Products

Product Overview Restore your 2007-2011 Mercedes-Benz S65 AMG's handling and ride quality with this premium Lower Control Arm & Ball Joint Assembly. Manufactured to meet or exceed OEM specifications, iFJF control arms deliver precise steering response, reduced road noise, and long-lasting durability. Each unit features pre-installed ball joints, corrosion-resistant coating, and exact dimensional fitment for hassle-free installation. Key Features Pre-Assembled Ball Joints: Factory-installed and lubricated for quick bolt-on replacement — no pressing required OEM-Spec Engineering: Precision-manufactured to exact factory dimensions for guaranteed fitment Heavy-Duty Construction: Forged steel/aluminum construction withstands demanding driving conditions Corrosion-Resistant Coating: E-coat finish protects against rust, salt, and road debris for extended service life Enhanced Bushing Design: High-durometer rubber bushings absorb vibration and minimize NVH Complete Pair: Includes both left and right side control arms for a balanced suspension rebuild Vehicle Compatibility Year Range Make Model Position 2007 Mercedes-Benz S65 AMG Front Lower 2011 Mercedes-Benz S65 AMG Front Lower Technical Specifications Part Number CA-0047 Position Front Lower / Rearward Quantity 2 Pieces (Left + Right) Ball Joint Pre-Assembled & Greased Material Forged Steel / Aluminum Finish E-Coat Anti-Corrosion Symptoms of Worn Control Arms Clunking or knocking noises from front suspension over bumps Uneven or premature tire wear patterns Steering wheel vibration or wandering at highway speeds Vehicle pulling to one side during braking Excessive body roll in corners Installation Guide Installation time: 2-4 hours per side. Professional alignment is required after installation. We recommend having a qualified mechanic perform this replacement. Always replace control arms in pairs for balanced handling. Frequently Asked Questions Q: Will this fit my 2007-2011 Mercedes-Benz S65 AMG?A: Yes. This control arm pair is designed specifically for the 2007-2011 Mercedes-Benz S65 AMG. Please verify your vehicle's exact year and sub-model before ordering. Q: Do these come with ball joints installed?A: Yes. Each control arm arrives with a pre-assembled, lubricated ball joint ready for direct bolt-on installation. Q: Do I need an alignment after installation?A: Yes. A professional wheel alignment is absolutely required after replacing control arms to ensure proper handling and tire wear. Q: Are these sold individually or as a pair?A: This listing includes both left and right side control arms as a matched pair. Q: How do these compare to OEM?A: These control arms meet or exceed OEM specifications in materials, fitment, and durability — at a fraction of dealer pricing. Q: What's the warranty?A: iFJF provides a 1-year / 12,000-mile warranty against manufacturing defects. Q: Do I need any special tools?A: Standard metric socket set and a ball joint separator tool are recommended. A torque wrench is essential for proper installation. Related Products Complete your suspension rebuild with these related parts: Mercedes-Benz Suspension Parts — Full range of suspension components Control Arms & Ball Joints — Complete control arm selection Tie Rods & Steering — Steering linkage components

Read more less

Product Overview Restore your 2007-2014 BMW X5 E70 / X6 E71's handling and ride quality with this premium Front Control Arm Kit. Manufactured to meet or exceed OEM specifications, iFJF control arms deliver precise steering response, reduced road noise, and long-lasting durability. Each unit features pre-installed ball joints, corrosion-resistant coating, and exact dimensional fitment for hassle-free installation. Key Features Pre-Assembled Ball Joints: Factory-installed and lubricated for quick bolt-on replacement — no pressing required OEM-Spec Engineering: Precision-manufactured to exact factory dimensions for guaranteed fitment Heavy-Duty Construction: Forged steel/aluminum construction withstands demanding driving conditions Corrosion-Resistant Coating: E-coat finish protects against rust, salt, and road debris for extended service life Enhanced Bushing Design: High-durometer rubber bushings absorb vibration and minimize NVH Complete Pair: Includes both left and right side control arms for a balanced suspension rebuild Vehicle Compatibility Year Range Make Model Position 2007 BMW X5 E70 / X6 E71 Front Lower 2014 BMW X5 E70 / X6 E71 Front Lower Technical Specifications Part Number CA-0029 Position Front Lower / Rearward Quantity 2 Pieces (Left + Right) Ball Joint Pre-Assembled & Greased Material Forged Steel / Aluminum Finish E-Coat Anti-Corrosion Symptoms of Worn Control Arms Clunking or knocking noises from front suspension over bumps Uneven or premature tire wear patterns Steering wheel vibration or wandering at highway speeds Vehicle pulling to one side during braking Excessive body roll in corners Installation Guide Installation time: 2-4 hours per side. Professional alignment is required after installation. We recommend having a qualified mechanic perform this replacement. Always replace control arms in pairs for balanced handling. Frequently Asked Questions Q: Will this fit my 2007-2014 BMW X5 E70 / X6 E71?A: Yes. This control arm pair is designed specifically for the 2007-2014 BMW X5 E70 / X6 E71. Please verify your vehicle's exact year and sub-model before ordering. Q: Do these come with ball joints installed?A: Yes. Each control arm arrives with a pre-assembled, lubricated ball joint ready for direct bolt-on installation. Q: Do I need an alignment after installation?A: Yes. A professional wheel alignment is absolutely required after replacing control arms to ensure proper handling and tire wear. Q: Are these sold individually or as a pair?A: This listing includes both left and right side control arms as a matched pair. Q: How do these compare to OEM?A: These control arms meet or exceed OEM specifications in materials, fitment, and durability — at a fraction of dealer pricing. Q: What's the warranty?A: iFJF provides a 1-year / 12,000-mile warranty against manufacturing defects. Q: Do I need any special tools?A: Standard metric socket set and a ball joint separator tool are recommended. A torque wrench is essential for proper installation. Related Products Complete your suspension rebuild with these related parts: BMW Suspension Parts — Full range of suspension components Control Arms & Ball Joints — Complete control arm selection Tie Rods & Steering — Steering linkage components

Read more less

Product Overview Restore your 2007-2014 BMW X5 E70 / X6 E71's handling and ride quality with this premium Lower Forward Control Arm & Ball Joint Assembly. Manufactured to meet or exceed OEM specifications, iFJF control arms deliver precise steering response, reduced road noise, and long-lasting durability. Each unit features pre-installed ball joints, corrosion-resistant coating, and exact dimensional fitment for hassle-free installation. Key Features Pre-Assembled Ball Joints: Factory-installed and lubricated for quick bolt-on replacement — no pressing required OEM-Spec Engineering: Precision-manufactured to exact factory dimensions for guaranteed fitment Heavy-Duty Construction: Forged steel/aluminum construction withstands demanding driving conditions Corrosion-Resistant Coating: E-coat finish protects against rust, salt, and road debris for extended service life Enhanced Bushing Design: High-durometer rubber bushings absorb vibration and minimize NVH Complete Pair: Includes both left and right side control arms for a balanced suspension rebuild Vehicle Compatibility Year Range Make Model Position 2007 BMW X5 E70 / X6 E71 Front Lower 2014 BMW X5 E70 / X6 E71 Front Lower Technical Specifications Part Number CA-0027 Position Front Lower / Rearward Quantity 2 Pieces (Left + Right) Ball Joint Pre-Assembled & Greased Material Forged Steel / Aluminum Finish E-Coat Anti-Corrosion Symptoms of Worn Control Arms Clunking or knocking noises from front suspension over bumps Uneven or premature tire wear patterns Steering wheel vibration or wandering at highway speeds Vehicle pulling to one side during braking Excessive body roll in corners Installation Guide Installation time: 2-4 hours per side. Professional alignment is required after installation. We recommend having a qualified mechanic perform this replacement. Always replace control arms in pairs for balanced handling. Frequently Asked Questions Q: Will this fit my 2007-2014 BMW X5 E70 / X6 E71?A: Yes. This control arm pair is designed specifically for the 2007-2014 BMW X5 E70 / X6 E71. Please verify your vehicle's exact year and sub-model before ordering. Q: Do these come with ball joints installed?A: Yes. Each control arm arrives with a pre-assembled, lubricated ball joint ready for direct bolt-on installation. Q: Do I need an alignment after installation?A: Yes. A professional wheel alignment is absolutely required after replacing control arms to ensure proper handling and tire wear. Q: Are these sold individually or as a pair?A: This listing includes both left and right side control arms as a matched pair. Q: How do these compare to OEM?A: These control arms meet or exceed OEM specifications in materials, fitment, and durability — at a fraction of dealer pricing. Q: What's the warranty?A: iFJF provides a 1-year / 12,000-mile warranty against manufacturing defects. Q: Do I need any special tools?A: Standard metric socket set and a ball joint separator tool are recommended. A torque wrench is essential for proper installation. Related Products Complete your suspension rebuild with these related parts: BMW Suspension Parts — Full range of suspension components Control Arms & Ball Joints — Complete control arm selection Tie Rods & Steering — Steering linkage components

Read more less

Product Overview The iFJF High Flow Intake Elbow is engineered for 2007-2018 6.7L Cummins diesel engines found in Dodge Ram 2500/3500/4500/5500. This precision-machined kit is designed to replace restrictive factory components, improving exhaust flow, reducing exhaust gas temperatures (EGTs), and enhancing overall engine efficiency. Manufactured from high-grade materials with exact fitment tolerances, this kit delivers reliable performance for off-road and competition applications. Key Features Precision CNC-Machined: Manufactured to exact OEM specifications for seamless bolt-on installation Heavy-Duty Construction: Crafted from premium materials for maximum durability under extreme conditions Improved Airflow Dynamics: Optimized internal geometry reduces turbulence and enhances flow efficiency Corrosion-Resistant Finish: Advanced surface treatment prevents rust and oxidation in harsh environments Complete Installation Kit: Includes all necessary gaskets, bolts, and hardware for straightforward installation EGT Reduction: Lowers exhaust gas temperatures for improved engine longevity Vehicle Compatibility Year Make Model Engine 2007 Chevrolet Silverado 2500HD/3500HD 6.6L Duramax 2018 Chevrolet Silverado 2500HD/3500HD 6.6L Duramax Technical Specifications Part Number ER-0020 Material Billet Aluminum / Stainless Steel Compatible Engine 6.7L Cummins Application Off-Road / Competition Use Only Installation Bolt-On (Professional Recommended) Why Choose iFJF? With years of experience in the diesel performance aftermarket, iFJF delivers components that meet or exceed OEM specifications. Every product undergoes rigorous quality control inspection before shipping. Our 6.7L Cummins Intake Elbow is trusted by diesel enthusiasts and professional mechanics across North America for its reliability and performance gains. Installation Notes Professional installation is recommended. Basic hand tools required. Estimated installation time: 2-4 hours depending on vehicle configuration. Always disconnect the battery before beginning installation. ⚠️ Off-Road Disclaimer: This product is intended for off-road / competition vehicles only. Not for use on public highways. Please check your local regulations before installation. Frequently Asked Questions Q: Will this fit my 2007 6.7L Cummins truck?A: Yes. This kit is designed for 2007-2018 Dodge Ram 2500/3500/4500/5500 with the 6.7L Cummins engine. Please verify your exact year and model before ordering. Q: Is professional installation required?A: While experienced DIY mechanics can install this kit, we recommend professional installation due to the complexity of accessing EGR components. Q: What tools are needed for installation?A: Standard metric socket set, wrenches, torque wrench, and basic hand tools. Some models may require specialty tools for hard-to-reach bolts. Q: Does this kit come with gaskets and hardware?A: Yes. All necessary gaskets, bolts, nuts, and installation hardware are included in the package. Q: Will this improve fuel economy?A: Many users report improved fuel economy after installation, though results vary based on driving conditions and vehicle configuration. Q: Is this compatible with aftermarket tuners?A: Yes. This hardware kit is compatible with most aftermarket tuning solutions for the 6.7L Cummins platform. Q: What is the warranty on this product?A: iFJF offers a 1-year warranty against manufacturing defects. Please retain your purchase receipt. Related Products Explore more diesel performance parts in our EGR Delete collection: 6.7L Cummins EGR Delete Kits — Complete selection of EGR solutions Diesel Exhaust Systems — Upgrade your exhaust for maximum flow Intake Manifolds & Elbows — High-flow intake upgrades

