Filter

Fuel Return Line Connector for 2017-2020 Ford 6.7L Powerstroke — HC3Z-9A564-A The fuel filter return line connector (HC3Z-9A564-A) is the most common failure point on 2017–2020 Ford 6.7L Powerstroke fuel systems. This quick-disconnect fitting on the driver-side fuel filter housing becomes brittle over time and snaps during filter changes — leaving you stranded. This is a direct OEM-spec replacement that restores full fuel system integrity. Key Features Direct OEM Replacement — Matches Ford part HC3Z-9A564-A / FD-4625 specifications exactly Durable ABS Plastic — Heat and chemical-resistant construction for under-hood durability Quick-Disconnect Design — Tool-free installation; snaps securely into fuel filter housing Complete Kit — Includes connector, O-ring, and retaining clip Critical Spare — Keep one in your glovebox for emergency filter changes Compatibility Year Make Model Engine 2017-2020 Ford F-250 / F-350 / F-450 / F-550 Super Duty 6.7L Powerstroke V8 Installation Tips 1. Remove old connector by pressing the release tab and pulling firmly2. Lubricate the new O-ring with clean diesel fuel3. Press the new connector onto the filter housing until it clicks4. Tug gently to confirm it's locked FAQ Q: Why does this connector break?A: The original plastic fitting becomes brittle from heat cycling and vibration. It's a known weak point — many Powerstroke owners keep a spare. Q: Does this fit the 2021+ models?A: No. 2021+ models use a different fuel filter housing design. This fits 2017-2020 only. Q: Is this an OEM Ford part?A: This is an OEM-spec aftermarket replacement that matches the original HC3Z-9A564-A specifications. Q: Can I install this myself?A: Yes! No special tools needed. It's a simple snap-on fitting that takes less than 5 minutes. Q: What symptoms indicate this connector is failing?A: Diesel fuel smell under the hood, visible fuel leak at the filter housing, or the connector feels loose.

Read more less

R12T Fuel Filter Water Separator — Complete Combo Kit R12T Marine Fuel Water Separator — 10 Micron, 30 GPH, Replaces Racor S3240 / 120AT, NPT ZG1/4-19. Fits gas & diesel engines on boats, trucks, tractors, and generators. Complete combo kit includes the spin-on filter housing, two inlet/outlet fittings, two plugs, and a reusable clear nylon collection bowl with self-venting drain valve. 📋 Key Takeaways ✅ Complete combo kit — no separate parts to buy ✅ 10-micron filtration — removes water and particles down to 10 microns ✅ 30 GPH flow rate — supports engines up to 300HP ✅ NPT ZG1/4-19 ports with M18×1.5 center thread ✅ Reusable nylon collection bowl with self-venting drain valve ✅ Replaces Racor S3240, 120AT, Sierra 18-7987, RK10222 Features & Benefits Feature Benefit 10-Micron Filtration Media Captures emulsified water and fine particles before they reach your injectors — prevents injector seizure and CP4 pump failure 30 GPH Flow Rate Supports high-performance and fleet diesel engines without fuel starvation Clear Nylon Collection Bowl Visual inspection of water accumulation at a glance — no guesswork needed Self-Venting Drain Valve Tighten to seal, release to drain — service in under 2 minutes without tools Dual-Sided Port Configuration Inlet/outlet can run same-side or opposite-side to fit any engine bay layout Powder-Coated Steel Housing Electrostatic coating resists corrosion from saltwater, road salt, and diesel fuel Spin-On Design Tool-free filter replacement — just spin off the old, spin on the new Compatibility & Cross-Reference Part Number Brand R12T / 120AT Racor / Parker S3240 Racor 18-7987 Sierra Marine RK10222 Sierra Common Applications Diesel trucks — Duramax, Powerstroke, Cummins fuel system protection Marine engines — Yanmar, Volvo Penta, Mercury, Yamaha outboard/inboard Agricultural equipment — Kubota, John Deere, CAT, Case IH tractors Generators — Cummins Onan, CAT standby generators Off-road equipment — excavators, skid steers, bulldozers Specifications Part Number FJ-R12T (iFJF) Filter Type Spin-On Fuel Filter / Water Separator Micron Rating 10 Micron Flow Rate 30 GPH (114 LPH) Port Size NPT ZG1/4-19 (M18×1.5 Center Thread) Bowl Material Clear Nylon (Reusable, Self-Venting) Housing Material Powder-Coated Steel (Corrosion Resistant) Includes 1× Filter Assembly, 2× Fittings, 2× Plugs, 1× Nylon Bowl Why Choose iFJF? We built the R12T to match — and in many ways exceed — the OEM Racor specification. Every unit is: 🔍 Factory-tested for 10-micron filtration efficiency and 30 GPH flow rate 🛡️ Powder-coated inside and out for rust-free service life in marine environments 📦 Ready to install — includes fittings, plugs, and drain bowl in one box 💰 Priced for boat and fleet owners — premium filtration without the OEM markup Want to see how the R12T stacks up against the genuine Racor? Read our R12T vs Racor 120A comparison review → Looking for the upgradable R12H system (replace only the filter element, not the whole housing)? Check out the R12H Filter Element here → Frequently Asked Questions What's the difference between R12T and R12H? The R12T is a complete disposable filter assembly — when it clogs, you replace the entire unit including the housing. The R12H system is upgradeable: you keep the aluminum housing and only swap the filter cartridge. If you do frequent filter changes, the R12H upgrade pays for itself within 2-3 services. Does this fit my boat/diesel engine? The R12T fits any engine with NPT ZG1/4-19 (M18×1.5 center thread) ports. It's commonly used on Yanmar, Volvo Penta, Mercury, Cummins, and Kubota engines. The 30 GPH flow rate supports engines up to approximately 300HP. If you're unsure about fitment, contact us with your engine model. How often should I replace the R12T filter? Replace every 100-200 hours of engine operation, or annually — whichever comes first. In marine environments or if you use biodiesel, inspect the clear bowl at every fill-up and drain water as needed. Visual inspection: if the bowl shows more than 1/2" of water or the filter media appears dark/saturated, replace immediately. How do I drain water from the R12T bowl? Simply loosen the drain valve at the bottom of the clear nylon bowl — water and contaminants will drain out by gravity. Tighten the valve to seal. No tools required. Pro tip: keep a small catch cup under the bowl before opening the valve to avoid diesel on your bilge or garage floor. Can I use this with biodiesel? Yes — the R12T is compatible with B5-B20 biodiesel blends. However, biodiesel tends to hold more dissolved water than petroleum diesel, so we recommend more frequent bowl draining (every 25-50 hours) when running biodiesel. The powder-coated steel housing resists the higher corrosion potential of biodiesel blends. What cross-reference replacements match this filter? This R12T replaces: Racor S3240 / 120AT, Sierra 18-7987 / RK10222. It shares the same 10-micron rating, NPT ZG1/4-19 port size, and 30 GPH flow rate as the OEM Racor unit — at a more competitive price point. How do I install the R12T fuel filter assembly? Remove the old filter by spinning it counterclockwise (have a catch pan ready for residual fuel) Clean the mounting bracket surface and apply a thin film of diesel to the new filter's gasket Screw in the two inlet/outlet fittings (choose same-side or opposite-side configuration) Install the two plugs in the unused ports Spin the new R12T onto the mounting head clockwise until the gasket contacts, then tighten 3/4 turn by hand — do not overtighten Prime the system using the manual primer pump and check for leaks at all four ports Package Includes 1 × R12T Fuel Filter / Water Separator Complete Assembly 2 × NPT ZG1/4-19 Inlet/Outlet Fittings 2 × NPT ZG1/4-19 Plugs 1 × Clear Nylon Collection Bowl with Self-Venting Drain

Read more less

Replace Part Number: 140-3116,1403116. Fitment: Compatible with Onan RV QG 5500/7000, Marquis Gold/RV QG, Marquis Platinum QG EFI and generator models HGJAA, HGJAB, HGJAC. High-Quality Material: Made of high-quality filter paper and metal mesh, providing excellent engine protection. Resistant to wear and easy to install. Performance: 140-3116 Air filter helps eliminate debris from the carburetor and engine, replace regularly to ensure engine performance and extend engine life. Package include：1* 140-3116 air filter.

