seamless installation process. Made from CNC milled aircraft-grade billet aluminum, this kit guarantees exceptional durability and strength, providing long-lasting performance. Effective EGR and EVAP Block Off: With this kit, you can easily block off the EGR and EVAP systems, improving engine performance and simplifying maintenance. Fitment:For LS Truck Replacement for Silverado LQ4 LQ9 5.3 6.0Package:1 * EGR Block Off Plate2 * Bolt

Read more less

Material: Aluminum This LS Truck intake manifold EGR and EVAP block off complete kit is a perfect replacement for your old intake manifold, ensuring a seamless installation process. Made from CNC milled aircraft-grade billet aluminum, this kit guarantees exceptional durability and strength, providing long-lasting performance. Effective EGR and EVAP Block Off: With this kit, you can easily block off the EGR and EVAP systems, improving engine performance and simplifying maintenance. Fitment:Truck intake manifold EGR and EVAP block off complete kit. For use with all LS truckPackage:1 * EVAP block off kit2 * EGR Tube Plug Intake Block Off Plate3 * Exhaust Block Off PlateDescription:Direct Replacement: This LS Truck intake manifold EGR and EVAP block off complete kit is a perfect replacement for your old intake manifold, ensuring a seamless installation process.Wide Compatibility: Designed for use with all LS truck intake/exhaust manifolds that originally came with an EGR/EVAP system, this kit offers broad compatibility for a range of vehicles.Premium Billet Aluminum Construction: Made from CNC milled aircraft-grade billet aluminum, this kit guarantees exceptional durability and strength, providing long-lasting performance.Effective EGR and EVAP Block Off: With this kit, you can easily block off the EGR and EVAP systems, improving engine performance and simplifying maintenance.Precision Manufacturing: The CNC milling process ensures precise construction, resulting in a perfect fit for your LS truck intake/exhaust manifold. Enjoy reliable performance and compatibility without compromise.

Read more less

Material: Aluminum This LS Truck intake manifold EGR and EVAP block off complete kit is a perfect replacement for your old intake manifold, ensuring a seamless installation process. Made from CNC milled aircraft-grade billet aluminum, this kit guarantees exceptional durability and strength, providing long-lasting performance. Effective EGR and EVAP Block Off: With this kit, you can easily block off the EGR and EVAP systems, improving engine performance and simplifying maintenance. Fitment:For LS Truck Replacement for Silverado LQ4 LQ9 5.3 6.0Package Content:1 * EVAP block off1 * Bolt

Read more less

Material: Aluminum This LS Truck intake manifold EGR and EVAP block off complete kit is a perfect replacement for your old intake manifold, ensuring a seamless installation process. Made from CNC milled aircraft-grade billet aluminum, this kit guarantees exceptional durability and strength, providing long-lasting performance. Effective EGR and EVAP Block Off: With this kit, you can easily block off the EGR and EVAP systems, improving engine performance and simplifying maintenance. Fitment:For LS Truck Replacement for Silverado LQ4 LQ9 5.3 6.0Package list:1*Car Tube Plug Intake Block-off Plate1*Bolt

Read more less

Material: stainless steel 304. The crankshaft is made of stainless steel, which is more durable than ordinary iron products. Never rust, better protect the crank.Bushing inner diameter 5/8", outer diameter 3/4", sleeve length about 3", keyway 3/16', stepped key length about 3"The sleeve key and stepped key are designed to fit perfectly into the 3/16-inch keyway and fit on a 5/8-inch diameter crankshaft, and enlarged to 3/4-diameter through a 3/16-inch key seatReplace motors with shafts of different diameters, and replace pulleys with different speeds or belts.Used in conjunction with gas engine crankshafts to enlarge the crank diameter to fit pulleys, gearboxes, etc.

Read more less

  Micron rating:10 micron at 98% water removal efficiency.Used as a primary or secondary / final filtration. Handle on the endcap:Makes it easy to install/remove the filter with your hand. Cross reference:2010TM-OR,TP995,PF598-10,P552010,FS1208,FS20101,FS20102,CS5043,25011443,RE11325,L2021F,FD 807,861014,F53148,33208. Replacement interval every 10,000 miles or every 500 hours Fitment:Fuel Filter Element Replacement for Marine 500 Series Turbine 500FG10,500FG1210,500FG2410 and 75500FGX10. Package includes:1 x 2010TM-OR fuel filter element with o-ring.

Read more less

Handle on the endcap:Makes it easy to install/remove the filter with your hand. Micron rating:30 micron at 98% water removal efficiency.Used as a primary filtration. Cross reference: 2010PM-OR, PF598-30, FS20103, FS19575, CS8597, 3917924, 33794. Fitment: Fuel Filter Element Replacement for Marine 500 Series Turbine 500FG30 500FG1230 500FG2430 and 75500FGX30. Package includes:1 x 2010PM-OR fuel filter element with o-ring.

Read more less

Compatible: Compatible with Thule profession bar, wing bar, Aero bar, Rhino heavy duty T-bolts and grooved nuts. Fitment: Fits for most roof racks, cargo cages and all awning size. Can be installed in the inverted or vertical position of Thule square bar and Rhino heavy bar. Material: Made of high quality steel with Zinc plated and black powder coated on the surface. High strength and hardness, anti-rust and long service life. Design: The bracket is designed with welded gusset plate to provide additional strength when mounting awing. Pre-drilled can be used two or three 8mm bolts, and three 6mm slotted holes for the installation of the awning. Package Include: Just two awning bracket. NOT include additional hardware. Part number: ZJ-813402 Fit type: Universal

Read more less