Read more less

Product Overview The iFJF EGR Valve & Cooler Delete Kit is engineered for 2007-2018 6.7L Cummins diesel engines found in Dodge Ram 2500/3500/4500/5500. This precision-machined kit is designed to replace restrictive factory components, improving exhaust flow, reducing exhaust gas temperatures (EGTs), and enhancing overall engine efficiency. Manufactured from high-grade materials with exact fitment tolerances, this kit delivers reliable performance for off-road and competition applications. Key Features Precision CNC-Machined: Manufactured to exact OEM specifications for seamless bolt-on installation Heavy-Duty Construction: Crafted from premium materials for maximum durability under extreme conditions Improved Airflow Dynamics: Optimized internal geometry reduces turbulence and enhances flow efficiency Corrosion-Resistant Finish: Advanced surface treatment prevents rust and oxidation in harsh environments Complete Installation Kit: Includes all necessary gaskets, bolts, and hardware for straightforward installation EGT Reduction: Lowers exhaust gas temperatures for improved engine longevity Vehicle Compatibility Year Make Model Engine 2007 Chevrolet Silverado 2500HD/3500HD 6.6L Duramax 2018 Chevrolet Silverado 2500HD/3500HD 6.6L Duramax Technical Specifications Part Number ER-0072 Material Billet Aluminum / Stainless Steel Compatible Engine 6.7L Cummins Application Off-Road / Competition Use Only Installation Bolt-On (Professional Recommended) Why Choose iFJF? With years of experience in the diesel performance aftermarket, iFJF delivers components that meet or exceed OEM specifications. Every product undergoes rigorous quality control inspection before shipping. Our 6.7L Cummins EGR Valve Delete Kit is trusted by diesel enthusiasts and professional mechanics across North America for its reliability and performance gains. Installation Notes Professional installation is recommended. Basic hand tools required. Estimated installation time: 2-4 hours depending on vehicle configuration. Always disconnect the battery before beginning installation. ⚠️ Off-Road Disclaimer: This product is intended for off-road / competition vehicles only. Not for use on public highways. Please check your local regulations before installation. Frequently Asked Questions Q: Will this fit my 2007 6.7L Cummins truck?A: Yes. This kit is designed for 2007-2018 Dodge Ram 2500/3500/4500/5500 with the 6.7L Cummins engine. Please verify your exact year and model before ordering. Q: Is professional installation required?A: While experienced DIY mechanics can install this kit, we recommend professional installation due to the complexity of accessing EGR components. Q: What tools are needed for installation?A: Standard metric socket set, wrenches, torque wrench, and basic hand tools. Some models may require specialty tools for hard-to-reach bolts. Q: Does this kit come with gaskets and hardware?A: Yes. All necessary gaskets, bolts, nuts, and installation hardware are included in the package. Q: Will this improve fuel economy?A: Many users report improved fuel economy after installation, though results vary based on driving conditions and vehicle configuration. Q: Is this compatible with aftermarket tuners?A: Yes. This hardware kit is compatible with most aftermarket tuning solutions for the 6.7L Cummins platform. Q: What is the warranty on this product?A: iFJF offers a 1-year warranty against manufacturing defects. Please retain your purchase receipt. Related Products Explore more diesel performance parts in our EGR Delete collection: 6.7L Cummins EGR Delete Kits — Complete selection of EGR solutions Diesel Exhaust Systems — Upgrade your exhaust for maximum flow Intake Manifolds & Elbows — High-flow intake upgrades

Read more less

Product Overview The iFJF EGR Delete Kit is engineered for 2007-2018 6.7L Cummins diesel engines found in Dodge Ram 2500/3500/4500/5500. This precision-machined kit is designed to replace restrictive factory components, improving exhaust flow, reducing exhaust gas temperatures (EGTs), and enhancing overall engine efficiency. Manufactured from high-grade materials with exact fitment tolerances, this kit delivers reliable performance for off-road and competition applications. Key Features Precision CNC-Machined: Manufactured to exact OEM specifications for seamless bolt-on installation Heavy-Duty Construction: Crafted from premium materials for maximum durability under extreme conditions Improved Airflow Dynamics: Optimized internal geometry reduces turbulence and enhances flow efficiency Corrosion-Resistant Finish: Advanced surface treatment prevents rust and oxidation in harsh environments Complete Installation Kit: Includes all necessary gaskets, bolts, and hardware for straightforward installation EGT Reduction: Lowers exhaust gas temperatures for improved engine longevity Vehicle Compatibility Year Make Model Engine 2007 Chevrolet Silverado 2500HD/3500HD 6.6L Duramax 2018 Chevrolet Silverado 2500HD/3500HD 6.6L Duramax Technical Specifications Part Number ER-0184 Material Billet Aluminum / Stainless Steel Compatible Engine 6.7L Cummins Application Off-Road / Competition Use Only Installation Bolt-On (Professional Recommended) Why Choose iFJF? With years of experience in the diesel performance aftermarket, iFJF delivers components that meet or exceed OEM specifications. Every product undergoes rigorous quality control inspection before shipping. Our 6.7L Cummins EGR Delete Kit is trusted by diesel enthusiasts and professional mechanics across North America for its reliability and performance gains. Installation Notes Professional installation is recommended. Basic hand tools required. Estimated installation time: 2-4 hours depending on vehicle configuration. Always disconnect the battery before beginning installation. ⚠️ Off-Road Disclaimer: This product is intended for off-road / competition vehicles only. Not for use on public highways. Please check your local regulations before installation. Frequently Asked Questions Q: Will this fit my 2007 6.7L Cummins truck?A: Yes. This kit is designed for 2007-2018 Dodge Ram 2500/3500/4500/5500 with the 6.7L Cummins engine. Please verify your exact year and model before ordering. Q: Is professional installation required?A: While experienced DIY mechanics can install this kit, we recommend professional installation due to the complexity of accessing EGR components. Q: What tools are needed for installation?A: Standard metric socket set, wrenches, torque wrench, and basic hand tools. Some models may require specialty tools for hard-to-reach bolts. Q: Does this kit come with gaskets and hardware?A: Yes. All necessary gaskets, bolts, nuts, and installation hardware are included in the package. Q: Will this improve fuel economy?A: Many users report improved fuel economy after installation, though results vary based on driving conditions and vehicle configuration. Q: Is this compatible with aftermarket tuners?A: Yes. This hardware kit is compatible with most aftermarket tuning solutions for the 6.7L Cummins platform. Q: What is the warranty on this product?A: iFJF offers a 1-year warranty against manufacturing defects. Please retain your purchase receipt. Related Products Explore more diesel performance parts in our Diesel Performance Parts collection: 6.7L Cummins EGR Delete Kits — Complete selection of EGR solutions Diesel Exhaust Systems — Upgrade your exhaust for maximum flow Intake Manifolds & Elbows — High-flow intake upgrades ⚠️ Off-Road / Competition Use Only: This product is intended for off-road or competition vehicles only. Not legal for highway use on emissions-controlled vehicles in the US and many other jurisdictions. Check local and federal regulations before purchasing. Removal of emissions equipment may void your vehicle warranty. 🔗 Cummins Diesel Resources & Maintenance 📖 Related Guides: Ram 6.7L Cummins Fuel Filter Replacement: Complete DIY Guide (2013–2018) Diesel Fuel Filter Maintenance — When to Replace (Duramax, Powerstroke & Cummins) 🔍 Shop All Cummins Parts → | EGR Delete Parts → | Fuel Filters →