Read more less

Fitment:68065612AA Fuel Filter Canister Housing Cover Cap for Ram 6.7L Cummins Diesel Engine 2500 3500 4500 5500 2010-2018Replacement part number:68065612AAPackage Includes:A CAP ONLY.Anodized black.(Your new filter comes with o ring, so we don’t provide it)Advantage:Our cap is carefully crafted with CNC billeted aluminum for longer-lasting durability and reliability over your standard plastic cap.Easy to install:Without the OEM cap’s rounded edges you can simply use a 1 1/8" socket wrench to remove your old cap and screw your new cap on its place.

Read more less

Feature:High quality assurance,Providing the best filter performance,Built to match your exact requirements. Note:Maintenance intervals is 150 hours or one year. Interchange Part Number: 122-0836, 01220836, B7238, 84398, PH2875, LF16165, PH10027, LF644, 57398. Compatible Generator Models Oil Filter for RV QG 5500/7000 Series, Emerald Advantage, Marquis Gold, Marquis Platinum HGJAA(Spec A-K): Carb, LP Liquid, LP Vapor HGJAB(Spec A-K): Carb, LP Liquid, LP Vapor HGJAC(Spec A-K): EFI, LP Liquid, LP Vapor Package include: 1pcs 122-0836 and 1pcs o-ring Location and Specification The oil filter is located underneath and screwed in the hole like the picture showed. Height:4.72”[120mm] Outside Diameter:2.67”[68mm] Thread:M20*1.5

Read more less

R12H Filter Element 2-Pack — Double the Protection, Half the Hassle Stock up and save with the iFJF R12H 10-micron replacement filter element twin pack. Keep one on your boat and one in your maintenance kit — never run your engine with a clogged filter again. Designed exclusively for the R12H aluminum fuel water separator assembly. Why Buy the 2-Pack? 💰 Save vs. Buying Singles — Two elements at a bundled price beats buying individually. ⛵ Always Ready at Sea — Keep a spare onboard. When water contamination hits mid-voyage, you can swap in minutes. 🔧 Fleet & Workshop Friendly — If you maintain multiple boats, diesel trucks, or equipment, the 2-pack keeps your service bay stocked. 📦 Free Storage — Filter elements don't expire. Buy now, use when you need them. Key Features 10-Micron Advanced Filtration — Removes water and contaminants as small as 10 microns from your fuel system. Precision Fit for R12H Assembly — Drop-in replacement, zero modifications required. 15 GPH Flow Rate — Maintains full fuel flow for high-performance marine and diesel applications. High-Capacity Media — Extended service life compared to generic alternatives. Genuine iFJF Quality — Not a generic substitute. Engineered to the exact specifications of our R12H system. Compatibility ⚠️ Exclusively for iFJF R12H Fuel Water Separator Assembly. Not compatible with sealed R12T units. Replaces filter cartridges in assemblies that match S3240, 120AT, 18-7987, RK10222 form factors. Specifications Pack Size 2 Filter Elements Filtration Rating 10 Micron Compatible Assembly iFJF R12H Fuel Water Separator Flow Rate 15 GPH (per element, in R12H assembly) Replaces Part # S3240 · 120AT · 18-7987 · RK10222 Recommended Interval Every 100 hours or annually per element Installation — Quick & Simple Shut off fuel supply to the R12H assembly Unscrew the aluminum housing Remove the old filter element (firm push required) Lubricate the O-rings with clean fuel Insert the new element, reassemble, and fill with fuel Start engine — done in under 10 minutes! Frequently Asked Questions Q: Two elements — how long will they last?A: With recommended 100-hour replacement intervals, a 2-pack covers up to 200 operating hours or 2 years of seasonal boating. Q: Buy 2-pack or single?A: If you plan on keeping your boat/truck for more than one season, the 2-pack saves you money plus you always have a spare. Need just one? Single pack here. Q: Don't have the R12H assembly yet?A: Get the complete R12H combo here — includes the aluminum housing + 3 filter elements + all fittings. Complete Your Setup 🛒 R12H Complete Assembly — The full system with aluminum housing 🛒 Single Filter Element — Individual replacement cartridge R12T Fuel Filter Water Separator Complete Combo Kit →

Read more less

Component:A combination of 1 x TP3018 fuel filter,1 x 12642623 fuel filter head,1 x 12639277 water in fuel indicator sensor. Fitment:2004-2013 Duramax 6.6L Chevrolet Silverado and GMC Sierra Engine Chevy fuel filter.Will work on 2001 2002 2003 2004 But the hoses do need to be modified or lengthened. TP3018 fuel filter:The independent filter Fits 2004-2016 lly,lbz,chevy silverado duramax fuel filter.Multi Layer Filter Media.filter element 5 micron.Water separation efficiency 98%. 12642623 Fuel filter head:Made of billet aluminum,electrophoresis process to protect it from oxidation and corrosion,easy to clean.Includes a heater plug.The aluminum air bleeder screw on the head which replaced plastic OEM screw was more durable. Water in fuel indicator sensor:Fit 2001-2011,8 sided desigh,which is not same as OEM’s 12 sided.Let the Engine Control Unit(ECU) and/or dashboard lamp indicator know when water detection has occurred in the vehicle's fuel supply.

