Off Road

Product Overview Unlock the true off-road potential of your Jeep Wrangler JK with the iFJF Quicker Disconnect Swaybar Link System. The factory sway bar limits wheel articulation to roughly 6-8 inches — enough for highway stability but a major handicap on rocks. This adjustable quick-disconnect system releases both sway bar links in under 30 seconds (two quick-release pins per side) for up to 30% more wheel travel. When it's time to hit pavement, reconnect just as fast — no tools, no crawling underneath, no alignment reset. Key Features 2-Pin Quick Removal — Pull two stainless steel retaining pins per side to free the sway bar. 30 seconds to disconnect, 30 seconds to reconnect. Adjustable for 2.5"-6" Lifts — Threaded heim joint design provides infinite length adjustment to maintain proper sway bar geometry at any lift height. Replace #2030/#2034 — Direct upgrade replacement for fixed-mount JKS 2030/2034 sway bar disconnects, adding the quick-release feature those systems lack. Greaseable Chromoly Heim Joints — PTFE-lined spherical rod ends with grease zerks. Silent operation, zero-slop articulation, replaceable when worn. Massive Off-Road Flex — Disconnected sway bar allows each axle to move independently, keeping all 4 tires planted on uneven terrain. Compatibility Make Model Years Lift Range Jeep Wrangler JK 2-Door 2007-2018 2.5" - 6" Jeep Wrangler JK Unlimited 2007-2018 2.5" - 6" Specifications Specification Detail Link Material DOM steel tube (powder coated) Joint Type Chromoly heim (greaseable, PTFE-lined) Pin Type Stainless steel quick-release Adjustment 2.5" - 6" lift height SKU JP-FS01-ZH Frequently Asked Questions Q: How fast is disconnect/reconnect?A: ~30 seconds per side. Pull two pins, swing link up, secure with parking strap. Reconnecting is just as fast. Q: Will these rattle on the street?A: Our PTFE-lined heim joints run silent when properly greased. A shot of grease through the zerk fitting quiets any noise instantly. Q: Do I need to disconnect both sides?A: Yes — for maximum articulation, disconnect both sides. Single-side disconnect limits flex and stresses the connected link unevenly. Q: Can I drive highway speeds disconnected?A: NO. Driving at highway speeds with sway bar disconnected is extremely dangerous — excessive body roll and unpredictable handling. Always reconnect before pavement. Q: What maintenance is required?A: Grease heim joint zerks every 3-4 trail trips. Inspect retaining pins annually. Replace heim joints when play develops (typically 2-3 years of heavy use). Related Products Swaybar Quick Disconnect — JK 2007-2018 Steering Stabilizer Bracket — JK 2.5" Series II Lift Kit — JK Related Blog Posts iFJF Guides — Installation & Maintenance Tips Jeep Wrangler Lift Kit Buyer's Guide

Read more less

Product Overview The iFJF Adjustable Front Coil Spacer Kit delivers the most versatile lift solution for TJ, LJ, XJ, ZJ, and MJ owners who need precise ride height control. CNC-machined from solid billet aluminum, this threaded collar system lets you dial in your front lift from zero to 3.75 inches without removing the coil springs. On-vehicle adjustability means fine-tuning ride height for a level stance or compensating for different bumper/winch weights takes minutes — not hours. Key Features Infinitely Adjustable 0-3.75" Lift — Threaded billet aluminum collar design allows micro-adjustments without disassembling suspension. Dial in the exact height you need. No Spring Compressor Required — Unlike traditional spacers, this collar mounts externally and adjusts with basic hand tools. No spring removal, no compressor. CNC Billet Aluminum Construction — Machined from solid 6061-T6 aluminum. Won't deform under heavy load like plastic or rubber spacers. Anti-corrosion, anti-rust. Isolator Pad Included — Integrated polyurethane isolator prevents metal-on-metal contact and eliminates suspension noise. Anti-slip grip ring keeps everything locked. Multi-Platform Coverage — Fits Wrangler TJ (1997-2006), LJ Unlimited (2004-2006), Cherokee XJ (1984-2001), Grand Cherokee ZJ (1993-1998), and Comanche MJ (1986-1992). Compatibility Make Model Years Jeep Wrangler TJ 1997-2006 Jeep Wrangler LJ Unlimited 2004-2006 Jeep Cherokee XJ 1984-2001 Jeep Grand Cherokee ZJ 1993-1998 Jeep Comanche MJ 1986-1992 Specifications Specification Detail Material 6061-T6 Billet Aluminum Adjustment Range 0" - 3.75" (1.5" max recommended with stock arms) Isolator Polyurethane with anti-slip ring Application Front coil springs only SKU FJ-JP-JKS220 Frequently Asked Questions Q: Can I adjust height without removing the springs?A: Yes — that's the core advantage. Loosen set screws, spin the collar, re-torque. No spring compressor needed, no spring removal. Q: What's the max safe lift with stock control arms?A: Stay at 1.5" or below with factory arms. Going higher without adjustable control arms reduces caster and causes wandering steering. For 2-3.75", adjustable arms are strongly recommended. Q: Will this fix my sagging driver-side lean?A: Absolutely. Set the driver side collar slightly higher to compensate for years of single-occupant weight and spring fatigue. Q: Does this work on rear coil springs?A: No — designed for front coil springs only. Rear coil spring diameter and mount design differ on these platforms. Q: Fixed spacer vs adjustable collar — what's the real difference?A: Fixed spacers = one height, spring removal required. Our adjustable collar = infinite height control, on-vehicle adjustment, no spring removal ever. Related Products Swaybar Quick Disconnect — JK 2007-2018 Steering Stabilizer Bracket — JK 2.5" Series II Lift Kit — JK Related Blog Posts iFJF Guides — Installation & Maintenance Tips Jeep Wrangler Lift Kit Buyer's Guide

Read more less

Product Overview Add versatile forward lighting to your Jeep Wrangler JK with these dual A-pillar mounting brackets. Mount LED pods, cube lights, spotlights, or small light bars at the windshield hinge an ideal position for ditch lights, trail lights, or supplemental driving lights. The A-pillar location puts light exactly where you need it: down low and wide to illuminate trail obstacles and roadside hazards. Heavy-duty steel construction with black powder coat finish. Bolt-on installation using factory windshield hinge bolts no drilling required. Sold as a pair (driver and passenger side) with mounting hardware included. Key Features Windshield Hinge Mount Uses factory hinge bolt locations. No drilling, cutting, or permanent modifications. Dual Light Capability Each bracket supports one light pod. Run ditch lights, spot beams, or flood patterns to suit your driving needs. Heavy-Duty Steel Built for off-road vibration and wind load at highway speeds. Black powder coat resists rust. Universal Light Fitment Compatible with most 3-4 inch LED pods and cube lights. Standard mounting bolt pattern. Complete Hardware Kit Includes brackets, bolts, washers, and nuts. Compatible with 2007-2018 JK 2-door and 4-door. Compatibility Year Make Model Notes 2007-2018 Jeep Wrangler JK 2-Door All trims 2007-2018 Jeep Wrangler JKU 4-Door All trims Specifications Spec Value Material Heavy-Gauge Steel Finish Black Powder Coat Mount Location Lower Windshield Hinge Light Compatibility 3-4 inch LED Pods / Cube Lights Quantity Pair (Driver + Passenger) Frequently Asked Questions Q: Will these fit my 2017 Jeep Wrangler JK?A: Yes. These A-pillar brackets mount using factory windshield hinge bolts on 2007-2018 Jeep Wrangler JK (2-door and 4-door). No drilling required. Q: What lights can I mount?A: Designed for LED pods, cube lights, or small light bars. Recommended: 3-4 inch pods or 6-12 inch single-row light bars per side. Q: Will these interfere with folding the windshield?A: The brackets mount to the lower hinge and don't prevent folding. You may need to remove lights before folding depending on size and positioning. Q: Do these come with mounting hardware?A: Yes. Includes brackets, bolts, washers, and nuts. Thread locker recommended for installation. Q: How is the wiring routed?A: Route wiring along the cowl, through the firewall grommet, to your switch panel. Use split loom for protection. Relay harness recommended for lights over 5 amps.