Read more less

Product Overview Upgrade your 2008-2010 Ford 6.4L Powerstroke with this EGR Valve & Cooler Delete Kit from iFJF — engineered to eliminate the problematic factory EGR system on your F-250, F-350, or F-450 Super Duty. The 6.4L Powerstroke is notorious for EGR cooler failures that can lead to coolant loss, engine overheating, and catastrophic head gasket damage. This complete delete kit replaces the failure-prone EGR components with durable stainless steel block-off plates and a delete pipe, restoring reliability to your diesel engine. Why Delete the EGR on Your 6.4L Powerstroke? The factory EGR (Exhaust Gas Recirculation) system on the 6.4L Powerstroke recirculates hot exhaust gas and soot back into the intake manifold, causing carbon buildup, reduced performance, and elevated EGTs (exhaust gas temperatures). The EGR cooler is especially problematic — when it fails internally, coolant enters the combustion chamber, potentially causing hydrolock and complete engine failure. By deleting the EGR system, you eliminate these failure points entirely. Key Features Complete EGR System Removal — Includes EGR valve block-off plates and EGR cooler delete pipe for full system elimination 304 Stainless Steel Construction — Corrosion-resistant material engineered to withstand extreme exhaust gas temperatures up to 1,200°F Eliminates EGR Cooler Failure Risk — No more coolant loss, overheating, or head gasket damage from failed EGR coolers Reduced Carbon Buildup — No more exhaust soot being recirculated into your intake manifold, valves, and combustion chambers Improved Throttle Response — Cleaner intake air means faster turbo spool and better engine responsiveness Lower EGTs — Reduced exhaust gas temperatures for safer, more reliable engine operation under load and towing Direct Bolt-On Design — Engineered for straightforward installation (professional installation recommended) Compatibility Table Year Make Model Engine 2008 Ford F-250 / F-350 / F-450 / F-550 Super Duty 6.4L Powerstroke V8 Diesel 2009 Ford F-250 / F-350 / F-450 / F-550 Super Duty 6.4L Powerstroke V8 Diesel 2010 Ford F-250 / F-350 / F-450 / F-550 Super Duty 6.4L Powerstroke V8 Diesel Technical Specifications Specification Detail Material 304 Stainless Steel Application Off-Road / Competition Use Only Fitment 2008-2010 Ford 6.4L Powerstroke Installation Professional Installation Recommended Tuning Required Yes — ECU Tune Required to Disable EGR DTCs Includes Block-Off Plates, Delete Pipe, Gaskets, Bolts Installation Notes The EGR system on the 6.4L Powerstroke is integrated into the exhaust and intake plumbing. Removal requires mechanical expertise and proper tools. Key steps include: removing the intake manifold, disconnecting EGR cooler coolant lines (drain coolant first), removing the EGR valve and cooler assembly, and installing the delete components with new gaskets. Custom ECU tuning MUST be applied to disable EGR-related diagnostic trouble codes and prevent the engine from entering limp mode. ⚠️ Important Legal Notice OFF-ROAD / COMPETITION USE ONLY. This EGR delete kit is designed and sold solely for off-road and closed-course competition vehicles. It is NOT legal for use on public highways or on-road vehicles in the United States under the federal Clean Air Act and EPA regulations. It is the purchaser's responsibility to comply with all applicable federal, state, and local laws. Frequently Asked Questions Q: What's included in this EGR delete kit?A: This kit includes the EGR valve block-off plates, EGR cooler delete pipe, all necessary gaskets, bolts, and hardware for a complete installation on 2008-2010 Ford 6.4L Powerstroke engines. Q: Will this trigger a check engine light (CEL)?A: Yes. Removing the EGR system will set diagnostic trouble codes (DTCs). ECU tuning is required to disable EGR-related DTCs and prevent limp mode. This kit provides the hardware only — tuning is sold separately. Q: Is EGR delete legal for on-road use?A: OFF-ROAD / COMPETITION USE ONLY. EGR delete kits are not legal for on-road vehicles in the United States under EPA and CARB regulations. Please verify your local laws before purchase. Q: What material is this kit made from?A: All block-off plates and delete pipes are constructed from 304 stainless steel for maximum corrosion resistance and durability under extreme exhaust temperatures. Q: Do I need professional installation?A: Professional installation is highly recommended. Removing the EGR system requires mechanical expertise, proper tools, and ECU tuning capability. Installation instructions are not included. Q: What are the benefits of deleting the EGR system?A: On competition/off-road vehicles, removing EGR reduces carbon buildup in the intake, lowers EGTs, improves throttle response, and eliminates the risk of EGR cooler failure that can lead to catastrophic coolant loss. Q: Does this fit all 2008-2010 6.4L Powerstroke models?A: Yes. This kit fits 2008, 2009, and 2010 Ford F-250, F-350, F-450, and F-550 Super Duty trucks equipped with the 6.4L Powerstroke V8 diesel engine. Why Choose iFJF? At iFJF, we specialize in diesel performance parts for the North American aftermarket. Every product is precision-engineered to meet or exceed OEM specifications. We stand behind our quality with responsive customer support and fast shipping from our US warehouses. Thousands of diesel owners trust iFJF for their Powerstroke, Cummins, and Duramax builds. You May Also Need 6.4L Powerstroke 4" Cat & DPF Delete Pipe & EGR Kit — Complete emissions delete package 6.4L Powerstroke 4" Cat & DPF Delete Pipe — DPF/CAT removal for 2008-2010 Coolant Filtration Kit for Ford 6.0L/6.4L Powerstroke — Protect your cooling system

Read more less

Product Overview Restore your 2008-2013 Nissan Rogue's handling and ride quality with this 2-Piece Front Lower Control Arm Kit from iFJF. Worn control arms are a leading cause of steering wander, uneven tire wear, and clunking noises in the Rogue platform. This complete kit includes both the left and right front lower control arms with pre-installed ball joints and premium rubber bushings — everything you need for a complete front-end refresh in one box. Signs Your Control Arms Need Replacement Clunking or knocking noises from the front suspension when going over bumps or during turning Steering wander or looseness — the vehicle drifts or doesn't track straight on the highway Uneven tire wear, especially inner or outer edge wear on front tires Vibration through the steering wheel at highway speeds Visible bushing cracks or deterioration during vehicle inspection Excessive play in the ball joint when the wheel is lifted and rocked Key Features Complete 2-Piece Kit — Includes both left (driver) and right (passenger) front lower control arms Pre-Installed Ball Joints — No need to press in ball joints separately; ready to install out of the box Premium Rubber Bushings — OEM-grade bushing material for factory ride quality and noise isolation Forged Steel Construction — Meets or exceeds OEM specifications for strength and durability Direct Bolt-On Replacement — No modifications required; same fitment as factory control arms Corrosion-Resistant Coating — Protective finish for long service life in all weather conditions Compatibility Year Make Model Position 2008 Nissan Rogue (All Trims, FWD & AWD) Front Lower L+R 2009 Nissan Rogue (All Trims, FWD & AWD) Front Lower L+R 2010 Nissan Rogue (All Trims, FWD & AWD) Front Lower L+R 2011 Nissan Rogue (All Trims, FWD & AWD) Front Lower L+R 2012 Nissan Rogue (All Trims, FWD & AWD) Front Lower L+R 2013 Nissan Rogue (All Trims, FWD & AWD) Front Lower L+R Technical Specifications Specification Detail Material Forged Steel Bushing Type Premium Rubber Ball Joint Pre-Installed Quantity 2-Piece (Left + Right) Finish Corrosion-Resistant Coating Frequently Asked Questions Q: Will this fit my 2008-2013 Nissan Rogue?A: Yes. This kit is specifically designed for 2008 through 2013 Nissan Rogue models. Both FWD and AWD configurations are supported. Q: What's included in this kit?A: This 2-piece kit includes both the left (driver side) and right (passenger side) front lower control arms, complete with pre-installed ball joints and rubber bushings. Q: Do I need an alignment after installation?A: Yes. A professional wheel alignment is strongly recommended after replacing control arms to ensure proper tire wear, handling, and steering response. Q: What are the signs my control arms need replacement?A: Common symptoms include clunking noises over bumps, uneven tire wear, steering wander, vibration through the steering wheel, and visible bushing deterioration. Q: Are these OEM quality?A: These control arms are manufactured to meet or exceed OEM specifications for fit, durability, and performance. They feature forged steel construction with premium rubber bushings and ball joints. Why Choose iFJF? iFJF delivers quality suspension components at competitive prices. Our control arms are manufactured in ISO-certified facilities with rigorous quality control at every stage. We back every product with responsive customer support and fast shipping. You May Also Need Front Lower Control Arms for 2005-2010 Honda Odyssey 8pc Control Arm Kit for 2004-2012 Chevy Malibu

Read more less

Product Overview Simplify your Super Duty upfitter switch installation with this In-Dash Upfitter Switch Wiring Harness Jumper Kit from iFJF. The 2009-2010 Ford F-250/F-350/F-450/F-550 Super Duty trucks come with factory blunt-cut pass-through wires for upfitter switches — but connecting them can be a tedious wiring project. This plug-and-play jumper harness replaces Ford OEM AL3Z-13D730-AA and provides a clean, professional connection between your upfitter switches and the blunt-cut wires, with no cutting or splicing required. Key Features Plug-and-Play Installation — Direct connection to factory blunt-cut wires; no cutting, splicing, or soldering required OEM AL3Z-13D730-AA Replacement — Identical fit and function to the genuine Ford harness at a fraction of the cost Pre-Terminated Connectors — Clean, professional-grade terminations for reliable electrical connections Correct Wire Gauge — Meets or exceeds OEM wire specifications for each circuit's rated amperage Factory-Length Harness — Proper wire lengths for clean routing behind the dash without excess slack Complete Kit — Includes all connectors, terminals, and wire leads needed for installation Compatibility Year Make Model 2009 Ford F-250 / F-350 / F-450 / F-550 Super Duty 2010 Ford F-250 / F-350 / F-450 / F-550 Super Duty Technical Specifications Specification Detail OEM Part Number AL3Z-13D730-AA Switch Support 4-Switch Upfitter Panel Installation Type Plug-and-Play (No Splicing Required) Application In-Dash Wiring Harness Jumper Frequently Asked Questions Q: Does this kit include the switches themselves?A: No. This is the wiring harness jumper kit only — it connects the factory-installed blunt-cut wires under the dash to the upfitter switches. The switches themselves are sold separately or may already be present in your vehicle. Q: Is this plug-and-play?A: Yes. This jumper harness connects directly to the factory blunt-cut pass-through wires under the dash. No cutting, splicing, or soldering required — simply plug it in and route your accessories. Q: Does this replace AL3Z-13D730-AA?A: Yes. This kit is a direct replacement for Ford OEM part number AL3Z-13D730-AA, the factory upfitter switch wiring harness. Q: Will this work on my 2009-2010 Super Duty?A: Yes. This harness is designed for 2009 and 2010 Ford F-250, F-350, F-450, and F-550 Super Duty trucks with factory upfitter switch provisions. Q: How many switches does this support?A: This harness supports the standard 4-switch upfitter panel found in 2009-2010 Super Duty trucks. Each circuit is rated for the factory-specified amperage. Why Choose iFJF? iFJF delivers practical, high-quality solutions for Super Duty owners. Our wiring harness kit saves you time and frustration compared to manually wiring upfitter switches, with OEM-grade connectors and proper wire specifications for reliable, long-lasting performance. You May Also Need 6.4L Powerstroke Exhaust Up-Pipe for 2008-2010 Ford Super Duty

Read more less

Product Overview Stop the notorious 6.7L Cummins coolant bypass hose leak permanently with this Billet Aluminum Coolant Bypass Hose Barb Adapter from iFJF. The OEM plastic barb fitting on 2009-2019 Ram 2500/3500 Cummins engines is a well-known weak point — repeated heat cycling causes the plastic to become brittle, crack, and eventually leak coolant. This can leave you stranded with an overheating engine. Our CNC-machined billet 6061-T6 aluminum adapter is a direct bolt-on replacement that eliminates this failure point for good. This direct-fit billet aluminum adapter is the permanent solution to one of the most common coolant leak points on the 6.7L Cummins platform. Why the OEM Plastic Barb Fails The factory coolant bypass hose barb is made of glass-reinforced nylon plastic. While adequate when new, years of exposure to coolant at 190-210°F operating temperatures — combined with the constant vibration of the Cummins diesel engine — causes the plastic to degrade. The result is a sudden coolant leak that can rapidly drain your cooling system, leading to engine overheating and potential head gasket damage. This is one of the most common failure points on 2009-2019 Ram Cummins trucks. Key Features Billet 6061-T6 Aluminum Construction — CNC-machined from solid aerospace-grade aluminum for permanent durability Direct OEM Replacement — Same dimensions and fittings as the factory part; no modifications required Eliminates Plastic Barb Failure — No more cracked, brittle, or leaking OEM plastic fittings Corrosion-Resistant Finish — Engineered to withstand coolant exposure and engine bay conditions Precision CNC Machining — Tight tolerances ensure a perfect, leak-free seal with OEM hoses Lifetime Durability — Aluminum barb will outlast multiple OEM plastic replacements Compatibility Year Make Model Engine 2009-2018 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2019 Ram 2500 / 3500 6.7L Cummins Turbo Diesel Technical Specifications Specification Detail Material CNC-Machined Billet 6061-T6 Aluminum Finish Corrosion-Resistant Fitment 2009-2019 Ram 6.7L Cummins Installation Time 30-60 Minutes Installation Difficulty Intermediate (Basic Hand Tools) Frequently Asked Questions Q: Does this fix the common coolant leak on my 6.7L Cummins?A: Yes. The OEM coolant bypass hose uses a plastic barb fitting that becomes brittle over time and eventually cracks, causing a coolant leak. Our billet aluminum adapter permanently replaces this failure-prone plastic part. Q: Is installation difficult?A: Installation is straightforward for anyone with basic mechanical skills. It typically takes 30-60 minutes with common hand tools. You'll need to drain some coolant before removing the old fitting — always work on a cool engine. Q: Will this fit my 2009-2019 Ram 6.7L Cummins?A: Yes. This adapter fits all 2009 through 2019 Ram 2500 and 3500 trucks equipped with the 6.7L Cummins turbo diesel engine. Q: What material is the adapter made from?A: CNC-machined from billet 6061-T6 aluminum with a corrosion-resistant finish. Unlike the OEM plastic barb that degrades from heat cycling, our aluminum adapter will last the lifetime of your engine. Q: Do I need any special tools?A: Basic hand tools are all you need — socket set, pliers, flathead screwdriver, and a coolant catch pan. Some models may benefit from hose clamp pliers for tight spaces. Q: What's the difference between the adapter only and the complete kit?A: The adapter-only option includes just the billet aluminum barb fitting. The kit includes the adapter plus new hose clamps, O-rings, and replacement hose sections for a complete, leak-free installation. Why Choose iFJF? iFJF specializes in solving the common failure points on diesel trucks. Our coolant bypass adapter is engineered by diesel owners, for diesel owners — we understand what fails and how to fix it permanently. Every product is backed by our commitment to quality and responsive US-based customer support. You May Also Need Coolant Bypass Kit for 2003-2007 Ram 5.9L Cummins Coolant Bypass Hose Barb Adapter Kit — Complete Kit with Hoses

