Off Road

1.High Quality: Heavy-duty material, made from 3/16" steel which is nice and will be very sturdy for your LED whips.This mounting brackets use hard material that will not deform. The surface is treated with black powder coating without rust2.Multipurpose: It is widely used in a variety of usage scenarios, such as Fiberglass whips, Go Pro, Radios Antenna mounts, Lighted Whips and so on3.Adjustable: It can be installed in two ways, and can adjust the angle of 30 degrees, allowing you to quickly adjust the mounting bracket to the position you want.And the notch cut design is for a tidy while wiring the wire.You can adjust the angle of the mount for a custom look. 4.Easy installation, x3 whip flag brackets mount on the exit holes on the right & left side rear upper pillars with stock bolts. No modification or drilling is required. The rear pillars already have mounting holes for bracket installation.5.This bracket adds hareness storage for a tidy look. 6.compatible with :2pcs X3 whip light mounting brackets will be compatible with 2017 2018 2019 2020 2021 2022 Can Am Maverick X3 and X3 Max all models,such as X3 RS Turbor, X3 Max Ds Turbo RR.

Read more less

Fitment:UTV Windshield Mounting Clips Straps for Cage Diameters 1.5”-2” Round Tubing. Replaces parts:Commander,Wildcat Trail,Prowler 1000-700,KYMCO,Polaris Ranger RZR,Pioneer 500 700 1000,etc. Material:Made of ABS plastic with nylon and rubber straps,long lifetime and durable,not easy to slip. Easy to install:These clamps comfortable and easy to adjust to hold and release your windshield. Package includes: 2 x Windshield Mounting Clamps Straps.

Read more less

East to install LED work lights without drilling holes. And fits lights bars with 10mm mounting screws. It can be used on tubes of 1’’, 1-1/2’’, 1-3/4’’ and 2’’. Suitable for ATV, UTV, Off-road vehicle, Jeeps and more. Made of strong aluminum alloy which is durable, anti rust and anti-corrosion. High quality rubber inserts are available in a wider range of sizes to help restrain vibrations while riding. Package include: Clamp, rubber insert, doubled sided tape, Allen hex key, washer and screw.

Read more less

Fitment: UTV all-terrain wiper is suitable for Polaris/Can Am/Arctic Cat/Kawasaki. Features: The selected material is smooth and does not hurt the glass, hand operated winshield wiper with the precision tensioned steel spring,UTV windshield wiper can uniform pressure along the entire blade length. Practical performance: The hand-held wiper can help us reduce the consumption of electricity storage in the car, help us to overcome the interference of rain and snow weather at any time, and more effectively clean the rain and snow on the front windshield. Advantages: There is no need to worry about power consumption when using, no scratches and abnormal sound when working so as to ensure your vision more clear. Easy Installation: When installing this manual wiper, we drill a hole with a diameter of 1/2 "on the windshield glass. The installation steps are shown in the figure to ensure correct installation.

Read more less

Compatible with:This horn fits universal car,truck,motorcycle,RV,UTV,ATV,SUV,Pickup and any other 12V vehicles. Replaces part number:72102,AM80SX. Material:High-quality ABS material waterproof shell, fixed bracket iron sheet.Snail shape makes it compact and exquisite,improve the vehicle's output sound quality, and produce clear and loud sound. Function:The horn loudness 130db,attracts more attention,helps to warn other vehicles and pedestrian. Package includes:1 x high tone horn,mounting brackets,nut.

Read more less

Features Cable Protection: Prevents winch motor and gears from pulling cable too far and bottoming out on rollers. Reduces cable wear during recovery operations. Elastic Rubber Material: Made of high-quality rubber with excellent elasticity. Eliminates rattling and quivering of hook/cable guide while sliding. Tension Maintenance: Keeps constant tension on the hook to prevent cable from becoming loose during storage or operation. Complete Hardware Kit: Includes 2 half-rubber stoppers, 4 screws, 4 nuts, 8 washers, and 1 Allen wrench. Zinc-coated iron hardware resists oxidation and corrosion. Versatile Application: Also works on weight machines to replace original ball stoppers. Compatibility ATV & UTV winch systems SUV winch setups including Jeep Wrangler Arctic Cat, Golf Cart & CAN-AM vehicles with winches Standard winch cable/rope configurations Package Includes 2x Rubber hook stopper halves 4x Screws (zinc-coated iron) 4x Nuts (zinc-coated iron) 8x Washers 1x Allen wrench FAQ Q: Will this fit my Jeep Wrangler's winch?A: Yes, it fits most standard winch setups including Jeep Wrangler aftermarket winches. Q: How does it prevent cable damage?A: It acts as a bumper, preventing the hook from slamming into the winch fairlead/rollers, which can damage both hook and winch. Q: Is installation difficult?A: No, simply sandwich the rubber pieces around your cable and tighten with provided hardware. Install in minutes.