Read more less

Product Overview Door Hinge Nuts for Wrangler JK JKU 2007-2017 (DR-8) — a high-performance aftermarket replacement engineered for precision fitment and lasting durability. Designed specifically for Jeep Wrangler applications with durable materials and easy snap-in or bolt-on installation. Built to withstand off-road abuse, mud, water, and extreme temperatures. Compatibility This product is compatible with the vehicles and engines listed in the product title above. Please verify your specific application before ordering. Contact our support team if you need assistance confirming fitment. Key Features Jeep-specific fitment for Wrangler JK/JKU Durable materials for off-road use Easy no-tool or basic-tool installation Rust and corrosion resistant OEM-spec matching Specifications Specification Value Type Aftermarket Replacement Condition New Includes All hardware shown Installation Guide Disconnect battery and allow engine to cool Remove factory component and clean mounting surfaces Install new gaskets and position the replacement part Torque fasteners to specification in an even pattern Reconnect all connections and check for proper operation Start engine and check for leaks or issues Re-torque after first heat cycle (if applicable) Professional installation recommended. Estimated time: 1-4 hours depending on application. Frequently Asked Questions Q: Is this a direct bolt-on replacement?A: Yes, designed as a direct replacement for the factory component using existing mounting points. No modifications required for standard applications.Q: What is included in the package?A: The kit includes everything needed for installation — the main component, gaskets, mounting hardware, and any required accessories as shown in the product images.Q: Is professional installation required?A: Professional installation is recommended for best results. Some applications may require basic to intermediate mechanical skills and standard hand tools.Q: What warranty is included?A: All iFJF products come with a 3-month hassle-free return and money-back guarantee. If you have any issues, contact our support team.Q: How do I verify fitment for my specific vehicle?A: Check the compatibility information in the product listing, compare your engine code and model year, and contact our support team if you need assistance. Why Choose iFJF? Quality Assurance — Every product is inspected and tested before shipment Complete Kits — All necessary hardware included — no extra parts to buy Expert Support — Our team is available to help with fitment and installation questions 3-Month Warranty — Hassle-free returns and money-back guarantee on all iFJF products Related Products Door Hinge Nuts for Wrangler JK 6 PCS Torx Screws for Wrangler JK Hood Latch Lock for Jeep Wrangler

Read more less

Product Overview Keep your Jeep Wrangler JK's doors secure with these OE-spec replacement door hinge nuts from iFJF. Designed as a direct drop-in replacement for worn, stripped, or missing factory door hinge nuts on 2007–2017 Wrangler JK and JKU models. Manufactured from corrosion-resistant stainless steel with precise DR-8 thread specification to match factory hinge bolts exactly. This 4-piece set provides enough hinge nuts to replace all critical mounting points — restoring proper door operation and eliminating door sag and rattle. Key Features OE-Spec DR-8 Thread — Precisely matches factory door hinge bolts for a direct, trouble-free replacement. No cross-threading, no loose fit. 4-Piece Set — Complete set covers all critical door hinge mounting points. Enough to replace one side or address multiple worn nuts. Stainless Steel Construction — Corrosion-resistant material stands up to rain, mud, road salt, and off-road conditions without rusting or seizing. Exact Fit — Designed specifically for Jeep Wrangler JK and JKU (2007–2017). Not a universal part — guaranteed to fit. Restores Door Alignment — Properly secured hinge nuts eliminate door sag, wind noise, and rattling caused by loose or missing hardware. Quick DIY Install — No special tools required. Threads on by hand and tightens with a standard socket wrench in minutes. Compatibility Year Make Model Notes 2007–2017 Jeep Wrangler JK (2-Door) All trims — Sport, Sahara, Rubicon 2007–2017 Jeep Wrangler JKU (4-Door Unlimited) All trims — Sport, Sahara, Rubicon Specifications Specification Value Material Stainless Steel Thread Specification DR-8 (OE Match) Quantity 4 Pieces Finish Natural Stainless Installation Hand-Thread + Socket Wrench Installation Guide Remove the old/stripped hinge nut with a socket wrench if still attached. Clean the hinge bolt threads with a wire brush if needed. Thread the new stainless steel nut onto the hinge bolt by hand. Tighten firmly with a socket wrench. Do not over-torque. Open and close the door to verify smooth operation and proper alignment. Pro Tip: Apply a small amount of anti-seize compound to the bolt threads for easier future removal if you frequently take your doors off. Why Choose iFJF? Proven Performance — Every iFJF product is engineered for measurable gains in power, efficiency, or durability over factory components. Premium Materials — We use only certified materials — T-304/SS304 stainless steel, 6061-T6 aluminum, IATF 16949-certified filtration media — never cheap substitutes. Perfect Fit Guarantee — Every product is jig-tested or fitment-verified on actual vehicles before release. No guesswork, no modifications required. Fast Support — Fitment questions answered within 24 hours. Full installation guidance available. Fast Free Shipping — Free standard shipping on orders $50+ within the continental US. FAQ Q: Will these fit my 2015 Wrangler JK Unlimited?A: Yes. These nuts are designed for all 2007–2017 Jeep Wrangler JK (2-door) and JKU (4-door Unlimited) models. Exact DR-8 thread match. Q: Are these the same as the factory nuts?A: Yes. Manufactured to the same DR-8 thread specification as the OEM door hinge nuts. Stainless steel offers better corrosion resistance than factory carbon steel. Q: How many do I need for a full set?A: Each door uses 2 hinge nuts (upper and lower hinge). This 4-piece set covers one complete side, or you can buy 2 sets for all 4 doors. Q: Can I install these myself?A: Absolutely. Basic hand tools only — thread on by hand, finish tightening with a socket wrench. Takes less than 5 minutes per nut. Q: Will these rust over time?A: No. Made from stainless steel, these nuts resist rust and corrosion far better than the factory carbon steel hardware — even with frequent door removal and off-road exposure. Related Products Door Bushing Removal Tool for Wrangler JK/JL — Essential companion tool for door maintenance Door Limit Straps for Wrangler CJ/YJ/TJ/JK/JL — Keep your doors from swinging too far Door Hinge Nuts + Bushing Removal Tool Combo for Wrangler JK — Complete door hinge maintenance kit

Read more less

Door Hinge Bushing Rebuild Kit for 2007–2018 Jeep Wrangler JK & JKU — 8-Pack Take your JK door maintenance to the next level with this 8-pack door hinge bushing rebuild kit. Designed for 2007–2018 Jeep Wrangler JK and JKU models, this comprehensive kit provides double the hardware of our standard kit — perfect for owners with multiple JK vehicles, off-road shops, or anyone who wants spare parts on hand. The factory plastic door hinge bushings on JK Wranglers are a known failure point; once they crack or ovalize, you'll experience door sag, wind noise, rattles, and difficulty latching. Each component is made from 304 stainless steel with a black powder coat finish for maximum corrosion resistance. The included precision CNC-machined bushing removal tool lets you safely extract old bushings without damaging your door paint or hinge brackets. Key Features 8-Pack Value Kit — Hardware for 8 doors (16 hinge liner pins + 16 stainless nuts + removal tool). Enough to rebuild two JKU Unlimited Wranglers, or keep spares for your next service Permanently Fixes Door Sag & Rattle — Replaces failure-prone OEM plastic bushings with stainless steel components that maintain precise tolerances under heavy off-road use 304 Stainless Steel — All hardware is black powder-coated 304 stainless; won't rust even in coastal or salted-road environments Safe Removal Tool Included — CNC-machined pressing tool extracts old bushings cleanly; no hammering, prying, or paint damage DIY-Friendly — Complete installation in 30–45 minutes per door with basic hand tools; full-color instructions included Compatibility Year Make Model Doors 2007–2018 Jeep Wrangler JK 2-Door 2007–2018 Jeep Wrangler JKU 4-Door Unlimited Specifications Component Material Quantity Bushing Removal Tool 304 Stainless (CNC) 1 Hinge Liner Pins 304 Stainless (Black Powder Coat) 16 Hinge Nuts 304 Stainless (Black Powder Coat) 16 Why Choose This 8-Pack Kit Factory JK door bushings are made of Delrin plastic that shrinks and cracks with heat cycling. Once failed, your door drops — creating wind noise at highway speeds, body panel misalignment, and that embarrassing "JK clunk" every time you hit a bump. This 8-pack kit gives you enough hardware to rebuild two complete JKUs, making it the smart choice for shops, clubs, or multi-Jeep households. The included removal tool is engineered to last through dozens of bushing replacements — far more durable than cheap generic alternatives. Installation Overview Remove doors with a helper (JK doors: ~55 lbs each) Use the included pressing tool to extract old bushings Press in new stainless liner pins with light grease Install new hinge nuts, torque to 18–22 ft-lbs Re-hang doors, verify alignment, tighten hinge bolts Pro Tip: Mark door positions before removal to ensure each door goes back on its original hinge set for best alignment. Related Products 4-Pack Door Hinge Bushing Kit Door Limiting Straps for JK/JL JK Hood Lock 2007-2017 Frequently Asked Questions Q: Why buy the 8-pack over the 4-pack?A: The 8-pack gives you enough hardware for two complete JKUs (or four JKs) plus spares. Ideal for multi-Jeep households, off-road clubs, or professional shops. The price per door is significantly lower than buying two 4-packs. Q: Will these fit both 2-door and 4-door JK models?A: Yes. The hinge hardware is identical across both JK (2-door) and JKU (4-door Unlimited) models from 2007 to 2018. Q: How do I tell if my bushings are bad?A: Open the door and try to lift it — if there's more than 1/8 inch of vertical play, the bushings are worn. Other signs: wind noise around door seals at highway speed, rattling over bumps, door requires slamming to close fully. Q: Can I install this without removing the doors?A: It's possible but not recommended. Removing the doors gives you proper access to both upper and lower hinge bores and ensures correct alignment. Two-person lift recommended. Q: Is the removal tool reusable?A: Yes. The CNC-machined 304 stainless steel removal tool is built for repeated use across dozens of bushing replacements. Q: What warranty is included?A: 12-month manufacturer defect warranty. Contact support@ifjf.net with your order number for claims.

