Product Overview
The iFJF 6PK2225 Serpentine Belt is a premium EPDM rubber drive belt engineered for reliable accessory drive performance across a wide range of vehicles including Eldorado 1990, Fleetwood 1990, Seville 1990, C1500 1997-1999, C2500 1997-2000, C3500 1997-2000. With 6 ribs and an effective length of 2225mm (87.6 inches), this belt delivers smooth, quiet power transfer to your alternator, power steering pump, A/C compressor, and water pump — ensuring your vehicle's essential systems run without interruption.
Key Features
Premium EPDM Construction — High-grade ethylene propylene diene monomer (EPDM) rubber resists heat, ozone, cracking, and glazing for significantly longer service life compared to conventional neoprene belts. Factory-rated for 60,000-100,000+ mile durability.
Precision-Engineered Fit — 6 ribs × 2225mm effective length (87.6") matches OEM dimensional specifications. Precision-ground rib angles ensure full pulley groove contact for maximum grip and zero slip.
Quiet Operation Technology — Advanced rib profile design and fiber-loaded backing material absorb harmonics and eliminate belt squeal, chirp, and vibration across all RPM ranges and operating temperatures.
High-Strength Tensile Cords — Reinforced polyester tensile cords resist stretching and maintain optimal belt tension throughout the entire service interval, eliminating the need for frequent re-tensioning.
Extreme Temperature Stability — Performs reliably from -40°F to +250°F (-40°C to +121°C). Ideal for cold winter starts and punishing under-hood heat in summer traffic.
OE-Grade Manufacturing — Produced to meet or exceed OEM specifications for material composition, dimensional accuracy, rib geometry, and durability testing standards.
Vehicle Compatibility
This 6PK2225 serpentine belt fits the following vehicles. Always verify your existing belt length and rib count before ordering — belt routing configurations can vary by engine option and accessory package.
Make
Year Range
Belt Spec
Eldorado
1990
6 Rib 87.6"
Fleetwood
1990
6 Rib 87.6"
Seville
1990
6 Rib 87.6"
C1500
1997-1999
6 Rib 87.6"
C2500
1997-2000
6 Rib 87.6"
C3500
1997-2000
6 Rib 87.6"
Technical Specifications
Specification
Value
Part Number
6PK2225
Rib Count
6 Ribs (PK Profile)
Effective Length
2225mm / 87.6"
Material
EPDM Rubber with Fiber-Reinforced Backing
Tensile Cord
High-Strength Polyester
Temperature Range
-40°F to +250°F (-40°C to +121°C)
OE Cross-References
6PK2225, 5060875, K060875, 4060875
iFJF SKU
FJ-PD6-2225
Why Choose iFJF Serpentine Belts?
iFJF serpentine belts are manufactured to the same exacting standards as major OEM and premium aftermarket brands — at a fraction of the dealership price. Every belt undergoes dimensional verification, rib profile inspection, and material testing to ensure consistent quality. We're confident in our product and back every purchase with responsive US-based customer support and a hassle-free return policy.
Whether you're doing routine maintenance on a daily driver, refreshing a project car, or building a fleet service schedule, the iFJF 6PK2225 delivers dependable performance you can count on — mile after mile, season after season.
Installation Guide
Locate the belt routing diagram — Usually found on a sticker under the hood, in the engine compartment, or in your owner's manual. Take a photo before removing the old belt.
Release tension — Use a serpentine belt tool or long-handle ratchet/breaker bar on the automatic tensioner pulley. Rotate the tensioner to release belt tension.
Remove old belt — Slide the belt off the pulleys, noting the routing path. Inspect all pulleys and the tensioner for wear, noise, or roughness while the belt is off.
Install new belt — Route the iFJF 6PK2225 following the diagram, ensuring the ribbed side contacts all grooved pulleys. The smooth back side runs against smooth/idler pulleys.
Verify installation — Double-check that the belt is fully seated in every pulley groove with no rib overhang. Start the engine and listen for abnormal noise — any squeal or chirp indicates misrouting or a pulley issue.
Frequently Asked Questions
Q: Will this belt fit my specific vehicle?
A: The 6PK2225 belt measures 6 ribs × 2225mm (87.6"). Check the compatibility table above. For vehicles not listed, measure your existing belt's effective length and rib count, or cross-reference your OEM part number against the OE numbers listed in the specifications table.
Q: What makes EPDM better than traditional neoprene belts?
A: EPDM (ethylene propylene diene monomer) rubber offers 3 key advantages: (1) superior heat and ozone resistance — won't crack or glaze like neoprene, (2) 2-3x longer service life (60K-100K+ miles vs 30K-50K for neoprene), (3) quieter operation with better vibration damping. Most vehicles manufactured after 2000 come factory-equipped with EPDM belts.
Q: How do I know when to replace my serpentine belt?
A: Watch for these warning signs: squealing/chirping from the engine bay (especially on cold start or when turning the steering wheel), visible cracks, glazing (shiny/smooth rib surface), frayed edges, rib separation, or missing chunks. We recommend inspection at every oil change and replacement every 60,000-100,000 miles or when wear indicators show.
Q: Can I replace this belt myself?
A: Yes! Serpentine belt replacement is a beginner-friendly DIY job on most vehicles. You typically need: a serpentine belt tool or long-handle ratchet, the belt routing diagram, and basic hand tools. Average DIY install time is 15-45 minutes depending on vehicle accessibility. Some transverse-mounted V6 engines with limited clearance may require more patience.
Q: What happens if the belt breaks while driving?
A: A broken serpentine belt immediately disables the alternator (battery warning light on, electrical systems draining), power steering (steering becomes very heavy at low speeds), water pump on most vehicles (engine begins overheating within minutes), and A/C compressor. Pull over safely and shut off the engine immediately to prevent costly overheating damage.
Q: Should I replace anything else while doing the belt?
A: It's smart to inspect and consider replacing the belt tensioner and idler pulleys simultaneously — they have similar service lives. A worn tensioner can cause a new belt to fail prematurely. Spin each pulley by hand with the belt off: any roughness, noise, or play means replacement is needed.
Q: What's your warranty and return policy?
A: iFJF serpentine belts are backed by a satisfaction guarantee. If you receive a defective product or encounter a fitment issue, contact our support team for a prompt replacement or refund. We stock these belts in our US warehouses for fast delivery.
Related Products & Companion Parts
For a complete drive belt system refresh, consider these companion parts:
Belt Tensioner Assembly — Maintains proper belt tension; replace if bearing is noisy or tensioner shows signs of wear
Idler Pulley(s) — Smooth pulleys ensure optimal belt tracking; replace if any roughness or play is detected
A/C Compressor Belt — Some vehicles use a separate belt for the A/C compressor
Water Pump — Consider replacing while the cooling system is accessible (labor-saving opportunity)
Ready for a Belt Replacement?
Get the iFJF 6PK2225 — premium EPDM construction, OE-grade quality, unbeatable value.
✅ Fast & Free Shipping on Orders $50+ | ✅ US Stock | ✅ Easy Returns
Read more less