Read more less

Product Overview Stop the notorious 6.7L Cummins coolant bypass hose leak permanently with this Billet Aluminum Coolant Bypass Hose Barb Adapter from iFJF. The OEM plastic barb fitting on 2009-2019 Ram 2500/3500 Cummins engines is a well-known weak point — repeated heat cycling causes the plastic to become brittle, crack, and eventually leak coolant. This can leave you stranded with an overheating engine. Our CNC-machined billet 6061-T6 aluminum adapter is a direct bolt-on replacement that eliminates this failure point for good. This is the adapter-only option — ideal if you already have replacement hoses and clamps on hand. The billet aluminum barb fitting is the critical upgrade; everything else can be sourced locally. Why the OEM Plastic Barb Fails The factory coolant bypass hose barb is made of glass-reinforced nylon plastic. While adequate when new, years of exposure to coolant at 190-210°F operating temperatures — combined with the constant vibration of the Cummins diesel engine — causes the plastic to degrade. The result is a sudden coolant leak that can rapidly drain your cooling system, leading to engine overheating and potential head gasket damage. This is one of the most common failure points on 2009-2019 Ram Cummins trucks. Key Features Billet 6061-T6 Aluminum Construction — CNC-machined from solid aerospace-grade aluminum for permanent durability Direct OEM Replacement — Same dimensions and fittings as the factory part; no modifications required Eliminates Plastic Barb Failure — No more cracked, brittle, or leaking OEM plastic fittings Corrosion-Resistant Finish — Engineered to withstand coolant exposure and engine bay conditions Precision CNC Machining — Tight tolerances ensure a perfect, leak-free seal with OEM hoses Lifetime Durability — Aluminum barb will outlast multiple OEM plastic replacements Compatibility Year Make Model Engine 2009-2018 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2019 Ram 2500 / 3500 6.7L Cummins Turbo Diesel Technical Specifications Specification Detail Material CNC-Machined Billet 6061-T6 Aluminum Finish Corrosion-Resistant Fitment 2009-2019 Ram 6.7L Cummins Installation Time 30-60 Minutes Installation Difficulty Intermediate (Basic Hand Tools) Frequently Asked Questions Q: Does this fix the common coolant leak on my 6.7L Cummins?A: Yes. The OEM coolant bypass hose uses a plastic barb fitting that becomes brittle over time and eventually cracks, causing a coolant leak. Our billet aluminum adapter permanently replaces this failure-prone plastic part. Q: Is installation difficult?A: Installation is straightforward for anyone with basic mechanical skills. It typically takes 30-60 minutes with common hand tools. You'll need to drain some coolant before removing the old fitting — always work on a cool engine. Q: Will this fit my 2009-2019 Ram 6.7L Cummins?A: Yes. This adapter fits all 2009 through 2019 Ram 2500 and 3500 trucks equipped with the 6.7L Cummins turbo diesel engine. Q: What material is the adapter made from?A: CNC-machined from billet 6061-T6 aluminum with a corrosion-resistant finish. Unlike the OEM plastic barb that degrades from heat cycling, our aluminum adapter will last the lifetime of your engine. Q: Do I need any special tools?A: Basic hand tools are all you need — socket set, pliers, flathead screwdriver, and a coolant catch pan. Some models may benefit from hose clamp pliers for tight spaces. Q: What's the difference between the adapter only and the complete kit?A: The adapter-only option includes just the billet aluminum barb fitting. The kit includes the adapter plus new hose clamps, O-rings, and replacement hose sections for a complete, leak-free installation. Why Choose iFJF? iFJF specializes in solving the common failure points on diesel trucks. Our coolant bypass adapter is engineered by diesel owners, for diesel owners — we understand what fails and how to fix it permanently. Every product is backed by our commitment to quality and responsive US-based customer support. You May Also Need Coolant Bypass Kit for 2003-2007 Ram 5.9L Cummins Coolant Bypass Hose Barb Adapter Kit — Complete Kit with Hoses

Read more less

Product Overview Stop the notorious 6.7L Cummins coolant bypass hose leak permanently with this Billet Aluminum Coolant Bypass Hose Barb Adapter from iFJF. The OEM plastic barb fitting on 2009-2019 Ram 2500/3500 Cummins engines is a well-known weak point — repeated heat cycling causes the plastic to become brittle, crack, and eventually leak coolant. This can leave you stranded with an overheating engine. Our CNC-machined billet 6061-T6 aluminum adapter is a direct bolt-on replacement that eliminates this failure point for good. This complete kit includes the billet aluminum barb adapter, new hose clamps, O-rings, and replacement hose sections for a comprehensive, leak-free installation. Why the OEM Plastic Barb Fails The factory coolant bypass hose barb is made of glass-reinforced nylon plastic. While adequate when new, years of exposure to coolant at 190-210°F operating temperatures — combined with the constant vibration of the Cummins diesel engine — causes the plastic to degrade. The result is a sudden coolant leak that can rapidly drain your cooling system, leading to engine overheating and potential head gasket damage. This is one of the most common failure points on 2009-2019 Ram Cummins trucks. Key Features Billet 6061-T6 Aluminum Construction — CNC-machined from solid aerospace-grade aluminum for permanent durability Direct OEM Replacement — Same dimensions and fittings as the factory part; no modifications required Eliminates Plastic Barb Failure — No more cracked, brittle, or leaking OEM plastic fittings Corrosion-Resistant Finish — Engineered to withstand coolant exposure and engine bay conditions Precision CNC Machining — Tight tolerances ensure a perfect, leak-free seal with OEM hoses Lifetime Durability — Aluminum barb will outlast multiple OEM plastic replacements Compatibility Year Make Model Engine 2009-2018 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2019 Ram 2500 / 3500 6.7L Cummins Turbo Diesel Technical Specifications Specification Detail Material CNC-Machined Billet 6061-T6 Aluminum Finish Corrosion-Resistant Fitment 2009-2019 Ram 6.7L Cummins Installation Time 30-60 Minutes Installation Difficulty Intermediate (Basic Hand Tools) Frequently Asked Questions Q: Does this fix the common coolant leak on my 6.7L Cummins?A: Yes. The OEM coolant bypass hose uses a plastic barb fitting that becomes brittle over time and eventually cracks, causing a coolant leak. Our billet aluminum adapter permanently replaces this failure-prone plastic part. Q: Is installation difficult?A: Installation is straightforward for anyone with basic mechanical skills. It typically takes 30-60 minutes with common hand tools. You'll need to drain some coolant before removing the old fitting — always work on a cool engine. Q: Will this fit my 2009-2019 Ram 6.7L Cummins?A: Yes. This adapter fits all 2009 through 2019 Ram 2500 and 3500 trucks equipped with the 6.7L Cummins turbo diesel engine. Q: What material is the adapter made from?A: CNC-machined from billet 6061-T6 aluminum with a corrosion-resistant finish. Unlike the OEM plastic barb that degrades from heat cycling, our aluminum adapter will last the lifetime of your engine. Q: Do I need any special tools?A: Basic hand tools are all you need — socket set, pliers, flathead screwdriver, and a coolant catch pan. Some models may benefit from hose clamp pliers for tight spaces. Q: What's the difference between the adapter only and the complete kit?A: The adapter-only option includes just the billet aluminum barb fitting. The kit includes the adapter plus new hose clamps, O-rings, and replacement hose sections for a complete, leak-free installation. Why Choose iFJF? iFJF specializes in solving the common failure points on diesel trucks. Our coolant bypass adapter is engineered by diesel owners, for diesel owners — we understand what fails and how to fix it permanently. Every product is backed by our commitment to quality and responsive US-based customer support. You May Also Need Coolant Bypass Kit for 2003-2007 Ram 5.9L Cummins Coolant Bypass Hose Barb Adapter Kit — Complete Kit with Hoses