Read more less

Marine-Grade Fuel Water Separator — Protect Your Engine, Save on Maintenance R12H Marine Fuel Water Separator — 10 Micron, 15 GPH, Aluminum Alloy, Replaces Racor S3240 / 120AT, NPT ZG1/4-19. Upgraded detachable filter element design: replace only the cartridge, keep the housing — saves up to 60% vs. disposable units. Complete kit includes aluminum housing, 3 filter elements, 4 O-rings, 2 inlet/outlet fittings, and 2 plugs. Key Features Detachable Spin-On Design — Replace only the filter element, not the entire unit. Quick tool-free cartridge swaps. Aluminum Alloy Body + Powder Coating — Superior corrosion resistance against seawater and harsh marine environments. Built to outlast iron/steel alternatives. 15 GPH High Flow Rate — Engineered for high-performance marine and diesel applications. Maintains fuel pressure under load. 10-Micron Advanced Filtration — High-capacity filter media removes water and particles as small as 10 microns for clean, water-free fuel delivery. Transparent Nylon Collection Bowl with Drain Valve — Visually inspect water accumulation and drain with a simple twist of the black valve. What's Included (Complete Combo) 1 x R12H Fuel Water Separator Assembly (aluminum housing + base) 3 x Filter Elements (1 installed + 2 bonus spares) 4 x O-Rings (2 installed + 2 bonus spares) 2 x NPT/ZG1/4-19 Connection Fittings 2 x Plugs for unused ports Installation Instructions Specifications Model R12H (R12T Upgrade) Material Aluminum Alloy + Powder Coating Flow Rate 15 GPH (57 LPH) Filtration 10 Micron Port Size NPT / ZG1/4-19 Filter Type Spin-On, Replaceable Cartridge Replaces Part # S3240, 120AT, 18-7987, RK10222, R12T Applications Marine boats, diesel trucks, generators, oil storage equipment Easy Installation — No Professional Tools Required (Boats) Designed for DIY boat owners. Comes with detailed step-by-step instructions: Apply fuel to both O-rings for lubrication before assembly Mount the unit securely — use screws on a wood board (min 1cm) with marine adhesive if you prefer not to drill into your boat Fill the filter housing completely with fuel before starting the engine to prevent air-lock Periodically check the collection bowl and drain accumulated water via the drain valve For automotive/diesel truck installation, professional installation is recommended. Frequently Asked Questions Q: What is the difference between R12H and R12T?A: The R12T has a sealed, non-removable filter element — you must replace the entire housing. The R12H has a detachable cartridge: keep the housing, replace only the internal filter, saving you money every service. Q: Will this fit my boat?A: As long as you have sufficient mounting space, it works for boats, cars, diesel trucks, and fuel storage equipment. Ports: NPT/ZG1/4-19. Q: Why won't my engine start after installation?A: You must fill the filter housing completely with fuel before starting. An empty filter causes air-lock and starting failure. Q: How often should I replace the filter element?A: Every 100 hours of operation or annually, whichever comes first. Check the transparent bowl regularly for water accumulation. Q: Is this compatible with Racor / Sierra / Yamaha systems?A: This replaces S3240 and 120AT filter elements commonly used across marine brands. Verify your port size (NPT/ZG1/4-19) and mounting space before ordering. WHOLESALE INQUIRIES Bulk pricing available for marine dealers, fleet operators, and distributors. Contact us for wholesale discounts. R12T Fuel Filter Water Separator Complete Combo Kit →

Read more less

Product Overview The S3213 fuel water separator with clear drain bowl gives you instant visual confirmation of your fuel condition — no tools, no disassembly, no guesswork. A quick glance at the transparent nylon bowl tells you whether water has accumulated in the filter. Same 10-micron filtration media and 3/8" NPT fit as the standard S3213, now with a built-in drain valve for fast water purging. If you've ever wondered whether your fuel filter actually has water in it, this is the upgrade that answers that question in seconds. Key Features Clear Nylon Drain Bowl: Visually check for water accumulation without removing the filter. Catch water contamination before it reaches your injectors. Built-In Drain Valve: Purge accumulated water in seconds — no tools needed. Just open the valve, drain until clean fuel flows, close it, and you're done. 10-Micron Filtration Media: Same trusted S3213 filtration performance. Traps water droplets, rust, and debris down to 10 microns. 3/8" NPT Inlet/Outlet: Direct replacement for OEM filter heads. Uses standard marine fuel line fittings. Includes Mounting Bracket: Comes with the 18-7853-1 style mounting bracket and hardware — bolt-on ready out of the box. Compatibility & Fitment Brand Part Numbers Replaced Mercury / Mariner 35-60494-1, 35-809097, 802893Q01, 35-807172 Sierra Marine 18-7928-1, 18-7932-1, 18-7922, 18-7919 Mallory 9-37801, 9-37802 Moeller / Tempo 033510-10, 035613-10 GLM Marine 24960, 24961 Wix Filters 33264, 33265 Universal Cross-Ref S3213, S3214, B32013, C14568 Fits most Mercury, Mariner, Yamaha, Suzuki, Honda, and Tohatsu outboard motors with 3/8" NPT fuel connections, 1990-present. Specifications Specification Value Filter Type Fuel Water Separator with Clear Drain Bowl Micron Rating 10 Micron Port Size 3/8" NPT (Inlet & Outlet) Bowl Material Clear Nylon (UV-Stabilized, Ethanol-Resistant) Canister OD 3.0" (76 mm) Overall Height (incl. bowl) ~6.5" (165 mm) Replacement Interval 50-100 Hours or Annually Included Components Filter Assembly, Clear Bowl, Drain Valve, Mounting Bracket, Gasket, Hardware Why Choose This Filter The clear bowl is not a gimmick — it's a genuine time-saver and safety feature. Before every outing, you can verify fuel condition in under 10 seconds. No unthreading the filter, no catching fuel in a cup, no guessing. Every S3213 assembly ships from US inventory with a 30-day satisfaction guarantee. Most orders ship same-day. Frequently Asked Questions Q: How do I know when to drain the bowl? A: Check the clear bowl before each outing. If you see a visible water layer forming at the bottom (water sinks below fuel), open the drain valve and let it empty until clean fuel flows. The clear bowl makes this a 10-second pre-trip ritual. Q: Will the clear bowl crack or yellow over time? A: The R25T-style nylon bowl is UV-stabilized and ethanol-resistant. With normal care it should last multiple seasons. If it eventually clouds or develops a crack, replacement bowls are available separately in our store. Q: What's included in the box? A: Complete S3213 filter assembly with clear bowl, drain valve, mounting bracket with 3/8" NPT ports, installation gasket, and mounting hardware. Everything needed for a bolt-on installation. Q: Does the drain bowl fit a standard sealed S3213? A: No — the bowl threads onto the bottom of this specific S3213 assembly body. The sealed one-piece S3213 does not have a threaded bowl port. If you want a bowl setup, this is the correct product. Q: Is this compatible with ethanol-blended fuel (E10)? A: Yes. The clear nylon bowl, internal seals, and filtration media are all designed to handle E10 and non-ethanol marine fuel without degradation. Q: How is this different from the upgraded replaceable-filter S3213? A: This is a traditional sealed filter assembly — you replace the entire unit at service time. The upgraded version (linked below) has a reusable aluminum housing with replaceable internal cartridges. Both include a clear bowl. Choose based on whether you prefer lower upfront cost or lower long-term cost. Q: Can I replace just the filter element inside? A: No — this S3213 is a sealed assembly. The entire canister is replaced at service time. If you want a serviceable filter where you only swap the cartridge, see our upgraded S3213 below. 🔄 Upgrade Available: Replaceable Filter S3213 We now offer an upgraded S3213 with a replaceable filter element — lower long-term cost, less waste. Same 10-micron filtration, same 3/8" NPT fit. Upgraded S3213 ($27.99) → — Replaceable element, includes clear bowl Replacement Cartridge ($10.00) → — Single 10-micron filter element 3-Pack Cartridges ($19.00) → — Best value at $6.33 each

Read more less

Includes:Automotive Replacement Filter.Replaces R12T S3240 120AT,Replaces 18-7947,Replaces RK10222. R12T Replacement filter of Marine Fuel Filter Water Separator NPT,ZG1/4-19.It can be used for diesel. Filters are designed for high performance applications,and with flow rate of 15 GPH on the R12T model,your engine will perform better than ever with clean,water-free fuel. Don't be caught in the water without one of these diesel spin-on filters.Filter Rating:10 Micron. Fuel Water Separator Filter fit 3/8 Inch NPT Outboard Motors as well. R12T Fuel Filter Water Separator Complete Combo Kit →

Read more less

491 Fuel Tank Filter Bowl Wrench for 495-4 Hyaline Perfect A | iFJFHigh-quality Fuel Filter Wrench replacement from iFJF. 491 Fuel Tank Filter Bowl Wrench for 495-4 Hyaline Perfect A.Key Features OEM-spec quality and fit Durable construction for long service life Direct replacement — no modifications needed Q: Is this OEM quality?A: Yes, manufactured to meet or exceed OEM specifications.Q: Fast shipping?A: Yes, ships from iFJF warehouse within 1 business day.