Read more less

\nHand-Mic Mount Base for Jeep Wrangler & Off-Road SUV - Yellow\nKeep your radio microphone securely in place during off-road adventures. This durable mount base is compatible with popular Yaesu radio models including FTM-300DR, FTM-7250DR, FTM-400DR, and FT-450D.\n\nKey Features\n\n Radio Compatibility: Fits FTM-300DR, FTM-300, FTM-7250DR, FTM-7250, FTM-400DR, FT-450D\n Secure Mounting: Stable base prevents microphone movement during off-road driving\n Premium Finish: Yellow coating for style and corrosion resistance\n Easy Install: Mounts to roll bar or dashboard with common off-road radio setups\n Durable Construction: Built to withstand vibration and outdoor conditions\n\n\nCompatibility\n\nJeep Wrangler JK/JKU/JL/JLU/YJ/TJ\nChevy vehicles with off-road radio setup\nFD Off-Road SUV configurations\nYaesu FTM series mobile radios\n\n\nInstallation\n\nChoose mounting location (roll bar recommended)\nAttach base using appropriate hardware (not included)\nInsert microphone into mount\nTest for secure fit during vibration\n\n\nFAQ\nQ: Does this include the microphone?A: No, this is the mount base only. Microphone sold separately.\nQ: Will it fit other radio brands?A: This mount is designed for Yaesu handheld microphones with standard mounting pattern.\n

Read more less

\nHand-Mic Mount Base for Jeep Wrangler & Off-Road SUV - Red\nKeep your radio microphone securely in place during off-road adventures. This durable mount base is compatible with popular Yaesu radio models including FTM-300DR, FTM-7250DR, FTM-400DR, and FT-450D.\n\nKey Features\n\n Radio Compatibility: Fits FTM-300DR, FTM-300, FTM-7250DR, FTM-7250, FTM-400DR, FT-450D\n Secure Mounting: Stable base prevents microphone movement during off-road driving\n Premium Finish: Red coating for style and corrosion resistance\n Easy Install: Mounts to roll bar or dashboard with common off-road radio setups\n Durable Construction: Built to withstand vibration and outdoor conditions\n\n\nCompatibility\n\nJeep Wrangler JK/JKU/JL/JLU/YJ/TJ\nChevy vehicles with off-road radio setup\nFD Off-Road SUV configurations\nYaesu FTM series mobile radios\n\n\nInstallation\n\nChoose mounting location (roll bar recommended)\nAttach base using appropriate hardware (not included)\nInsert microphone into mount\nTest for secure fit during vibration\n\n\nFAQ\nQ: Does this include the microphone?A: No, this is the mount base only. Microphone sold separately.\nQ: Will it fit other radio brands?A: This mount is designed for Yaesu handheld microphones with standard mounting pattern.\n

Read more less

\nHand-Mic Mount Base for Jeep Wrangler & Off-Road SUV - Blue\nKeep your radio microphone securely in place during off-road adventures. This durable mount base is compatible with popular Yaesu radio models including FTM-300DR, FTM-7250DR, FTM-400DR, and FT-450D.\n\nKey Features\n\n Radio Compatibility: Fits FTM-300DR, FTM-300, FTM-7250DR, FTM-7250, FTM-400DR, FT-450D\n Secure Mounting: Stable base prevents microphone movement during off-road driving\n Premium Finish: Blue coating for style and corrosion resistance\n Easy Install: Mounts to roll bar or dashboard with common off-road radio setups\n Durable Construction: Built to withstand vibration and outdoor conditions\n\n\nCompatibility\n\nJeep Wrangler JK/JKU/JL/JLU/YJ/TJ\nChevy vehicles with off-road radio setup\nFD Off-Road SUV configurations\nYaesu FTM series mobile radios\n\n\nInstallation\n\nChoose mounting location (roll bar recommended)\nAttach base using appropriate hardware (not included)\nInsert microphone into mount\nTest for secure fit during vibration\n\n\nFAQ\nQ: Does this include the microphone?A: No, this is the mount base only. Microphone sold separately.\nQ: Will it fit other radio brands?A: This mount is designed for Yaesu handheld microphones with standard mounting pattern.\n