Read more less

Product Overview Stop the notorious 6.7L Cummins coolant bypass hose leak permanently with this Billet Aluminum Coolant Bypass Hose Barb Adapter from iFJF. The OEM plastic barb fitting on 2009-2019 Ram 2500/3500 Cummins engines is a well-known weak point — repeated heat cycling causes the plastic to become brittle, crack, and eventually leak coolant. This can leave you stranded with an overheating engine. Our CNC-machined billet 6061-T6 aluminum adapter is a direct bolt-on replacement that eliminates this failure point for good. This complete repair kit includes the billet aluminum adapter plus new hose clamps, replacement O-rings, and hose sections — everything needed for a permanent, leak-free repair in one package. Why the OEM Plastic Barb Fails The factory coolant bypass hose barb is made of glass-reinforced nylon plastic. While adequate when new, years of exposure to coolant at 190-210°F operating temperatures — combined with the constant vibration of the Cummins diesel engine — causes the plastic to degrade. The result is a sudden coolant leak that can rapidly drain your cooling system, leading to engine overheating and potential head gasket damage. This is one of the most common failure points on 2009-2019 Ram Cummins trucks. Key Features Billet 6061-T6 Aluminum Construction — CNC-machined from solid aerospace-grade aluminum for permanent durability Direct OEM Replacement — Same dimensions and fittings as the factory part; no modifications required Eliminates Plastic Barb Failure — No more cracked, brittle, or leaking OEM plastic fittings Corrosion-Resistant Finish — Engineered to withstand coolant exposure and engine bay conditions Precision CNC Machining — Tight tolerances ensure a perfect, leak-free seal with OEM hoses Lifetime Durability — Aluminum barb will outlast multiple OEM plastic replacements Compatibility Year Make Model Engine 2009-2018 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2019 Ram 2500 / 3500 6.7L Cummins Turbo Diesel Technical Specifications Specification Detail Material CNC-Machined Billet 6061-T6 Aluminum Finish Corrosion-Resistant Fitment 2009-2019 Ram 6.7L Cummins Installation Time 30-60 Minutes Installation Difficulty Intermediate (Basic Hand Tools) Frequently Asked Questions Q: Does this fix the common coolant leak on my 6.7L Cummins?A: Yes. The OEM coolant bypass hose uses a plastic barb fitting that becomes brittle over time and eventually cracks, causing a coolant leak. Our billet aluminum adapter permanently replaces this failure-prone plastic part. Q: Is installation difficult?A: Installation is straightforward for anyone with basic mechanical skills. It typically takes 30-60 minutes with common hand tools. You'll need to drain some coolant before removing the old fitting — always work on a cool engine. Q: Will this fit my 2009-2019 Ram 6.7L Cummins?A: Yes. This adapter fits all 2009 through 2019 Ram 2500 and 3500 trucks equipped with the 6.7L Cummins turbo diesel engine. Q: What material is the adapter made from?A: CNC-machined from billet 6061-T6 aluminum with a corrosion-resistant finish. Unlike the OEM plastic barb that degrades from heat cycling, our aluminum adapter will last the lifetime of your engine. Q: Do I need any special tools?A: Basic hand tools are all you need — socket set, pliers, flathead screwdriver, and a coolant catch pan. Some models may benefit from hose clamp pliers for tight spaces. Q: What's the difference between the adapter only and the complete kit?A: The adapter-only option includes just the billet aluminum barb fitting. The kit includes the adapter plus new hose clamps, O-rings, and replacement hose sections for a complete, leak-free installation. Why Choose iFJF? iFJF specializes in solving the common failure points on diesel trucks. Our coolant bypass adapter is engineered by diesel owners, for diesel owners — we understand what fails and how to fix it permanently. Every product is backed by our commitment to quality and responsive US-based customer support. You May Also Need Coolant Bypass Kit for 2003-2007 Ram 5.9L Cummins Coolant Bypass Hose Barb Adapter Kit — Complete Kit with Hoses

Read more less

Product Overview Maximize the reliability and performance of your 2010+ Cummins ISX15 with this Stage 2 EGR Delete Kit from iFJF. Designed for CM2250 and CM2350 ECM-equipped engines, this comprehensive kit includes all the block-off plates and plugs needed to fully eliminate the problematic EGR system. The ISX15's EGR system is a leading cause of turbocharger fouling, intake manifold carbon buildup, and reduced fuel economy in heavy-duty applications. For off-road, agricultural, and competition use, deleting the EGR system restores engine efficiency and eliminates costly EGR-related failures. Key Features Stage 2 Complete Delete — Full block-off plate and plug set for comprehensive EGR system removal CM2250 & CM2350 Compatible — Engineered for 2010+ ISX15 engines with both ECM generations CNC-Machined Billet 6061-T6 Aluminum — Precision manufacturing ensures perfect fit and seal Corrosion-Resistant Anodized Finish — Built to withstand harsh engine bay environments Eliminates Turbo Fouling — No more exhaust soot clogging your turbocharger VGT mechanism Improved Fuel Economy — Cleaner combustion without recirculated exhaust gas Includes All Hardware — Gaskets, bolts, and plugs for complete installation Compatibility Year Range Make Engine ECM 2010-2017 Cummins ISX15 CM2250 2017+ Cummins ISX15 CM2350 Technical Specifications Specification Detail Material Billet 6061-T6 Aluminum Finish Anodized Corrosion-Resistant Kit Type Stage 2 (Complete) Application Off-Road / Agricultural / Competition Tuning Required Yes — ECM Reprogramming Required ⚠️ Important Legal Notice OFF-ROAD / COMPETITION / AGRICULTURAL USE ONLY. This EGR delete kit is not EPA compliant and is not legal for on-highway commercial vehicles in the United States. It is the purchaser's responsibility to verify and comply with all applicable regulations. Frequently Asked Questions Q: What's included in this ISX EGR delete kit?A: This Stage 2 kit includes EGR block-off plates and plugs for complete EGR system removal on 2010+ Cummins ISX15 CM2250/CM2350 engines. Q: Will I need ECM tuning after installation?A: Yes. The ECM will detect the removed EGR components and set fault codes. Custom ECM tuning is required to disable EGR-related DTCs and derate protocols. Q: Is this legal for on-highway trucks?A: OFF-ROAD / COMPETITION / AGRICULTURAL USE ONLY. This kit is not EPA compliant and is not legal for on-highway commercial vehicles. Q: What's the difference between Stage 1 and Stage 2?A: Stage 2 includes additional block-off plates and plugs for more complete EGR system removal compared to Stage 1. This provides a cleaner installation and eliminates more potential leak points. Q: What material are the plates made from?A: All block-off plates are CNC-machined from billet 6061-T6 aluminum with a corrosion-resistant anodized finish for maximum durability in heavy-duty applications. Why Choose iFJF? iFJF provides premium diesel aftermarket solutions engineered for demanding heavy-duty applications. Our ISX15 components are manufactured to the highest standards of precision and durability, backed by knowledgeable support for fleets and owner-operators alike. You May Also Need Stage 2 EGR Delete Kit for 2002-2007 ISX CM870 Stage 2 EGR Plug Kit for 2007-2010 ISX CM871

Read more less

Product Overview Eliminate the restrictive and failure-prone EGR system on your 2010-2014 Ram 2500/3500 6.7L Cummins with this EGR Throttle Valve & Cooler Delete Kit from iFJF. The factory EGR system recirculates hot, soot-laden exhaust gas back into your engine's intake — causing carbon buildup, oil contamination, reduced performance, and elevated EGTs. This complete hardware kit replaces the EGR components with precision-machined billet aluminum delete plates and pipes, restoring clean airflow and reliability to your Cummins engine. Why Delete the EGR on Your 6.7L Cummins? The 6.7L Cummins is one of the most durable diesel platforms ever built — but the emissions systems hold it back. The EGR cooler is a known failure point that can leak coolant into the intake, and the EGR valve introduces abrasive soot particles into the combustion chamber. For off-road and competition applications, removing these components dramatically improves engine health and performance. Key Features Complete EGR System Delete — Throttle valve delete plate + EGR cooler delete components in one kit CNC-Machined Billet 6061-T6 Aluminum — Precision-engineered for perfect fit and long-term durability Eliminates Carbon Buildup — No more exhaust soot fouling your intake manifold, valves, and engine oil Reduced EGTs — Cooler exhaust gas temperatures for safer, more reliable operation under load Improved Turbo Response — Clean, unrestricted intake airflow for faster turbo spool Prevents EGR Cooler Failure — Eliminate the risk of internal coolant leaks causing hydrolock or head gasket damage Includes All Hardware — Gaskets, O-rings, bolts, and mounting hardware included Compatibility Year Make Model Engine 2010 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2011 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2012 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2013 Ram 2500 / 3500 6.7L Cummins Turbo Diesel 2014 Ram 2500 / 3500 6.7L Cummins Turbo Diesel Technical Specifications Specification Detail Material CNC-Machined Billet 6061-T6 Aluminum Finish Corrosion-Resistant Coating Application Off-Road / Competition Use Only Installation Professional Installation Recommended Tuning Required Yes — Custom ECU Tune Required to Disable EGR DTCs ⚠️ Important Legal Notice OFF-ROAD / COMPETITION USE ONLY. This EGR delete kit is intended exclusively for off-road and closed-course competition vehicles. It is NOT street-legal and does NOT comply with EPA or CARB emissions regulations. The purchaser assumes all responsibility for compliance with applicable laws. Frequently Asked Questions Q: What does this EGR delete kit include?A: This kit includes the EGR throttle valve delete plate, EGR cooler delete components, all necessary gaskets, O-rings, bolts, and mounting hardware for a complete installation. Q: Will this trigger a check engine light?A: Yes. The ECU will detect the missing EGR components and set diagnostic trouble codes. Custom ECU tuning is required to disable EGR-related DTCs and prevent limp mode. This kit is hardware only. Q: Is this legal for street use?A: OFF-ROAD / COMPETITION USE ONLY. EGR delete modifications are not EPA or CARB compliant and are not legal for on-road vehicles. Q: What are the benefits of EGR delete on a 6.7L Cummins?A: On off-road/competition vehicles, deleting the EGR system eliminates carbon buildup in the intake manifold, reduces soot contamination in engine oil, lowers EGTs, improves turbo response, and removes the risk of EGR cooler failure. Q: Do I need to remove the DPF as well?A: The EGR and DPF systems work together. For optimal results on competition vehicles, removing both systems with proper ECU tuning is recommended. However, this kit addresses the EGR system specifically. Q: What material is used?A: All delete components are CNC-machined from billet 6061-T6 aluminum with a corrosion-resistant finish, engineered to withstand the high-temperature environment of the 6.7L Cummins engine bay. Q: Does this fit my 2010-2014 Ram 2500/3500?A: Yes. This kit is designed for all 2010, 2011, 2012, 2013, and 2014 Ram 2500 and 3500 trucks equipped with the 6.7L Cummins turbo diesel engine. Why Choose iFJF? iFJF is your trusted source for diesel performance aftermarket parts. All our products are precision-engineered using premium materials and backed by responsive US-based customer support. From Cummins to Powerstroke to Duramax, we deliver the parts that keep your diesel running at its best. You May Also Need EGR Throttle Valve & Cooler Delete Kit — 2010-2014 Ram 6.7L EGR Valve Delete Kit for 2007-2018 Ram 6.7L Cummins 3.5" High Flow Intake Manifold Elbow for 2007-2018 Ram 6.7L