Read more less

Door Hinge Bushing Rebuild Kit for 2007–2018 Jeep Wrangler JK & JKU (4-Pack) Restore your Wrangler's door operation with this complete hinge bushing rebuild kit. Over time, the factory door hinge bushings on 2007–2018 Jeep Wrangler JK and JKU models wear down, causing sagging doors, annoying rattles, and difficulty closing. This 4-piece kit includes everything you need to replace worn hinge liners and nuts on all four doors of your Wrangler Unlimited — or both doors on a 2-door JK. Each component is crafted from high-grade stainless steel with a durable black powder coat finish, offering superior corrosion resistance against rain, mud, snow, and salt. The included CNC-machined bushing removal tool makes replacing old, seized bushings quick and damage-free — no need to hammer or pry against your door paint. Key Features Complete 4-Door Kit — Includes stainless bushing removal tool, replacement hinge liner pins, and hinge nuts for all 4 doors on Wrangler Unlimited JKU (also fits 2-door JK with spares) Fixes Door Sag & Rattle — Eliminates the common JK door slop, wind noise, and squeaking caused by worn factory plastic bushings Stainless Steel Construction — 304 stainless steel with black powder coating resists rust and corrosion even after years of off-road exposure Precision CNC Machined Tool — Safe, controlled bushing removal without scratching door paint or bending hinge brackets OEM-Spec Fit — Direct drop-in replacement for factory hinge hardware; no drilling or modification required DIY-Friendly Installation — Average install time 30–45 minutes per door with basic hand tools Compatibility Year Make Model Doors 2007–2018 Jeep Wrangler JK 2-Door 2007–2018 Jeep Wrangler JKU 4-Door Unlimited Specifications Component Material Finish Bushing Removal Tool 304 Stainless Steel CNC Machined Hinge Liner Pins 304 Stainless Steel Black Powder Coat Hinge Nuts 304 Stainless Steel Black Powder Coat Quantity 4-Door Kit (8 liners + 8 nuts + 1 tool) Why Choose iFJF Door Hinge Kit Factory Jeep JK door hinge bushings are plastic — they crack, degrade, and ovalize over time. Once the bushing wears, your door drops slightly, causing wind leaks, body panel misalignment, and that signature JK rattle. Our stainless steel kit permanently solves this with precision-machined replacements that won't deform under load. Combined with the included removal tool, this is the most complete JK door hinge solution on the market. Installation Tips Remove doors completely for easiest access to hinges Use the included bushing removal tool to press out old bushings — no hammer required Apply a light coat of white lithium grease to new liner pins before installation Torque hinge nuts to 18–22 ft-lbs Re-hang door and check alignment before final tightening Note: For JK models with significant hinge bracket wear, inspect hinge pin bores for ovalization before installing new bushings. Related Products 8-Pack Door Hinge Bushing Kit Door Limiting Straps for JK/JL JK Hood Lock 2007-2017 Frequently Asked Questions Q: Will this fit my 2015 Jeep Wrangler JK Unlimited?A: Yes. This kit fits all 2007–2018 Jeep Wrangler JK (2-door) and JKU (4-door Unlimited) models regardless of trim level — Sport, Sahara, Rubicon, or special editions. Q: How do I know if my door hinge bushings need replacement?A: Common signs include: doors that sag when opened, require extra force to close, rattle over bumps, or have visible play when you lift the door from the open position. If you can wiggle the door up and down more than 1/8 inch, the bushings are worn. Q: Is the removal tool safe to use on painted surfaces?A: Yes. The CNC-machined tool is designed to press bushings out from the inside of the hinge bore without contacting painted door surfaces. Follow the included instructions and use steady, controlled pressure. Q: Does this come with instructions?A: Yes, a step-by-step installation guide is included. We also have video tutorials available on our website. Q: What's the difference between the 4-pack and 8-pack kits?A: The 4-pack includes hardware for all 4 doors (8 hinge liners + 8 nuts) with one removal tool. The 8-pack doubles the hardware for dual-vehicle owners or spare parts. Q: Do I need to remove the doors to install?A: We strongly recommend removing the doors. While it's possible to work with the doors on hinges, door removal gives you full access and allows proper bushing alignment. Two-person lift recommended — JK doors weigh approximately 55 lbs each. Q: What's your warranty on this kit?A: All iFJF products include a 12-month warranty against manufacturing defects. Contact support@ifjf.net with your order number for warranty claims.

Read more less

Bottle Opener License Plate Delete Cover for 2007-2018 Jeep Wrangler JK / JKU When you relocate your license plate to the spare tire, you're left with an empty, unfinished factory plate mount — and a perfect opportunity for one of the most useful Jeep accessories ever made. This stainless steel license plate delete cover fills the void with a fully functional bottle opener, giving you a conversation-starting tailgate accessory that's ready for trail-side refreshments, camp brews, and parking lot post-ride debriefs. Key Features Functional Bottle Opener: Integrated stainless steel opener pops bottle caps cleanly — tested on hundreds of bottles from craft IPAs to Mexican lagers. No bending, no slipping. 304 Stainless Steel: Polished stainless resists rust, pitting, and corrosion — looks great season after season even through winter road salt and beach sand. Direct Fit Plate Delete: Covers the factory license plate mounting area completely. Uses factory mounting holes — no drilling, no modifications. Clean Aesthetic: Replaces the empty factory plate depression with a sleek, polished cover that ties the rear end together after a relocation mod. Laser-Etched Logo: Subtle iFJF branding looks factory-quality, not like a cheap stick-on decal. Great Gift: The perfect stocking stuffer, Father's Day gift, or trail buddy present for any Jeep Wrangler JK owner. Compatibility Vehicle Years Location Jeep Wrangler JK (2-Door) 2007–2018 Rear bumper factory license plate mount Jeep Wrangler JKU (4-Door) 2007–2018 Rear bumper factory license plate mount Note: Designed for use AFTER relocating your license plate to the spare tire or other location. Covers the empty factory plate area. Standard US plate bolt spacing. Not compatible with Wrangler JL (2018+) or TJ models without modification. Specifications Specification Value Material 304 Stainless Steel Finish Polished Stainless Dimensions Approx. 13" x 4.5" Thickness 14-gauge (2.0mm) Mounting Factory bolt holes (hardware included) Opener Type Integrated pry-style opener Weight 0.6 lbs Why Choose iFJF Most "novelty" Jeep accessories are plastic junk that fades in the sun and breaks on the first use. This iFJF plate delete is machined from 14-gauge 304 stainless steel — the same alloy used in marine hardware — and polished to a mirror finish. The integrated bottle opener is precision-stamped (not a separate riveted piece) so it won't bend or break. It's the rare Jeep accessory that's both useful and built to last. Frequently Asked Questions Q: Do I need to relocate my license plate first?A: Yes. This is a delete cover — it covers the factory plate mounting area after you've moved your license plate elsewhere (typically to a spare tire relocation bracket). Do not cover your license plate; it is illegal to obscure your plate in all 50 states. Q: Does this fit the JL Wrangler (2018+)?A: No. The JL uses a different rear bumper design with different bolt spacing. This cover is designed specifically for the JK (2007-2018) factory rear bumper plate mount. Q: Can I use this without a relocation bracket — just cover my plate?A: No. Covering or obscuring your license plate is illegal in all 50 US states and most countries. This product is intended to fill the factory mount AFTER the plate has been properly relocated. Q: Will this rust over time?A: 304 stainless steel is highly corrosion-resistant. Under normal use (including winter road salt exposure), it will maintain its finish for years. For beach-driven Jeeps, a quick freshwater rinse after exposure to salt spray is recommended. Q: What's included in the box?A: The stainless steel delete cover, stainless mounting screws (2), and nylon washers to prevent metal-on-metal contact with your bumper. Q: Does the opener actually work well?A: Yes — it's a real opener, not just decorative. The integrated pry edge is designed for standard crown bottle caps. It works best with a firm, straight pull (like a wall-mounted opener). Twist-off caps won't work with any pry-style opener. Related Products Rear License Plate Relocation Bracket — Move your plate to the spare tire first Spare Tire Trash Bag — Storage for camping gear 6PCS Torx Screw Bolts for Wrangler JL — Stainless door hardware