Read more less

\nHand-Mic Mount Base for Jeep Wrangler & Off-Road SUV - Black\nKeep your radio microphone securely in place during off-road adventures. This durable mount base is compatible with popular Yaesu radio models including FTM-300DR, FTM-7250DR, FTM-400DR, and FT-450D.\n\nKey Features\n\n Radio Compatibility: Fits FTM-300DR, FTM-300, FTM-7250DR, FTM-7250, FTM-400DR, FT-450D\n Secure Mounting: Stable base prevents microphone movement during off-road driving\n Premium Finish: Black coating for style and corrosion resistance\n Easy Install: Mounts to roll bar or dashboard with common off-road radio setups\n Durable Construction: Built to withstand vibration and outdoor conditions\n\n\nCompatibility\n\nJeep Wrangler JK/JKU/JL/JLU/YJ/TJ\nChevy vehicles with off-road radio setup\nFD Off-Road SUV configurations\nYaesu FTM series mobile radios\n\n\nInstallation\n\nChoose mounting location (roll bar recommended)\nAttach base using appropriate hardware (not included)\nInsert microphone into mount\nTest for secure fit during vibration\n\n\nFAQ\nQ: Does this include the microphone?A: No, this is the mount base only. Microphone sold separately.\nQ: Will it fit other radio brands?A: This mount is designed for Yaesu handheld microphones with standard mounting pattern.\n

Read more less

【PERFECT FIT】Designed specifically for the Gladiator 2019-2023 models, the gas cap holder ensures a seamless fit. It securely holds the gas cap cover without affecting the use of the fuel tank cap.【 INNOVATIVE GEAR DESIGN】With its unique gear design,offers convenience and security. Align the protruding part of the gas cap with either gear, and easily lock it in place without the risk of slipping off.【EASY INSTALL】Installing the gas cap holder is a breeze. It fits directly into the recessed flat surface area on the inside of the gas lid, just few minutes install with adhesive pad already attached.Make sure to clean the area before you stick it on.【HIGH QUALITY】Our gas cap holder is crafted with high-quality plastic material, ensuring exceptional durability and longevity. Built to withstand diverse climates, it is designed for long-term use, providing you with reliable performance no matter the weather conditions. 【PREFECT GIFT】This fuel tank cover bracket is a breakthrough that many gladiator car owners have yet to discover. This innovative fuel tank cover bracket is a practical addition to their gladiator,give your family and friends a gift they'll truly appreciate.