Read more less

Fuel Filter Head Assembly for 2005-2013 Duramax 6.6LThis complete fuel filter head assembly replaces the failure-prone factory unit on 2005-2013 Duramax trucks. The aluminum construction eliminates the cracking issues of the OEM plastic housing, and the integrated hand priming pump makes fuel system bleeding quick and tool-free.Key Features Aluminum Construction — Replaces plastic OEM housing that cracks over time Built-in Hand Primer — Bleed the fuel system without tools after filter changes Includes Bleeder Screw — Integrated air bleeder for complete system priming Heating Element Ready — Compatible with factory fuel heater connection Direct Fit — Replaces GM 12642623 for 2005-2013 Duramax LLY/LBZ/LMM Compatibility Year Engine Models 2005-2013 6.6L Duramax LLY/LBZ/LMM Silverado 2500HD/3500HD, Sierra 2500HD/3500HD FAQQ: Why do the stock housings fail?A: The OEM plastic filter head becomes brittle from heat cycling and can crack at the threads or bleeder screw boss.Q: Does this fit the LML (2011-2016)?A: No. The LML uses a different filter housing design. This fits LLY/LBZ/LMM (2005-2013) only.Q: Is the hand primer difficult to use?A: No — simply pump it 10-15 times after a filter change to prime the system. Much easier than cycling the key.Q: Does it come with the mounting gasket?A: Yes, the complete assembly includes the housing, primer pump, bleeder screw, and mounting gasket.

Read more less

Fuel Filter Assembly for 1992-2002 Chevy GMC 6.5L Diesel — Suburban, Silverado, Sierra, Tahoe, Yukon, Hummer H1 Looking for a fuel filter for your Chevy Suburban 6.5 diesel? Or maybe a GMC Sierra 2500 6.5 diesel fuel filter? This assembly fits them all. Whether you drive a 1994 K2500 work truck, a 1998 Suburban family hauler, a 1995 Tahoe, or a Hummer H1, this complete fuel filter assembly replaces your worn-out filter housing, heater, and filter element in one bolt-on job. OEM part number: 10226035. If your current filter housing is cracked, leaking fuel, has a failed heater connector, or the water-in-fuel sensor is malfunctioning — replacing the entire assembly is more reliable (and often cheaper in labor) than piecing together individual components. This kit includes the filter head, metal housing with integrated fuel heater, mounting bracket, water sensor port, and a fresh filter element — all pre-assembled and ready to bolt on. Why Replace the Whole Assembly? The GM 6.5L diesel's fuel filter housing is a known failure point on high-mileage trucks. The plastic OEM housings warp over time from engine heat, causing air intrusion and hard-starting issues. The fuel heater element can short out, and the threaded fittings can strip. A complete assembly swap solves all these problems at once — and this aftermarket unit uses a metal housing that outlasts the factory plastic design. ⓘ Fitment Note: This assembly fits 1992-2002 GM trucks and SUVs with the 6.5L V8 diesel (engine codes L49/L56/L57/L65). It also fits some 5.7L and 7.4L diesel/gas applications that used this filter style. Not compatible with 2001+ Duramax 6.6L (LB7/LLY/LBZ/LMM/LML/L5P) — those use a completely different filter system. Key Features All-in-One Kit — Filter head, metal housing, fuel heater with connector, water-in-fuel sensor port, mounting bracket, O-rings, and filter element — everything pre-assembled Metal Housing Construction — Far more durable than OEM plastic under sustained engine bay heat and vibration Integrated Fuel Heater — Prevents fuel gelling in cold weather; essential for winter operation in northern climates Water-in-Fuel Sensor Port — Retains factory WIF sensor functionality; compatible with original wiring connector 30-Micron Filtration Media — Cellulose/synthetic blend filter element traps contaminants before they reach the injection pump and injectors Pre-Threaded Mounting Points — Direct bolt-on — no drilling, tapping, or modifications needed Reusable Housing — When it's time for a filter change, just swap the TP1256 replacement element — no need to replace the entire assembly Complete Vehicle Compatibility Chevrolet Model Years Engine Notes Blazer (Full-Size K5) 1992–1999 6.5L V8 Diesel K5 Blazer / Tahoe predecessor C1500 / Silverado 1500 1992–1999 6.5L V8 Diesel 2WD 1/2-ton pickup C1500 Suburban 1992–1999 6.5L V8 Diesel 2WD 1/2-ton SUV C2500 / Silverado 2500 1992–2000 6.5L V8 Diesel 2WD 3/4-ton pickup C2500 Suburban 1992–1999 6.5L V8 Diesel 2WD 3/4-ton SUV C3500 / Silverado 3500 1992–2002 6.5L V8 Diesel 2WD 1-ton pickup C3500HD 1992–2002 6.5L V8 Diesel 2WD heavy-duty chassis cab Express 1500/2500/3500 1996–2002 6.5L V8 Diesel Full-size van G20 / G30 1992–1996 6.5L V8 Diesel Predecessor to Express van K1500 / Silverado 1500 4WD 1992–1999 6.5L V8 Diesel 4WD 1/2-ton pickup K1500 Suburban 1992–1999 6.5L V8 Diesel 4WD 1/2-ton SUV K2500 / Silverado 2500 4WD 1992–2000 6.5L V8 Diesel 4WD 3/4-ton pickup K2500 Suburban 1992–1999 6.5L V8 Diesel 4WD 3/4-ton SUV K3500 / Silverado 3500 4WD 1992–2002 6.5L V8 Diesel 4WD 1-ton pickup P30 1992–1999 6.5L V8 Diesel Forward-control chassis (step van/motorhome) Tahoe (2-door & 4-door) 1995–1999 6.5L V8 Diesel Full-size SUV GMC Model Years Engine Notes C1500 / Sierra 1500 1992–1999 6.5L V8 Diesel 2WD 1/2-ton pickup C1500 Suburban 1992–1999 6.5L V8 Diesel 2WD 1/2-ton SUV C2500 / Sierra 2500 1992–2000 6.5L V8 Diesel 2WD 3/4-ton pickup C2500 Suburban 1992–1999 6.5L V8 Diesel 2WD 3/4-ton SUV C3500 / Sierra 3500 1992–2002 6.5L V8 Diesel 2WD 1-ton pickup C3500HD 1992–2002 6.5L V8 Diesel Heavy-duty chassis cab G2500 / G3500 1992–1996 6.5L V8 Diesel Full-size van K1500 / Sierra 1500 4WD 1992–1999 6.5L V8 Diesel 4WD 1/2-ton pickup K1500 Suburban 1992–1999 6.5L V8 Diesel 4WD 1/2-ton SUV K2500 / Sierra 2500 4WD 1992–2000 6.5L V8 Diesel 4WD 3/4-ton pickup K2500 Suburban 1992–1999 6.5L V8 Diesel 4WD 3/4-ton SUV K3500 / Sierra 3500 4WD 1992–2002 6.5L V8 Diesel 4WD 1-ton pickup P3500 1992–1999 6.5L V8 Diesel Forward-control chassis Savana 1500/2500/3500 1996–2002 6.5L V8 Diesel Full-size van Yukon (2-door & 4-door) 1992–1999 6.5L V8 Diesel Full-size SUV AM General Model Years Engine Hummer H1 1994–2001 6.5L V8 Turbo Diesel Cross-Reference Part Numbers GM OEM: 10226035, 10154635, 10183997, 25176756 Aftermarket: TP1256, BF1201, P550352, FS1295, PS7358 ACDelco: TP1256, 33376, 33976 WIX: 33379 NAPA: 3960 Other: 5742602, XF54719, F54719 Technical Specifications Specification Detail Filtration Rating 30 Micron (nominal) Filter Media Cellulose / synthetic blend Housing Material Metal (steel) with corrosion-resistant coating Fuel Heater Integrated 12V heating element with OEM-style connector WIF Sensor Port Compatible with factory water-in-fuel sensor Inlet/Outlet Size 3/8\" quick-connect (matches OEM) Filter Replacement Interval Every 10,000-15,000 miles Weight Approx. 2.6 lbs (1.17 kg) Installation Overview Relieve fuel system pressure and disconnect battery Disconnect fuel lines (quick-connect fittings) and WIF sensor connector Remove mounting bolts from old filter housing bracket Install new assembly — bolts directly to factory mounting points Reconnect fuel lines, WIF sensor, and heater connector Prime fuel system by cycling ignition key (ON for 10 seconds, OFF, repeat 3-4 times) Start engine and check for leaks at all connections ⚠️ Torque Warning: When tightening the filter cap onto the housing, hand-tighten firmly then add no more than 1/4 turn with a wrench. Over-tightening is the #1 cause of cap leaks and difficult future filter changes. The O-ring does the sealing — not raw torque. FAQ Q: Will this fit my 1994 Chevy K2500 with the 6.5L turbo diesel?A: Yes. This assembly directly fits all 1992-2002 GM C/K 1500, 2500, and 3500 series trucks with the 6.5L V8 diesel engine, including your 1994 K2500. Q: Does this include the filter element?A: Yes. The assembly comes with a filter element pre-installed. When it's time for your next filter change, you can purchase our replacement filter element (sold individually or in value packs of 3-pack and 6-pack). Q: My truck has a hard start and loses prime overnight. Will this fix it?A: Very likely yes. Air intrusion through a cracked filter housing or failed O-rings is one of the most common causes of hard starting and prime loss on the GM 6.5L diesel. Replacing the complete assembly with new seals and housing eliminates these leak paths. Also check your lift pump and fuel lines if the problem persists. Q: Is the fuel heater functional?A: Yes. The integrated 12V fuel heater uses the OEM-style connector and activates automatically in cold temperatures to prevent fuel gelling and improve cold-start performance. It's essential if you operate in winter conditions. Q: How does this compare to the OEM plastic housing?A: The original GM housing (ACDelco 10226035) is plastic and known to warp, crack, and leak over time — especially on high-mileage trucks. This aftermarket replacement uses a metal housing that's significantly more durable under sustained engine bay heat. It meets or exceeds OEM filtration specifications at a fraction of the dealer price. Q: Do I need to bleed the fuel system after installation?A: Yes. After installation, cycle the ignition key to the ON position (not START) for 10 seconds, then OFF for 5 seconds. Repeat 3-4 times. This runs the lift pump and purges air from the system. You should hear the pump pitch change when air is purged. Then start the engine and let it idle for 2-3 minutes while checking for leaks. Q: Will this fit my 2003 Duramax?A: No. This assembly is for the 6.5L diesel (1992-2002). Duramax 6.6L engines (2001+) use an entirely different filter system. Please check our Fuel Filter collection for Duramax-compatible options. Q: What's the difference between the filter element and the full assembly?A: TP1256 is the filter element (the replaceable cartridge with cap and gasket). 10226035 is the complete assembly — housing, heater, bracket, and filter element together. This product is the complete assembly. If you only need replacement filter elements, see our TP1256 filter element multipacks. 📦 Need Replacement Filters? Save on future filter changes with our TP1256 filter element value packs: Single TP1256 Filter Element — $22.99 3-Pack Value Bundle — Save 27%, $49.99 6-Pack Best Value — Save 36%, $87.99 ($14.67/filter) For full installation instructions, see our DIY fuel filter replacement guide with step-by-step video.