Read more less

High-Visibility Fire Extinguisher Mount for Jeep Wrangler JK The iFJF Adjustable Roll Bar Fire Extinguisher Holder in eye-catching red gives you the same rugged functionality as our black version, with the added benefit of high visibility. In an emergency, every second counts — the bright red finish makes your extinguisher instantly visible from any angle. Engineered specifically for the Jeep Wrangler JK (2007–2018) roll bar, this mount features a fully adjustable clamp design with rubber-lined contact surfaces that grip firmly without damaging your roll bar. Key Features High-Visibility Red Finish — Instantly locate your extinguisher in low light or emergency situations Adjustable Roll Bar Fit — Compatible with all Jeep Wrangler JK (2007–2018) 2-door and 4-door roll bars 3lb Fire Extinguisher Capacity — Fits standard 3lb automotive extinguishers (sold separately) Quick-Release Strap — Deploy your extinguisher in under 2 seconds Powder-Coated Steel Construction — Red finish resists rust, corrosion, fading, and chipping No-Drill Installation — Clamp-on design requires zero permanent modifications Rubber-Lined Clamps — Protects roll bar finish and eliminates rattles Vehicle Compatibility Jeep Wrangler JK 2-Door — 2007–2018 Jeep Wrangler JK Unlimited (4-Door) — 2007–2018 Compatible with hard top, soft top, and dual top configurations Fits factory and most aftermarket sport cage / roll bar upgrades Why Red Matters: The Case for Visibility When smoke starts filling the cabin or you smell burning wiring on the trail, you don't want to be searching for a black bracket in a dark footwell. The red powder-coat finish is instantly recognizable — even in low light, dust, or smoke conditions. It meets the standard color convention for fire safety equipment, making it intuitive for passengers or fellow off-roaders to locate and deploy. Trail Safety Checklist A fire extinguisher is just one piece of a complete off-road safety kit. For maximum trail preparedness, consider pairing this mount with: first aid kit (trauma-focused for remote locations), recovery gear (tow strap, shackles, kinetic rope), tire repair kit and air compressor, emergency communication device (satellite messenger or GMRS radio), and extra water and emergency food rations. Frequently Asked Questions Q: Does the red finish fade in the sun?A: No. Our powder-coating process includes UV-stable pigments designed to resist fading even with years of direct sun exposure. Q: Is the red version the same as the black version?A: Yes — identical construction, materials, and fitment. The only difference is the red powder-coat finish for enhanced visibility. Q: Will this hold a 5lb extinguisher?A: No, this mount is specifically designed for 3lb extinguishers. Using a larger extinguisher may result in an insecure fit. Q: Can I install it behind the driver's seat?A: Yes. The 360-degree adjustable clamp lets you position it in any orientation around the roll bar — behind the driver, passenger, or in the cargo area. Q: Does it rattle on rough roads?A: No. The rubber-lined clamps absorb vibration and the quick-release strap keeps the extinguisher firmly seated even on washboard roads and rock gardens. Related Products Complete your build with these complementary iFJF products: iFJF Fire Extinguisher Holder Black — Jeep JK iFJF Door Cable Repair Kit 32 Ends iFJF Jeep 4.0L Exhaust Manifold 1991-2003 Frequently Asked Questions Q: Will this fit my 2007-2018 Wrangler?A: Designed for 2007-2018 Jeep Wrangler Wrangler. Verify your exact year and model (2-door vs 4-door) before ordering. Q: Is installation difficult?A: Most Jeep accessories are designed for DIY installation with basic hand tools. Average install time is 15-45 minutes. Q: What material is this made from?A: Manufactured from high-grade materials including billet aluminum, stainless steel, and UV-resistant polymers selected for off-road durability. Q: Is this compatible with aftermarket modifications?A: Most accessories work with stock and mildly modified Wranglers. For extensive modifications, verify fitment with product dimensions. Q: How does this compare to OEM?A: iFJF aftermarket accessories match or exceed OEM quality at a more accessible price point with rigorous quality control for harsh off-road conditions. Q: What is the warranty?A: All iFJF products come with a 1-year warranty against manufacturing defects. 🔧 Related Products Browse All Jeep Wrangler Parts — Compatible gaskets, hardware & upgrades Exhaust Gaskets & Hardware — Fresh gaskets recommended for every install 📖 Helpful Resources iFJF Installation Guides — Step-by-step tutorials for your vehicle Contact Our Support Team — Expert advice for your setup

Read more less

Trail-Ready Fire Extinguisher Mount for Jeep Wrangler JK The iFJF Adjustable Roll Bar Fire Extinguisher Holder provides a secure, quick-access mounting solution for your Jeep Wrangler JK (2007–2018). Whether you're hitting the trails, overlanding, or just want peace of mind on the road, this mount keeps a 3lb fire extinguisher within arm's reach at all times. Engineered specifically for the JK's roll bar diameter, this holder features a fully adjustable clamp design that grips firmly without scratching or damaging your roll bar's finish. Key Features Adjustable Roll Bar Fit — Compatible with Jeep Wrangler JK (2007–2018) 2-door and 4-door Unlimited roll bars 3lb Fire Extinguisher Capacity — Fits standard 3lb automotive fire extinguishers (extinguisher sold separately) Quick-Release Design — Rapid access in emergencies; no fumbling with straps or buckles Heavy-Duty Powder-Coated Steel — Black finish resists rust, corrosion, and UV damage No-Drill Installation — Clamps directly onto roll bar; no permanent modifications required Rubber-Lined Clamps — Prevents scratching and provides vibration-dampening grip 360-Degree Adjustable Mounting Angle — Position the extinguisher for optimal accessibility Vehicle Compatibility Jeep Wrangler JK — 2007–2018 (2-door and 4-door Unlimited) Fits factory and most aftermarket roll bars Compatible with hard top and soft top configurations Why Carry a Fire Extinguisher Off-Road? Vehicle fires can happen anywhere, but they're especially dangerous on remote trails where emergency services are far away. Common off-road fire hazards include fuel leaks, electrical shorts from aftermarket accessories, overheated brakes igniting dry brush, and catalytic converter contact with tall grass. A properly mounted fire extinguisher gives you critical seconds to respond before a small flame becomes a total loss. Installation Guide Choose your mounting location on the roll bar — driver or passenger side, front or rear Loosen the clamp bolts to open the mounting brackets Position brackets around the roll bar at your desired angle Tighten bolts evenly until the holder is secure — do not overtighten Insert your 3lb fire extinguisher into the cradle and secure the quick-release strap Test that the extinguisher can be removed quickly and easily Frequently Asked Questions Q: Does this come with a fire extinguisher?A: No, this listing is for the mounting bracket only. You'll need a standard 3lb automotive fire extinguisher (sold separately). Q: Will this fit a 4-door JK Unlimited?A: Yes! The roll bar diameter is the same on both 2-door and 4-door (Unlimited) Wrangler JK models from 2007–2018. Q: Can I install this on the driver or passenger side?A: Yes. The mount is fully reversible and 360-degree adjustable — install it wherever provides the quickest access for you. Q: Will this scratch my roll bar?A: No. The clamps feature rubber-lined contact surfaces that protect your roll bar's paint or powder coat finish. Q: Is this legal for on-road use?A: Yes. Carrying a fire extinguisher is legal and recommended in all 50 states. It's also required equipment for many organized off-road events. Related Products Complete your build with these complementary iFJF products: iFJF Fire Extinguisher Holder Red — Jeep JK iFJF Truck Cap Clamps 4-Pack — Chevy/GMC iFJF Jeep 4.0L Exhaust Manifold 1991-2003 Frequently Asked Questions Q: Will this fit my 2007-2018 Wrangler?A: Designed for 2007-2018 Jeep Wrangler Wrangler. Verify your exact year and model (2-door vs 4-door) before ordering. Q: Is installation difficult?A: Most Jeep accessories are designed for DIY installation with basic hand tools. Average install time is 15-45 minutes. Q: What material is this made from?A: Manufactured from high-grade materials including billet aluminum, stainless steel, and UV-resistant polymers selected for off-road durability. Q: Is this compatible with aftermarket modifications?A: Most accessories work with stock and mildly modified Wranglers. For extensive modifications, verify fitment with product dimensions. Q: How does this compare to OEM?A: iFJF aftermarket accessories match or exceed OEM quality at a more accessible price point with rigorous quality control for harsh off-road conditions. Q: What is the warranty?A: All iFJF products come with a 1-year warranty against manufacturing defects. 🔧 Related Products Browse All Jeep Wrangler Parts — Compatible gaskets, hardware & upgrades Exhaust Gaskets & Hardware — Fresh gaskets recommended for every install 📖 Helpful Resources iFJF Installation Guides — Step-by-step tutorials for your vehicle Contact Our Support Team — Expert advice for your setup

Read more less

Product Overview Restore proper headlight alignment with this direct-fit replacement mounting bracket for 2007-2018 Jeep Wrangler JK and JKU. Over time, factory headlight brackets can crack, warp, or loosen especially after front-end impacts, off-road vibration, or headlight upgrades. A loose bracket means your headlight bounces, aims incorrectly, and creates a safety hazard at night. Our replacement bracket is built to handle the demands of off-road driving and heavier aftermarket LED headlights. Direct bolt-on replacement no drilling or modification required. Get your headlights pointing where they should and eliminate that annoying headlight shake. Key Features Direct OEM Replacement Same bolt pattern and dimensions as factory bracket on 2007-2018 Wrangler JK/JKU. Heavy-Duty Construction Built stronger than the OEM bracket to support heavier aftermarket LED headlights without sagging. 7-Inch Round Compatibility Works with factory halogen and aftermarket LED/HID headlights in the standard 7-inch round format. Off-Road Ready Vibration-resistant design handles washboard roads, rock crawling, and rough trail conditions. Bolt-On Install Reuses factory mounting points. No drilling or cutting. 20-30 minute DIY job. Compatibility Year Make Model Notes 2007-2018 Jeep Wrangler JK 2-Door All trims 2007-2018 Jeep Wrangler JKU 4-Door All trims Why Choose iFJF A loose or misaligned headlight is more than annoying it's dangerous. Properly aimed headlights are critical for safe night driving. Our replacement bracket gives you factory-fresh mounting security at a fraction of the OEM price. Built for off-road abuse and heavy LED upgrades. Frequently Asked Questions Q: Will this bracket fit my 2016 Jeep Wrangler JKU?A: Yes. This 7-inch round headlight mount bracket is designed for all 2007-2018 Jeep Wrangler JK and JKU models. Q: Is this different from the retaining ring?A: Yes. The retaining ring clips into the headlight bucket from the front. This mount bracket attaches to the vehicle body for structural support. Both work together. Q: Does this work with LED headlight upgrades?A: Yes. Compatible with both factory halogen and aftermarket LED/HID headlights. The 7-inch round form factor is standard. Q: How do I install this bracket?A: Remove the grille, remove old bracket (3-4 bolts), install new bracket, reattach headlight and grille. 20-30 minutes per side with basic hand tools. Q: Is this sold as a pair?A: This listing is for one bracket. Order quantity 2 for both sides.