Read more less

iFJF Jeep Wrangler JK Mesh Sun Shade Top Cover The iFJF Mesh Sun Shade delivers the perfect balance of open-air freedom and sun protection for your 2007-2018 Jeep Wrangler JK. Whether you're crawling trails or cruising highways, this durable mesh top cover blocks harsh UV rays, reduces wind buffeting, and keeps the interior cooler — all while maintaining that open-top Wrangler experience. Compatible with both 2-door and 4-door JK models, hardtop or soft top. Key Features Superior UV Protection — High-density mesh blocks up to 90% of harmful UV rays, protecting your skin and preventing interior fading on scorching summer days. Wind & Noise Reduction — Strategically woven mesh design significantly cuts wind buffeting and road noise at highway speeds for a more comfortable ride. Breathable Airflow Design — Open-weave construction allows maximum airflow, keeping the cabin ventilated and cool without trapping heat. Tool-Free Installation — No drilling, no modifications required. Simply thread the included bungee cords through the reinforced grommets and secure to your roll cage. Installs in under 10 minutes. Hardtop & Soft Top Compatible — Works flawlessly under both factory hardtops and soft tops. Leave it installed year-round as a permanent headliner solution. Heavy-Duty Durability — Constructed from high-density mesh PVC with double-stitched edges and corrosion-resistant metal grommets. Fade-resistant and anti-aging for seasons of use. Compact Storage — Lightweight and foldable. Packs down small in the included storage bag when not in use. Compatibility Vehicle Year Range Body Style Jeep Wrangler JK 2007-2018 2 Door Jeep Wrangler JK Unlimited 2007-2018 4 Door Jeep Wrangler JK Sahara 2007-2018 2 Door / 4 Door Jeep Wrangler JK Rubicon 2007-2018 2 Door / 4 Door Jeep Wrangler JK Sport / Sport S 2007-2018 2 Door / 4 Door Top Compatibility: Works with both factory hardtop and soft top. Can be installed independently or layered underneath. Installation Instructions Lay the mesh sun shade flat over the top of your Wrangler's roll cage. Align the front edge with the windshield header. Starting from the front center, thread each bungee cord through the corresponding grommet hole on the shade. Loop the bungee cord around the roll cage bar and hook it back through the grommet. Do not over-tighten — maintain light, even tension. Work your way around the perimeter, alternating sides to keep tension even. Follow this order: front → sides → rear. Tuck any excess bungee cord ends under the shade for a clean, finished look. For hardtop use: install the shade first, then reinstall the hardtop panels over it. For soft top: the shade sits underneath the soft top fabric. Frequently Asked Questions Q: Can I leave this installed under my hardtop? A: Absolutely. The slim mesh profile fits perfectly under both factory hardtops and soft tops. Many owners leave it installed year-round as a permanent headliner solution. Q: Will this cause flapping noise at highway speeds? A: No. When properly tensioned using the included bungee cords, the mesh stays taut and stable. The open-weave design actually reduces wind buffeting compared to running completely topless. Q: Does it work with the Freedom Top panels? A: Yes. You can install the sun shade and then place the Freedom Top panels back on without any interference. Simply remove the panels for an open-air experience while keeping the shade for sun protection. Q: How does it handle rain? A: This is a mesh shade, not a waterproof top. Water will pass through the mesh weave. It is designed specifically for sun protection and wind reduction — pair it with your hardtop or soft top for rain protection. Q: What's included in the package? A: 1 × Mesh Sun Shade Top Cover, complete set of high-strength bungee cords, and 1 × compact storage bag. Specifications Material: High-Density Mesh PVC UV Block Rate: Up to 90% Fitment: 2007-2018 Jeep Wrangler JK 2-Door & 4-Door Installation: Bungee cord system, no tools required SKU: FJ-JP-NET11-CK