Read more less

Product Overview Eliminate the restrictive and failure-prone EGR system on your 2010-2014 Ram 2500/3500 6.7L Cummins with this EGR Throttle Valve & Cooler Delete Kit from iFJF. The factory EGR system recirculates hot, soot-laden exhaust gas back into your engine's intake — causing carbon buildup, oil contamination, reduced performance, and elevated EGTs. This complete hardware kit replaces the EGR components with precision-machined billet aluminum delete plates and pipes, restoring clean airflow and reliability to your Cummins engine. Why Delete the EGR on Your 6.7L Cummins? The 6.7L Cummins is one of the most durable diesel platforms ever built — but the emissions systems hold it back. The EGR cooler is a known failure point that can leak coolant into the intake, and the EGR valve introduces abrasive soot particles into the combustion chamber. For off-road and competition applications, removing these components dramatically improves engine health and performance. Key Features Complete EGR System Delete — Throttle valve delete plate + EGR cooler delete components in one kit CNC-Machined Billet 6061-T6 Aluminum — Precision-engineered for perfect fit and long-term durability Eliminates Carbon Buildup — No more exhaust soot fouling your intake manifold, valves, and engine oil Reduced EGTs — Cooler exhaust gas temperatures for safer, more reliable operation under load Improved Turbo Response — Clean, unrestricted intake airflow for faster turbo spool Prevents EGR Cooler Failure — Eliminate the risk of internal coolant leaks causing hydrolock or head gasket damage Includes All Hardware — Gaskets, O-rings, bolts, and mounting hardware included Compatibility Year Make Model Engine 2010 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2011 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2012 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2013 Ram 2500 / 3500 6.7L Cummins Turbo Diesel 2014 Ram 2500 / 3500 6.7L Cummins Turbo Diesel Technical Specifications Specification Detail Material CNC-Machined Billet 6061-T6 Aluminum Finish Corrosion-Resistant Coating Application Off-Road / Competition Use Only Installation Professional Installation Recommended Tuning Required Yes — Custom ECU Tune Required to Disable EGR DTCs ⚠️ Important Legal Notice OFF-ROAD / COMPETITION USE ONLY. This EGR delete kit is intended exclusively for off-road and closed-course competition vehicles. It is NOT street-legal and does NOT comply with EPA or CARB emissions regulations. The purchaser assumes all responsibility for compliance with applicable laws. Frequently Asked Questions Q: What does this EGR delete kit include?A: This kit includes the EGR throttle valve delete plate, EGR cooler delete components, all necessary gaskets, O-rings, bolts, and mounting hardware for a complete installation. Q: Will this trigger a check engine light?A: Yes. The ECU will detect the missing EGR components and set diagnostic trouble codes. Custom ECU tuning is required to disable EGR-related DTCs and prevent limp mode. This kit is hardware only. Q: Is this legal for street use?A: OFF-ROAD / COMPETITION USE ONLY. EGR delete modifications are not EPA or CARB compliant and are not legal for on-road vehicles. Q: What are the benefits of EGR delete on a 6.7L Cummins?A: On off-road/competition vehicles, deleting the EGR system eliminates carbon buildup in the intake manifold, reduces soot contamination in engine oil, lowers EGTs, improves turbo response, and removes the risk of EGR cooler failure. Q: Do I need to remove the DPF as well?A: The EGR and DPF systems work together. For optimal results on competition vehicles, removing both systems with proper ECU tuning is recommended. However, this kit addresses the EGR system specifically. Q: What material is used?A: All delete components are CNC-machined from billet 6061-T6 aluminum with a corrosion-resistant finish, engineered to withstand the high-temperature environment of the 6.7L Cummins engine bay. Q: Does this fit my 2010-2014 Ram 2500/3500?A: Yes. This kit is designed for all 2010, 2011, 2012, 2013, and 2014 Ram 2500 and 3500 trucks equipped with the 6.7L Cummins turbo diesel engine. Why Choose iFJF? iFJF is your trusted source for diesel performance aftermarket parts. All our products are precision-engineered using premium materials and backed by responsive US-based customer support. From Cummins to Powerstroke to Duramax, we deliver the parts that keep your diesel running at its best. You May Also Need EGR Throttle Valve & Cooler Delete Kit — 2010-2014 Ram 6.7L EGR Valve Delete Kit for 2007-2018 Ram 6.7L Cummins 3.5" High Flow Intake Manifold Elbow for 2007-2018 Ram 6.7L

Read more less

Product Overview Eliminate the restrictive and failure-prone EGR system on your 2010-2014 Ram 2500/3500 6.7L Cummins with this EGR Throttle Valve & Cooler Delete Kit from iFJF. The factory EGR system recirculates hot, soot-laden exhaust gas back into your engine's intake — causing carbon buildup, oil contamination, reduced performance, and elevated EGTs. This complete hardware kit replaces the EGR components with precision-machined billet aluminum delete plates and pipes, restoring clean airflow and reliability to your Cummins engine. Why Delete the EGR on Your 6.7L Cummins? The 6.7L Cummins is one of the most durable diesel platforms ever built — but the emissions systems hold it back. The EGR cooler is a known failure point that can leak coolant into the intake, and the EGR valve introduces abrasive soot particles into the combustion chamber. For off-road and competition applications, removing these components dramatically improves engine health and performance. Key Features Complete EGR System Delete — Throttle valve delete plate + EGR cooler delete components in one kit CNC-Machined Billet 6061-T6 Aluminum — Precision-engineered for perfect fit and long-term durability Eliminates Carbon Buildup — No more exhaust soot fouling your intake manifold, valves, and engine oil Reduced EGTs — Cooler exhaust gas temperatures for safer, more reliable operation under load Improved Turbo Response — Clean, unrestricted intake airflow for faster turbo spool Prevents EGR Cooler Failure — Eliminate the risk of internal coolant leaks causing hydrolock or head gasket damage Includes All Hardware — Gaskets, O-rings, bolts, and mounting hardware included Compatibility Year Make Model Engine 2010 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2011 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2012 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2013 Ram 2500 / 3500 6.7L Cummins Turbo Diesel 2014 Ram 2500 / 3500 6.7L Cummins Turbo Diesel Technical Specifications Specification Detail Material CNC-Machined Billet 6061-T6 Aluminum Finish Corrosion-Resistant Coating Application Off-Road / Competition Use Only Installation Professional Installation Recommended Tuning Required Yes — Custom ECU Tune Required to Disable EGR DTCs ⚠️ Important Legal Notice OFF-ROAD / COMPETITION USE ONLY. This EGR delete kit is intended exclusively for off-road and closed-course competition vehicles. It is NOT street-legal and does NOT comply with EPA or CARB emissions regulations. The purchaser assumes all responsibility for compliance with applicable laws. Frequently Asked Questions Q: What does this EGR delete kit include?A: This kit includes the EGR throttle valve delete plate, EGR cooler delete components, all necessary gaskets, O-rings, bolts, and mounting hardware for a complete installation. Q: Will this trigger a check engine light?A: Yes. The ECU will detect the missing EGR components and set diagnostic trouble codes. Custom ECU tuning is required to disable EGR-related DTCs and prevent limp mode. This kit is hardware only. Q: Is this legal for street use?A: OFF-ROAD / COMPETITION USE ONLY. EGR delete modifications are not EPA or CARB compliant and are not legal for on-road vehicles. Q: What are the benefits of EGR delete on a 6.7L Cummins?A: On off-road/competition vehicles, deleting the EGR system eliminates carbon buildup in the intake manifold, reduces soot contamination in engine oil, lowers EGTs, improves turbo response, and removes the risk of EGR cooler failure. Q: Do I need to remove the DPF as well?A: The EGR and DPF systems work together. For optimal results on competition vehicles, removing both systems with proper ECU tuning is recommended. However, this kit addresses the EGR system specifically. Q: What material is used?A: All delete components are CNC-machined from billet 6061-T6 aluminum with a corrosion-resistant finish, engineered to withstand the high-temperature environment of the 6.7L Cummins engine bay. Q: Does this fit my 2010-2014 Ram 2500/3500?A: Yes. This kit is designed for all 2010, 2011, 2012, 2013, and 2014 Ram 2500 and 3500 trucks equipped with the 6.7L Cummins turbo diesel engine. Why Choose iFJF? iFJF is your trusted source for diesel performance aftermarket parts. All our products are precision-engineered using premium materials and backed by responsive US-based customer support. From Cummins to Powerstroke to Duramax, we deliver the parts that keep your diesel running at its best. You May Also Need EGR Throttle Valve & Cooler Delete Kit — 2010-2014 Ram 6.7L EGR Valve Delete Kit for 2007-2018 Ram 6.7L Cummins 3.5" High Flow Intake Manifold Elbow for 2007-2018 Ram 6.7L ⚠️ Off-Road / Competition Use Only: This product is intended for off-road or competition vehicles only. Not legal for highway use on emissions-controlled vehicles in the US and many other jurisdictions. Check local and federal regulations before purchasing. Removal of emissions equipment may void your vehicle warranty. 🔗 Cummins Diesel Resources & Maintenance 📖 Related Guides: Ram 6.7L Cummins Fuel Filter Replacement: Complete DIY Guide (2013–2018) Diesel Fuel Filter Maintenance — When to Replace (Duramax, Powerstroke & Cummins) 🔍 Shop All Cummins Parts → | EGR Delete Parts → | Fuel Filters →

Read more less

Product Overview Transform your 2010-2014 Ram 6.7L Cummins with this 3.5" High-Flow Intake Manifold Elbow Horn & EGR Delete Combo Kit from iFJF. This all-in-one package addresses two critical weaknesses of the factory 6.7L setup: the restrictive, crack-prone plastic intake elbow and the problematic EGR throttle/cooler system. The upgrade to a mandrel-bent 3.5" aluminum intake elbow delivers improved airflow, lower EGTs, and better turbo response, while the EGR delete components eliminate carbon buildup and the risk of EGR cooler failure. Key Features 3.5" Mandrel-Bent Aluminum Intake Elbow — Replaces restrictive OEM plastic elbow; significantly improves airflow and eliminates plastic failure risk EGR Throttle Cooler Valve Delete — Complete EGR system removal in one integrated kit CNC-Machined Billet 6061-T6 Aluminum — Precision-engineered for perfect OEM fitment Eliminates Plastic Intake Failure — No more cracked or warped OEM intake elbows under boost pressure Improved Turbo Spool — Reduced intake restriction for faster, more responsive boost delivery Lower EGTs — Cooler, denser intake charge for safer engine operation under heavy load and towing All Hardware Included — Gaskets, O-rings, clamps, bolts, and mounting hardware for complete installation Compatibility Year Make Model Engine 2010 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2011 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2012 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2013 Ram 2500 / 3500 6.7L Cummins Turbo Diesel 2014 Ram 2500 / 3500 6.7L Cummins Turbo Diesel Technical Specifications Specification Detail Intake Elbow Size 3.5 inch (Mandrel-Bent) Intake Material 6061-T6 Aluminum Delete Plate Material CNC Billet 6061-T6 Aluminum Application Off-Road / Competition Use Only Installation Professional Installation Recommended ⚠️ Important Legal Notice OFF-ROAD / COMPETITION USE ONLY. The EGR delete components in this kit are not EPA or CARB compliant. This kit is intended exclusively for off-road and closed-course competition vehicles. The purchaser assumes all responsibility for compliance with applicable laws. Frequently Asked Questions Q: What does this combo kit include?A: This kit combines the 3.5" high-flow intake manifold elbow horn with the EGR throttle cooler valve delete components — everything you need to upgrade your intake and delete the EGR system in one package. Q: What are the benefits of the 3.5" intake elbow?A: The factory intake elbow is restricted and made from plastic prone to cracking under boost. Our 3.5" mandrel-bent aluminum elbow provides significantly improved airflow, reduces intake restriction, and eliminates the failure-prone plastic OEM part. Q: Will I need tuning?A: Yes. EGR delete requires custom ECU tuning to disable related DTCs. The intake elbow itself does not require tuning, but the EGR delete portion of this kit does. Q: Is this legal for on-road use?A: OFF-ROAD / COMPETITION USE ONLY. The EGR delete portion is not EPA compliant. The intake elbow alone is emissions-compliant, but the complete kit is intended for off-road/competition applications. Q: Does this fit all 2010-2014 Ram 6.7L Cummins models?A: Yes. This kit is designed for 2010-2014 Ram 2500 and 3500 trucks with the 6.7L Cummins turbo diesel engine. Why Choose iFJF? iFJF delivers premium diesel performance solutions engineered for real-world results. Our intake and EGR delete components are precision-machined from aerospace-grade aluminum, backed by expert support from a team that lives and breathes diesel performance. You May Also Need 3.5" High Flow Intake Elbow for 2007-2018 Ram 6.7L Cummins EGR Valve Delete Kit for 2007-2018 Ram 6.7L Cummins