Read more less

Product Overview The S3213 fuel water separator is your outboard motor's first line of defense against water-contaminated fuel — the #1 cause of on-water engine failure. This sealed one-piece spin-on filter uses 10-micron filtration media to trap water droplets, rust particles, and debris before they reach your Mercury, Yamaha, or other outboard engine. Standard 3/8" NPT inlet/outlet ports make it a direct bolt-on replacement for dozens of OEM and aftermarket part numbers. No adapters, no modifications — spin off the old filter, spin on the S3213, and you're protected. Key Features 10-Micron Filtration: Traps water and contaminants down to 10 microns — fine enough to catch the debris that clogs carburetors and injectors. 3/8" NPT Standard Ports: Fits the most common marine fuel system thread size. Direct fit for Mercury, Yamaha, Suzuki, and Honda outboard applications. Sealed One-Piece Design: No internal cartridge to service — replace the entire unit in minutes. Ideal for boaters who want a simple, no-fuss maintenance routine. Corrosion-Resistant Exterior: Coated canister built to withstand saltwater spray and humid bilge conditions season after season. Wide Cross-Reference: Replaces over 20 OEM and aftermarket part numbers across multiple marine brands (see fitment table below). Compatibility & Fitment Brand Part Numbers Replaced Mercury / Mariner 35-60494-1, 35-809097, 802893Q01, 35-807172 Sierra Marine 18-7928-1, 18-7932-1, 18-7922, 18-7919 Mallory 9-37801, 9-37802 Moeller / Tempo 033510-10, 035613-10 GLM Marine 24960, 24961 Wix Filters 33264, 33265 Universal Cross-Ref S3213, S3214, B32013, C14568 Fits most Mercury, Mariner, Yamaha, Suzuki, Honda, and Tohatsu outboard motors with 3/8" NPT fuel connections, 1990-present. Specifications Specification Value Filter Type Spin-On Fuel Water Separator Micron Rating 10 Micron Port Size 3/8" NPT (Inlet & Outlet) Canister OD 3.0" (76 mm) Canister Height 4.5" (114 mm) Replacement Interval 50-100 Hours or Annually Design Sealed One-Piece (Non-Serviceable) Why Choose This Filter Every S3213 we sell ships from US inventory — no 3-week overseas wait times. Each unit is individually sealed and pressure-tested before it leaves our warehouse. We stand behind our products with a 30-day satisfaction guarantee and responsive US-based support. Most orders placed before 2 PM ship same-day. Frequently Asked Questions Q: Does this filter have a water drain bowl? A: No — this is the sealed one-piece S3213 with no drain bowl. If you want a clear bowl for visual water checks, see our S3213 with Clear Bowl or the upgraded replaceable-element S3213 linked below. Q: What's the difference between S3213 and S3214? A: The S3213 has a 3.0" OD canister (~4.5" tall). The S3214 is a physically larger filter with a wider body. Both share the same 3/8" NPT threads and 10-micron rating. The S3213 is the most common fit for outboard applications. Q: How often should I replace this filter? A: Replace every 50-100 engine hours, or at minimum once per boating season. Replace immediately if you notice hard starting, engine surging, or visible water in your fuel system. Q: Does this fit my Mercury outboard? A: Yes — this directly replaces Mercury/Mariner part numbers 35-60494-1, 35-809097, and 802893Q01. Fits most 2-stroke and 4-stroke outboards from 1990-present with 3/8" NPT fuel connections. Q: Is this filter suitable for saltwater use? A: Absolutely. The corrosion-resistant exterior coating is specifically designed for saltwater marine environments. The filtration media is unaffected by humidity or salt air. Q: Can I use this on a diesel engine? A: This 10-micron filter is optimized for gasoline outboard applications. For diesel engines, we recommend a 2-micron water separator for finer filtration. Q: Do I need a separate mounting bracket? A: This filter spins onto your existing S3213 mounting bracket (3/8" NPT thread). If you need a replacement bracket, we stock those separately — see our 18-7853-1 bracket listing. 🔄 Upgrade Available: Replaceable Filter S3213 We now offer an upgraded S3213 with a replaceable filter element — lower long-term cost, less waste. Same 10-micron filtration, same 3/8" NPT fit. Upgraded S3213 ($27.99) → — Replaceable element, includes clear bowl Replacement Cartridge ($10.00) → — Single 10-micron filter element 3-Pack Cartridges ($19.00) → — Best value at $6.33 each