Read more less

Stop Hard Top Leaks & Wind Noise — iFJF Roof Flow Seal Strip If your Jeep Wrangler hard top is letting in water, dust, or excessive wind noise on the highway, the iFJF Roof Flow Seal Strip is the fix. Designed specifically for the Wrangler JK and JL hard top roofline, this high-density EPDM rubber weatherstrip seals the gap between the windshield frame and hard top — the #1 leak point on Wrangler hard tops. Stop water dripping onto your dash and enjoy a quieter cabin in one 15-minute install. Key Features Premium EPDM Rubber — Unlike cheap foam strips that compress and fail within months, our seal strip uses automotive-grade EPDM rubber with high elasticity and memory rebound. It maintains its shape through repeated hard top on/off cycles. Waterproof & Dustproof Seal — The precision profile creates a tight compression seal between the windshield header and hard top leading edge, blocking rainwater, car wash spray, and trail dust from entering the cabin. Highway Wind Noise Reduction — Eliminates the whistle and buffeting caused by air rushing through the windshield-to-hard top gap. Noticeably quieter cabin at highway speeds (55–75 mph). UV & Weather-Resistant — Formulated to withstand extreme sun exposure, freezing winters, and heat cycling without cracking, shrinking, or losing elasticity. Built for year-round performance. Easy Peel-and-Stick Install — Pre-cut to length with automotive-grade 3M adhesive backing. Clean the surface, peel, stick, press — no special tools or mechanical skills required. Installs in approximately 15 minutes. Compatibility Model Years Body Style Top Type Wrangler JK / JKU 2007 – 2018 2-Door & 4-Door Hard Top Only Wrangler JL / JLU 2018 – 2022 2-Door & 4-Door Hard Top Only ⚠️ Not compatible with soft tops or Sky One-Touch power top. Hard top (Freedom Panel or one-piece) required. FAQ Q: How do I install the Roof Flow Seal Strip? A: Installation is straightforward — clean the windshield frame top surface with the included alcohol prep pad, let it dry completely, peel the adhesive backing, align the strip along the windshield header edge, and press firmly along the entire length. For best adhesion, install when the temperature is above 50°F (10°C) and avoid getting the surface wet for 24 hours after install. Q: Does this affect hard top removal or reinstallation? A: No. The seal strip sits on the windshield frame, not the hard top itself. You can remove and reinstall your hard top as normal — the strip stays in place and simply compresses when the hard top is clamped down. It will not interfere with Freedom Panel removal either. Q: How long does the seal strip last? A: With proper installation, the EPDM rubber and 3M adhesive are rated for 3–5+ years of outdoor exposure. Extreme climates (desert heat, salted winter roads) may shorten lifespan slightly. Inspect annually for any lifting or wear. Q: How is this different from other Wrangler seal strips? A: Many budget alternatives use open-cell foam that absorbs water and collapses over time. Our EPDM rubber is closed-cell, meaning it won't absorb moisture or lose its compression rebound after repeated clamping cycles. The adhesive is genuine 3M automotive-grade tape, not generic double-sided tape that peels off in summer heat. Installation Tips Surface Prep is Critical: Use the included alcohol wipe to thoroughly clean the windshield frame surface. Any dirt, wax, or silicone residue will compromise adhesion. Temperature Matters: Install in 50–90°F (10–32°C) for optimal adhesive bonding. If installing in colder weather, warm the surface with a heat gun or hair dryer first. Dry Fit First: Before peeling the backing, lay the strip in position to confirm alignment and length. Trim if necessary with sharp scissors. Press Firmly: After sticking, apply firm, even pressure along the entire length for 30–60 seconds. A roller tool (or the back of a spoon) helps ensure full contact. Cure Time: Allow the adhesive to cure for at least 24 hours before exposing to water or highway speeds for maximum bond strength. Package Includes: 1 × Roof Flow Seal Strip, 1 × Alcohol Prep Pad, Installation Guide Brand: iFJF | SKU: JP-SEAL11-CK | Material: EPDM Rubber with 3M Adhesive Backing

Read more less

Features Universal Stabilizer Compatibility — Works with any steering stabilizer that has a 1-3/8" mounting width and a 1/2" bolt. Stainless Steel Construction — Made of high-strength stainless steel with black powder coating to resist oxidation and rust in off-road conditions. Left Hand Drive Design — Engineered for LHD Jeep Wrangler JK models; no lift required for installation. Simple Mounting Solution — The most straightforward way to relocate your steering stabilizer and avoid interference with aftermarket components. Compatibility Fits 2007-2018 Jeep Wrangler JK (all trims, 2-door & 4-door) Fits 2007-2018 Jeep Wrangler JK Unlimited Compatible with Left Hand Drive (LHD) models only Stabilizer Compatibility: Any stabilizer with 1-3/8" mounting width and 1/2" bolt No lift required — fits stock height and lifted Jeeps FAQQ: When would I need to relocate my steering stabilizer?A: If your stabilizer interferes with a lift kit, aftermarket bumper, or other modifications, this bracket relocates it to a clear position.Q: Is this the same as product 8374169764086?A: This is a similar steering stabilizer relocation bracket at a different price point. Both fit 2007-2018 JK models with the same stabilizer compatibility specifications.Q: Do I need a lift kit to install this?A: No, this relocation bracket fits both stock and lifted Jeep Wrangler JK models — no lift required.