Read more less

Product Overview Transform your Jeep's nighttime visibility with these 7-inch round LED headlights. Designed as a direct plug-and-play upgrade for 2007-2018 Wrangler JK/JKU and compatible with TJ, LJ, CJ, YJ, and universal motorcycle applications. The 6000K cool white beam cuts through darkness with 3,000 lumens per light about 3x brighter than stock halogen bulbs. No wiring modifications needed. Includes H4 to H13 adapter for seamless connection to factory JK harnesses. DOT-approved with a sharp cutoff line that won't blind oncoming traffic. Key Features 3,000 Lumens Per Light 200-300% brighter than factory halogen bulbs for dramatically improved nighttime visibility. 6000K Cool White Color Crisp, modern LED light that reduces eye fatigue on long drives and makes obstacles easier to spot. DOT FMVSS-108 Compliant Proper low-beam cutoff pattern for safe on-road use. Won't blind oncoming traffic. Plug-and-Play Installation Includes H4 to H13 adapter. Connects directly to factory wiring no cutting or splicing needed. Durable Construction Aluminum housing with polycarbonate lens. IP67 waterproof rated for all-weather reliability. 50,000+ Hour Lifespan Solid-state LED technology outlasts halogen bulbs by 10x. No filaments to burn out. Compatibility Year Make Model Notes 2007-2018 Jeep Wrangler JK / JKU Direct fit w/ H13 adapter 1997-2006 Jeep Wrangler TJ / LJ Direct fit (H4 connector) 1987-1995 Jeep Wrangler YJ Direct fit 1976-1986 Jeep CJ-5 / CJ-7 / CJ-8 Direct fit Universal Motorcycles / H1 / H2 7 inch round bucket required Specifications Spec Value Size 7-inch Round Light Output 3,000 LM each / 6,000 LM pair Color Temp 6000K Cool White Beam Pattern Low/High Beam (H4 dual-beam) Certification DOT FMVSS-108 Waterproof IP67 Why Choose iFJF Factory halogen headlights on Wranglers are notoriously dim a safety concern for off-road and highway driving alike. Our 7-inch LED headlights deliver 3x the brightness with a clean cutoff pattern that's DOT-compliant. Plug-and-play means you install them in your driveway in under an hour. Backed by our satisfaction guarantee. Frequently Asked Questions Q: Will this fit my 2015 Jeep Wrangler JK?A: Yes. This 7-inch round LED headlight is a direct plug-and-play replacement for 2007-2018 Jeep Wrangler JK and JKU. Includes H4 to H13 adapter for seamless connection. No cutting, splicing, or modifications needed. Installs in under 30 minutes per side. Q: Are these headlights DOT approved?A: Yes. These headlights meet DOT FMVSS-108 standards for on-road use in the US. They produce a proper low-beam cutoff pattern that won't blind oncoming traffic. Q: How much brighter than stock halogen?A: Approximately 200-300% more light output. LED projectors produce 3,000 lumens per light with 6000K cool white. Better visibility on dark trails and highways. Q: Do these work with factory fog lights?A: Yes. These headlights operate independently of your fog lights using the same factory switch and connector. Q: What's the lifespan of these LEDs?A: Rated for 50,000+ hours roughly 10-15 years of typical driving. LED technology eliminates filament burnout.

Read more less

Product Overview Replace your broken or missing Jeep Wrangler JK headlight retaining ring with this direct-fit replacement. These plastic mounting rings are notorious for cracking over time especially when upgrading to heavier LED headlights. A broken ring means your headlight rattles, sits crooked, or falls out of alignment. Our replacement ring features reinforced plastic studs that are more durable than the OEM part. Includes all 3 mounting studs pre-installed. Fits 2007-2018 Wrangler JK and JKU models. Simple 10-15 minute install with basic hand tools. Key Features Direct OEM Replacement Exact fit for 2007-2018 Jeep Wrangler JK and JKU. Same dimensions and mounting pattern as the factory ring. Reinforced Plastic Studs Upgraded stud material resists cracking and breaking better than the factory part. 3 studs pre-installed. Fits Standard 7 Inch Headlights Compatible with both factory halogen and aftermarket LED/HID headlights with 7-inch round form factor. Easy DIY Install Remove grille (6-8 clips), unclip old ring, snap in new one. 10-15 minutes per side. Sold Individually Order quantity 2 if replacing both driver and passenger side rings. Compatibility Year Make Model Notes 2007-2018 Jeep Wrangler JK 2-Door All trims incl. Sport, Sahara, Rubicon 2007-2018 Jeep Wrangler JKU 4-Door All trims Specifications Spec Value Headlight Size 7-inch Round Material Reinforced Plastic Studs 3 Plastic Studs Pre-Installed Quantity 1 Ring (Order 2 for pair) Why Choose iFJF Don't pay dealer prices for a simple plastic ring. Our replacement bracket uses reinforced material that's actually stronger than the OEM part. If you've upgraded to heavier LED headlights, this ring will hold them securely without sagging or cracking. Same fit, better durability, fraction of the dealer price. Frequently Asked Questions Q: Will this fit my 2012 Jeep Wrangler JK?A: Yes. This retaining bracket ring is designed specifically for 2007-2018 Jeep Wrangler JK and JKU. It replaces the factory plastic ring that holds the 7-inch round headlight in place. Q: How many do I need?A: Each headlight requires one retaining ring. This listing is for a SINGLE ring. Order quantity 2 for both sides. Q: Does this include the plastic studs?A: Yes. Each ring comes with 3 integrated plastic studs pre-installed. These are the mounting points that commonly break on the factory ring. Q: Is this compatible with aftermarket LED headlights?A: Yes. The ring works with both factory halogen and aftermarket LED/HID headlights as long as they are standard 7-inch round units. Q: How do I install this?A: Remove the grille (6-8 push clips), disconnect the headlight, unclip the old ring, snap in the new ring, reconnect the headlight, reinstall the grille. 10-15 minutes per side.

Read more less

Product Overview 6 PCS Screw Bolts Refitting Screw Replacement for Wrangler (for JK) — a high-performance aftermarket replacement engineered for precision fitment and lasting durability. Designed specifically for Jeep Wrangler applications with durable materials and easy snap-in or bolt-on installation. Built to withstand off-road abuse, mud, water, and extreme temperatures. Compatibility This product is compatible with the vehicles and engines listed in the product title above. Please verify your specific application before ordering. Contact our support team if you need assistance confirming fitment. Key Features Jeep-specific fitment for Wrangler JK/JKU Durable materials for off-road use Easy no-tool or basic-tool installation Rust and corrosion resistant OEM-spec matching Specifications Specification Value Type Aftermarket Replacement Condition New Includes All hardware shown Installation Guide Disconnect battery and allow engine to cool Remove factory component and clean mounting surfaces Install new gaskets and position the replacement part Torque fasteners to specification in an even pattern Reconnect all connections and check for proper operation Start engine and check for leaks or issues Re-torque after first heat cycle (if applicable) Professional installation recommended. Estimated time: 1-4 hours depending on application. Frequently Asked Questions Q: Is this a direct bolt-on replacement?A: Yes, designed as a direct replacement for the factory component using existing mounting points. No modifications required for standard applications.Q: What is included in the package?A: The kit includes everything needed for installation — the main component, gaskets, mounting hardware, and any required accessories as shown in the product images.Q: Is professional installation required?A: Professional installation is recommended for best results. Some applications may require basic to intermediate mechanical skills and standard hand tools.Q: What warranty is included?A: All iFJF products come with a 3-month hassle-free return and money-back guarantee. If you have any issues, contact our support team.Q: How do I verify fitment for my specific vehicle?A: Check the compatibility information in the product listing, compare your engine code and model year, and contact our support team if you need assistance. Why Choose iFJF? Quality Assurance — Every product is inspected and tested before shipment Complete Kits — All necessary hardware included — no extra parts to buy Expert Support — Our team is available to help with fitment and installation questions 3-Month Warranty — Hassle-free returns and money-back guarantee on all iFJF products Related Products Door Hinge Nuts for Wrangler JK 6 PCS Torx Screws for Wrangler JK Hood Latch Lock for Jeep Wrangler

