Description
Fix Your Refrigerator LED Lights — Simple Driver Replacement
Are your refrigerator lights dimming, flickering, or not working at all? The LED driver module is the most common failure point in modern Whirlpool, KitchenAid, Maytag, and Amana refrigerators. Our W10515057 replacement LED light driver restores full brightness to your fridge and freezer lights in minutes — no tools, no wiring, just plug and play.
Symptoms of a Failed LED Driver
-
Lights won't turn on — Most common symptom of driver failure
-
Flickering or pulsing — Driver can't maintain stable voltage to LEDs
-
Dim lighting — LEDs are working but at reduced brightness
-
Intermittent operation — Lights work sometimes, then go dark
-
One section dark — Side lights work but main light doesn't (or vice versa)
Compatibility — Fits These Brands
| Brand |
Models |
| Whirlpool |
Side-by-side, French door, and bottom-freezer refrigerators with LED lighting (2010-2020) |
| KitchenAid |
Side-by-side and French door models with LED interior lighting |
| Maytag |
Side-by-side and French door refrigerators with LED lighting |
| Amana |
Select side-by-side refrigerator models with LED lights |
| JennAir |
Built-in and freestanding refrigerators with LED interior lighting |
Replaces Part Numbers: W10515057, W10398007, PS11755866, AP6022533, W10515058
Specifications
| Specification |
Detail |
| Type |
LED constant-current driver module |
| Input |
120V AC from refrigerator main board |
| Output |
Constant DC current for LED arrays |
| Connector |
Plug-and-play OEM-style connector — no cutting or soldering |
| Installation |
5-10 minutes — completely tool-free on most models |
Installation — No Tools Needed
-
Unplug the refrigerator or turn off the circuit breaker
-
Locate the LED driver — usually behind the light panel at the top of the fresh food section or behind the control panel
-
Disconnect the old driver — unplug the wire connectors (note their positions)
-
Connect the new driver — plug the connectors into the matching ports
-
Restore power and test — lights should illuminate at full brightness
Why Choose iFJF?
-
Exact replacement — Same form factor, connectors, and output as the OEM W10515057
-
Plug-and-play — No cutting, splicing, or soldering required
-
Restores full brightness — Eliminates dim, flickering, or completely dark lights
-
Tested output — Each driver is tested for stable LED current output
-
Fast fix — Have your fridge lights working again in 10 minutes
Frequently Asked Questions
Q: How do I know if I need the driver or the LED boards themselves?
A: If ALL lights are dim or not working, it's almost always the driver. If only one specific LED is out while others work, that individual LED board may be the issue. The driver is the most common failure point.
Q: Does this replace W10515058 as well?
A: W10515058 is the main light driver, while W10515057 typically drives the side lights. Some refrigerators use one or both. Check your refrigerator's parts diagram to confirm which driver(s) you need.
Q: Is this an OEM Whirlpool part?
A: This is an OEM-quality aftermarket replacement that meets or exceeds the specifications of the original W10515057 driver. It provides identical performance at a lower price.
Q: Will this work with my KitchenAid French door refrigerator?
A: Yes, if your KitchenAid refrigerator uses the W10515057 or W10398007 driver module. Most KitchenAid French door and side-by-side models from 2010-2020 with LED lighting use this driver.
Q: My fridge lights are completely dead — will this fix it?
A: In most cases, yes. The LED driver is the #1 cause of completely dead refrigerator lights. If replacing the driver doesn't fix the issue, the main control board may have failed — but that's much less common.