Read more less

Features Universal Stabilizer Fit — Works with any steering stabilizer that has a 1-3/8" mounting width and a 1/2" bolt, giving you flexibility in stabilizer choice. High-Strength Stainless Steel — Made from high-strength stainless steel with black powder coating to resist oxidation, rust, and off-road abuse. Left Hand Drive Mount — Designed for LHD Jeep Wrangler JK models; no lift required for installation. Simple Installation — Straightforward bracket relocation that properly positions your steering stabilizer to avoid interference with other components. Compatibility Fits 2007-2018 Jeep Wrangler JK (all trims, 2-door & 4-door) Fits 2007-2018 Jeep Wrangler JK Unlimited Compatible with Left Hand Drive (LHD) models only Stabilizer Compatibility: Any stabilizer with 1-3/8" mounting width and 1/2" bolt No lift required — fits stock and lifted Jeeps FAQQ: Why do I need a steering stabilizer relocation bracket?A: When installing a lift kit or aftermarket bumper, the stock stabilizer location may interfere with other components. This bracket relocates it to a clear position.Q: Will this fit my right-hand-drive Jeep?A: No, this bracket is designed for left-hand-drive (LHD) JK models only.Q: Do I need a lift kit to install this?A: No, this relocation bracket fits both stock and lifted Jeep Wrangler JK models.

Read more less

Features DOT Approved — Meets DOT standards and is pressure tested to 4,000 PSI for reliable, safe braking performance on and off the road. Stainless Steel Braided — Braided stainless steel exterior protects against off-road debris, rocks, and mud; prevents internal hose expansion for firmer pedal feel. Leak-Free Connections — High-quality hollow fasteners at both ends provide a secure, leak-free flow path for consistent braking performance. Extended for Lifted Jeeps — Part #89708, designed specifically for Jeep Wrangler JK models with 4-6" of suspension lift. Compatibility Fits 2007-2018 Jeep Wrangler JK (2-door) — 4-6" lift required Fits 2007-2018 Jeep Wrangler JK Unlimited (4-door) — 4-6" lift required Part Number: 89708 (Rear) Recommended for: 4"-6" suspension lift kits FAQQ: Are these rear brake lines sold as a pair?A: Yes, this listing includes extended rear brake lines for both the left and right rear positions of your Jeep Wrangler JK.Q: Can I use these with a 2" lift?A: These are designed for 4-6" lifts. Using them with less lift may cause excess slack — proper routing is essential to avoid damage.Q: Do I need to bleed the brakes after installation?A: Yes, always bleed the brake system after installing new brake lines to remove air and ensure optimal braking performance.

Read more less

iFJF Rear License Plate Relocation Bracket for Jeep Wrangler JK JKU 2007-2017 with LED Light Upgrade your Jeep with this premium iFJF accessory. Engineered for perfect fitment and durability in off-road conditions. Key Features Premium Quality: Made from high-grade materials for long-lasting performance Perfect Fit: Direct replacement designed specifically for your Jeep model Easy Installation: No drilling or modifications required for most applications Durable Construction: Weather-resistant materials withstand harsh conditions iFJF Quality: Trusted by off-road enthusiasts nationwide Vehicle Compatibility Designed for Jeep Wrangler models as specified in product title Replaces OEM part numbers where applicable Check fitment guide before ordering Frequently Asked Questions Q: Is this difficult to install? A: Most customers complete installation in under 30 minutes with basic tools. Q: Does this include all necessary hardware? A: Yes, all mounting hardware is included unless otherwise noted in description. Q: Will this fit my specific Jeep model? A: Please verify your year/make/model against our fitment list before ordering. Why Choose iFJF? iFJF specializes in premium aftermarket accessories for Jeep Wrangler and off-road vehicles. Our products are tested in real-world conditions to ensure reliability on the trail. Fast Shipping: Orders ship within 1-2 business days from our US warehouse. Customer Support: Our Jeep experts are here to help with any questions.

Read more less

FITMENT: 2007-2017 Wrangler JK JKU Rubicon Model.Material: the handle and body is made of high quality Aluminum.Not easy to be broken.Light and strong.Easy installation.Function:The Rubicon Electric Swaybar is great,but it is always prone to failure, shorting out and all around being annoying. The manual swaybar disconnect replace the this ones, allowing you to disconnect your Rubicon Swaybar at anytime, with a few turns of the dial in any gear and with any amount of articulation.Benefits:No need to bounce the Rubicon, no pins to pull or fighting to reinstall, no sway bar links to remove, no punctured tires from removed sway bar links, just unrestricted articulation. Simply turn the dial a few turns in the opposite direction on level or uneven ground when back to the highway and your sway bar will fully reconnect by itself for highway use.Replace OE Number: 1087.