Read more less

For R12T Marine Fuel Filter/Water Separator complete assembly.NPT,ZG1/4-19.(Port/Connecting Size M18 X 1.5 Center Thread)(Include 2 fittings,2 plugs).Part Number:Replaces S3240 R12T 120AT;Replaces Sierra 18-7987;Replaces RK10222. Reusable clear nylon collection bowl and features a self-venting drain and plug for removing unwanted impurity and water. Tighten the valve,the water will not discharge.Release the valve,the water can be free to discharge. Benefits:Can work under high temperature and pressure.Reliability and durability. Package:1 x Nylon See-thru Collection Bowl with o-ring. R12T Fuel Filter Water Separator Complete Combo Kit →

Read more less

R12H Replacement Filter Element — Keep Your Marine Fuel System at Peak Performance This is the genuine iFJF R12H 10-micron replacement filter cartridge, designed exclusively for the R12H fuel water separator assembly. Unlike the older R12T (which forces you to replace the entire housing), the R12H system lets you swap only the filter element — saving you money every service while maintaining the same high-performance filtration. Key Features 10-Micron High-Capacity Filtration — Advanced filter media captures water and particles as small as 10 microns, ensuring clean, water-free fuel reaches your engine. Drop-In Replacement for R12H Assembly — Designed to fit the iFJF R12H aluminum housing perfectly. No modifications, no adapters needed. Cost-Effective Maintenance — Replace only the filter element, not the entire unit. A $13.99 cartridge vs. replacing a whole separator system. Marine & Diesel Ready — Built for the demands of saltwater marine environments, diesel trucks, generators, and fuel storage equipment. High Flow Design — Maintains 15 GPH flow rate when installed in the R12H assembly, ensuring consistent fuel delivery under load. Compatibility — Fits ONLY the iFJF R12H Assembly ⚠️ Important: This filter element is designed exclusively for the iFJF R12H fuel water separator housing. It replaces internal cartridges in assemblies that fit S3240, 120AT, 18-7987, and RK10222 form factors. ✅ Compatible with: iFJF R12H Fuel Water Separator Assembly ❌ NOT compatible with: Older R12T sealed units (the R12T cannot accept replacement cartridges) Specifications Product R12H Replacement Filter Element (1 Pack) Filtration Rating 10 Micron Compatible Assembly iFJF R12H Fuel Water Separator (Aluminum Housing) Replaces Part # S3240 · 120AT · 18-7987 · RK10222 (filter element only) Flow Rate 15 GPH (when installed in R12H assembly) Material High-efficiency cellulose/synthetic blend filter media Recommended Replacement Interval Every 100 hours of operation or annually When to Replace Your Filter Element 🔴 Engine hesitation or power loss under load 🔴 Visible water in the transparent collection bowl 🔴 More than 100 operating hours since last change 🔴 Annual preventive maintenance schedule 🔴 After any fuel contamination event Frequently Asked Questions Q: Will this fit the older R12T unit?A: No. The R12T is a sealed unit with a non-removable filter — you must upgrade to the R12H assembly to use replacement cartridges. This is why the R12H saves you money long-term. Q: How do I install the replacement element?A: 1) Shut off fuel supply. 2) Unscrew the R12H housing. 3) Remove old element (may require firm push). 4) Insert new element. 5) Lubricate O-rings with clean fuel. 6) Reassemble and fill with fuel before starting. Q: How many elements come in this package?A: This is a single (1-pack). We also offer a cost-saving 2-pack. Q: Do I have the R12H assembly?A: If your fuel water separator has a detachable aluminum housing with a replaceable internal cartridge, you have the R12H. Need the assembly? Shop here. Complete Your Fuel System 🛒 R12H Complete Assembly — The full aluminum housing + 3 elements combo 🛒 2-Pack Filter Elements — Save more with a twin pack 📖 See our 20K-view customer review: R12T vs R12H comparison & install guide → R12T Fuel Filter Water Separator Complete Combo Kit →

Read more less

GF652 / FF5026 Professional Inline Fuel Filter The GF652 (FF5026) inline fuel filter is a universal-fit replacement for millions of GM trucks and SUVs from 1988-2006. With a durable metal housing and high-flow design, this filter provides reliable fuel filtration for both gasoline and diesel applications. Key Features Metal Housing Construction — More durable than plastic alternatives; withstands under-vehicle conditions High-Flow Design — Supports engines up to 500+ HP without restriction Universal Fit — 3/8" inlet/outlet fits most GM truck and SUV fuel lines Effective Filtration — Removes rust, dirt, and debris from fuel before it reaches your injectors Direct Replacement — Cross-references GF652, FF5026, 33481, G3727 Compatibility Year Make Models 1988-1999 Chevrolet / GMC C1500, C2500, C3500, K1500, K2500, K3500 1995-2004 Chevrolet Tahoe, Suburban, Blazer 1999-2006 Chevrolet / GMC Silverado 1500, Sierra 1500, 2500HD FAQ Q: How often should I replace this filter?A: Every 15,000-30,000 miles or annually. Replace immediately if you experience power loss or hesitation. Q: Does this work with E85 or biodiesel?A: Yes. The metal housing and internal components are compatible with ethanol blends and biodiesel up to B20. Q: Is installation difficult?A: No. It's a simple inline filter swap — disconnect the old filter, connect this one, secure the bracket. Basic hand tools only.

Read more less

Fuel Filter & Cap Kit for 1999-2003 Ford 7.3L PowerstrokeComplete fuel filter and cap kit for 1999-2003 Ford 7.3L Powerstroke diesel. Includes FD-4596 filter element, F81Z-9G270-BA cap, and new O-ring.Q: How often change?A: Every 15,000 miles or at each oil change interval.Q: Fits 6.0L?A: No — this is for the 7.3L Powerstroke (1999-2003) only.

