Description
Product Overview
This 830463P awning rafter rivet is a direct replacement for worn, broken, or missing rivets on Dometic A&E 8500 and A&E 9000 RV awning systems. The rafter rivet is the critical pivot point where the support arm (rafter) connects to the awning roller tube — when it fails, your awning sags, binds, or won't retract properly. Our rivet is precision-machined from steel-aluminum composite for strength without rust, giving you a permanent fix that won't strip or corrode like generic hardware-store rivets.
Key Features
-
Exact OEM Fit — Designed specifically for Dometic A&E 8500 and A&E 9000 awning systems. No modifications, no guesswork.
-
Steel-Aluminum Construction — Combines the tensile strength of steel with the corrosion resistance of aluminum. Won't rust, won't snap under tension.
-
Thick Mandrel Design — Engineered with an oversized mandrel that fills the full diameter of the rafter and roller tube holes, eliminating slop and play.
-
DIY-Friendly Installation — Requires only basic hand tools. Align, insert, compress — most RV owners complete the job in under 15 minutes per rivet.
-
Includes 2-Pack — Enough to replace both left and right rafter rivets, or keep a spare in your RV toolkit.
Compatibility
| Awning Series |
Brand |
Part Location |
| A&E 8500 |
Dometic |
Rafter-to-roller tube pivot |
| A&E 9000 |
Dometic |
Rafter-to-roller tube pivot |
| Sunchaser |
Dometic (A&E) |
Check rafter style before ordering |
Not compatible with Carefree of Colorado, Lippert Solera, or Fiamma awning systems. Please verify your awning model before ordering. The A&E model number is typically printed on a label inside the awning roller tube or on the hardware arm.
Specifications
| Specification |
Value |
| Part Number |
830463P |
| Material |
Steel-Aluminum Composite |
| Finish |
Zinc-Plated (Corrosion Resistant) |
| Package Quantity |
2 Rivets |
| Compatible Brands |
Dometic / A&E |
| SKU |
FJ-HL02-SI |
Why Choose iFJF?
Most RV owners grab a generic rivet from the hardware store when their awning rafter fails — only to have it shear off again a few trips later. Our 830463P is built to OEM specifications with a thicker mandrel and zinc-plated finish that stands up to road vibration, wind gusts, and outdoor exposure. Proudly backed by iFJF's quality guarantee. If it doesn't fit or perform as expected, we'll make it right.
Frequently Asked Questions
Q: Will this fit my A&E 8500 awning?
A: Yes. The 830463P rafter rivet is a direct fit for both Dometic A&E 8500 and A&E 9000 manual awning systems. It replaces the pivot rivet where the rafter arm connects to the roller tube on either the left or right side.
Q: How do I know if my rafter rivet is bad?
A: Common signs include: the awning roller tube wobbles or shakes when extending/retracting, the fabric doesn't roll evenly, you hear grinding or popping when operating the awning, or you can see visible play/gap at the rafter-to-roller connection. If left unfixed, a worn rivet can cause the awning to jam or collapse.
Q: Can I install this myself or do I need a professional?
A: Most RV owners can replace the rafter rivet themselves. You'll need a rivet gun (standard manual rivet tool), a drill with a 3/16" bit to remove the old rivet, and basic hand tools. Installation takes about 10-15 minutes per side. We recommend having a helper support the awning roller tube during the swap.
Q: Is this an OEM Dometic part?
A: This is a high-quality aftermarket replacement manufactured to match or exceed OEM 830463P specifications. It is not a genuine Dometic-branded part. The fit, dimensions, and material strength are engineered to perform identically to the original.
Q: What's the difference between this rivet and a hardware store rivet?
A: Standard pop rivets from hardware stores use thin aluminum shanks that can't handle the shear load and vibration of an RV awning. Our 830463P uses a steel-aluminum composite with an oversized mandrel — it's specifically engineered for the constant tension, wind load, and road vibration that awning hardware endures.
Q: How many rivets do I need?
A: Each A&E awning uses 2 rafter rivets (one per side, left and right). This kit includes 2 rivets — enough to replace both sides or keep one as a spare. If only one side has failed, we still recommend replacing both at the same time for even wear.
Q: Do you offer a warranty?
A: Yes, all iFJF products include a 90-day warranty against manufacturing defects. If your rivet fails under normal use, contact us with your order number and we'll send a replacement free of charge.