Read more less

iFJF Hood Stop Support Rubber Hood Bumper Rest for Jeep Wrangler JK 2007-2017 - 2 Pack Upgrade your Jeep with this premium iFJF accessory. Engineered for perfect fitment and durability in off-road conditions. Key Features Premium Quality: Made from high-grade materials for long-lasting performance Perfect Fit: Direct replacement designed specifically for your Jeep model Easy Installation: No drilling or modifications required for most applications Durable Construction: Weather-resistant materials withstand harsh conditions iFJF Quality: Trusted by off-road enthusiasts nationwide Vehicle Compatibility Designed for Jeep Wrangler models as specified in product title Replaces OEM part numbers where applicable Check fitment guide before ordering Frequently Asked Questions Q: Is this difficult to install? A: Most customers complete installation in under 30 minutes with basic tools. Q: Does this include all necessary hardware? A: Yes, all mounting hardware is included unless otherwise noted in description. Q: Will this fit my specific Jeep model? A: Please verify your year/make/model against our fitment list before ordering. Why Choose iFJF? iFJF specializes in premium aftermarket accessories for Jeep Wrangler and off-road vehicles. Our products are tested in real-world conditions to ensure reliability on the trail. Fast Shipping: Orders ship within 1-2 business days from our US warehouse. Customer Support: Our Jeep experts are here to help with any questions.

Read more less

iFJF Hood Lock for Jeep Wrangler JK JKU 2007-2017 - Anti-Theft Stainless Steel with Key Upgrade your Jeep with this premium iFJF accessory. Engineered for perfect fitment and durability in off-road conditions. Key Features Premium Quality: Made from high-grade materials for long-lasting performance Perfect Fit: Direct replacement designed specifically for your Jeep model Easy Installation: No drilling or modifications required for most applications Durable Construction: Weather-resistant materials withstand harsh conditions iFJF Quality: Trusted by off-road enthusiasts nationwide Vehicle Compatibility Designed for Jeep Wrangler models as specified in product title Replaces OEM part numbers where applicable Check fitment guide before ordering Frequently Asked Questions Q: Is this difficult to install? A: Most customers complete installation in under 30 minutes with basic tools. Q: Does this include all necessary hardware? A: Yes, all mounting hardware is included unless otherwise noted in description. Q: Will this fit my specific Jeep model? A: Please verify your year/make/model against our fitment list before ordering. Why Choose iFJF? iFJF specializes in premium aftermarket accessories for Jeep Wrangler and off-road vehicles. Our products are tested in real-world conditions to ensure reliability on the trail. Fast Shipping: Orders ship within 1-2 business days from our US warehouse. Customer Support: Our Jeep experts are here to help with any questions.

Read more less

Features Adjustable for 2.5"-6" Lifts — Designed to work with a wide range of lift heights, ensuring proper sway bar geometry at any ride height. Replace #2034 — Direct replacement for the fixed mounted version of 2030 and 2034 front sway bar disconnects, with adjustable upgrade. Easy 2-Pin Removal — Comes off with just 2 pins for quick disconnect when hitting the trails; sturdy construction stays in place on road. Improved Off-Road Articulation — Disconnecting the sway bar allows for maximum wheel travel and better traction on uneven terrain. Complete Kit — Includes adjustable front swaybar quicker disconnect system with all mounting hardware and instructions. Compatibility Fits 2007-2018 Jeep Wrangler JK (2-door) Fits 2007-2018 Jeep Wrangler JK Unlimited (JKU) (4-door) Compatible with 2.5" to 6" suspension lifts Replaces Rugged Ridge 2034 and 2030 sway bar disconnects FAQQ: How do I adjust these for my lift height?A: The adjustable design allows you to set the correct length for lifts between 2.5" and 6". Follow the included instructions for your specific lift height.Q: Should I disconnect the sway bar on the street?A: No, sway bar disconnects should only be used off-road. Reconnect before driving on paved roads for safe handling.Q: What's included in the kit?A: The kit includes the adjustable front swaybar quicker disconnect system, all necessary mounting hardware, and detailed installation instructions.