Read more less

Product Overview Eliminate the restrictive and failure-prone EGR system on your 2010-2014 Ram 2500/3500 6.7L Cummins with this EGR Throttle Valve & Cooler Delete Kit from iFJF. The factory EGR system recirculates hot, soot-laden exhaust gas back into your engine's intake — causing carbon buildup, oil contamination, reduced performance, and elevated EGTs. This complete hardware kit replaces the EGR components with precision-machined billet aluminum delete plates and pipes, restoring clean airflow and reliability to your Cummins engine. Why Delete the EGR on Your 6.7L Cummins? The 6.7L Cummins is one of the most durable diesel platforms ever built — but the emissions systems hold it back. The EGR cooler is a known failure point that can leak coolant into the intake, and the EGR valve introduces abrasive soot particles into the combustion chamber. For off-road and competition applications, removing these components dramatically improves engine health and performance. Key Features Complete EGR System Delete — Throttle valve delete plate + EGR cooler delete components in one kit CNC-Machined Billet 6061-T6 Aluminum — Precision-engineered for perfect fit and long-term durability Eliminates Carbon Buildup — No more exhaust soot fouling your intake manifold, valves, and engine oil Reduced EGTs — Cooler exhaust gas temperatures for safer, more reliable operation under load Improved Turbo Response — Clean, unrestricted intake airflow for faster turbo spool Prevents EGR Cooler Failure — Eliminate the risk of internal coolant leaks causing hydrolock or head gasket damage Includes All Hardware — Gaskets, O-rings, bolts, and mounting hardware included Compatibility Year Make Model Engine 2010 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2011 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2012 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2013 Ram 2500 / 3500 6.7L Cummins Turbo Diesel 2014 Ram 2500 / 3500 6.7L Cummins Turbo Diesel Technical Specifications Specification Detail Material CNC-Machined Billet 6061-T6 Aluminum Finish Corrosion-Resistant Coating Application Off-Road / Competition Use Only Installation Professional Installation Recommended Tuning Required Yes — Custom ECU Tune Required to Disable EGR DTCs ⚠️ Important Legal Notice OFF-ROAD / COMPETITION USE ONLY. This EGR delete kit is intended exclusively for off-road and closed-course competition vehicles. It is NOT street-legal and does NOT comply with EPA or CARB emissions regulations. The purchaser assumes all responsibility for compliance with applicable laws. Frequently Asked Questions Q: What does this EGR delete kit include?A: This kit includes the EGR throttle valve delete plate, EGR cooler delete components, all necessary gaskets, O-rings, bolts, and mounting hardware for a complete installation. Q: Will this trigger a check engine light?A: Yes. The ECU will detect the missing EGR components and set diagnostic trouble codes. Custom ECU tuning is required to disable EGR-related DTCs and prevent limp mode. This kit is hardware only. Q: Is this legal for street use?A: OFF-ROAD / COMPETITION USE ONLY. EGR delete modifications are not EPA or CARB compliant and are not legal for on-road vehicles. Q: What are the benefits of EGR delete on a 6.7L Cummins?A: On off-road/competition vehicles, deleting the EGR system eliminates carbon buildup in the intake manifold, reduces soot contamination in engine oil, lowers EGTs, improves turbo response, and removes the risk of EGR cooler failure. Q: Do I need to remove the DPF as well?A: The EGR and DPF systems work together. For optimal results on competition vehicles, removing both systems with proper ECU tuning is recommended. However, this kit addresses the EGR system specifically. Q: What material is used?A: All delete components are CNC-machined from billet 6061-T6 aluminum with a corrosion-resistant finish, engineered to withstand the high-temperature environment of the 6.7L Cummins engine bay. Q: Does this fit my 2010-2014 Ram 2500/3500?A: Yes. This kit is designed for all 2010, 2011, 2012, 2013, and 2014 Ram 2500 and 3500 trucks equipped with the 6.7L Cummins turbo diesel engine. Why Choose iFJF? iFJF is your trusted source for diesel performance aftermarket parts. All our products are precision-engineered using premium materials and backed by responsive US-based customer support. From Cummins to Powerstroke to Duramax, we deliver the parts that keep your diesel running at its best. You May Also Need EGR Throttle Valve & Cooler Delete Kit — 2010-2014 Ram 6.7L EGR Valve Delete Kit for 2007-2018 Ram 6.7L Cummins 3.5" High Flow Intake Manifold Elbow for 2007-2018 Ram 6.7L ⚠️ Off-Road / Competition Use Only: This product is intended for off-road or competition vehicles only. Not legal for highway use on emissions-controlled vehicles in the US and many other jurisdictions. Check local and federal regulations before purchasing. Removal of emissions equipment may void your vehicle warranty. 🔗 Cummins Diesel Resources & Maintenance 📖 Related Guides: Ram 6.7L Cummins Fuel Filter Replacement: Complete DIY Guide (2013–2018) Diesel Fuel Filter Maintenance — When to Replace (Duramax, Powerstroke & Cummins) 🔍 Shop All Cummins Parts → | EGR Delete Parts → | Fuel Filters →

Read more less

Product Overview Eliminate the restrictive and failure-prone EGR system on your 2010-2014 Ram 2500/3500 6.7L Cummins with this EGR Throttle Valve & Cooler Delete Kit from iFJF. The factory EGR system recirculates hot, soot-laden exhaust gas back into your engine's intake — causing carbon buildup, oil contamination, reduced performance, and elevated EGTs. This complete hardware kit replaces the EGR components with precision-machined billet aluminum delete plates and pipes, restoring clean airflow and reliability to your Cummins engine. Why Delete the EGR on Your 6.7L Cummins? The 6.7L Cummins is one of the most durable diesel platforms ever built — but the emissions systems hold it back. The EGR cooler is a known failure point that can leak coolant into the intake, and the EGR valve introduces abrasive soot particles into the combustion chamber. For off-road and competition applications, removing these components dramatically improves engine health and performance. Key Features Complete EGR System Delete — Throttle valve delete plate + EGR cooler delete components in one kit CNC-Machined Billet 6061-T6 Aluminum — Precision-engineered for perfect fit and long-term durability Eliminates Carbon Buildup — No more exhaust soot fouling your intake manifold, valves, and engine oil Reduced EGTs — Cooler exhaust gas temperatures for safer, more reliable operation under load Improved Turbo Response — Clean, unrestricted intake airflow for faster turbo spool Prevents EGR Cooler Failure — Eliminate the risk of internal coolant leaks causing hydrolock or head gasket damage Includes All Hardware — Gaskets, O-rings, bolts, and mounting hardware included Compatibility Year Make Model Engine 2010 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2011 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2012 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2013 Ram 2500 / 3500 6.7L Cummins Turbo Diesel 2014 Ram 2500 / 3500 6.7L Cummins Turbo Diesel Technical Specifications Specification Detail Material CNC-Machined Billet 6061-T6 Aluminum Finish Corrosion-Resistant Coating Application Off-Road / Competition Use Only Installation Professional Installation Recommended Tuning Required Yes — Custom ECU Tune Required to Disable EGR DTCs ⚠️ Important Legal Notice OFF-ROAD / COMPETITION USE ONLY. This EGR delete kit is intended exclusively for off-road and closed-course competition vehicles. It is NOT street-legal and does NOT comply with EPA or CARB emissions regulations. The purchaser assumes all responsibility for compliance with applicable laws. Frequently Asked Questions Q: What does this EGR delete kit include?A: This kit includes the EGR throttle valve delete plate, EGR cooler delete components, all necessary gaskets, O-rings, bolts, and mounting hardware for a complete installation. Q: Will this trigger a check engine light?A: Yes. The ECU will detect the missing EGR components and set diagnostic trouble codes. Custom ECU tuning is required to disable EGR-related DTCs and prevent limp mode. This kit is hardware only. Q: Is this legal for street use?A: OFF-ROAD / COMPETITION USE ONLY. EGR delete modifications are not EPA or CARB compliant and are not legal for on-road vehicles. Q: What are the benefits of EGR delete on a 6.7L Cummins?A: On off-road/competition vehicles, deleting the EGR system eliminates carbon buildup in the intake manifold, reduces soot contamination in engine oil, lowers EGTs, improves turbo response, and removes the risk of EGR cooler failure. Q: Do I need to remove the DPF as well?A: The EGR and DPF systems work together. For optimal results on competition vehicles, removing both systems with proper ECU tuning is recommended. However, this kit addresses the EGR system specifically. Q: What material is used?A: All delete components are CNC-machined from billet 6061-T6 aluminum with a corrosion-resistant finish, engineered to withstand the high-temperature environment of the 6.7L Cummins engine bay. Q: Does this fit my 2010-2014 Ram 2500/3500?A: Yes. This kit is designed for all 2010, 2011, 2012, 2013, and 2014 Ram 2500 and 3500 trucks equipped with the 6.7L Cummins turbo diesel engine. Why Choose iFJF? iFJF is your trusted source for diesel performance aftermarket parts. All our products are precision-engineered using premium materials and backed by responsive US-based customer support. From Cummins to Powerstroke to Duramax, we deliver the parts that keep your diesel running at its best. You May Also Need EGR Throttle Valve & Cooler Delete Kit — 2010-2014 Ram 6.7L EGR Valve Delete Kit for 2007-2018 Ram 6.7L Cummins 3.5" High Flow Intake Manifold Elbow for 2007-2018 Ram 6.7L ⚠️ Off-Road / Competition Use Only: This product is intended for off-road or competition vehicles only. Not legal for highway use on emissions-controlled vehicles in the US and many other jurisdictions. Check local and federal regulations before purchasing. Removal of emissions equipment may void your vehicle warranty. 🔗 Cummins Diesel Resources & Maintenance 📖 Related Guides: Ram 6.7L Cummins Fuel Filter Replacement: Complete DIY Guide (2013–2018) Diesel Fuel Filter Maintenance — When to Replace (Duramax, Powerstroke & Cummins) 🔍 Shop All Cummins Parts → | EGR Delete Parts → | Fuel Filters →