Read more less

Fuel Filter Housing Cap for 2017-2020 Duramax 6.6L L5P The OEM plastic fuel filter housing cap on 2017-2020 Duramax 6.6L L5P engines is a known failure point — cracking, warping, and leaking under heat cycling and repeated service. Our CNC-machined billet 6061-T6 aluminum cap with black anodized finish eliminates this problem permanently. Replaces GM part number 134001. Key Features CNC Billet 6061-T6 Aluminum — Precision machined from aircraft-grade aluminum, far stronger than the OEM injection-molded plastic cap. Black Anodized Finish — Corrosion-resistant coating stands up to diesel fuel, road salt, and under-hood heat cycling. OEM-Plus Design — Engineered to match factory fit and function while eliminating the cracking/leaking failure mode. Threads perfectly onto the stock filter housing. Complete Kit — Includes 1 billet aluminum cap and 1 drain plug. (O-ring sold separately or reuse existing.) Easy Install — Direct bolt-on replacement. No modifications, no special tools. 10-minute swap. Compatibility Year Make Model Engine 2017-2020 Chevy Silverado 2500HD 6.6L V8 Diesel (L5P) 2017-2020 Chevy Silverado 3500HD 6.6L V8 Diesel (L5P) 2017-2020 GMC Sierra 2500HD 6.6L V8 Diesel (L5P) 2017-2020 GMC Sierra 3500HD 6.6L V8 Diesel (L5P) Specifications Material: CNC Billet 6061-T6 Aluminum Finish: Black Anodized Replaces OEM: 134001 Package: 1x Housing Cap + 1x Drain Plug Why Choose iFJF? The OEM plastic cap on your Duramax 6.6L L5P sees extreme temperatures, diesel fuel exposure, and removal/reinstallation at every filter change. Over time, the plastic fatigues — and when it cracks, you lose fuel pressure, leak diesel, or get stranded. Our billet aluminum cap is a one-time upgrade that outlasts the truck. IATF 16949 certified manufacturing. Backed by our satisfaction guarantee. Frequently Asked Questions Q: Why does the OEM plastic cap fail?A: The GM factory cap is injection-molded plastic that degrades under heat cycling and repeated removal. Diesel fuel exposure accelerates cracking. This is a well-documented problem on 2017-2020 L5P engines — many owners replace it preventatively. Q: Is this a direct fit or do I need modifications?A: Direct bolt-on replacement. The threads, sealing surface, and drain plug are precision-machined to match the factory housing exactly. No adapters, no modifications. Q: Does this come with the O-ring?A: The cap does not include the O-ring. We recommend reusing your existing O-ring if it's in good condition, or purchasing a new OEM O-ring separately. Q: Will this fit a 2016 Duramax LML?A: No. This cap is designed specifically for the 2017-2020 L5P fuel filter housing. LML (2011-2016) uses a different filter housing design. Q: How do I install this?A: Remove the old plastic cap with a 36mm socket, unscrew the drain plug, transfer it to the new cap, thread the new cap on hand-tight + 1/4 turn with the socket. Cycle the key 3-5 times to prime, then start and check for leaks. 10-minute job. Q: What torque should I use?A: Hand-tighten, then 1/4 turn with a 36mm socket. Approximately 18-22 ft-lbs. Do NOT overtighten — the aluminum threads are strong but the housing seal is what does the work. 📖 Read our complete Duramax L5P Fuel Filter Replacement Guide →

Read more less

Cross Reference Numbers: A0001421089, U58/9KIT, 2265672,2265673, 2655824, 1421089, UF106 4388378, 6051964. And more in details. Fit for: Perfect fit for Detroit Diesel, EVOBUS, Cummins, BOMAG, CLAAS, DAF TRUCKS, HILITE, PACCAR, SCANIA, Terex, DENNIS BUS. Premium quality: The urea filter for vehicles adopts high-quality filter paper, which is durable, wear-resistant, and has a long service life. Package Include: 1*Urea Filter; 3*Mounting Accessories.