Read more less

Product Overview Upgrade your Jeep's fog lights with these modified mounting brackets designed specifically for the 2013-2018 Wrangler JK Rubicon X and Hard Rock edition steel bumpers. The factory fog lights on these models are decent, but if you want to run brighter aftermarket LED pods, these brackets make the swap straightforward. Heavy-gauge steel construction with black powder coat finish for corrosion resistance. Bolt-on installation using existing mounting points no cutting or welding required. Sold as a pair (driver and passenger side). Key Features Rubicon X / Hard Rock Specific Designed for the 2013-2018 JK steel bumper with removable end caps. Not for standard plastic bumpers. 4-Inch Light Compatibility Accepts most 4-inch round LED pod and cube lights. Slotted mounting holes allow positioning adjustment. Heavy-Gauge Steel Built to handle off-road vibration and impacts. Black powder coat finish resists rust and corrosion. Bolt-On Install Uses existing bumper mounting points. No cutting, welding, or permanent modifications. Sold as a Pair Includes driver and passenger side brackets with mounting hardware. Compatibility Year Make Model Bumper 2013-2018 Jeep Wrangler JK / JKU Rubicon X / Hard Rock Steel Bumper Specifications Spec Value Light Size 4-inch Round / Pod Material Heavy-Gauge Steel Finish Black Powder Coat Quantity Pair (Left + Right) Frequently Asked Questions Q: Will these fit my 2015 Jeep Wrangler JK Rubicon Hard Rock?A: Yes. These brackets are designed for the 2013-2018 Wrangler JK Rubicon X and Hard Rock edition steel bumpers with removable end caps. Q: What size fog lights do these brackets accept?A: Standard 4-inch round fog lights. Most aftermarket LED pods and cube lights in this size bolt up directly with slotted holes for adjustment. Q: Do I need to modify my bumper?A: No permanent modifications. These brackets bolt to existing mounting points on the steel bumper. You may need to route wiring for aftermarket lights. Q: Are these compatible with factory wiring?A: The brackets are mechanical mounts only. Connect aftermarket lights with an adapter harness or separate relay kit. Q: What material are these brackets made of?A: Heavy-gauge steel with corrosion-resistant black powder coat finish. Built for off-road vibration, water, mud, and salt.

Read more less

Product Overview The iFJF Series II 2.5" Suspension Lift Kit gives your 2007-2018 Jeep Wrangler JK the perfect stance and clearance for up to 35" tires without requiring driveline modifications. This complete bolt-on system includes precision-machined coil spacers, heavy-duty shock extenders, brake line relocation brackets, and all Grade 10.9 hardware. Unlike budget lift kits that compromise suspension geometry, the Series II preserves factory ride quality while delivering the ground clearance and wheel travel you need for serious trail duty. Key Features 2.5" Front & Rear Leveling Lift — Raises both front and rear equally for a balanced stance. Accommodates up to 35" tires on factory wheels with proper backspacing. Complete Bolt-On Kit — No cutting, welding, or permanent modification required. Includes 4 coil spacers, 4 shock extenders, 4 brake line brackets, Grade 10.9 hardware, and full-color installation guide. Preserves Factory Ride Quality — Coil spacer design retains your factory coil springs and shocks, maintaining OEM ride comfort while adding lift height. Shock Extenders Included — Prevents shock topping-out at full droop and maintains proper suspension travel. Essential for off-road articulation and suspension longevity. Brake Line Relocation Brackets — Prevents brake line tension, binding, or snapping during full suspension articulation. DOT-compliant relocation preserves factory ABS sensor routing. Heavy-Duty Polyurethane Construction — Coil spacers machined from high-grade polyurethane composite that resists compression, cracking, and UV degradation far better than rubber alternatives. Compatibility Make Model Years Drivetrain Jeep Wrangler JK 2-Door 2007-2018 2WD & 4WD Jeep Wrangler JK Unlimited 4-Door 2007-2018 2WD & 4WD Note: Does NOT fit Wrangler JL (2018+). Rubicon models with electronic sway bar disconnect may require alternate bracket — contact us for fitment confirmation. Specifications Specification Detail Lift Height 2.5 inches front & rear Spacer Material High-density polyurethane composite Hardware Grade Grade 10.9 metric Max Tire Size 35" on factory wheels (proper backspacing required) Installation Time 4-6 hours professional, 6-8 hours DIY SKU FJ-JP-LK01-CK Installation Notes Lift vehicle and secure on jack stands. Remove wheels. Disconnect sway bar links and brake line brackets from factory mounts. Compress coil springs with spring compressor tool and remove from vehicle. Install coil spacers on top of factory coil spring isolators. Verify seating. Reinstall coil springs and secure. Install shock extenders with supplied hardware. Relocate brake lines using supplied brackets — ensure zero tension at full droop. Torque all hardware to spec. Verify clearance around brake lines and ABS wires. Required: Professional front-end alignment immediately after installation. Why iFJF Series II vs Budget Kits? Budget lift kits ship with rubber spacers that compress over time, stamped steel brackets that rust, and often omit shock extenders — leaving dangerous suspension geometry. The iFJF Series II uses polyurethane spacers that won't sag, powder-coated brackets that resist corrosion, and includes shock extenders as standard. Every component is tested on our own fleet of JK Wranglers before release. Frequently Asked Questions Q: Can I run 35" tires with this 2.5" lift?A: Yes — 35x12.50R17 tires fit with proper wheel backspacing (4.5" or less). Minor plastic trimming of the front air dam may be needed. For 37" tires, step up to a 3.5-4" lift kit. Q: Will I need a transfer case drop or SYE kit?A: At 2.5" of lift on a JK, a transfer case drop or Slip Yoke Eliminator is generally NOT required. Driveline angles remain within factory spec. If you notice vibrations after installation, check pinion angle first. Q: Does this work with factory Rubicon shocks?A: Yes — the shock extenders are compatible with both standard and Rubicon-spec shocks. However, Rubicon models with the electronic sway bar disconnect (EDISCO) may need an extended sway bar link kit. Q: How does ride quality compare to a full coil spring lift?A: Because you retain factory coil springs and shocks, ride quality stays nearly identical to stock. Full coil spring lifts often ride stiffer — the spacer lift preserves factory-tuned spring rates, which is an advantage for daily-driven Jeeps. Q: Is professional installation recommended?A: If you're comfortable with hand tools and have a spring compressor, this is DIY-friendly. We provide detailed torque specs. However, the post-installation alignment must be done at a shop with proper equipment. Related Products Swaybar Quick Disconnect — JK 2007-2018 Steering Stabilizer Bracket — JK 2.5" Series II Lift Kit — JK Related Blog Posts iFJF Guides — Installation & Maintenance Tips Jeep Wrangler Lift Kit Buyer's Guide

Read more less

Windshield Washer Fluid Reservoir Cap for Jeep Wrangler JK, JL & Gladiator JT Replace your missing, cracked, or loose-fitting windshield washer fluid reservoir cap with this direct OEM replacement. Fits 2007-2018 Jeep Wrangler JK/JKU, 2018-2023 Jeep Wrangler JL/JLU, and 2020-2023 Jeep Gladiator JT models. A proper seal on your washer reservoir prevents fluid evaporation, keeps debris out of the system, and ensures your washer pump operates at full pressure when you need it most — whether clearing mud from a trail run or salt spray from winter driving. Key Features Direct OEM Replacement: Manufactured to match the original factory cap dimensions exactly — same snap-fit retention, same vent design, same sealing performance Secure Snap-Fit Design: Audible click confirms proper installation — won't vibrate loose on rough trails or at highway speeds UV-Resistant Polypropylene: Durable plastic construction resists cracking, fading, and warping from engine bay heat and direct sun exposure Proper Venting: Integrated vent prevents vacuum lock in the reservoir while keeping dirt, dust, and moisture out Universal JK/JL/JT Fit: One cap fits all 2007-2023 Jeep Wrangler and 2020-2023 Gladiator models — no need to worry about model year variations Compatibility Year Range Make Model 2007-2018 Jeep Wrangler JK / JKU 2018-2023 Jeep Wrangler JL / JLU 2020-2023 Jeep Gladiator JT Why Replace Your Washer Cap? A missing or broken washer fluid cap seems minor — until you're on the highway with a salt-covered windshield or on a dusty trail with zero visibility. An unsealed reservoir allows washer fluid to evaporate, dirt to contaminate the system, and can cause the washer pump to lose prime. This affordable replacement prevents those problems and takes 5 seconds to install. Frequently Asked Questions Q: Will this fit my 2015 JK Unlimited?A: Yes, this cap fits all 2007-2018 Wrangler JK and JKU models. The washer fluid reservoir cap design was unchanged throughout the entire JK production run. Q: Is this an exact OEM match?A: Yes, this cap matches the OEM Mopar part (55077249AB) in dimensions, material, and fit. It snaps securely and seals properly — indistinguishable from the original. Q: Does it fit the rear window washer reservoir?A: No, this is for the front windshield washer reservoir only. The JK rear washer reservoir (if equipped) uses a different cap design located in the rear cargo area. Q: Will this cap crack in cold weather?A: The polypropylene material is rated for temperatures from -40°F to 240°F, making it suitable for extreme cold climates without becoming brittle. It also withstands the engine bay heat of desert off-road driving. 📚 Related Guides & Articles Jeep Wrangler JK vs JL Parts Compatibility Guide Top 10 Jeep Wrangler Mods Under $50 Jeep Wrangler JK Common Problems & Fixes