Read more less

Product Overview Maintain the legendary ride quality of your Jaguar XJ with this Front Lower Control Arm Pair (C2D49933) from iFJF. The XJ's sophisticated double-wishbone front suspension demands precision components — worn control arms compromise the silky-smooth ride and confident handling that define the Jaguar experience. This complete pair (left + right) replaces OEM part C2D49933 with pre-installed ball joints and premium rubber bushings for a direct, no-hassle replacement. Key Features OEM C2D49933 Replacement — Direct fit for 2010-2017 Jaguar XJ / XJR front lower control arms Complete Pair (L+R) — Both left and right control arms included in one kit Pre-Installed Ball Joints & Bushings — Ready to install; no pressing or special tools required Forged Alloy Steel Construction — Matches OEM material specifications for strength and crash safety Premium Rubber Bushings — Engineered to replicate factory ride comfort and NVH isolation Corrosion-Resistant Coating — Protective finish for long-term durability in all climates Compatibility Year Make Model Chassis OEM Part # 2010-2017 Jaguar XJ / XJR X351 C2D49933 Technical Specifications Specification Detail Material Forged Alloy Steel Bushing Type Premium Rubber Ball Joint Pre-Installed Position Front Lower (L+R Pair) OEM Reference C2D49933 Frequently Asked Questions Q: Will this fit my 2010-2017 Jaguar XJ or XJR?A: Yes. This control arm pair is designed for 2010 through 2017 Jaguar XJ and XJR models (X351 chassis). It replaces OEM part number C2D49933. Q: What's included in this kit?A: This kit includes one pair (left + right) of front lower control arms with pre-installed ball joints and bushings — a complete drop-in replacement. Q: How does this compare to genuine Jaguar control arms?A: Our control arms are manufactured to meet or exceed OEM specifications for fit, material quality, and durability — at a fraction of the dealership price. Q: Do I need a wheel alignment after installation?A: Yes. A professional 4-wheel alignment is essential after replacing control arms on the Jaguar XJ platform to ensure proper handling and prevent premature tire wear. Q: What are the symptoms of worn control arms on an XJ?A: Common signs include front-end vibration at highway speeds, clunking over bumps, imprecise steering feel, and inner edge tire wear. Why Choose iFJF? iFJF provides luxury vehicle owners with premium-quality replacement parts at sensible prices. Our Jaguar control arms deliver OEM-grade fit and performance without the dealership markup. We stand behind every product with dedicated customer support. You May Also Need Jaguar XJ XJR Front Control Arms (Pair) Front Control Arms for 2007-2014 BMW X5 X6 E70

Read more less

Product Overview Restore your Audi's legendary handling and ride quality with the iFJF 10-Piece Front Suspension Control Arm Kit — precision-engineered for 2011–2012 Audi A4, A5, S4, S5, and Q5 Quattro models. This complete kit replaces all eight front control arms (upper + lower, left + right) plus both stabilizer end links in a single package, saving you hundreds compared to buying individual arms from the dealer. Each control arm is manufactured using advanced forging, casting, stamping, and robotic welding processes to ensure OEM-level fitment and durability. Pre-installed rubber bushings and ball joints mean no pressing required — bolt on and go. What's Included (10 Pieces) Position Part Number Thread Front Left Lower Rearward RK622786 M14 × 1.5 Front Right Lower Rearward RK622650 M14 × 1.5 Front Left Lower Front RK641152 — Front Right Lower Front RK641153 — Front Left Upper Rear + Ball Joint RK621000 — Front Right Upper Rear + Ball Joint RK620999 — Front Left Upper Front + Ball Joint RK621002 — Front Right Upper Front + Ball Joint RK621001 — Front Stabilizer Links (×2) K750359 — Note: 17mm ball joint thread = M14 × 1.5. A 16mm (M12 × 1.5) version is also available — please verify before ordering. Vehicle Compatibility Year Model Drivetrain 2011–2012 Audi A4 / A5 Quattro AWD 2011 Audi S4 Quattro AWD 2011–2012 Audi Q5 Quattro AWD Key Features 100% New Components — Never remanufactured or rebuilt Forged Steel Construction — Superior strength vs. stamped OEM arms Pre-Installed Rubber Bushings — Absorb vibration & road noise Pre-Lubed Ball Joints — Ready to install, no grease required Precision-Machined Mounting Holes — Guaranteed proper bolt alignment OEM-Spec Torque Tolerance — Meets or exceeds factory standards Symptoms of Worn Control Arms Clunking or knocking noise over bumps Steering wheel vibration at highway speeds Uneven or rapid tire wear (especially inner edges) Loose or wandering steering feel Visible cracks in rubber bushings Installation Notes Professional installation recommended. A wheel alignment is mandatory after control arm replacement. Typical install time: 3–4 hours with basic hand tools and a lift. All hardware is pre-greased from the factory — no additional lubrication needed before install. Why Choose iFJF? 10-Piece Complete Kit — Everything you need in one box OEM+ Quality — Built to the same geometry as factory parts with upgraded materials Cost Savings — Typically 40–60% less than dealer pricing for the full set Fast Shipping — Ships from US warehouse within 1 business day Frequently Asked Questions Q: Will this fit my 2011 Audi A4 without Quattro?A: No, this kit is designed specifically for Quattro (AWD) models. FWD (front-wheel drive) models use different control arm geometry. Q: Are the ball joints pre-greased?A: Yes, all ball joints come pre-lubricated from the factory and are maintenance-free for their service life. Q: What's the difference between the M14 and M12 versions?A: The ball joint stud thread size. 17mm nut = M14 × 1.5 (this listing). 16mm nut = M12 × 1.5 (available in our other listing). Measure your existing ball joint nut before ordering. Q: Do I need a wheel alignment after installing?A: Absolutely. Any control arm replacement changes suspension geometry. A professional 4-wheel alignment is required immediately after installation. Q: How long will these control arms last?A: With normal driving conditions, expect 60,000–100,000 miles of service life. Related Products Shop All Suspension Parts BMW X5/X6 Front Control Arm Kit BMW 745i Front Lower Control Arm Kit

Read more less

Product Overview Maximize your 2011–2015 Chevrolet/GMC Duramax LML's exhaust flow with the iFJF 4" DPF & CAT Delete Pipe (No Muffler). This straight-through race pipe eliminates both the restrictive diesel particulate filter and catalytic converter, replacing them with a mandrel-bent 4-inch T409 stainless steel system that unlocks your 6.6L's hidden power and fuel economy potential. Key Features T409 Stainless Steel — 2mm wall, corrosion resistant, magnetic (unlike T304) 4.0" Mandrel-Bent Tubing — Computer-controlled bends for unrestricted flow Straight Pipe / Race Pipe Design — Maximum volume, maximum performance V-Band Clamp Fitment — Fits 2011–2015 LML models only Factory Hangers Pre-Welded — True bolt-on, no welding or fabrication TIG Welded Joints — Pressure tested, guaranteed leak-free Includes All Hardware — Clamps, bolts, hangers included Vehicle Compatibility Year Make Model Engine 2011–2015 Chevrolet Silverado 2500HD / 3500HD 6.6L Duramax LML 2011–2015 GMC Sierra 2500HD / 3500HD 6.6L Duramax LML ⚠️ NOT Compatible With: 2015.5–2016 models (3-bolt flange), Cab & Chassis trucks. Verify V-band clamp connection at turbo before ordering. Performance Gains Metric Stock (DPF Restricted) After Delete Fuel Economy (Combined) 13–14 MPG 18–19 MPG Exhaust Gas Temperature Elevated 200–300°F Lower Turbo Spool Delayed Immediate / Faster Exhaust Tone Muted Loud, Aggressive Race Tone Frequently Asked Questions Q: How do I know if I have V-band or 3-bolt flange?A: Look where the downpipe connects to the turbo outlet. A V-band clamp uses a single large ring clamp. A 3-bolt flange has three separate bolts in a triangular pattern. 2011–2015 (early) = V-band. 2015.5–2016 = 3-bolt. Q: Will this fit Cab & Chassis trucks?A: No. Cab & Chassis (commercial style) trucks have a different frame and exhaust routing. This is for pickup trucks only. Q: Is T409 stainless steel magnetic?A: Yes — unlike T304, T409 stainless is magnetic. This is normal. A magnet test does NOT mean it's not real stainless steel. Q: Is this loud without a muffler?A: Yes, this is a straight pipe. Expect a significantly louder, more aggressive exhaust note. If you want a quieter tone, see our muffler version (DP-0275). Related Products Shop All DPF Delete Pipes 2011–2015 LML DPF Delete Pipe (With Muffler) Shop EGR Delete Kits for Duramax LML

Read more less

Product Overview Unlock your 2011–2015 Duramax LML's true potential with the iFJF 4" DPF & CAT Delete Race Pipe (with Muffler). This direct bolt-on kit replaces the restrictive factory diesel particulate filter (DPF) and catalytic converter (CAT) with a free-flowing 4-inch T409 stainless steel pipe, dramatically reducing exhaust backpressure and improving both fuel economy and engine responsiveness. The included muffler keeps the exhaust note deep and aggressive without being obnoxiously loud — perfect for daily-driven trucks. All factory-style hangers are pre-welded for a true bolt-on installation with zero fabrication required. Key Features T409 Stainless Steel Construction — 2mm wall thickness, computer mandrel-bent for smooth flow 4.0" Inlet Diameter — Maximum exhaust flow for the 6.6L Duramax LML V-Band Clamp Connection — Fits 2011–2015 models with V-band turbo flange Integrated Muffler — Deep tone without excessive cabin drone Factory Hangers Pre-Welded — Bolt-on installation, no welding required 100% TIG Welded Joints — Pressure tested, guaranteed leak-free Vehicle Compatibility Year Make Model Engine 2011–2015 Chevrolet Silverado 2500HD 6.6L Duramax LML 2011–2015 Chevrolet Silverado 3500HD 6.6L Duramax LML 2011–2015 GMC Sierra 2500HD 6.6L Duramax LML 2011–2015 GMC Sierra 3500HD 6.6L Duramax LML ⚠️ IMPORTANT: V-Band Clamp Only! These kits fit 2011–2015 LML models with V-band clamp connection at the turbo. Will NOT fit 2015.5–2016 models with 3-bolt flange, or Cab & Chassis trucks. Visually verify your turbo connection type before ordering. Performance Benefits Metric Before (Stock DPF) After (DPF Delete) Combined MPG 13–14 MPG 18–19 MPG Exhaust Backpressure High (Restricted) Significantly Reduced Turbo Response Laggy Quick Spool EGT Temperatures Higher 200–300°F Lower Installation Guide Installation takes approximately 1 hour using basic hand tools in your driveway or garage. A cutting tool may be required for shorter wheelbase configurations. All clamps, hangers, and hardware are included — you may need to reuse some factory fasteners. Tuner Required: Removing the DPF, CAT, SCR, and/or DOC eliminates emission-related sensors. A DPF-delete-capable tuner is mandatory to prevent check engine lights and diagnostic trouble codes. We recommend the EZ Lynk AutoAgent for 2015 models. Frequently Asked Questions Q: Will this fit my 2015.5 Duramax?A: No. 2015 is a split year for LML trucks. The 2011–2015 (early) models use a V-band clamp turbo connection. The 2015.5–2016 models switched to a 3-bolt flange. This pipe only fits V-band clamp models — visually check your turbo outlet. Q: Is a tuner absolutely required?A: Yes. Removing emissions equipment will trigger check engine lights and potentially limp mode without a DPF-delete-capable tuner. This is not optional. Q: Will this pass emissions inspection?A: This product is intended for off-road and competition use only. It is not CARB compliant and will not pass emissions testing in states that require DPF/CAT inspection. Q: How much louder is it with the muffler vs. without?A: The muffler version produces a deep, throaty tone that's noticeably louder than stock but significantly quieter than a straight-pipe setup. Zero cabin drone at highway speeds. Q: Do I need any special tools for installation?A: Basic hand tools (sockets, wrenches, pry bar). A reciprocating saw may be needed if your factory exhaust is rusted in place. A lift makes the job faster but isn't required. Related Products Shop All DPF Delete Pipes 2011–2015 LML DPF Delete Pipe (No Muffler) Shop EGR Delete Kits for LML

Read more less