Read more less

Features Adjustable Ride Height — Dial in your front lift from 0 up to 1.5" (up to 3.75" max) without removing suspension components. Billet Aluminum Construction — CNC-machined from solid aluminum for anti-corrosion, anti-rust performance and superior hardness that won't deform under load. Isolator Pad Included — Upper spring seat uses a new isolator pad to dampen road noise and vibration for a comfortable ride. Quick & Convenient — Adjustable coils on spacers make height adjustments fast and easy, perfect for compensating heavy accessories or levelling an unlevel vehicle. Clearance for Larger Tires — Adds front ride height to accommodate larger tires and improve off-road ground clearance. Compatibility Fits Jeep Wrangler TJ (1997-2006) Fits Jeep Wrangler LJ (2004-2006) Fits Jeep Cherokee XJ (1984-2001) — Note: Upper spring bracket is welded on XJ; part of original base configuration needs to be cut for installation. Fits Jeep Comanche MJ (1986-1992) Fits Jeep Grand Cherokee ZJ (1993-1998) FAQQ: How much lift can I get with this spacer?A: The adjustable design allows up to 1.5" increase for front applications, with a maximum of up to 3.75" depending on coil position.Q: Will this fit my Cherokee XJ?A: Yes, but note that the XJ has a welded upper spring bracket — part of the original configuration must be cut for proper installation.Q: Do I need to disassemble the suspension to adjust?A: No, the adjustable coil spacer design lets you change ride height without removing any suspension components.

Read more less

💡 iFJF Dual A-Pillar Brackets for Jeep Wrangler JK/JKU (2007-2017) Mount additional off-road lighting with these dual A-pillar brackets. Designed for the windshield hinge area, these brackets allow you to add two LED work lights, spotlights, or fog lights to your Wrangler JK/JKU for enhanced visibility on the trail. 🚗 Compatibility Wrangler JK (2-door): 2007-2017 Wrangler JKU (4-door): 2007-2017 Mounting Location: A-Pillar / Windshield Hinge Light Type: Compatible with most LED work lights, fog lights, spotlights ⚡ Key Features Dual A-Pillar Design: Each bracket allows mounting of 2 lights for maximum illumination High-Strength Steel: Made of steel with black coating for anti-oxidation and anti-corrosion Precise Fitment: Engineered for Wrangler JK/JKU windshield hinge area Off-Road Ready: Built to withstand vibration and harsh weather Versatile Mounting: Works with various LED light sizes and configurations Complete Set: Includes brackets for both driver and passenger sides 📦 Package Includes 2 × Dual A-Pillar Brackets (Driver & Passenger Side) Mounting Hardware ❓ FAQ Q: What size lights can I mount with these brackets? A: These brackets are compatible with most standard LED work lights, fog lights, and spotlights. Check your light's mounting hole pattern before ordering. Q: Do I need to drill any holes? A: No drilling required—these brackets mount to existing windshield hinge locations on JK/JKU models. Q: Will these interfere with my soft top? A: When properly installed, these brackets should not interfere with soft top operation. However, we recommend checking clearance with your specific top configuration. Q: Are these compatible with the JL model? A: No, these are designed specifically for JK/JKU (2007-2017). JL models have different windshield hinge dimensions.

Read more less

Fitment Jeep Wrangler JK 2007-2018 (2-door) Jeep Wrangler JKU 2007-2018 (4-door Unlimited) DR-8 size — matches OE door hinge bolt thread spec Replaces worn, missing, or stripped factory door hinge nuts Key Features OE Thread Match — DR-8 size matches the factory door hinge bolt thread pitch precisely for a drop-in replacement — no modification required Fixes Rattle & Squeak — Replaces loose or missing OE hinge nuts that cause doors to shake, rattle, and create harsh sounds on rough roads Stainless Steel Construction — High-quality stainless with black powder coating provides superior rust and corrosion resistance for years of off-road use Simple Installation — Thread onto the existing door hinge bolts by hand; tighten with a wrench — no special tools needed Frequently Asked QuestionsQ: How do I know if I need new door hinge nuts?A: If your doors rattle when driving, are hard to open or close, or you notice a high-pitched squeak from the hinge area, worn or missing hinge nuts are likely the cause.Q: Can I use these on a Wrangler JL?A: No. These are DR-8 sized specifically for the 2007-2018 Wrangler JK and JKU.Q: Do these come with door bushing removal tools?A: No. This listing is for hinge nuts only. For a complete hinge rebuild, also purchase an iFJF door bushing removal tool and hinge liner pins.

Read more less