Read more less

Keep Your Best Friend Safe on Every Adventure The iFJF Vehicle Rear Seat Isolation Barrier Net is the must-have accessory for Jeep Wrangler owners who travel with their dogs. This heavy-duty pet divider creates a secure barrier between the cargo area and passenger cabin, protecting both your pet and your Wrangler's interior. Key Features Universal JK JL Fitment: Precisely designed for 2007-2021 Jeep Wrangler JK and JL Unlimited 4-door models. Compatible with both hardtop and soft top. Heavy-Duty Nylon Mesh: Durable, tear-resistant netting withstands even energetic dogs. Breathable material ensures proper airflow and visibility. Quick & Easy Installation: No drilling required. Attaches securely to factory grab handles, roll bar, and rear seat mounts with adjustable straps and heavy-duty buckles in under 10 minutes. Full-Width Coverage: Floor-to-ceiling barrier blocks access to the front cabin while allowing full use of cargo space. Safety Certified: Crash-test tested under simulated frontal collision at 30 mph. Contains dogs up to 80 lbs during emergency braking. Compatibility Make Model Year Range Trim Jeep Wrangler JK 2007-2018 Unlimited 4-Door Jeep Wrangler JL 2018-2021 Unlimited 4-Door Why Choose iFJF Pet Barrier? ✅ Distraction-Free Driving: Prevents your dog from jumping into the front seat — a major safety hazard on and off-road. ✅ Interior Protection: Keeps muddy paws, shedding fur, and slobber confined to the cargo area. ✅ Off-Road Ready: Extra-secure mounting stays in place during intense trail crawling and rough terrain. ✅ Lifetime Warranty: Backed by iFJF's satisfaction guarantee. Specifications Spec Detail Material Heavy-Duty Nylon Mesh Installation No-drill, tool-free, <10 min Fitment 2007-2021 Wrangler JK/JL Unlimited Frequently Asked Questions Q: Will this fit a 2-door Wrangler?A: This barrier is optimized for 4-door Unlimited models (JKU/JLU). It may fit 2-door models with some adjustment. Q: Can I use this with a soft top?A: Yes. Mounting points attach to the roll bar structure, identical on hardtop and soft top Wranglers. Q: How does the mesh hold up against chewing?A: The nylon mesh is tear-resistant but not chew-proof. For aggressive chewers, pair with a crate. Q: Will this fit my 2020 JL with factory subwoofer?A: Yes. The barrier mounts above cargo floor level and doesn't interfere with the factory subwoofer. Q: Is this crash-tested?A: Tested under simulated frontal collision at 30 mph. Designed for medium-to-large dogs up to 80 lbs. Q: Can I leave it installed permanently?A: Absolutely. Breathable mesh doesn't obstruct visibility. Many owners keep it as a cargo divider. 📚 Related Guides & Articles 📖 Best Jeep Wrangler JK/JL Accessories for Pet Owners

Read more less

Tailgate Hinge CB Antenna & Flag Mounting Bracket for Jeep Wrangler JL JLU 2018-2021 This dual-purpose tailgate hinge mount gives you a solid, no-drill mounting point for both a CB antenna AND an off-road flag on your 2018-2021 Jeep Wrangler JL or JLU. The two-in-one design eliminates the need for separate mounts and keeps both accessories securely attached through the roughest trails. The bracket sandwiches between the factory tailgate hinge and body — no drilling, no cutting, fully reversible. Ideal for overland rigs, trail convoys, and dune-running where a whip flag is required. Key Features Two-in-One Design: Separate mounting holes for a CB/ham antenna (3/8 inch x 24 thread) AND an off-road flag/whip (1/2 inch hole) — run both simultaneously from one bracket No-Drill Installation: Mounts using the factory tailgate hinge bolts — simply remove the existing bolts, position the bracket, and reinstall with the included longer stainless hardware Heavy-Duty Stainless Steel: 3/16 inch thick 304 stainless steel with black powder coat finish — won't rust, won't flex, built for years of trail abuse Optimal Tailgate Location: Rear-corner mounting provides excellent ground plane for antenna performance and high visibility for off-road flags Complete Hardware Kit: Includes bracket, all mounting bolts, washers, nylon lock nuts, antenna stud adapter, and detailed installation guide Compatibility Year Make Model Notes 2018-2021 Jeep Wrangler JL (2-Door) Driver or passenger side tailgate hinge 2018-2021 Jeep Wrangler JLU (4-Door) Driver or passenger side tailgate hinge Not compatible with: JK models (2007-2018) — different hinge bolt pattern. Gladiator JT — different tailgate hinge design. Why This Mount? When you're running dunes or leading a trail convoy, you need both communication and visibility. This bracket solves both needs from a single mounting point. The tailgate hinge location is one of the strongest structural points on the JL body, and the no-drill design preserves your Jeep's integrity. Plus, having the antenna at the rear corner maximizes ground plane — a key factor in CB radio performance that many fender mounts compromise. Frequently Asked Questions Q: Will this fit a 2019 JLU Sahara?A: Yes, this mount fits all 2018-2021 Wrangler JL and JLU models regardless of trim level. The tailgate hinge bolt pattern is identical across the JL platform. Q: Can I mount it on either side of the tailgate?A: Yes, the bracket is designed to mount on either the driver or passenger side tailgate hinge. Most users prefer the passenger side to keep the antenna away from the fuel filler area. Q: Does the antenna interfere with opening the tailgate?A: The bracket moves with the tailgate when opened, so there's no interference. For very tall antennas (5+ feet), the antenna will swing with the tailgate — folding or quick-disconnect adapters are recommended for daily use. Q: Can I use this with oversized tires on the tailgate?A: The bracket mounts to the hinge, not the tailgate itself. It clears most tailgate-mounted spare tires up to 37 inches. For 40+ inch tires, verify clearance before ordering. Q: Does this work with aftermarket tailgate reinforcement kits?A: Most reinforcement kits that use the factory hinge bolts are compatible. If your reinforcement kit replaces the hinge bolts with its own hardware, you may need longer bolts (available at any hardware store) — contact us for bolt specs. 📚 Related Guides & Articles Jeep Wrangler JK vs JL Parts Compatibility Guide Top 10 Jeep Wrangler Mods Under $50 Jeep Wrangler JK Common Problems & Fixes

Read more less

Product Overview Take the sting out of summer drives with this premium mesh sunshade for your 2018-2022 Jeep Wrangler JL or JLU. The tightly-woven mesh blocks harsh UV rays while allowing the open-air experience that makes Wrangler ownership special. Unlike sunshades that flap in the wind or need removal every time you put the top on, ours stays taut and stays put. The bungee attachment system keeps the shade tensioned properly as your Jeep's body flexes on trails and over bumps. No sagging, no flapping, no torn mounting points. Works with hard top, soft top, and Freedom panels install once and forget about it. Key Features Premium Mesh Fabric Blocks UV rays while allowing airflow. Keeps cabin cooler on hot days without trapping heat. Wind Buffeting Reduction Breaks up turbulent air that causes the dreaded Wrangler wind thump at highway speeds. Permanent Installation Stays in place under hard top, soft top, and Freedom panels. No seasonal removal needed. Bungee Tension System Self-adjusting tension that compensates for body flex and fabric stretch. No sagging over time. All JL Trims Fits 2-door JL and 4-door JLU in Sport, Sport S, Sahara, and Rubicon configurations. Compatibility Year Make Model Doors 2018-2022 Jeep Wrangler JL 2-Door 2018-2022 Jeep Wrangler JLU 4-Door Unlimited Specifications Spec Value Material High-Density Mesh Attachment Bungee Cord System Top Compatible Hard Top, Soft Top, Freedom Panels Frequently Asked Questions Q: What's the difference between this and the other JL sunshade?A: Both fit 2018-2022 JL/JLU. Same premium mesh and bungee system. Design and coverage pattern may vary slightly choose based on preferred look and color. Q: Will the sunshade sag over time?A: No. The bungee system maintains constant tension, automatically compensating for fabric stretch and body flex. Stays taut for years. Q: Can I take the freedom panels off with the shade installed?A: Yes. Remove and reinstall Freedom panels without touching the sunshade. It stays in place. Q: Does this work with aftermarket roll cages?A: Depends on cage design. Mounts to factory roll bar and windshield points. If your aftermarket cage uses same locations, it should work.

Read more less

Product Overview Enjoy open-air Jeep driving without the sunburn. This premium mesh sunshade top for 2018-2022 Jeep Wrangler JL and JLU blocks harsh UV rays, reduces wind buffeting, and keeps your interior cooler all while preserving that top-down freedom you bought a Wrangler for. Unlike cheap sunshades that sag, flap, and need to be removed every time you put the hard top back on, this shade is designed to stay in place year-round. The bungee attachment system holds it taut and allows the fabric to flex with the Jeep's body. Works with all factory tops and all JL trims including Sahara, Rubicon, Sport, and Sport S. Key Features Year-Round Installation Stays in place under your hard top or soft top. No need to remove and reinstall with the seasons. UV Protection (80-90%) Tightly-woven mesh blocks the majority of harmful UV rays. Keeps the cabin cooler and protects your interior from sun damage. Wind Noise Reduction Mesh fabric breaks up turbulent airflow that causes buffeting in open-top driving. More comfortable highway cruising. Bungee Attachment System Quick install in 10-15 minutes. Bungees flex with body movement no sagging, no flapping, no torn mounting points. All-Trim Compatible Fits JL 2-door and JLU 4-door in Sahara, Rubicon, Sport, and Sport S configurations. Compatibility Year Make Model Doors 2018-2022 Jeep Wrangler JL 2-Door 2018-2022 Jeep Wrangler JLU 4-Door Unlimited Specifications Spec Value Material High-Density Mesh Fabric UV Block Rate ~80-90% Attachment Bungee Cord System Top Compatibility Hard Top & Soft Top Frequently Asked Questions Q: Will this sunshade fit my 2021 Jeep Wrangler JL Unlimited?A: Yes. This mesh sunshade is designed for 2018-2022 JL (2-door) and JLU (4-door) including all trims. It fits under both hard and soft tops. Q: Can I leave this installed with the hard top on?A: Yes. The low-profile design clears all factory top mounting points. No need to remove and reinstall seasonally. Q: Does this actually reduce wind noise?A: Yes. The mesh breaks up turbulent airflow causing wind buffeting. Most users report noticeable reduction in buffeting and more comfortable open-air driving. Q: How much UV protection does it provide?A: The tightly-woven mesh blocks approximately 80-90% of UV rays. Keeps the cabin cooler and protects your interior from sun damage. Q: How do I install the sunshade?A: Bungee cord system with anchor points around the roll bar and windshield frame. 10-15 minutes, no tools required. Bungees allow flex without tearing.