Read more less

iFJF TP1015 Fuel Filter — 5-Micron Absolute Protection for Your Duramax L5P Already running an upgraded billet aluminum housing cap? Excellent choice. Now keep it fed with the iFJF TP1015 replacement fuel filter element — the same 5-micron absolute-rated filter that ships in our combo kits, sold standalone for customers who already made the cap upgrade. Same filtration. Same Viton O-rings. Same CP4.2 pump protection. Just the filter, no cap included. Engineered for 2017–2020 Chevy Silverado & GMC Sierra 2500HD/3500HD with the 6.6L L5P Duramax diesel engine, the TP1015 delivers filtration performance that leaves the OEM ACDelco paper element in the dust — literally. If your current filter has 15,000+ miles on it, you're overdue. 📊 TP1015 vs. OEM ACDelco Filter Element Specification iFJF TP1015 OEM ACDelco TP1015 Micron Rating 5 Micron (Absolute) 7–10 Micron (Nominal) Filter Media Multi-Layer Synthetic Blend Cellulose Paper Water Separation 98% Efficiency ~95% Efficiency O-Ring Material 2 × Viton® (Diesel-Rated, 400°F) 1 × Standard Nitrile Dirt-Holding Capacity 2× OEM Capacity Baseline Price $17.99 $29–$42 🚛 Compatible Vehicles Chevrolet Silverado 2500HD / 3500HD 2017 · 2018 · 2019 · 2020 6.6L L5P Duramax Turbo Diesel V8 GMC Sierra 2500HD / 3500HD 2017 · 2018 · 2019 · 2020 6.6L L5P Duramax Turbo Diesel V8 Also Fits: Chevy Cruze 2.0L Diesel (2014–2015), Chevy Cruze 1.6L Diesel (2017–2019) 🔢 Cross-Reference / Replaces OEM Part Numbers iFJF: TP1015 ACDelco: TP1015 · 22937279 GM Genuine: 23456595 · 23304096 ⚙️ Technical Specifications Filter Media: Multi-layer synthetic blend with hydrophobic barrier layer — traps particles down to 5μm while repelling water droplets from the fuel stream Filtration Rating: 5 micron absolute (β≥1000) — captures 99.9% of particles ≥5μm. OEM paper filters are rated nominally at 7–10μm, meaning they let significantly more particulate through to your CP4.2 high-pressure pump Water Separation: 98% removal efficiency — the hydrophobic layer strips emulsified water from diesel fuel, critical for protecting the CP4.2 injection pump from cavitation erosion and catastrophic failure O-Rings: 2 premium Viton® fluoroelastomer O-rings (1 × large cap seal, 1 × small filter seal) — rated to 400°F continuous, compatible with ULSD, B20 biodiesel, and common diesel fuel additives Service Interval: Replace every 15,000–22,500 miles (24,000–36,000 km). Reduce to 15,000 miles if towing heavy, extended idling, or running biodiesel blends Filter Construction: Spiral-wound pleated media with epoxy-sealed end caps — no bypass valve failures, consistent flow under high fuel demand 📦 What's in the Box 1 × TP1015 Fuel Filter Element (multi-layer synthetic blend media, 5μm absolute) 2 × Viton® O-rings (large cap seal + small filter seal) 1 × Installation instruction card ⚠️ Housing cap NOT included — this is the filter element only. If you need a cap upgrade, see our Silver Cap Kit or Black Cap Kit. 🛠️ Installation Tips PRIME THE FILTER: Fill the new filter with clean diesel before installing. A dry filter means a dry CP4.2 on first start — and that can lead to a $4,000+ pump replacement. LUBE THE O-RINGS: Apply a thin film of clean diesel or silicone grease to both O-rings. Dry O-rings can pinch, tear, or roll during installation — all of which cause air leaks and hard-start conditions. TORQUE TO SPEC: If you're using the OEM plastic cap, torque to 18 ft-lbs (25 N·m) — no more. If you're using an iFJF billet aluminum cap, the same torque spec applies, but the aluminum cap won't crack if you go slightly over. BLEED THE SYSTEM: After installation, cycle the key to "ON" (without cranking) 3–5 times. You'll hear the in-tank lift pump cycle. The L5P fuel system is self-priming — no manual bleeding required. LEAK CHECK: Start the engine and inspect the filter housing area. Any dampness around the cap seal means the O-ring isn't seated. Shut down, reseat, and retorque. ❓ FAQ Q: Will this fit my 2017–2020 Duramax L5P? A: Yes — as long as your truck uses the cartridge-style fuel filter housing (GM part #134001 housing). This filter fits all 2017–2020 Silverado/Sierra 2500HD/3500HD with the 6.6L L5P engine. Also fits Chevy Cruze 1.6L/2.0L diesel models. Q: How often should I replace the fuel filter? A: GM recommends every 22,500 miles. We recommend every 15,000 miles if you tow heavy, idle frequently, or run any biodiesel blends. The TP1015 has 2× the dirt-holding capacity of the OEM filter, but diesel fuel quality varies — err on the side of more frequent changes. Q: Can I use this TP1015 filter with the OEM plastic cap? A: Yes, the TP1015 filter element is a direct dimensional match for the OEM housing. However, the factory plastic cap is a known failure point (GM TSB #18-NA-103). We strongly recommend upgrading to our 6061-T6 billet aluminum cap for permanent peace of mind. Q: Will using this aftermarket filter void my factory warranty? A: No. Under the Magnuson-Moss Warranty Act (15 U.S.C. § 2302), a manufacturer cannot void your warranty for using aftermarket parts unless they prove the aftermarket part directly caused the failure. The iFJF TP1015 meets or exceeds all OEM filtration specifications — GM would have a very hard time making that case. 🛒 Complete Your Fuel System Upgrade This filter is just one piece of the L5P fuel system puzzle: Need the billet cap? Silver 134001 Cap + TP1015 Kit — $69.99, includes filter + CNC 6061-T6 cap Prefer stealth black? Black 134001 Cap + TP1015 Kit — $69.99, same premium kit in black anodized finish Due for an air filter too? TP1015 + A3231C Air Filter Combo — $37.99, both filters in one order Just need the air filter? A3231C Air Filter — $29.99, high-flow drop-in replacement for 2017–2019 L5P ⚠️ IMPORTANT: Always prime the fuel filter with clean diesel before installation. A dry-start on the CP4.2 high-pressure fuel pump can cause catastrophic failure — a $4,000+ repair you don't want.

Read more less

HFCM Wiring Harness for 2003-2007 Ford 6.0L PowerstrokeThe HFCM (Horizontal Fuel Conditioning Module) wiring harness connects the fuel pump to the vehicle's electrical system. When this harness corrodes or chafes, it causes intermittent no-start, stalling, and fuel pump failure codes. This plug-and-play replacement restores reliable fuel pump operation.Key Features Direct OEM Replacement — Matches Ford 6C3Z-9F759-A specifications Weather-Sealed Connectors — Prevents moisture intrusion and corrosion Plug-and-Play — No splicing or wire modification needed Complete Harness — Includes both connectors and full wire length Compatibility Year Engine Models 2003-2007 6.0L Powerstroke V8 F-250, F-350, F-450, F-550 Super Duty, Excursion (2003-2005) FAQQ: What symptoms indicate a bad HFCM harness?A: Intermittent no-start, engine stalling, P0231/P0232 fuel pump circuit codes, or visible corrosion at the connector.Q: Will this fix my no-start?A: If the no-start is caused by a corroded or damaged HFCM harness — yes. This is a common failure point on 6.0L trucks.Q: Do I need to drop the fuel tank?A: No. The HFCM is mounted on the frame rail under the driver's door. Accessible without dropping the tank.

Read more less

Ford 6.0L Powerstroke HFCM Fuel Manifold — Fix the Cracked Drain Plug The HFCM Fuel Manifold (6C3Z-9B249-A) is the direct replacement for the cracked, leaking fuel conditioning module manifold on 2003-2007 Ford 6.0L Powerstroke engines. If your HFCM drain plug won't seal or fuel is leaking from the module, this is the fix. Why HFCM Manifolds Fail The HFCM is mounted on the driver-side frame rail, exposed to road salt, water, and debris. The OEM manifold's water drain plug threads are the weak point — they corrode, strip, or crack over time. Once the threads are damaged, the drain plug won't seal, causing: Fuel leaks (fire hazard) Air intrusion (hard starting, rough idle) Water-in-fuel warning (false or real) Unable to drain water separator Specifications Part Number 6C3Z-9B249-A, HFCM Manifold Fitment 2003-2007 F-250, F-350, F-450, F-550 6.0L; 2003-2005 Excursion 6.0L Installation Bolts directly to HFCM housing — no modifications required Includes Manifold, drain plug, mounting gasket Related Parts You May Need HFCM Wiring Harness (6C3Z-9F759-A) — common failure, causes fuel pump shutoff FD-4616 Fuel Filter (2-pack) — always change filters when servicing the HFCM 6.0L HFCM Filter Cap — if the cap hex is rounded or cracked FAQ Q: How do I know if my HFCM manifold is bad? A: Look for fuel residue around the drain plug, a drain plug that won't tighten, or a persistent fuel smell from the driver-side frame rail area. Also, if you can't drain water from the HFCM because the plug won't open, the manifold threads are likely damaged. Q: Do I need to drop the fuel tank to replace the HFCM manifold? A: No — the HFCM is frame-mounted on the driver side, accessible from under the truck. Removal of the skid plate (4 bolts) is required. Total labor: 1-2 hours. Q: Can I just replace the drain plug instead of the whole manifold? A: If the threads in the manifold body are stripped or cracked, a new plug won't fix it. The manifold body is the problem. Replace it once, do it right.

Read more less

Fitment:FF63017NN and FS53029NN Fuel filter For 2016-2019 Nissan Titan XD 5.0L V8 Diesel Engines. Replace part number:Upper engine filter:4335493,4378483,16403EZ41A,FF63017NN,WF10442,PF46140.Frame rail filter:4360105,4335492,16403EZ40A,FS53029NN,WF10441. Feature:Prevents fuel problems and helps prolong the life of your engines fuel injection system.Provide high flow rates and superior filtration efficiency with a premium filtration media to help improve engine performance.High dirt holding capacity of filter elements through high filter surface area. Package includes:1 x FF63017NN fuel filter(7 Micron),1 x FS53029NN fuel filter(12 Micron),2 x O-rings. Warm Hint:Please replace the filters regularly to keep the engine in good condition.

Read more less