Read more less

Red Sport-Style Jeep Wrangler Roof Cargo Net — Sunshade & Storage 2-in-1 Give your Jeep Wrangler a bold, functional upgrade with the iFJF Red Roof Hammock Cargo Net. This vibrant red mesh stretches across the interior roof, creating a versatile overhead storage zone while adding a sporty custom look. Whether you're hauling trail gear, stashing jackets, or keeping valuables out of sight, this roof net keeps everything secured and accessible. The aggressive red colorway stands out against your interior, letting your Wrangler's personality shine through. Key Features Striking Red Design: Vivid red mesh fabric delivers a head-turning sport aesthetic that complements any Jeep Wrangler interior. The bold color is easy to spot and adds instant personality to your cabin. High-Elasticity Premium Mesh: Constructed from high-tensile elastic netting that expands to hold gear snugly. The 4-way stretch fabric conforms to your cargo, preventing shifting and rattling even on rough trails. Full Jeep Wrangler Compatibility: Engineered to fit YJ (1987-1995), TJ/LJ (1997-2006), JK/JKU (2007-2018), JL/JLU (2018-present), and Gladiator JT (2020-present) — both 2-door and 4-door models. Quick 5-Minute Installation: No drilling, no tools required. Simply attach the adjustable straps to your roll bars or roof frame poles. Strong suction cup anchors keep the net firmly in place without damaging your interior. Off-Road & Overlanding Essential: Keeps jackets, blankets, first-aid kits, tow straps, and trail snacks within arm's reach. Frees up floor space and keeps the cabin organized on long adventures. Theft-Deterrent Overhead Storage: Stash sunglasses, wallets, phones, and other small valuables overhead — out of sight from prying eyes when parked with the top off. Compatibility Model Years Body Style Wrangler YJ 1987–1995 2-Door Wrangler TJ / LJ 1997–2006 2-Door / 4-Door (LJ Unlimited) Wrangler JK / JKU 2007–2018 2-Door / 4-Door Wrangler JL / JLU 2018–Present 2-Door / 4-Door Gladiator JT 2020–Present 4-Door Pickup Specifications Material: High-elasticity polyester mesh with reinforced binding Color: Red Weight Capacity: Up to 220 lbs (evenly distributed) Installation: Straps + suction cup anchor system SKU: FJ-JP-NET08-RD Frequently Asked Questions Q: Will this fit my 4-door JKU with a hardtop? A: Yes! The roof cargo net mounts to your interior roll bars, so it works perfectly with both hardtop and soft top configurations. The mesh sits below the roof line and won't interfere with your top. Q: Can I use this as both a hammock and a cargo net at the same time? A: While primarily designed as a cargo net for gear storage, the elastic mesh provides a comfortable resting surface when parked. Many Wrangler owners use it to lounge and stargaze after hitting camp — just make sure the net is properly secured before putting weight on it. Q: Does it block rearview mirror visibility? A: No. The net sits above the windshield line and behind the front seats, so your rearview mirror visibility remains unaffected. It's designed to occupy the rear passenger roof area. Q: Will the suction cups hold on rough off-road trails? A: Yes. The suction cups are industrial-grade and paired with adjustable nylon straps. When properly tensioned, they handle washboard roads, rock crawling, and highway speeds without slipping. Q: Is the red color UV-resistant? A: The polyester mesh is treated with UV inhibitors to resist fading. With a top on, it's shielded from direct sunlight. If you run topless regularly, we recommend occasional treatment with a UV protectant spray to keep the red vibrant for years.

Read more less

Product Overview The iFJF Rear Door Window Decals Aluminum Alloy Glass Panel Cover for 2018-2023 Wrangler JLU Gladiator JT （Porous） from iFJF is a precision-engineered aftermarket upgrade designed to deliver exceptional performance, durability, and value. Manufactured from high-quality aluminum alloy with a durable finish, this exterior accessory adds a custom, aggressive look while providing added protection. Engineered for precise fitment, it installs easily with no permanent modifications required. Vehicle Compatibility This product is designed for the following vehicles: Please verify compatibility with your specific vehicle year, make, model, and engine configuration before purchasing. Contact our support team if you need assistance confirming fitment for your application. Note: Professional installation is recommended. Verify fitment for your specific sub-model, cab configuration, and drivetrain (2WD/4WD) before ordering. Key Features Premium Aluminum Alloy: Lightweight yet durable with corrosion-resistant finish Custom Look: Adds aggressive off-road styling while maintaining functionality 3M Automotive-Grade Adhesive: Strong, weatherproof bond that holds up to car washes and extreme temperatures Easy Peel-and-Stick Installation: No tools required — installs in minutes Technical Specifications Specification Details Material High-quality aluminum alloy construction for durability and corrosion resistance Porous Design: Allows airflow and maintains partial visibility while adding privacy Custom Fit: Laser-cut for precise fit on Wrangler JLU and Gladiator JT rear door windows Easy Installation: Adhesive backing for secure, bubble-free application UV Resistant: Weather-resistant finish prevents fading Compatibility Jeep Wrangler JLU Unlimited (2018-2023) - 4 Door models Jeep Gladiator JT (2020-2023) Installation Guide Clean rear door window thoroughly with alcohol or glass cleaner Dry completely before application Peel adhesive backing and align carefully Apply from center outward to avoid bubbles Press firmly to ensure secure adhesion Package Includes 2 × Rear Door Window Decals (Left + Right) FAQ Q: Will these affect my ability to see out the window? A: The porous design maintains visibility while adding style and privacy. Q: Can I remove them later? A: Yes, they can be carefully removed with heat (hair dryer) and adhesive remover if needed. Q: Do they fit aftermarket tinted windows? A: Yes, they adhere to glass surfaces including tinted windows. Brand iFJF Condition New Warranty Contact iFJF Support for warranty details Installation Guide Preparation: Gather all required tools. Review the complete installation procedure before beginning. Safety First: Disconnect the battery. Ensure the vehicle is properly supported on jack stands if under-vehicle access is required. Remove Old Component: Carefully remove the factory or existing aftermarket part, keeping all hardware organized. Clean & Inspect: Clean all mating surfaces. Inspect related components for wear or damage. Install New Component: Position the iFJF part, hand-start all fasteners, then tighten to specification in the correct sequence. Final Check: Double-check all connections. Reconnect battery, start engine, verify proper operation. Recommended: Professional installation is always recommended for optimal results. Installation time varies by vehicle and experience level — typically 1-3 hours. Frequently Asked Questions Q: Does this come with installation hardware? A: Yes. The kit includes all necessary gaskets, bolts, nuts, and mounting hardware required for a complete installation. Q: Is professional tuning required after installation? A: For most applications, no tuning is required for basic operation. Contact our support team for vehicle-specific recommendations. Q: What is the warranty on this product? A: iFJF stands behind all products with comprehensive warranty coverage. Please contact our customer service team for specific warranty terms and conditions applicable to this product. Q: How long does shipping take? A: Most orders ship within 1-2 business days. Delivery times depend on your location and selected shipping method. You'll receive tracking information as soon as your order ships. Why Choose iFJF? Quality You Can Trust: Every iFJF product is manufactured to rigorous quality standards using premium materials and advanced production techniques. We don't cut corners — we engineer parts that perform and last. Direct-Fit Engineering: Our products are designed using precision CAD/CAM technology and verified against OEM specifications, ensuring a hassle-free installation that fits right the first time. Performance Proven: From daily drivers to track machines, iFJF parts deliver measurable improvements in horsepower, torque, throttle response, and overall driving experience. Exceptional Value: We offer premium-quality parts at competitive prices, giving you the best performance-per-dollar in the aftermarket industry. Dedicated Support: Our knowledgeable team is here to help — before, during, and after your purchase. Questions about fitment, installation, or performance? We've got answers. Fast, Reliable Shipping: We process and ship orders quickly from our US warehouses, so you spend less time waiting and more time enjoying your upgraded vehicle. Related Products Complete your build with these complementary iFJF products: LED Light Bar Mounting Brackets — Add auxiliary lighting for off-road adventures Door Sill Protectors — Guard your entry points against scratches and scuffs Hood Latches — Upgrade to heavy-duty locking hood latches for added security

Read more less